Sono- and photoelectrocatalytic processes for the removal of ionic liquids based on the 1-butyl-3-methylimidazolium cation

Recent progress on ultrasound-assisted electrochemical processes: A review on mechanism, reactor strategies, and applications for wastewater treatment

The electrochemical advanced oxidation processes (EAOPs) have received significant attention among the many other water and wastewater treatment technologies. However, achieving a desirable removal effect with a single technique is frequently difficult. Therefore, the integration of ultrasound technique with other processes such as electrocoagulation, electro-Fenton, and electrooxidation is a critical way to achieve effective organic pollutants decomposition from wastewater. This review paper is focused on ultrasound-assisted electrochemical (US/electrochemical) processes, so-called sonoelectrochemical processes of various organic pollutants. Emphasis was given to recently published articles for discussing the results and trends in this research area. The use of ultrasound and integration with electrochemical processes has a synergistic impact owing to the physical and chemical consequences of cavitation, resulting in enhancing the mineralization of organic pollutants. Various types of sonoelectrochemical reactors (batch and continuous) employed in the US/electrochemical processes were reviewed. In addition, the strategies to avoid passivation, enhanced generation of reactive oxygen species, and mixing effect are reviewed. Finally, concluding remarks and future perspectives on this research topic are also explored and recommended.

Mechanistic insight into ultrasound-induced enhancement of electrochemical oxidation of ofloxacin: Multi-response optimization and cost analysis

In this paper, a hybrid advanced oxidation process of sonoelectrochemical, in which ultrasound and electrochemical are applied simultaneously, has been used for the degradation of ofloxacin (bio-recalcitrant pharmaceutical pollutant). Response surface methodology based central composite design was applied to understand the parametric effects of ultrasonic power, current density, initial pH, and electrolyte dose. Enhanced ofloxacin degradation was obtained using sonoelectrochemical (≈95%) process in comparison to the electrochemical (≈60.6%) and sonolysis alone (≈7.2%) after 120 min treatment time. Multi-response optimization was used so as to maximize COD removal (70.12%) and minimize specific energy consumption (11.92 kWh (g COD removed)^-1)at the optimized parametric condition of pH = 6.3 (natural pH), ultrasonic power = 54 W, current density = 213 A m^-2, and Na₂SO₄ electrolyte dose = 2.0 g L^-1. It was revealed that ^•OH radicals contribute major to the ofloxacin degradation reaction among the other oxidizing agents. Degradation of the ofloxacin followed pseudo-first-order kinetics with a higher reaction rate, which confirmed the synergistic effect of 34% between ultrasound and electrochemical approaches. The degradation pathway of ofloxacin removal was elucidated at optimum condition by the temporal evolution of the intermediate compounds and final products using gas chromatography coupled with mass spectroscopy (GC-MS), liquid chromatography-mass spectroscopy (LC-MS), high-resolution mass spectroscopy (HR-MS), and Fourier transform infrared spectroscopy (FTIR). Atomic force microscopy (AFM) and field emission scanning electron microscope (FE-SEM) coupled with energy dispersed X-ray (EDX) were used to determine the morphology of electrodes. Operational cost analysis was done based on the reactor employed in the present study.

Improving biotreatability of hazardous effluents combining ZVI, electrolysis and photolysis

In this work, nine types of combination advanced oxidation processes/zero-valent iron (AOP-ZVI) were tested, in order to determine if any of these combinations demonstrate good chances as pretreatment for the biological degradation processes of organochlorinated pollutants. To do this, the changes undergone in the respirometric behavior, toxicity and short-term biodegradability were compared. The three AOPs studied were anodic oxidation with mixed metal oxides anodes (AO-MMO), with boron doped diamond anodes (AO-BDD) and photolysis and they were evaluated in three different modes: without any addition of ZVI, with ZVI-dehalogenation as pre-treatment and with ZVI-dehalogenation simultaneous to the AOP treatment. Clopyralid has been used as a model of chlorinated hydrocarbon pollutant. Results show that technologies proposed can successfully treat wastes polluted with clopyralid and the biological characteristics of the waste are significantly modified by dehalogenating the waste with ZVI, either previously to the treatment or simultaneously to the treatment, being the information provided by the three techniques very important in order to evaluate later combinations of the advanced oxidation technologies with biological treatments.

Cation and anion effect on the biodegradability and toxicity of imidazolium- and choline-based ionic liquids

This work studies the effect of the cation and anion on the biodegradability and inhibition of imidazolium- and choline-based ionic liquids (ILs) using activated sludge. Six commercial ILs, formed by combination of 1-Butyl-3-methylimidazolium (Bmim⁺) and N,N,N-trimethylethanolammonium (Choline⁺) cations and chloride (Cl^-), acetate (Ac^-) and bis(trifluoromethanesulfonyl)imide (NTf₂^-) anions were evaluated, all representative counter-ions with markedly different toxicity and biodegradability. Inherent and fast biodegradability tests were used to evaluate both the microorganism inhibition and the IL biodegradability. In addition, the ecotoxicological response (EC₅₀) of the ILs was studied using activated sludge and Vibrio fischeri (Microtox® test). Bmim⁺ and NTf₂^- can be considered as non-biodegradable, whereas aerobic microorganisms easily degraded Choline⁺ and Ac^-. The biodegradation pattern of each cation/anion is nearly unaffected by counter-ion nature. Moreover, concentrations of CholineNTf₂ higher than 50 mg/L caused a partial inhibition on microbial activity, in good concordance with its low EC₅₀ (54 mg/L) measured by respiration inhibition test, which alerts on the negative environmental impact of NTf₂-containing ILs on the performance of sewage treatment plants.

Understanding the adsorption of ionic liquids onto zeolite ZSM-5 from aqueous solution: experimental and computational modelling

Ionic liquids are considered as emergent pollutants as these compounds possess high persistence in aqueous solution and toxicity toward aquatic organisms. In this work, the adsorption equilibrium of 27 ionic liquids, with different cation head groups, alkyl chain lengths, and anions, onto ZSM-5 was measured experimentally at several compositions and at temperature 298.15 K and 0.1 MPa. The extensive number of ionic liquids studied allows a comprehensive study on the impact of adsorbate chemical structures toward their adsorption process. The gathered experimental results show that the anions have a dominant effect, when compared to the cation head group and the alkyl chain length, in ruling the adsorption of ionic liquids from aqueous solution onto ZSM-5. The adsorption isotherms reveal that the adsorption process is a combination between Langmuir and Freundlich behaviors, with the latter leading the general process. Moreover, computational modelling using COSMO-RS demonstrates the existence of several molecular forces that rule the adsorption process, reinforcing the idea that the ionic liquid anion rules the adsorption. The results collected in the present work provide new understanding on the molecular mechanism for the development of efficient adsorbents for removal and recovery of ionic liquids from aqueous solution.

Photostability and photocatalytic degradation of ionic liquids in water under solar light

The aim of this work is to study, (i) the photostability of different imidazolium and pyridinium ionic liquids (ILs) in water under solar light; and (ii) the photocatalytic degradation of those ILs in water with TiO₂ under solar light. The effects of the type of cation and anion as well as the length of the cationic chain of the imidazolium ILs have been analyzed. These imidazolium-based ILs show high solar stability, slightly decreasing as the length of the cationic chain increases. The anion plays a main role in the stability of ILs under solar light, decreasing in the case of hydrophobic anions. The kind of head group (pyridinium or imidazolium) or the presence of functional groups (allyl, OH) also influence the solar light stability. DFT calculations on the fundamental and excited electronic states of the ILs were carried out to obtain a deeper insight on their photostability. In the case of the photocatalytic degradation of the ILs, complete conversion was achieved for all the ILS tested but mineralization reached 80% at the most. The rate of degradation increased with the length of the alkyl chain while the anion showed little effect. The pyridinium-based IL tested was the easiest to breakdown.

The aim of this work is to study, (i) the photostability of different imidazolium and pyridinium ionic liquids (ILs) in water under solar light; and (ii) the photocatalytic degradation of those ILs in water with TiO₂ under solar light.