Cytotoxicity comparison between fine particles emitted from the combustion of municipal solid waste and biomass

Synthesis of metakaolin-based geopolymer foamed materials using municipal solid waste incineration fly ash as a foaming agent

The existence of metallic aluminum in municipal solid waste incineration fly ash (MSWIFA) makes it challenging to recycle MSWIFA into cement materials because expansion occurs in the resultant matrices. Geopolymer-foamed materials (GFMs) are gaining attention in the field of porous materials due to their high-temperature stability, low thermal conductivity and low CO2 emission. This work aimed to utilize MSWIFA as a foaming agent to synthesize GFMs. The physical properties, pore structure, compressive strength and thermal conductivity were analyzed to assess different GFMs which were synthesized with various MSWIFA and stabilizing agent dosages. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) analysis were conducted to characterize the phase transformation of the GFMs. Results showed that when MSWIFA content was increased from 20 to 50%, the porosity of GFMs increased from 63.5 to 73.7%, and bulk density decreased from 890 to 690 kg/m3. The addition of stabilizing agent could trap the foam, refine the cell size, and homogenize the cell size range. With the stabilizing agent increase from 0 to 4%, the porosity increased from 69.9 to 76.8%, and the bulk density decreased from 800 to 620 kg/m3. The thermal conductivity decreased with increasing MSWIFA from 20 to 50%, and stabilizing agent dosage from 0 to 4%. Compared with the collected data from references, a higher compressive strength can be obtained at the same level of thermal conductivity for GFMs synthesized with MSWIFA as a foaming agent. Additionally, the foaming effect of MSWIFA results from the H2 release. The addition of MSWIFA changed both the crystal phase and gel composition, whereas the stabilizing agent dosage had little impact on the phase composition.

Composition of inorganic elements in fine particulate matter emitted during surface fire in relation to moisture content of forest floor combustibles

The moisture content of combustible material on the forest floor is constantly changing due to environmental factors, which have a direct impact on the composition and emission intensity of particulate matter released during fire. In this study, an indoor biomass combustion analysis device was used to analyze the emission characteristics of fine particulate matter (PM_2.5) from combustion of herbaceous combustible materials with different moisture contents (0%, 15%, and 30%). The composition of inorganic elements in PM_2.5 (Zn, K, Mg, Ca, and other 13 measurable elements) were determined by inductively coupled plasma-mass spectrometer (ICP-MS). The results showed that the PM_2.5 emission factor increased significantly with the increase of moisture content of combustible materials in the range of 11.63 ± 0.55 for dry samples to 36.71 ± 1.21 g/kg for samples with 30% moisture content. The main elemental components of PM_2.5 were K, Zn, Ca, Mg, and Na and K, Ca, Mg, and Na emission factors increased with the increase of moisture content of combustibles. The proportion of macronutrients in PM_2.5 released by combustion of each herb increased as the moisture content increased, but the proportion of trace elements gradually decreased. There was a good correlation between elemental composition of PM_2.5 and that of herbaceous combustibles. The results provide evidence that the moisture content of combustible materials has a significant effect on the emission of inorganic elements in particulate matter, and hence cautions should be exercised during fuel reduction treatments, such as early prescribed fire.

Applications of crushing and grinding-based treatments for typical metal-containing solid wastes: Detoxification and resource recovery potentials

Metal-containing solid wastes can induce serious environmental pollution if managed improperly, but contain considerable resources. The detoxification and resource recoveries of these wastes are of both environmental and economic significances, being indispensable for circular economy. In the past decades, attempts have been made worldwide to treat these wastes. Crushing and grinding-based treatments have been increasingly applied, the operating apparatus and parameters of which depend on the waste type and treatment purpose. Based on the relevant studies, the applications of crushing and grinding on four major types of solid wastes, namely spent lithium-ion batteries (LIBs) cathode, waste printed circuit boards (WPCBs), incineration bottom ash (IBA), and incineration fly ash (IFA) are here systematically reviewed. These types of solid wastes are generated in increasing amounts, and have the potentials to release various organic and inorganic pollutants. Despite of the widely different texture, composition, and other physicochemical properties of the solid wastes, crushing and grinding have been demonstrated to be universally applicable. For each of the four wastes, the technical route that involving crushing and grinding is described with the advantages highlighted. The crushing and grinding serve either mainstream or auxiliary role in the processing of the solid wastes. This review summarizes and highlights the developments and future directions of crushing and grinding-based treatments.

Fate and emission behavior of heavy metals during hazardous chemical waste incineration

The fate and emission behavior of heavy metals (As, Cd, Co, Cr, Cu, Ni, Pb, Se, and Zn) from a hazardous chemical waste incinerator were systematically explored. The results show that the main components of incineration fly ashes and slags contain minerals such as salt, plagioclase, pyroxene, gypsum, calcite, and slaked lime. The elements As, Cd, Pb, and Se are enriched in the fly ash particles during flue gas condensation. Co and Ni are more likely to be deposited in the rotary kiln slag and cooling tower slag owing to their lower volatility. Zn, Cr, and Cu are usually volatilized into the flue gas as oxides or chlorides are condensed and enriched in the slag of the cooling tower during the flue gas cooling process. The content of As, Cd, Pb, Ni, Cr, and Se increase with decreasing fly ash particle size. After the flue gas purification equipment was employed, the concentration of particulate metals significantly reduced. In the exhaust flue gas, the concentrations of Cu and Zn are 29.85 and 28.47 μg/m³, those of As, Cr, Ni, Pb, and Se range from 2.54 to 9.25 μg/m³, and those of Co and Cd are 0.42 and 0.13 μg/m³, respectively.

Alkali and Heavy Metal Copoisoning Resistant Catalytic Reduction of NOx via Liberating Lewis Acid Sites

The catalyst deactivation caused by the coexistence of alkali and heavy metals remains an obstacle for selective catalytic reduction of NO_x with NH₃. Moreover, the copoisoning mechanism of alkali and heavy metals is still unclear. Herein, the copoisoning mechanism of K and Cd was revealed from the adsorption and variation of reaction intermediates at a molecular level through time-resolved in situ spectroscopy combined with theoretical calculations. The alkali metal K mainly decreased the adsorption of NH₃ on Lewis acid sites and altered the reaction more depending on the formation of the NH₄NO₃ intermediate, which is highly related to NO_x adsorption and activation. However, Cd further inhibited the generation of active nitrate intermediates and thus decreased the NO_x abatement about 60% on potassium-poisoned CeTiO_x catalysts. Physically mixing with acid additives for CeTiO_x catalysts could significantly liberate the active Lewis acid sites from the occupation of alkali metals and relieve the high dependence on NO_x adsorption and activation, thus recovering the NO_x removal rate to the initial state. This work revealed the copoisoning mechanism of K and Cd on Ce-based de-NO_x catalysts and developed a facile anti-poisoning strategy, which paves a way for the development of durable catalysts among alkali and heavy metal copoisoning resistant catalytic reduction of NO_x.

Thermochemical conversion of municipal solid waste into energy and hydrogen: a review

The rising global population is inducing a fast increase in the amount of municipal waste and, in turn, issues of rising cost and environmental pollution. Therefore, alternative treatments such as waste-to-energy should be developed in the context of the circular economy. Here, we review the conversion of municipal solid waste into energy using thermochemical methods such as gasification, combustion, pyrolysis and torrefaction. Energy yield depends on operating conditions and feedstock composition. For instance, torrefaction of municipal waste at 200 °C generates a heating value of 33.01 MJ/kg, while the co-pyrolysis of cereals and peanut waste yields a heating value of 31.44 MJ/kg at 540 °C. Gasification at 800 °C shows higher carbon conversion for plastics, of 94.48%, than for waste wood and grass pellets, of 70-75%. Integrating two or more thermochemical treatments is actually gaining high momentum due to higher energy yield. We also review reforming catalysts to enhance dihydrogen production, such as nickel on support materials such as CaTiO₃, SrTiO₃, BaTiO₃, Al₂O₃, TiO₃, MgO, ZrO₂. Techno-economic analysis, sensitivity analysis and life cycle assessment are discussed.

Differential Roles of Water-Insoluble and Water-Soluble Fractions of Diesel Exhaust Particles in the Development of Adverse Health Effects Due to Chronic Instillation of Diesel Exhaust Particles

Ambient fine particulate matter (PM_2.5) has a marked temporospatial variation in chemical composition, but how the composition of PM_2.5 influences its toxicity remains elusive. To explore the roles of individual PM_2.5 components in the pathogenesis following PM_2.5 exposure, we prepared water-soluble (WS-DEP) and water-insoluble (WIS-DEP) fractions of diesel exhaust particles (DEP) and performed 15-week intratracheal instillation on C57Bl/6J mice using these fractions. Their effects on pulmonary and systemic inflammation, hepatic steatosis and insulin resistance, systemic glucose homeostasis, and gut microbiota were then assessed. Compared to control, instillation of DEP or WIS-DEP, but not WS-DEP, significantly increased pulmonary inflammatory scores and expression of inflammatory markers, bronchoalveolar lavage fluid cell number, and circulating pro-inflammatory cytokines. Consistently, DEP- or WIS-DEP-instilled but not WS-DEP-instilled mice versus control had significant hepatic steatosis and insulin resistance and systemic glucose intolerance. In contrast, instillation of WS-DEP versus instillation of WIS-DEP had effects on the gut microbiota more comparable to that of instillations of DEP. The pulmonary and systemic inflammation, hepatic steatosis and insulin resistance, and systemic glucose intolerance following chronic DEP instillation are all attributable to the WIS-DEP, suggesting that PM_2.5 may have a solubility-dependent basal toxicity.

Cytotoxicity and chemical composition of women's personal PM2.5 exposures from rural China

Personal exposure PM samples aid in determining the sources and chemical composition of real-world exposures, particularly in settings with household air pollution. However, their use in toxicological research is limited, despite uncertainty regarding health effects in these settings and evidence of differential toxicity among PM_2.5 sources and components. This study used women's PM_2.5 exposure samples collected using personal exposure monitoring in rural villages in three Chinese provinces (Beijing, Shanxi, and Sichuan) during summer and winter. Water-soluble organic carbon, ions, elements, and organic tracers (e.g. levoglucosan and polycyclic aromatic hydrocarbons [PAHs]) were quantified in water and organic PM_2.5 extracts. Human lung epithelial cells (A549) were exposed to the extracts. Cell death, reactive oxygen species (ROS), and gene expression were measured. Biomass burning contributions were higher in Sichuan samples than in Beijing or Shanxi. Some PM characteristics (total PAHs and coal combustion source contributions) and biological effects of organic extract exposures (cell death, ROS, and cytokine gene expression) shared a common trend of higher levels and effects in winter than in summer for Shanxi and Beijing but no seasonal differences in Sichuan. Modulation of phase I/AhR-related genes (cyp1a1 and cyp1b1) and phase II/oxidative stress-related genes (HO-1, SOD1/2, NQO-1, and catalase) was either low or insignificant, without clear trends between samples. No significant cell death or ROS production was observed for water extract treatments among all sites and seasons, even at possible higher concentrations tested. These results support organic components, particularly PAHs, as essential drivers of biological effects, which is consistent with some other evidence from ambient PM_2.5.

Direct measurement with personal samplers captures the chemical complexity of PM_2.5 exposures better than fixed monitors. To investigate biological effects, lung cells were exposed to extracts of exposure PM_2.5 samples.

Commodity plastic burning as a source of inhaled toxic aerosols

Commodity plastic is ubiquitous in daily life and commonly disposed of via unregulated burning, particularly in developing regions. We report here the much higher emission factors (13.1 ± 7.5 g/kg) and toxicities of inhalable aerosols emitted from the unregulated burning of plastic waste based on field measurements and cellular experiments, including oxidative stress and cytotoxic tests in A549 cells. Plastic foam burning emitted aerosols possesses the highest EFs (34.8 ± 4.5 g/kg) and toxicities, which are 4.2- to 13.4-fold and 1.1- to 2.7-fold higher than those emitted from the burning of other waste types. These quantified toxicities are mainly attributed to aerosols containing carbonaceous matter, especially persistent organic pollutants, including polycyclic aromatic hydrocarbons and dioxins, which originate from incomplete combustion processes. The aerosol emission amounts were estimated from the obtained experimental results. Approximately 70.2 million tons (29%) of plastic waste was burned without regulation worldwide in 2016, leading to 0.92 ± 0.53 million tons of toxic aerosols being released into the air, a majority of which occurred in developing regions. The results indicate improved combustion technology and control strategies are urgently needed in developing regions for discarded plastic -waste to mitigate toxic exposure risks and achieve sustainable development.

No more waste at the elemental analysis of airborne particulate matter on quartz fibre filters

Particulate matter (PM) is the major environmental pollutant. Its elemental composition is routinely monitored. Inductively coupled plasma mass spectroscopy (ICPMS) is commonly applied after a PM sample has been digested by an acid during a microwave treatment. In this case, sample preparation procedure is laborious, sometimes incomplete and produces toxic waste. In this paper we show that direct sample introduction to ICPMS by laser ablation (LA-ICPMS) is of huge advantage. Minimal quantity of a sample is required for the analysis (<1 cm²) and no chemical waste is produced. The study focused on the most universal and widely used quartz fibre filter samples and we show that LA-ICPMS can be successfully applied for the determination of the elemental composition of such samples. Some effort is, however, still needed to develop an autosampler for the LA-ICPMS system and to provide commercial matrix-matched standards for this application to be implemented in environment laboratories worldwide.

The effect of toxic components on metabolomic response of male SD rats exposed to fine particulate matter

PM_2.5 pollution was associated with numerous adverse health effects. However, PM_2.5 induced toxic effects and the relationships with toxic components remain largely unknown. To evaluate the metabolic toxicity of PM_2.5 at environmentally relevant doses, investigate the seasonal variation of PM_2.5 induced toxicity and the relationship with toxic components, a combination of general pathophysiological tests and metabolomics analysis was conducted in this study to explore the response of SD rats to PM_2.5 exposure. The result of general toxicology analysis revealed unconspicuous toxicity of PM_2.5 under environmental dose, but winter PM_2.5 at high dose caused severe histopathological damage to lung. Metabolomic analysis highlighted significant metabolic disorder induced by PM_2.5 even at environmentally relevant doses. Lipid metabolism and GSH metabolism were primarily influenced by PM_2.5 exposure due to the high levels of heavy metals. In addition, high levels of organic compounds such as PAHs, PCBs and PCDD/Fs in winter PM_2.5 bring multiple overlaps on the toxic pathways, resulting in larger pulmonary toxicity and metabolic toxicity in rats than summer.

Cytotoxicity of black phosphorus quantum dots on lung-derived cells and the underlying mechanisms

Black phosphorus quantum dots (BP-QDs) are a new type of zero-dimensional (0D) nanomaterial that has been widely used due of their superior properties in many biomedical fields, but limited studies have focused on the biocompatibility of BP-QDs, particularly in the respiratory system. In this study, we investigated the potential lung cell toxicity of BP-QDs in vitro. Two human lung-derived cells, A549 and Beas-2B, were treated with 5∼20 μg/mL BP-QDs for 24 h. The results showed that BP-QDs triggered significant lung cell toxicity, including a dose-dependent decrease in cell viability, lactate dehydrogenase (LDH) leakage, cell shape changes, cellular oxidative stress and cell cycle arrest. In addition, pretreatment with the classical phagocytosis inhibitor cytochalasin D (Cyto D) alleviated the decrease in cell viability and LDH leakage induced by BP-QDs. In contrast, BP-QDs induced the production of cellular reactive oxygen species (ROS) and decreases in the glutathione level, whereas the ROS scavenger N-acetyl-L-cysteine (NAC) could protect A549 and Beas-2B cells from BP-QD-induced cellular oxidative stress. Taken together, the results from this study indicate that the potential toxic effects and mechanisms of BP-QDs in two different human lung cells should be considered to evaluate the lung cell safety of BP-QDs.

Cellular effects of PM2.5 from Suzhou, China: relationship to chemical composition and endotoxin content

Exposure to PM_2.5 can cause adverse health outcomes. In this study, we analyzed PM_2.5 samples collected from suburban and urban sites, including a traffic tunnel in Suzhou, China, for their physicochemical properties, endotoxin contents, and effects on HepG2 and A549 cells in vitro. The greatest cellular responses, including oxidative stress, cytotoxicity, genotoxicity, inflammatory, and transcriptional activation of stress-responsive genes (i.e., HSPA1A, GADD45α), were observed in cells treated with traffic tunnel PM_2.5. Cytokine expression was also measured and closely correlated with endotoxin content, while other toxic effects were largely related to PM_2.5-bound metals and polycyclic aromatic hydrocarbons (PAHs). These findings suggested that chemical and biological composition of PM_2.5, including adsorbed trace metals, PAHs, and endotoxin, may contribute significantly to their toxicity. In addition to commonly used in vitro toxicity tests, HSPA1A and GADD45α promoter-driven luciferase reporter cells may provide a potential new tool for rapid screening and quantification of PM_2.5 toxicity.

Studying the mixture effects of brominated flame retardants and metal ions by comet assay

This study was designed to evaluate the sensitivities of diverse cell lines on DNA damage effects and genotoxic effects of three brominated flame retardants (BFRs) and three metal ions (Cu²⁺, Cd²⁺, Hg²⁺) by comet assay. First, THP-1 was identified as the most sensitive cell line in terms of DNA damage among 11 kinds of cells screened. Accordingly, the THP-1 cell line was used as a model in subsequent single/combined genotoxicity tests. Single exposure tests to BFRs or metal ions revealed that the DNA damage effects increased with increasing exposure concentration. In combined exposure tests, BFRs (at concentrations of 1/2 EC₅₀) were deployed in combination with different concentrations of Cu²⁺, Cd²⁺, or Hg²⁺. The results showed that the % tail DNA values were significantly increased by most mixtures. Our findings on combined toxic effects by comet assay provide valuable information for setting valid environmental safety evaluation standards.

Short-term exposure to ZnO/MCB persistent free radical particles causes mouse lung lesions via inflammatory reactions and apoptosis pathways

Environmentally persistent free radicals (EPFRs) are easily generated in the combustion processes of municipal solid waste (MSW) and can cause adverse effects on human health. This study focuses on understanding the toxicity of EPFR particles (ZnO/MCB containing EPFRs) to human bronchial epithelial cell lines BEAS-2B and 16HBE, murine macrophages Raw264.7, and the lung of BALB/c mice after a short exposure (7 days). Exposure of BEAS-2B, 16HBE, and Raw264.7 cells to ZnO/MCB particles significantly increased the reactive oxygen species (ROS) production and perturbed levels of intracellular redox conditions (decreased the intracellular GSH level and the activity of cytosolic SOD, and stimulated oxidative stress related proteins such as HO-1 and Nrf2). EPFR particles decreased the mitochondrial membrane potential (MMP) and induced cell apoptosis, including the activation of Caspase-3, Bax, and Bcl-2 apoptotic signalling pathways. A signature inflammatory condition was observed in both cell models and the mouse model for lung lesions. Our data suggest that EPFRs in particles have greater toxicity to lung cells and tissues that are potential health hazards to human lung.

Seasonal concentration distribution of PM1.0 and PM2.5 and a risk assessment of bound trace metals in Harbin, China: Effect of the species distribution of heavy metals and heat supply

To clarify the potential carcinogenic/noncarcinogenic risk posed by particulate matter (PM) in Harbin, a city in China with the typical heat supply, the concentrations of PM_1.0 and PM_2.5 were analyzed from Nov. 2014 to Nov. 2015, and the compositions of heavy metals and water-soluble ions (WSIs) were determined. The continuous heat supply from October to April led to serious air pollution in Harbin, thus leading to a significant increase in particle numbers (especially for PM_1.0). Specifically, coal combustion under heat supply conditions led to significant emissions of PM_1.0 and PM_2.5, especially heavy metals and secondary atmospheric pollutants, including SO₄^2-, NO₃^-, and NH₄⁺. Natural occurrences such as dust storms in April and May, as well as straw combustion in October, also contributed to the increase in WSIs and heavy metals. The exposure risk assessment results demonstrated that Zn was the main contributor to the average daily dose through ingestion and inhalation, ADD_Ing and ADD_inh, respectively, among the 8 heavy metals, accounting for 51.7-52.5% of the ADD_Ing values and 52.5% of the ADD_inh values. The contribution of Zn was followed by those of Pb, Cr, Cu and Mn, while those of Ni, Cd, and Co were quite low (<2.2%).

A follow-up study on the characterization and health risk assessment of heavy metals in ambient air particles emitted from a municipal waste incinerator in Zhejiang, China

To confirm our hypothesis that inhalation might be the primary exposure route of heavy metals for children living in proximity to a municipal waste incinerator (MWI), we conducted a one-year follow up study to characterize the distributions of heavy metals featured in different types of ambient air particles, including PM₁, PM_2.5 and PM₁₀, at two exposure sites near the MWI (E1 and E2) and one control site (C) in Zhejiang, China. Particle samples were collected by a mid-volume sampler and heavy metals were determined by the inductively coupled plasma mass spectrometry method. The mass concentrations of PM₁, PM_2.5 and PM₁₀ were 52.0, 85.8 and 100.3 μg/m³ at E1 site, while the concentrations were 40.2, 92.1 and 106.6 μg/m³ at E2 site and 33.4, 55.6 and 66.1 μg/m³ at C site, respectively. Both E1 and E2 had higher PM₁, PM_2.5 and PM₁₀ levels than C site. The levels of pollution were season dependent, with autumn having the highest levels of PM₁, PM_2.5 and PM₁₀ across all three sampling sites. Regarding the distributions of heavy metals, Pb accounted for the majority of the seven metals in all groups, ranging from 43.2% to 51.3%, followed by Mn that ranged from 22.0% to 32.0%. The Pb levels of PM₁, PM_2.5 and PM₁₀ in the MWI area were 22.6, 34.2 and 36.2 ng/m³, respectively, while Mn levels were 10.1, 20.0 and 23.5 ng/m³, respectively. The health risk assessment results suggested that residents were suffering high non-carcinogenic risk posed by MWI-emitted particle-bound toxic metals, as well as the high lifetime carcinogenic risk. This study revealed that ambient air, no matter whether near or far away from an MWI, bore more PM₁, PM_2.5 and PM₁₀ particles than general, non-polluted ambient air, especially in autumn.

Biomonitoring of Metals in Children Living in an Urban Area and Close to Waste Incinerators

The impact of waste incinerators is usually examined by measuring environmental pollutants. Biomonitoring has been limited, until now, to few metals and to adults. We explored accumulation of a comprehensive panel of metals in children free-living in an urban area hosting two waste incinerators. Children were divided by georeferentiation in exposed and control groups, and toenail concentrations of 23 metals were thereafter assessed. The percentage of children having toenail metal concentrations above the limit of detection was higher in exposed children than in controls for Al, Ba, Mn, Cu, and V. Exposed children had higher absolute concentrations of Ba, Mn, Cu, and V, as compared with those living in the reference area. The Tobit regression identified living in the exposed area as a significant predictor of Ba, Ni, Cu, Mn, and V concentrations, after adjusting for covariates. The concentrations of Ba, Mn, Ni, and Cu correlated with each other, suggesting a possible common source of emission. Exposure to emissions derived from waste incinerators in an urban setting can lead to body accumulation of specific metals in children. Toenail metal concentration should be considered a noninvasive and adequate biomonitoring tool and an early warning indicator which should integrate the environmental monitoring of pollutants.

Analysis of model PM2.5-induced inflammation and cytotoxicity by the combination of a virtual carbon nanoparticle library and computational modeling

Health risks induced by PM2.5 have become one of the major concerns among living populations, especially in regions facing serious pollution such as China and India. Furthermore, the composition of PM2.5 is complex and it also varies with time and locations. To facilitate our understanding of PM2.5-induced toxicity, a predictive modeling framework was developed in the present study. The core of this study was 1) to construct a virtual carbon nanoparticle library based on the experimental data to simulate the PM2.5 structures; 2) to quantify the nanoparticle structures by novel nanodescriptors; and 3) to perform computational modeling for critical toxicity endpoints. The virtual carbon nanoparticle library was developed to represent the nanostructures of 20 carbon nanoparticles, which were synthesized to simulate PM2.5 structures and tested for potential health risks. Based on the calculated nanodescriptors from virtual carbon nanoparticles, quantitative nanostructure-activity relationship (QNAR) models were developed to predict cytotoxicity and four different inflammatory responses induced by model PM2.5. The high predictability (R² > 0.65 for leave-one-out validations) of the resulted consensus models indicated that this approach could be a universal tool to predict and analyze the potential toxicity of model PM2.5, ultimately understanding and evaluating the ambient PM2.5-induced toxicity.

miRNAs deregulation in serum of mice is associated with lung cancer related pathway deregulation induced by PM2.5

Ambient fine particulate matter (PM2.5) as an environmental pollution has been associated with the lung cancer. However, the mechanism of epigenetics such as miRNAs deregulation between PM2.5-exposure and lung cancer has not been elucidated clearly. Twenty C57BL/6 mice were divided randomly into 2 groups and exposed to the filtered air (FA) and the concentrated air (CA), respectively. The FA mice were exposed to filtered air in chambers with a high-efficient particulate air filter (HEPA-filter), and the CA mice were exposed to concentration ambient PM2.5. The total duration of exposure was performed 6 h per day from December 1st, 2017 to January 27th, 2018. The mice exposed 900.21 μg/m³ PM2.5 for 6 h per day in CA chamber, which was nearly equaled to 225.05 μg/m³ for 24-h calculatingly. After exposure, the serum miRNAs levels were detected by microarray. Genetic and pathological alterations in lung of mice with/without PM2.5 exposure were detected. 38 differential miRNAs in serum of mice were found after PM2.5 exposure for 8 weeks. Among of them, 13 miRNAs related with lung cancer were consistent in serum and lung of mice. The target genes of 13 deregulated miRNAs including CRK, NR2F2, VIM, RASSF1, CCND2, PRKCA, SIRT1, CDK6, MAP3K7, HIF1A, UBE2V2, ATG10, BAX, E2F1, RASSF5 and CTNNB1, could involve in the pathway of lung cancer developing. Compared with the FA group, the significantly increases of histopathological changes, ROS and DNA damage were observed in lung of mice in CA group. Our study suggested that miRNAs in serum could be identified as candidate biomarkers to predict the lung cancer development during early PM2.5 exposure.

Investigation of reducing particulate matter (PM) and heavy metals pollutions by adding a novel additive from metallurgical dust (MD) during coal combustion

In this study, a novel additive from metallurgical dust(MD)was applied to reduce particulate matter (PM) emissions and heavy metals pollutions during coal combustion. PM samples were collected and divided into 13 stages from 0.03 μm to 10 μm. Results showed that the irregular morphology of fine particles with equal to/less than 2.5 μm (PM_2.5), fine particles with equal to/less than 4 μm (PM₄) and fine particles with equal to/less than10 μm (PM₁₀) gradually became dense with increasing of MD content. The PM₁₀ concentration with 10% MD dosage was about 3 times higher than that of raw coal. Zn, Ti, Cu and Cr were the most abundant elements in all particulate matters (PMs), meanwhile, heavy metals accumulated into large particles with increasing MD content. The mechanism of reducing PM emissions indicated that MD reacted with nucleation elements (Pb, Cd, etc.) and trapped a large amount of alkali metal (Na/K), which aggregated into large particles. The study highlights the potential of adding MD into coal to prevent the attachment of heavy metals onto ultrafine particles, thereby reducing the heavy metals emissions.