Photodegradation of 2-chloropyridine in aqueous solution: Reaction pathways and genotoxicity of intermediate products

Scientific opinion on the renewal of the authorisation of Smoke Concentrate 809045 (SF-003) as a smoke flavouring Primary Product

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product Smoke Concentrate 809045 (SF-003), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. Product Smoke Concentrate 809045 is obtained by pyrolysis of beech wood. The Panel concluded that the compositional data provided on the Primary Product are adequate. At the maximum proposed use levels, dietary exposure estimates calculated with DietEx ranged from 0.1 to 1.5 mg/kg body weight (bw) per day at the mean and from 0.2 to 5.2 mg/kg bw per day at the 95th percentile. The Panel concluded that eleven components in the Primary Product raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. The Primary Product contains furan-2(5H)-one and benzene-1,2-diol, for which a concern for genotoxicity was identified in vivo upon oral administration. Considering that the exposure estimates for these two components are above the threshold of toxicological concern (TTC) of 0.0025 μg/kg bw per day for DNA-reactive mutagens and/or carcinogens, the Panel concluded that the Primary Product raises concern with respect to genotoxicity.

Photocatalytic Degradation of Tetracycline under Visible Light Irradiation on BiVO4 Microballs Modified with Noble Metals

Monoclinic scheelite bismuth vanadate (BVO) microballs were prepared by a facile hydrothermal method and subsequently modified with 2 wt% of noble metals (NM = Au, Ag, Cu, Pt and Pd) by a photodeposition route. All materials were characterized by diffuse reflectance spectroscopy (DRS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FTIR). The photocatalytic performance was investigated by degradation of tetracycline antibiotic under visible light irradiation. Moreover, photocurrent generation under UV/vis was also examined. It was found that BVO modification with all tested NMs resulted in a significant improvement in photocatalytic performance. The highest activity was obtained for Cu/BVO with mainly oxidized forms of copper. Based on scavenger tests (∙O2− and ∙OH as the main responsible species for TC degradation) and redox properties, it was proposed that the Z-scheme mechanism between copper oxides and BVO was responsible for enhanced photocatalytic activity. However, the co-participation of zero-valent forms of NMs should also be considered, either as electron scavengers, plasmonic sensitizers or conductors. Presented data reveal that porous microballs, highly attractive for practical applications due to micro-sized diameter and efficient light harvesting inside the structure, could be efficiently used for environmental and energy purposes under solar radiation.

Hydrolysis and photolysis of flupyradifurone in aqueous solution and natural water: Degradation kinetics and pathway

Flupyradifurone (FPO) easily spreads to the water environment after application because of its high solubility in water (3200 mg/L, 20 °C), but as a novel neonicotinoid pesticide, its environmental fate study is still lacking. Here, laboratory experiments were conducted to investigate the degradation kinetics and pathways of FPO in aqueous solutions and natural waters. The results showed that FPO was fairly stable in water under natural conditions (the hydrolysis half-lives at 15 °C, 25 °C, and 35 °C were >150 d, and the photolysis half-lives under sunlight were >168 h). However, FPO was photodegraded rapidly under ultraviolet (UV) light (half-lives of 2.37-3.81 min). Then, indirect photolysis under UV light was examined with the addition of photosensitizers, revealing that direct photolysis is the main FPO degradation pathway in water, and the contribution of indirect photolysis was limited. Moreover, two photoproducts were separated, purified and collected via preparative HPLC, and identified via high resolution mass spectrometry. Then, the plausible photolysis pathway was proposed. The results of this study will contribute to a better understanding of the fate of FPO in the water environment.

Steric Hindrance in Metal Coordination Drives the Separation of Pyridine Regioisomers Using Rhodium(II)-Based Metal-Organic Polyhedra

The physicochemical similarity of isomers makes their chemical separation through conventional techniques energy intensive. Herein, we report that, instead of using traditional encapsulation-driven processes, steric hindrance in metal coordination on the outer surface of Rh^II -based metal-organic polyhedra (Rh-MOPs) can be used to separate pyridine-based regioisomers via liquid-liquid extraction. Through molecular dynamics simulations and wet experiments, we discovered that the capacity of pyridines to coordinatively bind to Rh-MOPs is determined by the positions of the pyridine substituents relative to the pyridine nitrogen and is influenced by steric hindrance. Thus, we exploited the differential solubility of bound and non-bound pyridine regioisomers to engineer liquid-liquid self-sorting systems. As a proof of concept, we separated four different equimolecular mixtures of regioisomers, including a mixture of the industrially relevant compounds 2-chloropyridine and 3-chloropyridine, isolating highly pure compounds in all cases.

Potential risks from UV/H2O2 oxidation and UV photocatalysis: A review of toxic, assimilable, and sensory-unpleasant transformation products

UV based advanced oxidation processes (UV-AOPs) that efficiently eliminate organic pollutants during water treatment have been the subject of numerous investigations. Most organic pollutants are not completely mineralized during UV-AOPs but are partially oxidized into transformation products (TPs), thereby adding complexity to the treated water and posing risks to humans, ecological systems, and the environment. While the degradation kinetics and mechanisms of pollutants have been widely documented, there is little information about the risks associated with TPs. In this review, we have collated recent knowledge about the harmful TPs that are generated in UV/H₂O₂ and UV photocatalysis, two UV-AOPs that have been studied extensively. Toxic and assimilable TPs were ubiquitously observed in more than 80% of UV-AOPs of organic pollutants, of which the toxicity and assimilability levels changed with variations in the reaction conditions, such as the UV fluence and oxidant dosage. Previous studies and modeling assessments showed that toxic and assimilable TPs may be generated during hydroxylation, dealkylation, decarboxylation, and deamination. Among various reactions, TPs generated from dealkylation and decarboxylation were generally less and more toxic than the parent pollutants, respectively; TPs generated from decarboxylation and deamination were generally less and more assimilable than the parent pollutants, respectively. There is also potential concern about the sensory-unpleasant TPs generated by oxidations and subsequent metabolism of microorganisms. In this overview, we stress the need to include both the concentrations of organic pollutants and the evaluations of the risks from TPs for the quality assessments of the water treated by UV-AOPs.