Experimental and theoretical investigations of Cs+ adsorption on crown ethers modified magnetic adsorbent

Sensitive visual detection of norfloxacin in water by smartphone assisted colorimetric method based on peroxidase-like active cobalt-doped Fe3O4 nanozyme

Norfloxacin is widely used owing to its strong bactericidal effect on Gram-negative bacteria. However, the residual norfloxacin in the environment can be biomagnified via food chain and may damage the human liver and delay the bone development of minors. Present work described a reliable and sensitive smartphone colorimetric sensing system based on cobalt-doped Fe3O4 magnetic nanoparticles (Co-Fe3O4 MNPs) for the visual detection of norfloxacin. Compared with Fe3O4, Co-Fe3O4 MNPs earned more remarkably peroxidase-like activity and TMB (colorless) was rapidly oxidized to oxTMB (blue) with the presence of H2O2. Interestingly, the addition of low concentration of norfloxacin can accelerate the color reaction process of TMB, and blue deepening of the solution can be observed with the naked eye. However, after adding high concentration of norfloxacin, the activity of nanozyme was inhibited, resulting in the gradual fading of the solution. Based on this principle, a colorimetric sensor integrated with smartphone RGB mode was established. The visual sensor exhibited good linearity for norfloxacin monitoring in the range of 0.13-2.51 µmol/L and 17.5-100 µmol/L. The limit of visual detection was 0.08 µmol/L. In the actual water sample analysis, the spiked recoveries of norfloxacin were over the range of 95.7%-104.7 %. These results demonstrated that the visual sensor was a convenient and fast method for the efficient and accurate detection of norfloxacin in water, which may have broad application prospect.

Magnetic Prussian blue nanoshells are controllable anchored on the surface of molybdenum disulfide nanosheets for efficient separation of radioactive cesium from water

The rapid development of nuclear energy in China has led to increased attention to the treatment of radioactive wastewaters. Herein, a novel magnetic adsorbent, magnetic Prussian blue‑molybdenum disulfide (PB/Fe3O4/MoS2) nanocomposite, was prepared by a simple in-situ fixation of ferric oxide nanoparticles (Fe3O4 NPs) and Prussian Blue (PB) shell layers on the surface of molybdenum disulfide (MoS2) nanosheets carrier. The prepared PB/Fe3O4/MoS2 nanocomposites adsorbent displayed excellent fast magnetic separation and adsorption capacity of Cs+ (Qm = 80.51 mg/g) from water. The adsorption behavior of Cs+ by PB/Fe3O4/MoS2 conformed to Langmuir isothermal and second-order kinetic model, which belonged to chemical adsorption and endothermic reaction. The equilibrium adsorption capacity of PB/Fe3O4/MoS2 to Cs+ has reached 90 % in less than 110 min. Moreover, the adsorption properties of PB/Fe3O4/MoS2 remained good in the pH range of 2-7. Based on this, PB/Fe3O4/MoS2 complex was a fast and high selectivity adsorption material for Cs+, which was expected to be used in the practical treatment of cesium-containing radioactive wastewater.

Precise stepwise recovery of platinum group metals from high-level liquid wastes based on SDB polymer-modified SiO2

Accurate separation and efficient recovery of platinum group metals (PGMs, mainly Ru, Rh and Pd) from high level liquid waste (HLLW) is a good choice for clean production and sustainable development of nuclear energy. Herein a novel SDB polymer modified silica-based amine-functionalized composite (dNbpy/SiO2-P) was synthesized for the separation and recovery of PGMs. Laser particle size analysis and BET results clarified the regular spherical and highly interconnected mesoporous structure of dNbpy/SiO2-P which is critical for the separation of PGMs. The removal percent of PGMs were over 99% on the optimized conditions. In addition, dNbpy/SiO2-P showed excellent selectivity (SFPd/M > 3805, SFRu/M > 1705, SFRh/M > 336) and repeatability (≥5). Interestingly, based on the different adsorption and desorption kinetics of PGMs, a double-column strategy is designed to solve the challenge of separating and recovering PGMs from HLLW. The enrichment factors of Pd(II), Ru(III) and Rh(III) reached 36.7, 8.2, and 1.2. The adsorption of PGMs was coordination mechanism and required the involvement of NO3- to maintain charge balance. The specific distribution of elements within the adsorbents and the changes in valence state were analyzed using depth-profiling XPS. Both depth-profiling XPS results and slope analysis revealed that the complex of dNbpy and PGMs is a 1 : 1 coordination structure. Overall, this work fills the gap that PGMs cannot be effectively separated and enriched from HLLW.

Facile fabrication of Fe3O4@Mg(OH)2 magnetic composites and their application in Cu(ii) ion removal

In this study, we fabricated magnetic Fe3O4@Mg(OH)2 composites through the seed deposition technique to achieve Cu(ii) ion removal from aqueous solutions. As indicated by the characterization results, three-dimensional flower-like spheres composed of external Mg(OH)2 were formed, with nano-Fe3O4 particles uniformly embedded in the "flower petals" of the spheres. The efficacy of Fe3O4@Mg(OH)2-3 in Cu(ii) ion removal was examined through batch experiments. The impact of solution pH on removal efficiency was examined, and the pseudo-second-order model and the Langmuir model provided good fits to the adsorption kinetics and isotherm data, respectively. Remarkably, Fe3O4@Mg(OH)2-3 exhibited a significant removal capacity of 1051.65 mg g-1 for Cu(ii) ions. Additionally, the composite displayed a notable saturation magnetization value of 17.3 emu g-1, facilitating isolation from sample solutions through external magnetic fields after Cu(ii) ion absorption. At the solid-liquid interface, a mechanism involving ion exchange between Mg(ii) and Cu(ii) cations was realized as the mode of Cu(ii) ion removal. The composites' effective adsorption properties and rapid magnetic separation highlighted their suitability for use in treating copper-contaminated water.

Synthesis of crown ether-based microporous organic networks: A new type of efficient adsorbents for chlorophenols

Microporous organic networks (MONs) are a booming class of functional materials in elimination of environmental pollutants. However, the limit varieties of MONs still restrict their broad applications. Here we report the synthesis of a novel type of crown ether (CE)-based MONs via the coupling between brominated 18-crown-6 ether and different aromatic alkynyls. The constructed CE-based MONs integrates the good conjugation property of MONs and the inherent host-guest binding sites of CE, allowing the ultrafast and efficient adsorption and removal of a typical environmental priority pollutant 2,4,6-trichlorophenol (2,4,6-TCP). The hydrophobic CE-based MONs can also address the recovery challenge of unstable discrete CE in most organic and inorganic solvents. All CE-based MONs displayed fast adsorption kinetics (< 3 min) and large adsorption capacities (229.1-341.7 mg g^-1) for 2,4,6-TCP. The CE-based MONs also gave stable adsorption capacities for 2,4,6-TCP in pH range of 4.0-6.0, NaCl concentration of 0-40 mg L^-1, HA concentration of 0-30 mg L^-1, or H₂O₂ ratio of < 5 %. Density functional theory calculation, Fourier transform infrared and X-ray photoelectron spectra evaluation revealed adsorption process involved hydrophobic, π-π and hydrogen bonding interactions. The CE-based MONs also showed favorable reusability and good adsorption for other toxic chlorophenols. This work highlights the potential of CE-based MONs in contaminants elimination.

Cell-inspired selective potassium removal towards hyperkalemia therapy by microphase-isolated core-shell microspheres

Hyperkalemia is a common metabolic problem in patients with chronic kidney disease. Although oral medications and hemodialysis are clinically applied for lowering serum potassium, the intrinsic limitations encourage alternative therapy in the trend of adsorbent-based miniaturized blood purification devices. Cells serve as the biological K⁺ storage units that accumulate K⁺ through multiple mechanisms. Inspired by cells, our strategy aims at favorable permeation and enrichment of K⁺ in the microsphere. We incorporate cation-affinitive groups into core-shell structures with submicron-sized phase separation. These nano-spaced side-groups cooperate to form interlinked clusters, where crown ethers with Angstrom-scale ring for size-matched complexation, while ionic sulfonic acid groups for hydrophilicity and charge-buffering. The unique structure with such non-covalent interactions facilitates K⁺ for permeation across the shell and binding to the core while also ensuring mechanical strength and anti-swelling durability in biofluids. The microspheres exhibit high selectivity ratios of K⁺ (S_K/Na, S_K/Ca, S_K/Mg up to 9.8, 21.6, and 17.7). As column adsorbents for hemoperfusion simulation, they effectively lower elevated K⁺ levels to the normal range (clearance rates up to 44.4%/45.3% for hyperkalemic human serum/blood). Blood compatibility tests show low protein adsorption, preferable hemocyte compatibility, and anticoagulation property in vitro. This promising strategy has clinical potential for hyperkalemia in high-risk patients. STATEMENT OF SIGNIFICANCE: Hyperkalemia (serum potassium >5 mmol/L) is a common complication in chronic renal failure patients. The limitations of existing treatments prompt a shift to wearable artificial kidney technology for clinical convenience and efficacy. Existing treatments have limitations, and we turn to adsorbent-based miniaturized blood purification devices in the prospect of wearable artificial kidney technology. There exists a lack of ion-specific adsorbents applied in extracorporeal circuits to redress electrolyte imbalances like hyperkalemia. Inspired by cells, we aim at the favorable permeation and enrichment of K⁺ by microspheres. The microspheres have a microphase-isolated core-shell structure, whose nano-spaced groups form cation-affinitive clusters. Selective K⁺ removal and blood compatibility are achieved. We expect this strategy to enlighten alternative hyperkalemia therapy for these high-risk patients.

Highly selective adsorption and lattice process of cesium by cubic cyanide-based functional materials

Cesium (Cs) is a byproduct of nuclear bombs, nuclear weapons testing, and nuclear fission in nuclear reactors. Cs can enter the human body through food or air and cause lasting damage. Highly efficient and selective removal of ¹³⁷Cs from low-level radioactive effluents (LLREs), which contain many radionuclides and dissolved heavy metal species, is imperative for minimizing LLRE volume, and facilitating their final disposal. Prussian blue analogs (PBAs) have received much attention as materials for the removal of radioactive Cs because of their affinity for adsorbing Cs⁺. In this study, an inexpensive and readily available cyanide-based functional material (PBA_Cu) exhibiting high efficiency and excellent selectivity toward Cs capture was designed through a facile low-temperature co-precipitation process. Nano-PBA_Cu, crystallizing in the cubic space group (Fm-3m (225)), has an average pore size of 6.53 nm; consequently, PBA_Cu can offer abundant atomic occupation sites for capturing and incorporating Cs. Here, the pseudo-second-order kinetic model and Langmuir model fitted well with the adsorption of Cs ⁺ on PBA_Cu, with a maximum capture capacity of 95.75 mg/g within 5 min, confirming that PBA_Cu could rapidly capture Cs ions. PBA_Cu strongly and selectively interacted with Cs even in a simulant containing large Na⁺, NH₄⁺, Ca²⁺, and Mg²⁺ ion concentrations in an aqueous solution. The process of Cs ⁺ adsorption by cyanide-based functional crystals was confirmed to involve the entry of Cs⁺ into cyanide-based functional crystals to replace K⁺ and finally achieve the lattice incorporation of Cs. The current results broaden the lattice theory of radionuclide Cs removal and provide a promising alternative for the immobilization of Cs from radioactive wastewater.

Non-thermal plasma irradiated polyaluminum chloride for the heterogeneous adsorption enhancement of Cs+ and Sr2+ in a binary system

The natural ecosystem will continually deteriorate for decades by the leakage of Cs and Sr isotopes. The exploration of the new materials or techniques for the efficient treatment of radioactive wastewater is critically important. In this study, a dielectric barrier discharge (DBD) configuration was constructed to operate the non-thermal plasma (NTP). The NTP was incorporated into the synthesis of polyaluminum chloride (PAC) in two different procedures to intensify the synthesis of PAC (NTP-PAC) and enhance the further removal of Cs and Sr from wastewater. The employment of NTP in two procedures both had significantly changed the physicochemical characteristics of PAC materials, which facilitated the further adsorption application of NTP-PAC on the treatment of Cs⁺ and Sr²⁺. Different molecular, morphological, and adsorption characteristics were confirmed to the NTP-PAC materials. The heterogeneous adsorption of the NTP-PAC can be appropriately fitted by both the pseudo-first-order kinetic model and the Elovich model. Both physisorption and chemisorption reaction mechanisms were ensured for the heterogeneous adsorption of the NTP-PAC material towards Cs⁺ and Sr²⁺, which guaranteed the excellent adsorption performance of NTP-PAC materials compared to PAC. The electron collisions caused by NTP with alum pulp created highly reactive growth precursors and intensified the nucleation and hydrolysis polymerization of PAC. The employment of NTP explicitly broadens the reaction pathways between PAC and cationic contaminants in the aqueous environment, which expands the application area of PAC materials in environmental sustainability.

Enhancing adsorption capacity and structural stability of Li1.6Mn1.6O4 adsorbents by anion/cation co-doping

Modifying the structure of Li_1.6Mn_1.6O₄ (LMO) to enhance its structural stability and adsorption capacity is an effective method to generate materials to recover Li⁺ ions from mixed solution. Herein, the co-doping of trace non-metal ion (S) and metal ion (Al) into Li_1.6Mn_1.6O₄ (LMO-SAl) is established and shows excellent Li⁺ adsorption capacity and Mn anti-dissolution properties. The adsorption capacity (when [Li⁺] is 6 mmol L⁻¹) is increased from 26.1 mg g⁻¹ to 33.7 mg g⁻¹. This is attributed to improved charge density via substitution of S at O sites, which facilitates the adsorption/desorption process. The Mn dissolution is also reduced from 5.4% to 3.0% for LMO-SAl, which may result from the stronger Al–O bonds compared to Li–O bonds that enhance the structural stability of the LMO. The ion-sieving ability of the co-doped material goes by the order of K_d (Li⁺ > Ca²⁺ > Mg²⁺ > Na⁺ > K⁺), indicating that Li⁺ can be efficiently separated from Lagoco Salt Lake brine. These results predict that lithium ions are effectively adsorbed from brine by the co-doped LMO material, which manifests the feasibility of lithium recovery and provides basic data for further industrial applications of adsorption.

Modifying the structure of Li_1.6Mn_1.6O₄ (LMO) to enhance its structural stability and adsorption capacity is an effective method to generate materials to recover Li⁺ ions from mixed solution.

Symmetry-Binding Correlations of Crown Ether Complexes with Li+ and Na. ACS OMEGA 2021;6:19233-19237. [PMID: 34337261 PMCID: PMC8320112 DOI: 10.1021/acsomega.1c02684]

The gas-phase structure of 18-crown-6 in the presence of Li⁺ and Na⁺ cations is highly flexible and generally distorted. Using density functional theory calculations, natural bond orbital analysis, and symmetry measures, we reveal the driving forces behind the structural and energy trends of 18-crown-6 and its phenyl substituents. We show that the structural deviation from C ₃-symmetry increases with the non-bonded interactions between the occupied sp^x orbitals of the crowns' oxygen atoms and the unoccupied 2s orbital of the cation. These orbital interactions are strongly correlated with the overall host-guest interaction energy. Our approach highlights the role of non-bonded interactions and paves the way for deeper understanding of structure-reactivity relations of flexible host-guest systems.

Synthesis, Biological Evaluation, and Molecular Modeling of Aza-Crown Ethers

Synthetic and natural ionophores have been developed to catalyze ion transport and have been shown to exhibit a variety of biological effects. We synthesized 24 aza- and diaza-crown ethers containing adamantyl, adamantylalkyl, aminomethylbenzoyl, and ε-aminocaproyl substituents and analyzed their biological effects in vitro. Ten of the compounds (8, 10–17, and 21) increased intracellular calcium ([Ca²⁺]_i) in human neutrophils, with the most potent being compound 15 (N,N’-bis[2-(1-adamantyl)acetyl]-4,10-diaza-15-crown-5), suggesting that these compounds could alter normal neutrophil [Ca²⁺]_i flux. Indeed, a number of these compounds (i.e., 8, 10–17, and 21) inhibited [Ca²⁺]_i flux in human neutrophils activated by N-formyl peptide (fMLF). Some of these compounds also inhibited chemotactic peptide-induced [Ca²⁺]_i flux in HL60 cells transfected with N-formyl peptide receptor 1 or 2 (FPR1 or FPR2). In addition, several of the active compounds inhibited neutrophil reactive oxygen species production induced by phorbol 12-myristate 13-acetate (PMA) and neutrophil chemotaxis toward fMLF, as both of these processes are highly dependent on regulated [Ca²⁺]_i flux. Quantum chemical calculations were performed on five structure-related diaza-crown ethers and their complexes with Ca²⁺, Na⁺, and K⁺ to obtain a set of molecular electronic properties and to correlate these properties with biological activity. According to density-functional theory (DFT) modeling, Ca²⁺ ions were more effectively bound by these compounds versus Na⁺ and K⁺. The DFT-optimized structures of the ligand-Ca²⁺ complexes and quantitative structure-activity relationship (QSAR) analysis showed that the carbonyl oxygen atoms of the N,N’-diacylated diaza-crown ethers participated in cation binding and could play an important role in Ca²⁺ transfer. Thus, our modeling experiments provide a molecular basis to explain at least part of the ionophore mechanism of biological action of aza-crown ethers.

Prediction and optimization of adsorption properties for Cs+on NiSiO@NiAlFe LDHs hollow spheres from aqueous solution: Kinetics, isotherms, and BBD model

In this work, novel NiSiO@NiAlFe layered double hydroxides (LDHs) hollow spheres were prepared by hydrothermal method. It was worth noting that LDHs' grafting towards NiSiO hollow spheres could avoid the LDHs' aggregation, and thus enhanced the material's adsorption capacity. Furthermore, adsorption kinetics, adsorption isotherms, and Box-Behnken Design (BBD) model were conducted. Results indicated that NiSiO@NiAlFe LDHs hollow spheres had sufficient adsorption capability towards Cs⁺. The adsorption kinetics satisfied the pseudo-second-order adsorption model, Temkin model and Langmuir isotherm model. The adsorption process was efficient at the alkaline condition (pH = 10). The adsorption kinetics indicated that the adsorption process could reach the equilibrium in only 20 min. The maximum adsorption capacity of Cs⁺ towards NiSiO@NiAlFe LDHs hollow spheres was estimated to be 61.5 mg g^-1. Moreover, the adsorption thermodynamics indicated that the adsorption process was exothermal, feasible and spontaneous. Thus, NiSiO@NiAlFe LDHs hollow spheres presented a broad potential for treating cesium containing wastewater.

The adsorption behavior of lithium on spinel titanium oxide nanosheets with exposed (1-14) high-index facets

The ion-exchange process is usually influenced by the surface properties of the adsorbents. In particular, the prophase adsorption/desorption process is confined by different crystal facets. In this research, spinel Li4Ti5O12 nanosheets with an exposed (1-14) high-index facet were prepared by a hydrothermal method followed by calcination treatment. Then, a H4Ti5O12 adsorbent was obtained, covered with the same (1-14) facets, after treatment with 0.2 M HCl. This special facet-exposed H4Ti5O12 has high cycling ability, with the adsorption uptake remaining at 96.84% after four cycles, a fast adsorption equilibrium time (equilibrium time < 60 min), excellent ion adsorption selectivity for Li+ uptake (separation factor: Li+ > K+ > Ca2+ > Na+ > Mg2+), and good adsorption capacity for Li+ uptake (21.57 mg g-1 ). With the help of X-ray photoelectron spectroscopy analyses, the Li+ adsorption process on the H4Ti5O12 nanosheets is shown to be an ion-exchange process. In addition, the coordination relationship between lithium and oxygen ions was investigated, illustrating that the four-coordinated structure is more stable than other complexes. These results indicate that hydrogen ions are exchanged for lithium ions at tetrahedral 8a sites, leading to the H4Ti5O12 structure with high stability in the adsorption-desorption cycling process.

Hydrothermal synthesis and adsorption behavior of H4Ti5O12 nanorods along [100] as lithium ion-sieves

The adsorption method is a promising route to recover Li⁺ from waste lithium batteries and lithium-containing brines. To achieve this goal, it is vital to synthesize a stable and high adsorption capacity adsorbent. In this work, Li₄Ti₅O₁₂ nanorods are prepared by two hydrothermal processes followed by a calcination process. Then the prepared Li₄Ti₅O₁₂ nanorods are treated with different HCl concentrations to obtain a H₄Ti₅O₁₂ adsorbent with 5 μm length along the [100] direction. The maximum amount of extracted lithium can reach 90% and the extracted titanium only 2.5%. The batch adsorption experiments indicate that the H₄Ti₅O₁₂ nanorod maximum adsorption capacity can reach 23.20 mg g⁻¹ in 24 mM LiCl solution. The adsorption isotherms and kinetics fit a Langmuir model and pseudo-second-order model, respectively. Meanwhile, the real adsorption selectivity experiments show that the maximum Li⁺ adsorption capacity reaches 1.99 mmol g⁻¹, which is far higher than Mg²⁺ (0.03 mmol g⁻¹) and Ca²⁺ (0.02 mmol g⁻¹), implying these nanorods have higher adsorption selectivity for Li⁺ from Lagoco Salt Lake brine. The adsorption capacity for Li⁺ remains 91% after five cycles. With the help of XPS analyses, the adsorption mechanism of Li⁺ on the H₄Ti₅O₁₂ nanorods is an ion exchange reaction. Therefore, this nanorod adsorbent has a potential application for Li⁺ recovery from aqueous lithium resources.

H₄Ti₅O₁₂ nanorods were successfully prepared by hydrothermal methods followed by a calcination process. Batch experiments indicate that the nanorod adsorbent is a promising adsorbent to recover lithium from liquid lithium resources.

Combined use of tannic acid-type organic composite adsorbents and ozone for simultaneous removal of various kinds of radionuclides in river water

Tannic acid-type organic composite adsorbents (PA316TAS, AR-01TAS, PYRTAS, WA10TAS, WA20TAS, and WA30TAS), combined with hydrolyzed and sulfonated tannic acid (TAS) and porous-type strongly basic anion-exchange resin (PA316), benzimidazole-type anion-exchange resin embedded in high-porous silica beads (AR-01), pyridine-type anion-exchange resin (PYR), acrylic-type weakly basic anion-exchange resin (WA10), or styrene-type weakly basic anion-exchange resins (WA20 and WA30) for simultaneous removal of various kinds of radionuclides in river water were successfully synthesized. The adsorption behavior of twelve kinds of simulated radionuclides (Mn, Co, Sr, Y, Ru, Rh, Sb, Te, Cs, Ba, Eu, and I (I^- and IO₃^-)) on these composite adsorbents has been studied in real river water at room temperature. PA316TAS adsorbents showed much higher distribution coefficients (K_d) for all metal ions. TAS structure has more selective adsorption ability for Mn, Co, Sr, Y, Cs, Ba, Eu, and IO₃^-. On the other hand, Y, Ru, Rh, Sb, Te, Eu, I (I^- and IO₃^-) were adsorbed on both PA316 and TAS structures. To evaluate the validity of these mechanistic expectations, the respective chemical adsorption behaviors of Mn, Co, Sr, etc. and PA316TAS adsorbent were examined in river water ranging in temperature from 278 to 333 K. As was expected, one adsorption mechanism for Mn, Co, Sr, Cs, and Ba systems and two types of adsorption mechanisms for Y, Ru, Rh, Sb, Te, Eu, I (I^- and IO₃^-) systems were observed. On the other hand, the precipitation of Mn, Co, Y, Ru, Rh, Te, and Eu was formed by ozonation for river water, that is, ozone can transform Mn, Co, Y, Ru, Rh, Te, and Eu ions into the insoluble precipitates. Hence, one straight line for Sr, Cs, Ba systems and two types of straight lines for Sb, I (I^- and IO₃^-) systems were obtained in river water treated with ozone. The chromatography experiments of Cs, Sr, I (I^- and IO₃^-) were carried out to calculate their maximum adsorption capacities. The obtained maximum adsorption capacities of Cs, Sr, and I^- mixed with IO₃^- were 1.7 × 10^-4 (Cs), 1.8 × 10^-3 (Cs/O₃), 7.8 × 10^-5 (Sr), 5.6 × 10^-4 (Sr/O₃), 5.4 × 10^-2 (I^- and IO₃^-), 3.1 × 10^-2 (I^- and IO₃^-/O₃) mol/g - PA316TAS. It was discovered that the maximum adsorption capacities of I^- and IO₃^- for the composite adsorbent is unprecedented high and the capacity become much greater than an order of magnitude, compared with those of previous reports. This phenomenon suggests the formation of electron-donor-acceptor (EDA) complexes or pseudo EDA complex. Based on these results, it was concluded that the combined use of tannic acid-type organic composite adsorbents and ozone made it possible to remove simultaneously and effectively various kinds of radionuclides in river water in the wide pH and temperature ranges.

Superhydrophilic and highly elastic monolithic sponge for efficient solar-driven radioactive wastewater treatment under one sun

As an effective way to obtain solar energy and separate the soluble contaminants from water, solar-driven interfacial evaporation is used in desalination, wastewater treatment, electricity generation, and domestic water heating system. Herein, we demonstrate a monolithic sponge with three-dimensional porous structure as the solar-energy evaporator, which is composed of hydrophilic polymer (Konjac Glucomannan, KGM) and solar absorbent (reduced graphene oxide, rGO). Under one sun irradiation, the sponge achieves a rapid evaporation rate (1.60 kg m^-2 h^-1) and high interfacial water evaporation efficiency (92 %) due to its good absorption, photothermal, thermal insulation, and fast water transport properties. Meanwhile, the concentrations of radioactive elements (strontium, cesium, and uranium) in wastewater dropped from grams to micrograms after purification, even under radiation and acidic conditions. Additionally, the durability and repeatability of the sponge also have been verified. The results showed that solar-driven interfacial evaporation can effectively treat radioactive wastewater and enrich various radionuclides in a more energy-saving manner.

K-gradient doping to stabilize the spinel structure of Li1.6Mn1.6O4 for Li+ recovery

Li⁺ adsorbent doped with K was prepared and the K entered into the Li_1.6Mn_1.6O₄ (LMO) lattice was confirmed by STEM. DFT calculations further confirmed the K substitution for Li at the 16d sites, which enhanced the stability of LMO.