Extending surfactant-modified 2:1 clay minerals for the uptake and removal of diclofenac from water

Surface modification of bentonite and montmorillonite as novel nano-adsorbents for the removal of phenols, heavy metals and drug residues

Montmorillonite (Mt) is one of the eco-friendly and low-cost nano-adsorbents for water and wastewater treatment. Interactions of Mt. with various modifiers such as surfactants and polymers make it an ideal adsorbent with good selectivity for the removal of phenols, heavy metals and drug residues from water and wastewater. Surface modification can improve the adsorption potential of Mt. due to increasing the number of adsorption sites and functional groups to remove a wide variety of contaminants. This paper shows a general overview of the structure, adsorptive characteristics, and applications of Mt. and modified Mt. (m-Mt). Also, recent progress made in using of natural and modified bentonite and Mt. for removing phenols, heavy metals and pharmaceuticals from water and wastewater are explained. Furthermore, it discusses the strategies used to increase the adsorption capacity of Mt. by surface modification with cationic surfactants, acids, and polymers. This article delivers an exploration of the current uses of bentonite and Mt. for water and wastewater treatment and encouraging results obtained in this review could aid in the application Mt. and m-Mt for the recovery of high added value compounds and removal of contaminants from aquatic systems.

Organo magadiites for diclofenac adsorption: influence of the surfactant chain

The presence of drugs in aquatic environments has been considered a global challenge and several remediation technologies have been proposed, including adsorption. In this study, new diclofenac adsorbents were obtained from the reaction of sodium magadiite (Na-Mag) with surfactants dodecylpyridinium chloride hydrate (C12pyCl) and hexadecylpyridinium chloride monohydrate (C16pyCl)), 1-hexadecyltrimethylammonium bromide (C16Br), and dodecyltrimethylammonium bromide (C12Br). The synthesis was carried out in the microwave at 50 °C for 5 min using surfactant amounts of 100% and 200% in relation to the cation exchange capacity of Na-Mag. The elemental analysis indicated that surfactants with a longer organic chain were more incorporated into Na-Mag, whose values were 1.42 and 1.32 mmol g-1 for C16pyMag200% and C16Mag200%, respectively. X-ray diffraction results suggested formation of intercalated products with basal space in the range of 2.81-4.00 nm. Diclofenac was quickly adsorbed on all organophilic magadiites, at an equilibrium time of 1 min. Drug capacity adsorption was influenced by the arrangement and packing density of organic cations, the basal distance, and the organic contents of the samples at high drug concentrations. Alkylpyridinium magadiites exhibited maximum adsorption capacities higher than alkylammonium magadiites, of 96.4, 100.7, 131.7, and 166.1 mg g-1 for C12pyMag100%, C12pyMag200%, C16pyMag100%, and C16pyMag200%, respectively, at pH 6.0 and 30 °C. Diclofenac removal by samples was not affected by the presence of ibuprofen, which was also removed from binary system by organophilic magadiites reaching removal of 76.5% and 86.9% by C16pyMag100% and C16pyMag200%, respectively. Regeneration studies demonstrated a drug removal percentage of 83-92% for C16pyMag and C16Mag after three cycles of adsorption.

Physicochemical Effect on Coal Pores of Hydrocarbon Chain Length and Mixing of Viscoelastic Surfactants in Clean Fracturing Fluids

Clean fracturing fluids are environmentally friendly and could have broad applications in permeability enhancement of coal seams. The hydrophobic chain length of the viscoelastic surfactant (VES) and the mixing of VESs with different ionic types have marked effects on the performance of clean fracturing fluids. This paper analyzes the effects of the hydrocarbon chain length of VES and mixing of VESs with different ion types on the pores of coal and discusses the mechanisms controlling the pore changes from a physical and chemical perspective. We found that the coal samples treated with clean fracturing fluid B had the largest porosity change. Adding two methylene groups to the hydrocarbon chain of the cationic VES will increase clay swelling in coal treated with fracturing fluids. Adding 0.1 wt % cocoamidopropyl betaine (zwitterionic VES) to cationic VES fracturing fluids can reduce the extent of clay expansion induced by fracturing fluids. VES with a long hydrocarbon chain has a strong ability to remove kaolinite in hard coal, and the addition of zwitterion VES increases the ability of a clean fracturing fluid to remove kaolinite. These results provide theoretical guidance for the synthesis of new VES molecules and the design of new fracturing fluid formulations.

Adsorption of Non-Steroidal Anti-Inflammatory Drugs on Alginate-Carbon Composites-Equilibrium and Kinetics

In this work, alginate-carbon composites with different active carbon content were synthesized and studied by various techniques. The obtained materials can be used as adsorbents in the processes of removing organic pollutants from water. In this study, the effect of the immobilization of activated carbon in calcium alginate was investigated. Textural properties were determined by measuring low-temperature nitrogen adsorption/desorption isotherms. The largest specific surface area was recorded for ALG_C8 and amounted to 995 m2/g. The morphology of alginate materials was determined on the basis of scanning electron microscopy. The adsorption properties were estimated based on the measurements of equilibrium and adsorption kinetics. The highest sorption capacities were 0.381 and 0.873 mmol/g for ibuprofen and diclofenac, respectively. The generalized Langmuir isotherm was used to analyze the equilibrium data. A number of equations and kinetic models were used to describe the adsorption rate data, including first (FOE) and second (SOE) order kinetic equations, 1,2-mixed-order kinetic equation (MOE), fractal-like MOE equation (f-MOE), multi-exponential equation (m-exp), in addition to diffusion models: intraparticle diffusion model (IDM) and pore diffusion model (PDM). Thermal stability was determined on the basis of data from thermal analysis in an atmosphere of synthetic air.

Synergistic adsorption and degradation of diclofenac by zero-valent iron modified spent bleaching earth carbon: Mechanism and toxicity assessment

Diclofenac (DCF) is a drug compound that exists widely in water bodies, which may pose a threat to the ecological environment. In this study, spent bleaching earth (SBE) was pyrolyzed, modified with cetyltrimethylammonium bromide (CTAB) and loaded with zero-valent iron (nZVI) to obtain CTAB-SBE@C-nZVI. The effects of CTAB concentration, Fe⁰ loading, CTAB-SBE@C-nZVI dosage, and initial pH value on the removal efficiency of DCF were studied. The results showed that the DCF removal efficiency could reach a maximum of 87.0% with 2.0 g/L dosage of the optimal material, which was prepared under the conditions of 30 mmol/L CTAB concentration, 25% Fe⁰ loading, and initial pH 5. It indicated that the strong adsorption of the material and the reduction effect of nZVI can achieve high-efficiency removal of DCF. Based on the detected reaction intermediate products, four possible degradation paths were inferred. The toxicity assessment of DCF and its intermediates manifested that the degradation of DCF by CTAB-SBE@C-nZVI was a process of gradual dechlorination and toxicity reduction. CTAB-SBE@C-nZVI displayed excellent DCF removal efficiency, good stability and environmental friendliness, achieving wastes treat wastes and exhibiting good prospects.

Efficiency of the bank filtration technique for diclofenac removal: A review

Bank filtration (BF) has been employed for more than a century for the production of water with a better quality, and it has been showing satisfactory results in diclofenac attenuation. Considered the most administered analgesic in the world, diclofenac has been frequently detected in water bodies. Besides being persistent in the environment, this compound is not completely removed by the conventional water treatments, drinking water treatment plants (DWTPs) and wastewater treatment plant (WWTPs). BF has a high complexity, whose efficiency depends on the characteristics of the observed pollutant and on the environment where the system in installed, which is why this is a topic that has been constantly studied. Nevertheless, studies present the behavior of diclofenac during the BF process. In this context, this research performed the evaluation of the factors and the biogeochemical processes that influence the efficiency of the BF technique in diclofenac removal. The aerobic conditions, higher temperatures, microbial biomass density, hydrogen potential close to neutrality and sediments with heterogeneous fractions are considered the ideal conditions in the aquifer for diclofenac removal. Nonetheless, there is no consensus on which of these factors has the greatest contribution on the mechanism of attenuation during BF. Studies with columns in laboratory and modeling affirm that the highest degradation rates occur in the first centimeters (5-50 cm) of the passage of water through the porous medium, in the environment known as hyporheic zone, where intense biogeochemical activities occur. Research has shown 100% removal efficiency for diclofenac persistent to compounds not removed during the BF process. However, half of the studies had removal efficiency that ranged between 80 and 100%. Therefore, the performance of more in-depth studies on the degradation and mobility of this compound becomes necessary for a better understanding of the conditions and biogeochemical processes which act in its attenuation.

Adsorption of Sodium Diclofenac in Functionalized Palygoskite Clays

The effects of acid and organo-functionalizations on the surface of Brazilian palygorskite clay was investigated, evaluating its potential in the adsorptive capacity of the drug sodium diclofenac present in wastewaters. The modifications on the clay structure were investigated by X-ray diffraction, X-ray fluorescence, thermogravimetric, differential thermal analysis, Fourier transform infrared spectroscopy, surface area by N₂ adsorption (77.5 K) and Zeta potential. The experimental design was carried out to find the best conditions for the adsorption tests, in which concentration, mass and pH were significant. In the kinetic study, the pseudo-second-order model better described the adsorption process for acid and organo-functionalized samples. Such results indicate that the adsorption behavior probably occurs due to the phenomenon of chemisorption. Regarding the adsorption isotherms, the Langmuir model was the one that best adjusted both the experimental data of acid and the organo-functionalized samples, whose maximum adsorption capacity were 179.88 and 253.34 mg/g, respectively. This model also indicates that the sodium diclofenac is adsorbed to monolayers homogeneously through chemisorption. In general, the studied clays proved to be suitable adsorbents for the removal of sodium diclofenac.

Effects of Al substitution on sorption of diclofenac to Fe(III) (hydr)oxides: roles of phase transition and sorption mechanisms

Fe(III) (hydr)oxides commonly contained many metal impurities such as Al. The incorporation of Al might change the properties of minerals and consequently affect sorption behaviors of pollutants with polar functional groups (e.g., diclofenac (DCF)). In this study, batch experiments and microscale characterization were conducted to investigate the DCF sorption mechanisms to goethite and Al-substituted minerals. Goethite and Al-substituted products (including Al-goethite, Al-goethite-hematite, and Al-hematite) were synthesized with different Al contents (i.e., 0%, 5%, 10%, and 15% (in mol)) by co-precipitation method. Due to difference of ionic radius between Al and Fe and formation of excessive -OH, Al substitution resulted in deviation of cell parameters from the Vegard line. Al substitution caused increasing -OH in Al-goethite and phase transformation caused decreasing -OH in Al-hematite. The total -OH in minerals was positively related to DCF sorption capacity. In the lower initial concentration range (0.4-9 mg/L), the sorption distribution coefficient (Kd) values of goethite, Al-goethite, and Al-hematite were 21.98, 22.25, and 21.18 L/kg, respectively. Desorption characteristics and ion strength effects indicated that DCF sorption to minerals occurred mainly through outer-sphere complexation. Fourier transform infrared analyses revealed that H-bonds could be formed through -OH of minerals and -COOH of DCF, and the H-bond strength on Al-hematite was stronger than that on goethite/Al-goethite. In the normal environmental pH (e.g., 6.0 to 8.0), Kd values of DCF decreased linearly with increasing pH. These findings are helpful for understanding of DCF migration in environment involving Al-substituted minerals.

Linear and nonlinear investigations for the adsorption of paracetamol and metformin from water on acid-treated clay

Natural clays are considered a safe, low-cost, and sound sorbent for some pharmaceutical and body care products from water. Metformin (MF) and paracetamol (PA) are of the most consumable drugs worldwide. A portion of natural clay was treated with distilled water, and another part was treated with hydrochloric acid. The water-treated clay (WTC) and the acid-treated clay (ATC) were characterized by scanning electron microscopy-energy dispersive spectroscopy, X-ray diffraction, Fourier transforms infrared spectroscopy, and nitrogen adsorption isotherm. Batch experiments were employed to investigate the influence of contact time and solution parameters on the adsorption of PA and MF on WTC and ATC. 30 min attained the equilibrium for all sorbent-sorbate systems. Both sorbents fitted the pseudo-second-order kinetic model with a preference to the nonlinear fitting, and the mechanism of adsorption partially fitted the liquid-film diffusion model. The PA and MF adsorption on WTC and ATC fitted the Freundlich model in preference to nonlinear fitting. The adsorption of pollutants on both sorbents was spontaneous, exothermic, and physisorption in nature. Even at low concentrations, both WTC and ATC showed efficiency above 80% in removing PA and MF from tab water, groundwater, and Red seawater. These findings nominated natural clay as an alternative to the costly nanomaterials as sorbents for removing pharmaceutical contaminants from water.

Application of Ni0.5Zn0.5Fe2O4 magnetic nanoparticles for diclofenac adsorption: isotherm, kinetic and thermodynamic investigation

Ni_0.5Zn_0.5Fe₂O₄ magnetic nanoparticles were synthesized to obtain a new efficient adsorbent for diclofenac sodium (DF) removal. Fourier Transform Infrared (FTIR), Energy Dispersive Spectrometer (EDS), scanning electron microscope (SEM), Brunauer-Emmett-Teller (BET) and vibrating sample magnetometer (VSM) were applied to characterize the prepared adsorbent. These analyses revealed that adsorbent was successfully prepared with average particle diameter of about 50 nm and a BET surface area of 168.09 m²/g. The saturation magnetization value of magnetic nanoparticles (MNPs) was found to be 24.90 emu/g, thus, adsorbent was efficiently separated from the solution by a facile and rapid magnetic separation process. The effect of adsorption time, amount of adsorbent, initial pH of the solution, initial diclofenac concentration and temperature on the removal of DF were evaluated. Also, the adsorption data were best fitted to the pseudo-first-order kinetic model and Langmuir isotherm model. The thermodynamics studies suggested spontaneous and exothermic adsorption. The maximum diclofenac adsorption amount of the synthesized nanoadsorbent was 52.91 mg/g, which is higher than many recently studied adsorbents.

Effective Adsorptive Removal of Methylene Blue from Water by Didodecyldimethylammonium Bromide-Modified Brown Clay

In the present investigation, brown clay (BC) was modified with didodecyldimethylammonium bromide (DDAB) to produce a sorbent (DDAB-BC), which was characterized and applied for sorption of methylene blue (MB) from aqueous media. BC was functionalized using DDAB by cation exchange of the DDAB moiety with positive ions existing inside the interlayer spaces of the BC. X-ray diffraction (XRD) studies confirmed that the d-spacing of DDAB-BC became wider (3.39 Å) than that of BC (3.33 Å). Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) were exploited to explore the functional groups and morphological structure of sorbents, respectively. The Brunauer-Emmett-Teller (BET) surface area, pore volume, and pore diameter of DDAB-BC were determined as 124.6841 m²/g, 0.316780 cm³/g, and 8.75102 nm, respectively. Batch sorption investigations were carried out to determine the optimum experimental conditions, using the one-factor one-time procedure. The sorption of MB on DDAB-BC strongly obeyed the Langmuir isotherm and agreed well with pseudo-second-order kinetics. Sorption of MB onto DDAB-BC showed maximum efficiency (∼98%) and maximum sorption capacity (∼164 mg/g) at optimal values of pertinent factors: dye concentration (100 mg/L), pH (7), and temperature (55 °C). Sorption isothermal studies predicted that removal of MB on DDAB-BC follows multilayer sorption at higher MB dye concentrations and monolayer sorption at lower MB dye concentrations.

A Biodegradable Magnetic Nanocomposite as a Superabsorbent for the Simultaneous Removal of Selected Fluoroquinolones from Environmental Water Matrices: Isotherm, Kinetics, Thermodynamic Studies and Cost Analysis

The application of a magnetic mesoporous carbon/β-cyclodextrin–chitosan (MMPC/Cyc-Chit) nanocomposite for the adsorptive removal of danofloxacin (DANO), enrofloxacin (ENRO) and levofloxacin (LEVO) from aqueous and environmental samples is reported in this study. The morphology and surface characteristics of the magnetic nanocomposite were investigated by X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET) adsorption–desorption and Fourier transform infrared spectroscopy (FTIR). The N₂ adsorption–desorption results revealed that the prepared nanocomposite was mesoporous and the BET surface area was 1435 m² g⁻¹. The equilibrium data for adsorption isotherms were analyzed using two and three isotherm parameters. Based on the correlation coefficients (R²), the Langmuir and Sips isotherm described the data better than others. The maximum monolayer adsorption capacities of MMPC/Cyc-Chit nanocomposite for DANO, ENRO and LEVO were 130, 195 and 165 mg g⁻¹, respectively. Adsorption thermodynamic studies performed proved that the adsorption process was endothermic and was dominated by chemisorption.

Removal of Hazardous Contaminants from Water by Natural and Zwitterionic Surfactant-modified Clay

In this study, natural clay (NC) was collected from Saudi Arabia and modified by cocamidopropyl betaine (CAPB) at different conditions (CAPB concentration, reaction time, and reaction temperature). NC and modified clay (CAPB-NC) were characterized using X-ray diffraction, thermogravimetric analysis, Fourier transform infrared spectroscopy, field-emission scanning electron microscopy, and N2 adsorption at 77 K. The adsorption efficiency of NC and CAPB-NC toward Pb2+ and reactive yellow 160 dye (RY160) was evaluated. The adsorption process was optimized in terms of solution initial pH and adsorbent dosage. Finally, the adsorption kinetics and isotherms were studied. The results indicated that NC consists of agglomerated nonporous particles composed of quartz and kaolinite. CAPB modification reduced the specific surface area and introduced new functional groups by adsorbing on the NC surface. The concentration of CAPB affects the adsorption of RY160 tremendously; the optimum concentration was 2 times the cation exchange capacity of NC. The equilibrium adsorption capacity of CAPB-NC toward RY160 was about 6 times that of NC and was similar for Pb2+. The adsorption process followed the pseudo-second-order kinetics for both adsorptive. RY160 adsorption on CAPB-NC occurs via multilayer formation while Pb2+ adsorption on NC occurs via monolayer formation..

Monitoring diclofenac adsorption by organophilic alkylpyridinium bentonites

Organoclays have been applied as efficient adsorbents for pharmaceutical pollutants from aqueous solution. In this work, dodecylpyridinium chloride (C₁₂pyCl) and hexadecylpyridinium chloride (C₁₆pyCl) cationic surfactants were used for the preparation of organobentonites destined for diclofenac sodium (DFNa) adsorption, an anionic drug widely detected in wastewater. The organofunctionalization of the clay samples was performed under microwave irradiation at 50 °C for 5 min with surfactant amounts of 100% and 200% in relation to the cation exchange capacity (CEC) of the pristine bentonite. The amount of incorporated ammonium salts based on CHN elemental analysis was higher for all samples prepared with 200% of the CEC. The basal spacings of the organoclays ranged from 1.54 to 2.13 nm, indicating the entrance of organic cations into the interlayer spacing of the clay samples, and the spacing depended on the size of the alkyl organic chain. The hydrophobic character of the organobentonites was verified by thermogravimetry and infrared spectroscopy (FTIR). The adsorption isotherms showed that the drug capacity adsorption was influenced by the amount of surfactant incorporated into the bentonite, the packing density and the arrangement of the surfactants in the interlayer spacing. Zeta potential measurements of the organobentonites and FTIR analysis after drug adsorption suggested that electrostatic and nonelectrostatic interactions contributed to the mechanism of adsorption.

Performance evaluation of surfactant modified kaolin clay in As(III) and As(V) adsorption from groundwater: adsorption kinetics, isotherms and thermodynamics

In this paper surfactant modified kaolin clay for As(III) and As(V) was prepared by intercalating hexadecyltrimethylamonium bromide (HDTMA-Br) cationic surfactant onto the clay interlayers. Batch experiments were used to evaluate the effectiveness of surfactant modified kaolin clay towards As(III) and As(V) removal. The results revealed that adsorption of As(III) and As(V) is optimum at pH range 4–8. The maximum As(III) and As(V) adsorption capacities were found 2.33 and 2.88 mg/g, respectively after 60 min contact time. The data for adsorption of As(III) showed a better fit too pseudo first order model of reaction kinetics while the data for As(V) fitted better to pseudo second order model. The adsorption isotherm data for As(III) and As(V) fitted well to Langmuir model indicating that adsorption of both species occurred on a mono-layered surface. Adsorption thermodynamics model revealed that adsorption of As(III) and As(V) was spontaneous and exothermic. The presence of Mg²⁺ and Ca²⁺ increased As(III) and As(V) adsorption efficiency. The regeneration study showed that synthesized adsorbent can be used for up to 5 times with maximum As(III) and As(V) percentage removal of 54.2% and 62.33%, respectively achieved after 5^th cycle. Surfactant modified kaolin clay mineral showed higher adsorption capacity towards As(III) and As(V) as compared to unmodified kaolin clay mineral and competitive with other adsorbent in the literature. The results obtained from this study revealed that surfactant modified kaolin mineral is a candidate material for arsenic remediation from groundwater.

Biocompatible functionalisation of nanoclays for improved environmental remediation

Among the wide range of materials used for remediating environmental contaminants, modified and functionalised nanoclays show particular promise as advanced sorbents, improved dispersants, or biodegradation enhancers. However, many chemically modified nanoclay materials are incompatible with living organisms when they are used in natural systems with detrimental implications for ecosystem recovery. Here we critically review the pros and cons of functionalised nanoclays and provide new perspectives on the synthesis of environmentally friendly varieties. Particular focus is given to finding alternatives to conventional surfactants used in modified nanoclay products, and to exploring strategies in synthesising nanoclay-supported metal and metal oxide nanoparticles. A large number of promising nanoclay-based sorbents are yet to satisfy environmental biocompatibility in situ but opportunities are there to tailor them to produce "biocompatible" or regenerative/reusable materials.

Adsorption of diclofenac sodium on bilayer amino-functionalized cellulose nanocrystals/chitosan composite

Residual diclofenac sodium (DS) in the environment is harmful to human health. A promising method for DS removal is the use of adsorbents functionalized with amino groups that can form an ionic bond with the carboxyl group of DS at a suitable pH. In this work, a novel composite adsorbent composed of cellulose nanocrystals (CNC) and chitosan (CS) has been synthesized and functionalized by ethylenediamine (ED) in both layers. Characterization methods, including scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, Fourier-transform infrared spectrometry, and X-ray photoelectron spectroscopy, were used to confirm the morphology and synthetic mechanism of the double- amino-functionalized adsorbent. Based on the optimization of adsorption conditions and modeling of the adsorption mechanism, the DS adsorption process on CNC-ED@CS-ED involves chemical adsorption, and the maximum adsorption capacity obtained from the Langmuir model is 444.44 mg/g. CNC-ED@CS-ED exhibits good adsorption capacity and high sustainability; thus, it is a promising composite material for the removal of DS from wastewater.

Efficient adsorption of diclofenac sodium from aqueous solutions using magnetic amine-functionalized chitosan

In this study, we prepared a magnetic composite based on amine-functionalized chitosan (aminochitosan; AmCS) and Fe₃O₄ to remove diclofenac sodium (DS) from water. The fabricated AmCS@Fe₃O₄ composite was characterized using Fourier-transform infrared spectroscopy, transmission electron microscopy, scanning electron microscopy, vibrating sample magnetometry, X-ray diffraction, and thermogravimetric analysis. Furthermore, we investigated the influence of pH, initial DS concentration, and adsorbent dosage on the adsorption of DS. Through thermodynamic analysis, we found that the data corresponded with the Langmuir adsorption isotherm model. The maximum adsorption capacity reached 469.48 mg g^-1, and the adsorption process followed the pseudo-second-order kinetic model. Finally, the AmCS@Fe₃O₄ composite retained good adsorption characteristics after four consecutive cycles, with removal efficiency exceeding 70%. Therefore, the developed adsorbent could be used for efficient adsorptive removal of trace drugs and personal care products from water bodies.

Treatment of chemical cleaning wastewater and cost optimization by response surface methodology coupled nonlinear programming

The real alkaline cleaning wastewater (ACW) was treated by a process consisting of neutralization, NaClO oxidation and aluminum sulfate (AS) coagulation, and a novel response surface methodology coupled nonlinear programming (RSM-NLP) approach was developed and used to optimize the oxidation-coagulation process under constraints of relevant discharge standards. Sulfuric acid neutralization effectively removed chemical oxygen demand (COD), surfactant alkylphenol ethoxylates (OP-10) and silicate at the optimum pH of 7.0, with efficiencies of 62.3%, >82.7% and 94.2%, respectively. Coagulation and adsorption by colloidal hydrated silica formed during neutralization were the major removal mechanisms. NaClO oxidation achieved almost complete removal of COD, but was ineffective for the removal of surfactant OP-10. AS coagulation followed by oxidation can efficiently remove OP-10 with the formation of Si-O-Al compounds. The optimum conditions for COD ≤100 mg/L were obtained at hypochlorite to COD molar ratio of 2.25, pH of 10.0 and AS dosage of 0.65 g Al/L, with minimum cost of 9.58 $/m³ ACW. This study shows that the integrative RSM-NLP approach could effectively optimize the oxidation-coagulation process, and is attractive for techno-economic optimization of systems with multiple factors and threshold requirements for response variables.

Preparation of cationic polymeric nanoparticles as an effective adsorbent for removing diclofenac sodium from water

New cationic polymeric nanoparticles were synthesised with high adsorption capacities for diclofenac sodium and showed fast adsorption and desorption.