Photocatalytic and photo-fenton activity of iron oxide-doped carbon nitride in 3D printed and LED driven photon concentrator

Controllable synthesis of copper-organic frameworks via ligand adjustment for enhanced photo-Fenton-like catalysis

The efficient heterogeneous photo-Fenton-like catalysts based on two secondary ligand-induced Cu(II) metal-organic frameworks (Cu-MOF-1 and Cu-MOF-2) were constructed for the first time and investigated for the degradation of multiple antibiotics. Herein, two novel Cu-MOFs were prepared using mixed ligands by a facile hydrothermal method. The one-dimensional (1D) nanotube-like structure could be obtained by using V-shaped, long and rigid 4,4'-bis(3-pyridylformamide)diphenylether (3-padpe) ligand in Cu-MOF-1, while polynuclear Cu cluster could be prepared more easily by using short and small isonicotinic acid (HIA) ligand in Cu-MOF-2. Their photocatalytic performances were measured by degradation of multiple antibiotics in Fenton-like system. Comparatively, Cu-MOF-2 exhibited superior photo-Fenton-like performance under visible light irradiation. The outstanding catalytic performance of Cu-MOF-2 was ascribed to the tetranuclear Cu cluster configuration and excellent ability of photoinduced charge transfer and hole separation thus improved the photo-Fenton activity. In addition, Cu-MOF-2 showed high photo-Fenton activity in wide pH working range 3-10 and maintained wonderful stability after five cyclic experiments. The degradation intermediates and pathways were deeply studied. The main active species h⁺, O₂^- and OH worked together in photo-Fenton-like system and possible degradation mechanism was proposed. This study provided a new approach to design the Cu-based MOFs Fenton-like catalysts.

The construction of high efficient visible-light-driven 3D porous g-C3N4/Fe3O4 photocatalyst: A new photo-induced bacterial inactivation material enhanced by cascade photo-Fenton reaction

Photocatalytic disinfection is considered a promising method for eliminating the hazards of pathogenic bacteria. Graphitic carbon nitride (g-C₃N₄) is an ideal photocatalytic bacterial inactivation material for its advantage of tunable band structure, good stability and easy preparation. This work has constructed a novel defective 3D porous g-C₃N₄ by cyanamide carbonation using dendritic mesoporous silica template. The direct loading of Fe₃O₄ nanoparticles provided an excellent pg-C₃N₄-Fe₃O₄ photocatalyst suitable for water disinfection. Compared to pristine g-C₃N₄, the prepared 3D porous defective g-C₃N₄-Fe₃O₄ exhibited the enhanced visible light absorbance as indicated by the band gap decreasing of 0.66 eV, and about 3 and 10 fold increase of photo-induced current response and O₂ adsorption respectively. The pg-C₃N₄-Fe₃O₄ showed excellent visible-light-driven photocatalytic bactericidal activity. It could kill 1 × 10⁷ cfu mL^-1Escherichia coli completely within 1 h under visible-light illumination (100 mW cm^-2) with good reusability, its logarithmic bacterial inactivation efficiency was about 2.5 fold higher than pg-C₃N₄. The enhanced bactericidal performance is mainly ascribed to the Fe₃O₄ involved cascade photo-Fenton reaction.

Investigation of pure and g-C3N4 loaded CdWO4 photocatalytic activity on reducing toxic pollutants

A facile synthesis of pristine and g-C₃N₄ loaded CdWO₄ (Cadmium Tungstate) were reported and analyzed the effect of pollutants removal in wastewater. The samples were characterized and the morphology of the pristine sample showed the nanostructures with high cluster of layer formed. While adding PEG (Polyethylene glycol), the surface has exhibited less agglomeration and in g-C₃N₄ added sample the agglomeration was intensely reduced and nanostructures have been clearly found. Photocatalytic performance on cationic dye was investigated under visible light. The efficiency calculated for g-C₃N₄- CdWO₄ sample was 85% for MB. The C/C₀ plot gives better degradation. The kinetic study revealed pseudo first order reaction. The g-C₃N₄-CdWO₄ sample exhibited higher "k" value which proved best efficiency on removing the pollutant. g-C₃N₄-CdWO₄ sample will make better reduction on toxic pollutants and be a good candidate in futuristic applications. By carbon based derivates inclusion with photo active materials, the morphology and surface area was greatly improved and it enhances activity of host material and it will be the promising material for industrial applications.

Fe/N-doped carbon magnetic nanocubes toward highly efficient selective decolorization of organic dyes under ultrasonic irradiation

Fe/N-doped carbon magnetic nanocubes (Fe/N-C MNCs) were feasibly fabricated through in situ thermal transformations of Prussian blue nanocubes (PB NCs) in an inert atmosphere, and the resultant composite employed as the heterogeneous noble-metal-free catalyst possessed satisfactory catalytic performance in hydrogen peroxide activation. By examining the properties of Fe/N-C MNCs, we demonstrate for the first time that the catalyst could act in synergy with ultrasonic irradiation and accelerate the selectivity of the degradation reaction of dyes. The degradation efficiency of the organic positively charged dye (methylene blue) is significantly increased after ultrasonic irradiation addition, probably owing to charge matching between a positively charged dye and the Fe/N-C MNCs. Interestingly, organic pollution degradation mainly follows a non-radical pathway. Furthermore, singlet oxygen (¹O₂) is predominantly produced by Fe/N-C MNCs on H₂O₂ activation, and it is the contributor to catalytic degradation instead of hydroxyl and/or superoxide anion radicals. Moreover, the Fe/N-C MNCs exhibit excellent stability and reusability. These findings offer interesting insights into the potential application of functional noble-metal-free materials in catalysis and wastewater remediation under ultrasonic radiation.

Graphitic carbon nitride nanosheets via acid pretreatments for promoted photocatalysis toward degradation of organic pollutants

Acid treatment serves as an effective engineering strategy to modify the structure of graphitic carbon nitride (g-C₃N₄) for enhanced metal-free photocatalysis, while their lacks a comprehensive understanding about the impacts of different acid species and acid treatment approaches on the intrinsic structure and properties of g-C₃N₄ and structure-activity relationships are ambiguous. Employing inorganic/organic acids including hydrochloric acid (HCl), nitric acid (HNO₃), acetic acid (HAc), sulphuric acid (H₂SO₄), or oxalic acid (H₂C₂O₄) as treatment acids, herein, we compare the impacts of different acid pretreatment approaches on the structure and properties of g-C₃N₄. Due to different acid-melamine interaction modes and the activation roles of various acids, the obtained g-C₃N₄ samples exhibit varied structures, physiochemical properties and photocatalytic activities. Compared with bulk graphitic carbon nitride (BCN), g-C₃N₄ prepared by acid pretreatment show enhanced photocatalytic performance on bisphenol A (BPA) degradation. The photocatalytic degradation rates of BPA by g-C₃N₄ prepared by HNO₃, HAc, H₂SO₄, H₂C₂O₄, or HCl pretreatment are about 2.2, 2.7, 2.8, 3.2 and 3.8 folds faster than that by BCN. HCl pretreatment proves to be the optimal approach, with the derived g-C₃N₄ (HTCN) showing more intact heptazine structural units, and increased specific surface area, which promote the exposure of more active sites, accelerate charge transfer, and give rise to a notable improvement in photocatalysis, eventually. Mechanistic investigations through quenching experiments and electron paramagnetic resonance (EPR) characterization unveil that superoxide ion radical (O₂^-) and photo-induced holes (h⁺) worked principally in the photodegradation reaction. This work provides new insights for the rational selection of acid types and treatment methods to synthesize metal-free carbon nitrides with improved activity for photocatalytic applications.

Improving Formaldehyde Removal from Water and Wastewater by Fenton, Photo-Fenton and Ozonation/Fenton Processes through Optimization and Modeling

This study aimed to assess, optimize and model the efficiencies of Fenton, photo-Fenton and ozonation/Fenton processes in formaldehyde elimination from water and wastewater using the response surface methodology (RSM) and artificial neural network (ANN). A sensitivity analysis was used to determine the importance of the independent variables. The influences of different variables, including H2O2 concentration, initial formaldehyde concentration, Fe dosage, pH, contact time, UV and ozonation, on formaldehyde removal efficiency were studied. The optimized Fenton process demonstrated 75% formaldehyde removal from water. The best performance with 80% formaldehyde removal from wastewater was achieved using the combined ozonation/Fenton process. The developed ANN model demonstrated better adequacy and goodness of fit with a R2 of 0.9454 than the RSM model with a R2 of 0. 9186. The sensitivity analysis showed pH as the most important factor (31%) affecting the Fenton process, followed by the H2O2 concentration (23%), Fe dosage (21%), contact time (14%) and formaldehyde concentration (12%). The findings demonstrated that these treatment processes and models are important tools for formaldehyde elimination from wastewater.

High-efficiency removal of tetracycline by carbon-bridge-doped g-C3N4/Fe3O4 magnetic heterogeneous catalyst through photo-Fenton process

Carbon-bridge-modified malonamide (MLD)/g-C₃N₄ (CN) was prepared by copolymerization of MLD with urea and melamine and loaded with Fe₃O₄ for the high-efficiency removal of tetracycline (TC) in water under photo-Fenton. The prepared catalysts were characterized by SEM, TEM, N₂ adsorption-desorption analysis, XPS, XRD, and FTIR, which proved that the modification method successfully introduced the C bridge into the carbon nitride molecular system and increased the structural defects of the catalyst. The Carbon-bridge-modified MLD/CN/Fe₃O₄ also had good visible-light response and charge-separation and transport abilities in the photoelectrochemical test. Degradation results showed that the photo-Fenton degradation of TC reached 95.8%, and the mineralization rate was 55.7% within 80 min at 80 mM H₂O₂ dosage, 0.5 g/L catalyst dosage, and near-neutral pH by 0.8MLD/CN/Fe₃O₄. Moreover, the oxidation products and mineralization pathways of TC were explored by LC-MS. Toxicity analysis indicated low environmental threat of the intermediates in TC mineralization. EPR analysis and H₂O₂ decomposition efficiency analyses showed an improvement in the H₂O₂ decomposition performance of 0.8MLD/CN/Fe₃O₄. This work could provide a valuable insight for the application of heterogeneous photo-Fenton technology in wastewater treatment.

Manufacturing and Application of 3D Printed Photo Fenton Reactors for Wastewater Treatment

Additive manufacturing (AM) or 3D printing offers a new paradigm for designing and developing chemical reactors, in particular, prototypes. The use of 3D printers has been increasing, their performance has been improving, and their price has been reducing. While the general trend is clear, particular applications need to be assessed for their practicality. This study develops and follows a systematic approach to the prototyping of Advanced Oxidation Processes (AOP) reactors. Specifically, this work evaluates and discusses different printable materials in terms of mechanical and chemical resistance to photo-Fenton reactants. Metallic and ceramic materials are shown to be impracticable due to their high printing cost. Polymeric and composite materials are sieved according to criteria such as biodegradability, chemical, thermal, and mechanical resistance. Finally, 3D-printed prototypes are produced and tested in terms of leakage and resistance to the photo-Fenton reacting environment. Polylactic acid (PLA) and wood-PLA composite (Timberfill^®) were selected, and lab-scale raceway pond reactors (RPR) were printed accordingly. They were next exposed to H2O2/Fe(II) solutions at pH = 3 ± 0.2 and UV radiation. After 48 h reaction tests, results revealed that the Timberfill^® reactor produced higher Total Organic Carbon (TOC) concentrations (9.6 mg·L^-1) than that obtained for the PLA reactor (5.5 mg·L^-1) and Pyrex^® reactor (5.2 mg·L^-1), which suggests the interference of Timberfill^® with the reaction. The work also considers and discusses further chemical and mechanical criteria that also favor PLA for 3D-printing Fenton and photo-Fenton reactors. Finally, the work also provides a detailed explanation of the printing parameters used and guidelines for preparing prototypes.

Reusable Fe3O4/SBA15 Nanocomposite as an Efficient Photo-Fenton Catalyst for the Removal of Sulfamethoxazole and Orange II

Today, the presence of recalcitrant pollutants in wastewater, such as pharmaceuticals or other organic compounds, is one of the main obstacles to the widespread implementation of water reuse. In this context, the development of innovative processes for their removal becomes necessary to guarantee effluent quality. This work presents the potentiality of magnetic nanoparticles immobilized on SBA-15 mesoporous silica as Fenton and photo-Fenton catalysts under visible light irradiation. The influence of the characteristics of the compounds and nanoparticles on the removal yield was investigated. Once the key aspects of the reaction mechanism were analyzed, to evaluate the feasibility of this process, an azo dye (Orange II) and an antibiotic (sulfamethoxazole) were selected as main target compounds. The concentration of Orange II decreased below the detection limit after two hours of reaction, with mineralization values of 60%. In addition, repeated sequential experiments revealed the recoverability and stability of the nanoparticles in a small-scale reactor. The benchmarking of the obtained results showed a significant improvement of the process using visible light in terms of kinetic performance, comparing the results to the Fenton process conducted at dark. Reusability, yield and easy separation of the catalyst are its main advantages for the industrial application of this process.

Enhanced removal of basic dye using carbon nitride/graphene oxide nanocomposites as adsorbents: high performance, recycling, and mechanism

The presence of dyes in wastewater streams poses a great challenge for sustainability and brings the need to develop technologies to treat effluent streams. Here, we propose a mixture of high superficial area carbon-based nanomaterial strategy to improve the removal of basic blue 26 (BB26) by blending porous carbon nitride (CN) and graphene oxide (GO). We prepared CN and GO pristine materials, as well the nanocomposites with mass/ratio 30/70, 50/50, and 70/30, and applied them into BB26 uptake. Nanocomposite 50/50 CN/GO was found to be the better adsorbent, and the optimization of the adsorption revealed a fast equilibrium time of 30 min, after sonication for 2 min, nanocomposite 50/50, and BB26 dye loading of 0.1 g/L and 100 mg/L, respectively. The pH variation had great influence on BB26 uptake, and at ultrapure water pH, the dye removal capacity by the composite reached 917.78 mg/g. At pH 2, a remarkable removal efficiency of 3510.10 mg/g was obtained, probably due to electrostatic interactions among protonated amine groups of the dye and negatively charged CN/GO nanocomposite. The results obtained were best fitted to the pseudo-second-order kinetic model and the Dubinin-Radushkevich isotherm. The adsorption process was thermodynamically spontaneous, and physisorption was the main mechanism, which is based on weak electrostatic and π-π interactions. The dye attached to the CN/GO nanocomposite could be removed by washing with ethyl alcohol, and the adsorbent was reused for five consecutive cycles with high BB26 uptake efficiency. The CN/GO nanocomposite ability to remove the BB26 dye was 21 times higher than those reported in the literature, indicating CN/GO composites as potential filtering materials to basic dyes.

A photoelectrochemical aptasensor for the determination of bisphenol A based on the Cu (I) modified graphitic carbon nitride

Bisphenol A (BPA) has been penetrating every corner of our daily life via the entities of children's toys, food containers and electronic equipment. The ubiquitous exposure of BPA urges the implementation of supervising its emission in environment. This work designs a method of photoelectrochemical (PEC) aptasensing for the determination of BPA based on the Cu(I) modified carbon nitride (Cu/g-C₃N₄). The Cu/g-C₃N₄ was prepared by solvothermal reaction with the ionic liquid bis(1-hexadecyl-3-methylimidazolium) tetrachlorocuprate (II) as Cu source. Cu/g-C₃N₄ displays excellent PEC performances due to the introduction of Cu(I). The visible light absorption capacity and conductivity of g-C₃N₄ can be enhanced by introducing Cu(I). With the help of BPA-binding aptamer immobilized on the surface of Cu/g-C₃N₄, the Cu/g-C₃N₄ PEC aptasensor has adopted for the determination of BPA. The PEC aptasensor exhibits a well-fitted linear correlation between the response photocurrent signal and the logarithm of the concentration of BPA. The PEC aptasensor shows a distinguished capability of BPA detection with a wide detection range of 5.00 × 10^-11 to 5.00 × 10^-5 g L^-1 and low detection limit of 1.60 × 10^-11 g L^-1 (at S/N = 3). This work provides a profound insight for detecting BPA in environmental water.

Surface oxygen vacancies enriched FeOOH/Bi2MoO6 photocatalysis- fenton synergy degradation of organic pollutants

To achieve rapid separation of photogenerated charges, increase photocatalytic degradation activity, a visible light-driven FeOOH/Bi₂MoO₆-OVs photocatalyst was designed and successfully fabricated via solvothermal synthesis and calcination. H₂O₂ was added under visible light irradiation to form a heterogeneous photocatalysis-Fenton synergy system. Using visible light irradiation, 10% FeOOH/Bi₂MoO₆-OVs had the best degradation activity. The removal efficiency of phenol was 100% within 3 h, which was 1.54 times and 1.33 times of the degradation efficiency of photocatalysis and Fenton alone, respectively. The catalyst has high removal activity for various pollutants and good cycle stability. Hydroxyl radicals and superoxide radicals have proven to be the main active substances and a reasonable catalytic mechanism was proposed. Surface oxygen vacancy can not only reduce the width of band gap, promote the separation and migration of photogenerated electron-hole pairs, but also make the OO bond of H₂O₂ elongate and weaken, making it easier to react with FeOOH and realize the synergistic effect of photocatalysis-Fenton. Simultaneously, the oxygen vacancies located near the valence band can capture holes, and the holes are rapidly transferred to the surface of the catalyst and participated in the degradation of pollutants.

Recent Strategies for Hydrogen Peroxide Production by Metal-Free Carbon Nitride Photocatalysts

Hydrogen peroxide (H2O2) is a chemical which has gained wide importance in several industrial and research fields. Its mass production is mostly performed by the anthraquinone (AQ) oxidation reaction, leading to high energy consumption and significant generation of wastes. Other methods of synthesis found in the literature include the direct synthesis from oxygen and hydrogen. However, this H2O2 production process is prone to explosion hazard or undesirable by‑product generation. With the growing demand of H2O2, the development of cleaner and economically viable processes has been under intense investigation. Heterogeneous photocatalysis for H2O2 production has appeared as a promising alternative since it requires only an optical semiconductor, water, oxygen, and ideally solar light irradiation. Moreover, employing a metal-free semiconductor minimizes possible toxicity consequences and reinforces the sustainability of the process. The most studied metal‑free catalyst employed for H2O2 production is polymeric carbon nitride (CN). Several chemical and physical modifications over CN have been investigated together with the assessment of different sacrificial agents and light sources. This review shows the recent developments on CN materials design for enhancing the synthesis of H2O2, along with the proposed mechanisms of H2O2 production. Finally, the direct in situ generation of H2O2, when dealing with the photocatalytic synthesis of added-value organic compounds and water treatment, is discussed.