Poly-cyclodextrin cryogels with aligned porous structure for removal of polycyclic aromatic hydrocarbons (PAHs) from water

Composite starch films as green adsorbents for removing benzo[a]pyrene from smoked sausages

Benzo[a]pyrene (BaP), which is emitted during the processing of smoked sausages, accumulates in sausages and poses a serious threat to human health. This study focused on the removal of BaP from sausages and accompanying particulate matter (PM) during the smoking of sausages by films formed by combining corn starch (CS) with K-carrageenan (KC)/sodium alginate (SA). Initially, the effects of different additions of KC and SA on the rheological analysis, thermogravimetric analysis (TGA) and film-forming properties of the composite films were investigated. The BaP reduction capacities of CS-KC and CS-SA composite films in sausage were 41.1%-47.0% and 54.2%-56.5%, respectively, because the three-dimensional mesh structure of the composite films provided a large number of adsorption sites. Finally, kinetic studies demonstrated that BaP control in composite films is mainly achieved by intraparticle diffusion. Therefore, due to its excellent recyclability and biodegradability, composite starch film has a promising application in smoked meat products.

Single/co-adsorption and mechanism of methylene blue and lead by β-cyclodextrin modified magnetic alginate/biochar

Due to the high biological toxicity, the concurrent elimination of lead (Pb (II)) and methylene blue (MB) has become a challenging problem. Therefore, a newly β-cyclodextrin (β-CD) modified magnetic alginate/biochar (β-CD@MBC_P) material was developed. Comprehensive characterizations proved the successful coating of β-CD onto MBC_P surface by microwave-aided fabrication. The β-CD@MBC_P achieved high-efficiency uptake for contaminants under a wide pH scope. In the dual system, Pb (II) elimination was facilitated with the presence of MB, due to the active sites provided by MB. In the presence of Pb (II), MB uptake was inhibited due to the electrostatic repulsion between positively charged MB and Pb (II). Electrostatic attraction and complexation contributed to capturing Pb (II), while π-π interactions, host-guest effect, and H-bonding were important in MB elimination. After four cycles, β-CD@MBC_P maintained comparatively good renewability. Findings demonstrated that β-CD@MBC_P could be an effective remediation material for Pb (II)/MB adsorption from aqueous environments.

Reusable Cavitand-Based Electrospun Membranes for the Removal of Polycyclic Aromatic Hydrocarbons from Water

The removal of toxic and carcinogenic polycyclic aromatic hydrocarbons (PAHs) from water is one of the most intractable environmental problems nowadays, because of their resistance to remediation. This work introduces a highly efficient, regenerable membrane for the removal of PAHs from water, featuring excellent filter performance and pH-driven release, thanks to the integration of a cavitand receptor in electrospun polyacrylonitrile (PAN) fibers. The role of the cavitand receptor is to act as molecular gripper for the uptake/release of PAHs. To this purpose, the deep cavity cavitand BenzoQxCav is designed and synthetized and its molecular structure is elucidated via X-Ray diffraction. The removal efficiency of the new adsorbent material toward the 16 priority PAHs is demonstrated via GC-MS analyses at ng L^-1 concentration. A removal efficiency in the 32%, to 99% range is obtained. The regeneration of the membrane is performed by exploiting the pH-driven conformational switching of the cavitand between the vase form, where the PAHs uptake takes place, to the kite one, where the PAHs release occurs. The absorbance and regeneration capability of the membrane are successfully tested in four uptake/release cycles and the morphological stability.

Recent Advances of Porous Materials Based on Cyclodextrin

Porous materials have attracted significant attention because of their rising applications in many fields. Cyclodextrins (CDs) are suitable building units in the fabrication of porous materials owing to their intrinsic nanoporous structure, easy modification, and biocompatibility, which may result in the formation of CD-based organic frameworks (including cyclodextrin metal-organic frameworks (CD-MOFs) and cyclodextrin covalent organic frameworks (CD-COFs)), and CD-based polymer hybrid porous materials. This review focuses on the recent progress in the fabrication and applications of CD-based porous materials with novel structures and functionalities.

Removal of Cd(Ⅱ) and anthracene from water by β-cyclodextrin functionalized magnetic hydrochar: Performance, mechanism and recovery

Magnetic hydrochar modified by β-cyclodextrin (β-CD) described as β-CD@MHC was successfully synthesized and applied to simultaneous removal of cadmium (Cd) and anthracene (ANT). Characterizations attested the grafting of β-CD groups onto β-CD@MHC with excellent magnetism. Moreover, the β-CD@MHC could eliminate Cd(II) and ANT during an extensive pH scope, and presented fast adsorption equilibrium in 60 min and 80 min for Cd(II) and ANT, respectively. And the β-CD@MHC possessed prominent adsorption properties with maximum monolayer binding of 47.28 mg/g for Cd(II), and corresponding heterogeneous uptake of 60.27 mg/g concerning ANT. Furthermore, the β-CD@MHC could effectively avoid the competitive behavior between Cd(II) and ANT mainly due to complexation and electrostatic attraction effects for capturing Cd(II), and host-guest interaction in the removal of ANT. Additionally, the binding of Cd(II) and ANT onto β-CD@MHC dropped slightly after stepwise desorption, suggesting the β-CD@MHC as a high-performance adsorbent for heavy metals and PAHs elimination from wastewater.

Polymeric Materials Used for Immobilisation of Bacteria for the Bioremediation of Contaminants in Water

Bioremediation is a key process for reclaiming polluted soil and water by the use of biological agents. A commonly used approach aims to neutralise or remove harmful pollutants from contaminated areas using live microorganisms. Generally, immobilised microorganisms rather than planktonic cells have been used in bioremediation methods. Activated carbon, inorganic minerals (clays, metal oxides, zeolites), and agricultural waste products are acceptable substrates for the immobilisation of bacteria, although there are limitations with biomass loading and the issue with leaching of bacteria during the process. Various synthetic and natural polymers with different functional groups have been used successfully for the efficient immobilisation of microorganisms and cells. Promise has been shown using macroporous materials including cryogels with entrapped bacteria or cells in applications for water treatment and biotechnology. A cryogel is a macroporous polymeric gel formed at sub-zero temperatures through a process known as cryogelation. Macroporous hydrogels have been used to make scaffolds or supports for immobilising bacterial, viral, and other cells. The production of composite materials with immobilised cells possessing suitable mechanical and chemical stability, porosity, elasticity, and biocompatibility suggests that these materials are potential candidates for a range of applications within applied microbiology, biotechnology, and research. This review evaluates applications of macroporous cryogels as tools for the bioremediation of contaminants in wastewater.

Poly(β-cyclodextrin)-Activated Carbon Gel Composites for Removal of Pesticides from Water

Pesticides are widely used in agriculture to increase and protect crop production. A substantial percentage of the active substances applied is retained in the soil or flows into water courses, constituting a very relevant environmental problem. There are several methods for the removal of pesticides from soils and water; however, their efficiency is still a challenge. An alternative to current methods relies on the use of effective adsorbents in removing pesticides which are, simultaneously, capable of releasing pesticides into the soil when needed. This reduces costs related to their application and waste treatments and, thus, overall environmental costs. In this paper, we describe the synthesis and preparation of activated carbon-containing poly(β-cyclodextrin) composites. The composites were characterized by different techniques and their ability to absorb pesticides was assessed by using two active substances: cymoxanil and imidacloprid. Composites with 5 and 10 wt% of activated carbon showed very good stability, high removal efficiencies (>75%) and pesticide sorption capacity up to ca. 50 mg g-1. The effect of additives (NaCl and urea) was also evaluated. The composites were able to release around 30% of the initial sorbed amount of pesticide without losing the capacity to keep the maximum removal efficiency in sorption/desorption cycles.

Magnetic polyamidoamine dendrimer grafted with 4-mercaptobenzoic acid as an adsorbent for preconcentration and sensitive determination of polycyclic aromatic hydrocarbons from environmental water samples

Polyamidoamine dendrimer decorated Fe₃O₄ magnetic nanoparticles was synthesized and grafted with 4-mercaptobenzoic acid (4-MBA). The resulting material was utilized to develop an effective magnetic solid phase extraction method in combination with high performance liquid chromatography for trace determination of polycyclic aromatic hydrocarbons including phenanthrene (PHE), anthracene (ANT), fluoranthene (FLT), pyrene (PYR) and benzo(a)pyrene (BaP). The MNPs@G3.0@4-MBA exhibited to be an efficient extracting medium due to the existence of terminal benzene ring groups, the internal pores, and strong hydrophobic interactions and π-π interactions. The experiments demonstrated that the proposed method possessed excellent linearity in the concentration range of 0.1-300 μg L^-1 with correlation coefficients (R) larger than 0.997, and the limits of detection (LODs, S/N = 3) according to the ratio of signal to noise equal to three of PHE, ANT, FLT, PYR and BaP were 0.014 μg L^-1, 0.032 μg L^-1, 0.055 μg L^-1, 0.027 μg L^-1 and 0.039 μg L^-1, respectively. The proposed method was applied to real water samples and the spiked recoveries were over the range of 92-99%. The results showed that the method earned good repeatability and high sensitivity, and the as-prepared materials were stable and reusable, which displayed that the proposed method would have a wonderful application prospect.

Cyclodextrin-based adsorbents for the removal of pollutants from wastewater: a review

Water is a vital substance that constitutes biological structures and sustains life. However, water pollution is currently among the major environmental challenges and has attracted increasing study attention. How to handle contaminated water now mainly focuses on removing or reducing the pollutants from the wastewater. Cyclodextrin derivatives, possessing external hydrophilic and internal hydrophobic properties, have been recognized as new-generation adsorbents to exert positive effects on water pollution treatment. This article outlines recent contributions of cyclodextrin-based adsorbents on wastewater treatment, highlighting different adsorption mechanisms of cyclodextrin-based adsorbents under different influencing factors. The crosslinked and immobilized cyclodextrin-based adsorbents all displayed outstanding adsorption capacities. Particularly, according to specific pollutants including metal ions, organic chemicals, pesticides, and drugs in wastewater, this article has classified and organized various cyclodextrin-based adsorbents into tables, which could pave an intuitive shortcut for designing and developing efficient cyclodextrin-based adsorbents for targeted wastewater pollutants. Besides, this article specially discusses cost-effectiveness and regeneration performance of current cyclodextrin-based adsorbents. Finally, the challenges and future directions of cyclodextrin-based adsorbents are prospected in this article, which may shed substantial light on practical industrial applications of cyclodextrin-based adsorbents.

Polysaccharide-Based Supramolecular Hydrogel for Efficiently Treating Bacterial Infection and Enhancing Wound Healing

Nowadays, the rapid emergence of antibiotic-resistant pathogens has become a serious threat to human health. As an effective antimicrobial therapy, supramolecular materials show unprecedented advantages because of their flexible and adjustable interactions with biological molecules. Supramolecular hydrogels are now widely applied in biomedical fields because of their outstanding biocompatibility, high water content, easy preparation, and unique functions. Herein, we conveniently prepared a stable supramolecular hydrogel by simply mixing β-cyclodextrin-modified chitosan (CS-CD) with AgNO₃ in a basic environment. The obtained supramolecular hydrogel, which is positively charged and possesses numerous β-cyclodextrin cavities, could efficiently load anionic drug diclofenac sodium (DS) through the electrostatic interaction and host-guest inclusion. Significantly, the biological experiments demonstrated that this supramolecular hydrogel exhibited a high antibacterial effect and good ability of promoting wound healing owing to the cooperative contribution of CS, Ag⁺, and DS.

Magnetic solid-phase extraction as a novel method for the prediction of the bioaccessibility of polycyclic aromatic hydrocarbons

Chemical methods used to predict the bioaccessibility of hydrophobic organic compounds (HOCs) still need further development and improvement. In this work, magnetic solid-phase extraction (MSPE) based on poly(β-cyclodextrin)-coated magnetic polydopamine (Fe₃O₄@PDA@PCD) was first introduced to assess the bioaccessibility of polycyclic aromatic hydrocarbons (PAHs) in soils. Due to its good hydrophilicity and submicrometer scale, Fe₃O₄@PDA@PCD displayed a higher extraction rate for PAHs in an aqueous solution (equilibrium time < 5 min) than Tenax resin, which had an equilibrium time longer than 30 min. The merits of Fe₃O₄@PDA@PCD are beneficial to accelerate the desorption of PAHs from soil, especially for high molecular weight PAHs, in which the amounts extracted by Fe₃O₄@PDA@PCD were 1.2-2.8 times higher than those extracted by Tenax resin. The desorption kinetics data were well fitted with a two- or three-fraction model. The fitting results indicated that the MSPE method can be used to predict the bioaccessible fractions of PAHs. By comparing the prediction results obtained from the MSPE method with bioassays using earthworms, a significant linear correlation (R² = 0.98) with a slope statistically close to 1 was obtained. These results suggested that the MSPE method can act as a simple and efficient method to measure the bioaccessibility of PAHs in soil.

Fluorescence detection of phosphonates in water by a naphthalimide-based receptor and its derived cryopolymers

The concentration of compound M in cryopolymers has a dramatic influence on the fluorescence response in the presence of phosphonates.

Removal of anthracene in water by MIL-88(Fe), NH2-MIL-88(Fe), and mixed-MIL-88(Fe) metal-organic frameworks

Three adsorbents based on the metal-organic frameworks (MOFs), viz.; MIL-88(Fe), NH2-MIL-88(Fe), and mixed-MIL-88(Fe) were synthesized using a microwave-assisted solvothermal technique. The as-synthesized MOFs were characterized by X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), field emission scanning microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), and Fourier transform infrared spectroscopy (FTIR). The MOFs were shown to possess highly crystalline and porous structures with specific surface areas of 1240, 941, and 1025 m2 g-1 and pore volumes of 0.7, 0.6 and 0.6 m3 g-1 for MIL-88(Fe), NH2-MIL-88(Fe) and mixed-MIL-88(Fe), respectively. Faster removal of a model polycyclic aromatic hydrocarbon, anthracene (ANT) within 25 minutes, was achieved when these MOFs were used as adsorbents in water. The removal efficiency was 98.3, 92.4 and 95.8% for MIL-88(Fe), NH2-MIL-88(Fe) and mixed-MIL-88(Fe), respectively. The kinetics and isotherms of the process were best statistically described by pseudo-second-order and Langmuir models, respectively, while the thermodynamic studies revealed the exothermic and spontaneous nature of the process. Docking simulations were found to be consistent with the experimental results with MIL-88(Fe) showing the best binding capacity with the ANT molecule.

Rheological characterization of starch gels: A biomass based sorbent for removal of polycyclic aromatic hydrocarbons (PAHs)

Environmental awareness increased the demand for the biomass based materials with superior properties instead of petroleum products. This study aims to prepare starch networks as sorbents for the removal of polycyclic aromatic hydrocarbons (PAHs). Two types of crosslinker, epichlorohydrine (ECH) and glutaraldehyde (GA), were choosed for the preparation of Gel-E and Gel-G networks, respectively. Rheological, swelling and morphological properties of the resulted materials were investigated as a function of various reaction parameters as starch, crosslinker and base concentration and also reaction temperature. The rheological measurements showed that while network formation of Gel-E hydrogels was strongly affected by the NaOH and starch concentration, the strength of the Gel-G hydrogels mainly depends on the crosslinker amount. Starch networks showed high PAH sorption capacities up to 1.42 g per gram sorbent with three model PAH molecules. Although PAH sorption capacities of the Gel-E networks are higher than those of Gel-G gels due to the pore sizes differences of the gel samples, both of them are promising materials as biosorbent for the PAH sorption applications due to the relatively high sorption capacities, low cost and simple preparation methods.

Efficient Removal of Polycyclic Aromatic Hydrocarbons and Heavy Metals from Water by Electrospun Nanofibrous Polycyclodextrin Membranes

Here, a highly efficient membrane based on electrospun polycyclodextrin (poly-CD) nanofibers was prepared and exploited for the scavenging of various polycyclic aromatic hydrocarbons (PAHs) and heavy metals from water. The poly-CD nanofibers were produced by the electrospinning of CD molecules in the presence of a cross-linker (i.e., 1,2,3,4-butanetetracarboxylic acid), followed by heat treatment to obtain an insoluble poly-CD nanofibrous membrane. The membrane was used for the removal of several PAH compounds (i.e., acenaphthene, fluorene, fluoranthene, phenanthrene, and pyrene) and heavy metals (i.e., Pb²⁺, Ni²⁺, Mn²⁺, Cd²⁺, Zn²⁺, and Cu²⁺) from water over time. Experiments were made on the batch sorption of PAHs and heavy metals from contaminated water to explore the binding affinity of PAHs and heavy metals to the poly-CD membrane. The equilibrium sorption capacity (q _e) of the poly-CD nanofibrous membrane was found to be 0.43 ± 0.045 mg/g for PAHs and 4.54 ± 0.063 mg/g for heavy metals, and the sorption kinetics fitted well with the pseudo-second-order model for both types of pollutants. The membrane could be recycled after treatment with acetonitrile or a 2% nitric acid solution and reused up to four times with similar performance. Further, dead-end filtration experiments showed that the PAH removal efficiencies were as high as 92.6 ± 1.6 and 89.9 ± 4.8% in 40 s for the solutions of 400 and 600 μg/L PAHs, respectively. On the other hand, the removal efficiencies for heavy metals during the filtration were 94.3 ± 5.3 and 72.4 ± 23.4% for 10 and 50 mg/L solutions, respectively, suggesting rapid and efficient filtration of heavy metals and PAHs by the nanofibrous poly-CD membrane.

Dendritic mesoporous carbon nanoparticles for ultrahigh and fast adsorption of anthracene

Developing highly effective adsorbents for efficient decontamination of organic pollutants from water is an evasive aim for community well-being and environmental protection. Here, we report the successful fabrication of dendritic mesoporous carbon nanoparticles (DMCNs) as an advantageous adsorbent for ultrahigh and fast adsorption of anthracene. Dendritic mesoporous organosilica nanoparticles with an octadecyl-rich framework were utilized to synthesize DMCNs through carbonization and removal of silica. The DMCNs show a high carbon content, large mesopore volume of 1.484 cm³ g^-1 and high surface area of 1218 m² g^-1. It is revealed that both the high carbon content and highly accessible large surface area contribute to the excellent adsorption capacity towards anthracene (947.9 mg g^-1), which is significantly higher than those in previous reports. Furthermore, the large radial pores of DMCNs with bimodal pore size distributions (2.1 and 18.4 nm) and open pore channels allow fast adsorption kinetics. The developed materials hold promise as effective adsorbents for efficient remediation of organic pollutants.

Influence of Hydrogen-Bonding Additives on Electrospinning of Cyclodextrin Nanofibers

The electrospinning of highly concentrated solutions of cyclodextrin (CD) leads to bead-free nanofibers without the need of a polymeric carrier. The occurrence of numerous hydrogen bonds among CD molecules is the main driving force for their electrospinning, and hence, additives with hydrogen-bonding potential can disturb the aggregation of CD molecules and affect their electrospinning. In this study, we systematically investigated the influence of five different hydrogen-bonding additives, i.e., methylamine (MA), ethylenediamine (ED), urea, 2,2,2-trifluoroethanol (TFE), and 1,1,1,3,3,3-hexafluoroisopropanol (HFIP), on the solution behavior of hydroxypropyl-β-CD (HP-β-CD) by rheology, conductivity, and NMR analyses, and the morphology of the electrospun HP-β-CD nanofibers by scanning electron microscopy. The 1H NMR chemical shifts of the HP-β-CD protons in D2O were observed with the incorporation of hydrogen-bonding molecules due to the occurrence of intermolecular associations between HP-β-CD and additives. Dynamic light scattering measurements revealed a clear decrease in the aggregate size with the introduction of additives. Unlike other additives, which showed a general decreasing trend in viscosity with increasing additive content, the addition of MA led to a significant increase in the viscosity with increasing concentration and gave rise to HP-β-CD nanofibers at lower concentrations. The addition of low concentrations of ED, urea, TFE, and HFIP led to thinner nanofibers due to the lower viscosity of the respective solutions. Increasing additive content deteriorated the electrospinnability of HP-β-CD solutions, resulting in beaded fibers. A systematic relationship was found between the solution viscosity and morphology of the respective electrospun fibers. Overall, this study, for the first time, reports the influence of hydrogen bonding on the polymer-free electrospinning of CD molecules and shows a correlation between solution properties and morphology of their electrospun nanofibers.

Electrospinning of Cyclodextrin Functional Nanofibers for Drug Delivery Applications

Electrospun nanofibers have sparked tremendous attention in drug delivery since they can offer high specific surface area, tailored release of drugs, controlled surface chemistry for preferred protein adsorption, and tunable porosity. Several functional motifs were incorporated into electrospun nanofibers to greatly expand their drug loading capacity or to provide the sustained release of the embedded drug molecules. In this regard, cyclodextrins (CyD) are considered as ideal drug carrier molecules as they are natural, edible, and biocompatible compounds with a truncated cone-shape with a relatively hydrophobic cavity interior for complexation with hydrophobic drugs and a hydrophilic exterior to increase the water-solubility of drugs. Further, the formation of CyD-drug inclusion complexes can protect drug molecules from physiological degradation, or elimination and thus increases the stability and bioavailability of drugs, of which the release takes place with time, accompanied by fiber degradation. In this review, we summarize studies related to CyD-functional electrospun nanofibers for drug delivery applications. The review begins with an introductory description of electrospinning; the structure, properties, and toxicology of CyD; and CyD-drug complexation. Thereafter, the release of various drug molecules from CyD-functional electrospun nanofibers is provided in subsequent sections. The review concludes with a summary and outlook on material strategies.

Efficient Removal of Polycyclic Aromatic Hydrocarbons, Dyes, and Heavy Metal Ions by a Homopolymer Vesicle

It is an important challenge to effectively remove environmental pollutants such as polycyclic aromatic hydrocarbons (PAHs), dyes, and heavy metal ions at a low cost. Herein, we present a multifunctional homopolymer vesicle self-assembled from a scalable homopolymer, poly(amic acid) (PAA), at room temperature. The vesicle can efficiently eliminate PAHs, cationic dyes, and heavy metal ions from water based on π-π stacking, hydrophobic effect, and electrostatic interactions with the pollutants. The residual concentrations of PAHs, cationic dyes, and heavy metal ions (such as Ni²⁺) in water are lower than 0.60 and 0.30 parts per billion (ppb) and 0.095 parts per million (ppm), respectively, representing a promising adsorbent for water remediation. Furthermore, precious metal ions such as Ag⁺ can be recovered into silver nanoparticles by in situ reduction on the membrane of PAA vesicles to form a silver nanoparticle/vesicle composite (Ag@vesicle) that can effectively catalyze the reduction of toxic pollutants such as aromatic nitro-compounds and be recycled for more than ten times.