Facilely synthesized cobalt doped hydroxyapatite as hydroxyl promoted peroxymonosulfate activator for degradation of Rhodamine B

Iron (hydr)oxides-induced activation of sulfite for contaminants degradation: The critical role of structural Fe(III)

Iron-based sulfite (S(IV)) activation has emerged as a novel strategy to generate sulfate radicals (SO4•-) for contaminants degradation. However, numerous studies focused on dissolved iron-induced homogeneous activation processes while the potential of structural Fe(III) remains unclear. In this study, five iron (hydr)oxide soil minerals (FeOx) including ferrihydrite, schwertmannite, lepidocrocite, goethite and hematite, were successfully employed as sources of structural Fe(III) for S(IV) activation. Results showed that the catalytical ability of structural Fe(III) primarily depended on the crystallinity of FeOx instead of their specific surface area and particle size, with ferrihydrite and schwertmannite being the most active. Furthermore, in-situ ATR-FTIR spectroscopy and 2D-COS analysis revealed that HSO3- was initially adsorbed on FeO6 octahedrons of FeOx via monodentate inner-sphere complexation, ultimately oxidized into SO42- which was then re-adsorbed via outer-sphere complexation. During this process, strong oxidizing SO4•- and •OH were formed for pollutants degradation, confirmed by radical quenching experiments and electron spin resonance. Moreover, FeOx/S(IV) system exhibited superior applicability with respect to recycling test, real waters and twenty-six pollutants degradation. Eventually, plausible degradation pathways of three typical pollutants were proposed. This study highlights the feasibility of structural Fe(III)-containing soil minerals for S(IV) activation in wastewater treatment.

FeCo@hydrochar nanocomposites as efficient peroxymonosulfate activator for organic pollutant degradation

Sulfate radical-based advanced oxidation processes (SR-AOPs) are renowned for their exceptional capacity to degrade refractory organic pollutants due to their wide applicability, cost-effectiveness, and swift mineralization and oxidation rates. The primary sources of radicals in AOPs are persulfate (PS) and peroxymonosulfate (PMS) ions, sparking significant interest in their mechanistic and catalytic aspects. To develop a novel nanocatalyst for SR-AOPs, particularly for PMS activation, we synthesized carbon-coated FeCo nanoparticles (NPs) using solvothermal methods based on the polyol approach. Various synthesis conditions were investigated, and the NPs were thoroughly characterized regarding their structure, morphology, magnetic properties, and catalytic efficiency. The FeCo phase was primarily obtained at [OH-] / [Metal] = 26 and [Fe] / [Co] = 2 ratios. Moreover, as the [Fe]/[Co] ratio increased, the degree of xylose carbonization to form a carbon coating (hydrochar) on the NPs also increased. The NPs exhibited a spherical morphology with agglomerates of varying sizes. Vibrating-sample magnetometer analysis (VSM) indicated that a higher proportion of iron resulted in NPs with higher saturation magnetization (up to 167.8 emu g-1), attributed to a larger proportion of FeCo bcc phase in the nanocomposite. The best catalytic conditions for degrading 100 ppm Rhodamine B (RhB) included 0.05 g L-1 of NPs, 2 mM PMS, pH 7.0, and a 20-min reaction at 25 °C. Notably, singlet oxygen was the predominant specie formed in the experiments in the SR-AOP, followed by sulfate and hydroxyl radicals. The catalyst could be reused for up to five cycles, retaining over 98% RhB degradation, albeit with increased metal leaching. Even in the first use, dissolved Fe and Co concentrations were 0.8 ± 0.3 and 4.0 ± 0.5 mg L-1, respectively. The FeCo catalyst proved to be effective in dye degradation and offers the potential for further refinement to minimize Co2+ leaching.

The CoO-doped carbon nanotubes enhance electronic performance and effectively activate persulfate for the degradation of sulfafurazole

In recent studies, carbon nanotube (CNTs) materials and their composites have demonstrated remarkable catalytic activity in the activation of persulfate (PS), facilitating the efficient degradation of organic pollutants. In this study, a novel Co loaded carbon nanotubes (CoO@CNT) catalyst was prepared to promote PDS activation for the degradation of sulfafurazole (SIZ). Experimental results, the CNT as a carrier effectively reduces the leaching of cobalt ions and improves the electron transport capacity，whereas the introduced Co effectively activates the PDS, promoting the generation of highly reactive radicals to degrade SIZ. Under optimized conditions (a catalyst dose of 0.2 g/L, a PDS dose of 1 g/L and an initial pH = 9.0), the obtained CoO@CNT demonstrated favorable Fenton-like performance, reaching a degradation efficiency of 95.55% within 30 min. Furthermore, density functional theory (DFT) calculations demonstrate that the introduction of cobalt (Co) accelerates electron transfer, promoting the decomposition of PDS while facilitating the Co2+/Co3+ redox cycling. We further employed the environmental chemistry and risk assessment system (ECOSAR) to evaluate the ecological toxicity of intermediate products, revealing a significant reduction in ecological toxicity associated with this degradation process, thereby confirming its environmental harmlessness. Through batch experiments and studies, we gained a comprehensive understanding of the mechanism and influencing factors of CoO@CNT in the role of SIZ degradation, and provided robust support for evaluating the ecological toxicity of degradation products. This study provides a significant strategy for the development of efficient catalysts incorporating Co for the environmentally friendly degradation of organic pollutants.

Recent Advances in and Challenges with Fe-Based Metallic Glasses for Catalytic Efficiency: Environment and Energy Fields

Metallic glass is being gradually recognized for its unique disordered atomic configuration and excellent catalytic activity, so is of great significance in the field of catalysis. Recent reports have demonstrated that Fe-based metallic glass, as a competitive new catalyst, has good catalytic activity for the fields of environment and energy, including high catalytic efficiency and stability. This review introduces the latest developments in metallic glasses with various atomic components and their excellent catalytic properties as catalysts. In this article, the influence of Fe-based metallic glass catalysts on the catalytic activity of dye wastewater treatment and water-splitting is discussed. The catalytic performance in different atomic composition systems and different water environment systems, and the preparation parameters to improve the surface activity of catalysts, are reviewed. This review also describes several prospects in the future development and practical application of Fe-based metallic glass catalysts and provides a new reference for the synthesis of novel catalysts.

Sonophotocatalytic removal of organic dyes in real water environments using reusable BiSI@PVDF-HFP nanocomposite membranes

Focusing on the uncontrolled discharge of organic dyes, a known threat to human health and aquatic ecosystems, this work employs a dual-functional catalyst approach, by immobilizing a synthesized bismuth sulfur iodide (BiSI) into a poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) polymeric matrix for multifunctional water remediation. The resulting BiSI@PVDF nanocomposite membrane (NCM), with 20 wt% filler content, maintains a highly porous structure without compromising morphology or thermal properties. Demonstrating efficiency in natural pH conditions, the NCM removes nearly all Rhodamine B (RhB) within 1 h, using a combined sonophotocatalytic process. Langmuir and pseudo-second-order models describe the remediation process, achieving a maximum removal capacity (Qmax) of 72.2 mg/g. In addition, the combined sonophotocatalysis achieved a degradation rate ten and five times higher (0.026 min-1) than photocatalysis (0.002 min-1) and sonocatalysis (0.010 min-1). Furthermore, the NCM exhibits notable reusability over five cycles without efficiency losses and efficiencies always higher than 90%, highlighting its potential for real water matrices. The study underscores the suitability of BiSI@PVDF as a dual-functional catalyst for organic dye degradation, showcasing synergistic adsorption, photocatalysis, and sonocatalysis for water remediation.

LaCoO3/SBA-15 as a high surface area catalyst to activate peroxymonosulfate for degrading atrazine in water

An efficient perovskite-based heterogeneous catalyst is highly desired to activate peroxymonosulfate (PMS) for removing organic pollutants in water. A high surface area PMS-activator was fabricated by loading LaCoO3 on SBA-15 to degrade atrazine (ATR) in water. The LaCoO3/SBA-15 depicted better textural properties and higher catalytic activity than LaCoO3. In 6.0 min, atrazine (ATZ) degradation in the selected LaCoO3/SBA-15/PMS system, LaCoO3, adsorption by LaCoO3/SBA-15, sole PMS processes reached approximately 100%, 55.15%, 12.80%, and 16.65 % respectively. Furthermore, 0.04 mg L-1 Co was leached from LaCoO3/SBA-15 during PMS activation by LaCoO3/SBA-15. The LaCoO3/SBA-15 showed stable catalytic activity after reuse. The use of radical scavengers and electron paramagnetic resonance spectroscopy (EPR) demonstrated that ROS such as 1O2, O2•-, •OH, and SO4•- were generated by PMS activated by LaCoO3/SBA-15 owing to redox reactions [Co2+/Co3+, and O2-/O2]. EPR, XPS, ATR-FTIR, EIS, LSV, and chronoamperometric measurements were used to explain the catalytic mechanism for PMS activation. Excellent atrazine degradation was due to high surface area, porous nature, diffusion-friendly structure, and ROS. Our investigation proposes that perovskites with different A and B metals and modified perovskites can be loaded on high surface area materials to activate PMS into ROS.

Mechanism of peroxymonosulfate activation by nanoparticle Co@N-C: Experimental investigation and theoretical calculation

The release of organic dyes, such as Rhodamine B (RhB), into industrial wastewater has led to significant issues with color pollution in aquatic environments. Herein, we prepared a cobalt nanoparticles (NPs)-based catalyst with the nitrogen-doped carbon-support (Co@N-C) for effective PMS activation. The Co@N-C/PMS system demonstrated the excellent catalytic activity of Co@N-C for activating PMS, achieving nearly 100% degradation of RhB. Singlet oxygen (1O2) and sulfate radicals (SO4•-) were dominant reactive oxygen species for RhB degradation. Density functional theory (DFT) calculations substantiated that the production of 1O2 commenced with the initial generation of *OH through hydrogen abstraction from PMS, culminating in the direct release of oxygen to form 1O2 (PMS→*OH→O*→1O2). The generation of SO4•- was attributed to electron transfer to PMS from the surface of Co NPs (Co0→Co2+→Co3+) and the C-N shell (Co2+→Co3+). The research findings provided new insights into the development of Co-based heterogeneous catalysis for advanced oxidation of refractory organic pollutants in wastewater treatment.

Transition-state defect structure: A new strategy for TiO2-based porous materials to enhance photodegradation of pollutants

The aim of this paper is to investigate the derived structure and properties of Zeolitic Imidazolate Framework-8 (ZIF-8), and the effect of residual structural on the catalytic properties after loading with Titanium Dioxide (TiO2). For this purpose, we ingeniously prepare C-ZIF-8@TiO2 with a transition-state defect structure and apply it for efficiently degrading organic dye wastewater represented by Rhodamine B (Rh-B). Thanks to the transition-state defect structure loaded with TiO2 and ZIF-8 self-derived Carbon (C) and Zinc Oxide (ZnO), the catalytic performance of C-ZIF-8@TiO2 is superior to that of TiO2 and normal TiO2/ZIF-8 composites, and it is effective in degrading a variety of antibiotics and dyes. The related characterization also shows good photovoltaic properties and long-term durability for C-ZIF-8@TiO2. The mechanism on free radical action is elucidated and the possible degradation pathway for Rh-B is speculated. Therefore, C-ZIF-8@TiO2 provides a new strategy for the degradation of organic pollutants in water bodies.

Effective activation of peroxymonosulfate by CoCr-LDH for removing organic contaminants in water: from lab-scale to practical applications

In this study, CoCr layered double hydroxide material (CoCr-LDH) was prepared and used as an effective catalyst for peroxymonosulfate (PMS) activation to degrade organics in water. The prepared CoCr-LDH material had a crystalline structure and relatively porous structure, as determined by various surface analyses. In Rhodamine B (RhB) removal, the most outstanding PMS activation ability belongs to the material with a Co:Cr molar ratio of 2:1. The removal of RhB follows pseudo-first-order kinetics (R2 > 0.99) with an activation energy of 38.23 kJ/mol and efficiency of 98% after 7 min of treatment, and the total organic carbon of the solution reduced 47.2% after 10 min. The activation and oxidation mechanisms were proposed and the RhB degradation pathways were suggested with the key contribution of O2•- and 1O2. Notably, CoCr-LDH can activate PMS over a wide pH range of 4 - 9, and apply to a wide range of organic pollutants and aqueous environments. The material has high stability and good recovery, which can be reused for 5 cycles with a stable efficiency of above 88%, suggesting a high potential for practical recalcitrant water treatment via PMS activation by heterogeneous catalysts.

High efficiency adsorption of uranium by magnesia-silica-fluoride co-doped hydroxyapatite

Hydroxyapatite has a high affinity to uranium, and element doping can effectively improve its adsorption performance. In this study, magnesia-silica-fluoride co-doped hydroxyapatite composite was prepared by hydrothermal method, and the effect of single-phase and multiphase doping on the structure and properties of the composites was investigated. The results showed that the specific surface area of Mg-Si-F-nHA composites increased by 63.01% after doping. Comparing with nHA, U(VI) adsorption capacity of Si-nHA, Mg-Si-nHA and Mg-Si-F-nHA composites increased by 13.01%, 17.39% and 22.03%, respectively. The adsorption capacity of Mg-Si-F-nHA composite reached 1286.76 mg/g. Adsorbent dosage and pH obviously affected U(VI) adsorption, and the experimental data can be fitted well by PSO and Sips models. The physicochemical characterization before and after adsorption suggested that complexation, ion exchange and precipitation participated in uranium adsorption. In conclusion, different elements doping can effectively improve the uranium adsorption properties of hydroxyapatite composites.

Enhancing dye degradation using a novel cobalt metal-organic framework as a peroxymonosulfate activator

Among transition metals, cobalt ions exhibit superior catalytic activity in the peroxymonosulfate (PMS) degradation of pollutants. However, practical application is hindered by their high rate of ion leaching and the propensity for particle reunion issues. In this study, a novel cobalt metal-organic framework catalyst, denoted as CUST-565 ([Co3(BTB)2(BIPY)2]·4.5H2O·DMA), was synthesized via a one-step solvothermal method. The obtained crystal was employed as a catalyst to activate PMS for degrading two pollutants, methyl orange (MO) and rhodamine B (RhB), in wastewater. The catalyst demonstrated efficacy in PMS, achieving 97% degradation of MO and 98% degradation of RhB within 30 min at an initial concentration of 20.0 mg L-1. Additionally, various factors affecting dye degradation, including PMS dosage, catalyst dosage, temperature, initial pH, and coexisting anions, were investigated. Radical quenching experiments confirmed the presence of sulfate radicals (SO4˙-), hydroxyl radicals (HO˙), superoxide radicals (O2˙-), and singlet oxygen (1O2) in the system. After four cycles, CUST-565 retained its ability to catalytically degrade approximately 80% of the pollutants. These observed stability and reusability properties, corroborated by a series of characterization analyses before and after use, suggest that CUST-565 exhibits reliable performance. This work contributes to the development of cobalt-PMS catalysts for efficiently degrading dyes in wastewater.

Boosted micropollutant removal over urchin-like structured hydroxyapatite-incorporated nickel magnetite catalyst via peroxydisulfate activation

In this work, urchin-like structured hydroxyapatite-incorporated nickel magnetite (NiFe3O4/UHdA) microspheres were developed for the efficient removal of micropollutants (MPs) via peroxydisulfate (PDS) activation. The prepared NiFe3O4/UHdA degraded 99.0 % of sulfamethoxazole (SMX) after 15 min in 2 mM PDS, having a first-order kinetic rate constant of 0.210 min-1. In addition, NiFe3O4/UHdA outperformed its counterparts, i.e., Fe3O4/UHdA and Ni/UHdA, by giving rise to corresponding 3.6-fold and 8.6-fold enhancements in the SMX removal rate. The outstanding catalytic performance can be ascribed to (1) the urchin-like mesoporous structure with a large specific surface area and (2) the remarkable synergistic effect caused by the redox cycle of Ni3+/Ni2+ and Fe2+/Fe3+ that enhances multipath electron transfers on the surface of NiFe3O4/UHdA to produce more reactive oxygen species. Moreover, the effects of several reaction parameters, in this case the initial solution pH, PDS dosage, SMX concentration, catalyst loading, co-existing MPs and humic acid level on the catalytic performance of the NiFe3O4/UHdA + PDS system were systematically investigated and discussed in detail. The plausible catalytic mechanisms in the NiFe3O4/UHdA + PDS system were revealed via scavenging experiments and electron paramagnetic resonance analysis, which indicated a radical (•OH and SO4•-) as the major pathway and a nonradical (1O2) as the minor pathway for SMX degradation. Furthermore, NiFe3O4/UHdA exhibited fantastic magnetically separation and retained good catalytic activity with a low leached ion concentration during the performance of four cycles. Overall, the prepared NiFe3O4/UHdA with outstanding PDS activation could be a promising choice for the degradation of persistent organic pollutants from wastewater.

Deep Oxidation of Chlorinated VOCs by Efficient Catalytic Peroxide Activation over Nanoconfined Co@NCNT Catalysts

The catalytic removal of chlorinated VOCs (CVOCs) in gas-solid reactions usually suffers from chlorine-containing byproduct formation and catalyst deactivation. AOP wet scrubber has recently attracted ever-increasing interest in VOC treatment due to its advantages of high efficiency and no gaseous byproduct emission. Herein, the low-valence Co nanoparticles (NPs) confined in a N-doped carbon nanotube (Co@NCNT) were studied to activate peroxymonosulfate (PMS) for efficient CVOC removal in a wet scrubber. Co@NCNT exhibited unprecedented catalytic activity, recyclability, and low Co ion leakage (0.19 mg L-1) for chlorobenzene degradation in a very wide pH range (3-11). The chlorobenzene removal efficiency was kept stable above 90% over Co@NCNT, much higher than that of nonconfined Co@NCNS (45%). The low-valence Co NPs achieved a continuous electron redox cycling (Co0/Co2+ → Co3+ → Co0/Co2+) and greatly promoted the O-O bond dissociation of PMS with the least energy (0.83 eV) inside the channel of Co@NCNT to form abundant HO• and SO4•-. Thus, the deep oxidation of chlorobenzene was achieved without any biphenyl byproducts from the coupling reaction. This study provided a new avenue for designing novel nanoconfined catalysts with outstanding activity, paving the way for the deep oxidation of CVOC waste gas via AOP wet scrubber.

Amorphous titanium dioxide with abundant defects induced by incorporation of silicon dioxide: A potential non-radical activator of hydrogen peroxide

Catalysts based on titanium dioxide (TiO2) have demonstrated a significant potential for oxidizing intractable organic pollutants in heterogenous Fenton-like reactions, even in the absence of light irradiation. In this study, defective amorphous TiO2 enriched Ti3+ and oxygen vacancies (Ov) was synthesized by incorporation of silicon dioxide (SiO2) via a simple sol-gel method. Based on a systematic exploration, an optimal amount of SiO2 was found to be crucial in promoting the formation of Ov and Ti3+, which was achieved by maximizing the non-hexacoordinate structure (Ti4/5/7c) in amorphous TiO2. Furthermore, an unusual singlet oxygen (1O2) based non-radical mechanism was confirmed. It was proposed that the hydroxyl radicals (•OH) produced by Ti3+ active sites during hydrogen peroxide (H2O2) activation may adsorb on the TiO2 surface for extended periods, owing to their favorable interactions with the surface Ov and hydroxyl groups (-OH), thus facilitating their transformation to 1O2. Moreover, the optimized catalyst exhibited favorably catalytic performance across a broad pH range (3-11), making it a promising candidate for applications in rigorous environmental conditions.

Strong coupling of super-hydrophilic and vacancy-rich g-C3N4 and LDH heterostructure for wastewater purification: Adsorption-driven oxidation

Adsorption and wettability are crucial components of catalytic oxidation. To increase the reactive oxygen species (ROS) generation/utilization efficiency of peroxymonosulfate (PMS) activators, defect engineering and 2D nanosheet characteristics were used to regulate electronic structures and expose more active sites. Two-dimensional (2D) super-hydrophilic heterostructure by connecting cobalt species modified nitrogen vacancy-rich g-C₃N₄ (V_n-CN) and LDH (V_n-CN/Co/LDH) with high-density active sites and multi-vacancies, as well as high conductivity and adsorbability, to expedite ROS generation. The degradation rate constant of ofloxacin (OFX) was 0.441 min^-1 via the V_n-CN/Co/LDH/PMS system, which was 1-2 orders greater than in the previous studies. Confirmation of the contribution ratios of various reactive oxygen species (ROS), SO₄^·- and ¹O₂ in bulk solution, O₂^·- on the catalyst surface was the most abundant ROS. The catalytic membrane was constructed utilizing Vn-CN/Co/LDH as the assembly element. The 2D membrane achieved the continuous effective discharge of OFX in the simulated water after 80 h/4 cycles of continuous flowing-through filtration-catalysis. This study provides fresh insights into designing a PMS activator for environmental remediation activated on demand.

Efficient remediation of the field soil contaminated with PAHs by amorphous porous iron material activated peroxymonosulfate

An amorphous porous iron material (FH) was firstly self-synthesized using a simple coprecipitation approach and then utilized to activate peroxymonosulfate (PMS) for the catalytic degradation of pyrene and remediation of PAHs contaminated soil on site. FH exhibited more excellent catalytic activity than traditional hydroxy ferric oxide and possessed stability at a pH range of 3.0-11.0. According to quenching studies and electron paramagnetic resonance (EPR) analyses, non-radicals (Fe(IV) = O and 1O2) were the major reactive oxygen species (ROS) in the FH/PMS system's degradation of pyrene. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FT-IR) of FH before and after the catalytic reaction, as well as active site substitution experiments and electrochemical analysis all verified that PMS adsorbed on FH could produce more abundant bonded hydroxyl groups (Fe-OH) which dominated the radical and non-radical oxidation reactions. Then, a possible pathway for pyrene degradation was presented according to gas chromatography-mass spectrometry (GC-MS). Furthermore, the FH/PMS system exhibited excellent catalytic degradation in the remediation of PAH-contaminated soil at real sites. This work provides a remarkable potential remediation technology of persistent organic pollutants (POPs) in environmental and will contribute to understanding the mechanism of Fe-based hydroxides in advanced oxidation processes.

Novel Sb-SnO2 Electrode with Ti3+ Self-Doped Urchin-Like Rutile TiO2 Nanoclusters as the Interlayer for the Effective Degradation of Dye Pollutants

Stable and efficient SnO₂ electrodes are very promising for effectively degrading refractory organic pollutants in wastewater treatment. In this regard, we firstly prepared Ti³⁺ self-doped urchin-like rutile TiO₂ nanoclusters (TiO_2-x NCs) on a Ti mesh substrate by hydrothermal and electroreduction to serve as an interlayer for the deposition of Sb-SnO₂ . The TiO_2-x NCs/Sb-SnO₂ anode exhibited a high oxygen evolution potential (2.63 V vs. SCE) and strong ⋅OH generation ability for the enhanced amount of absorbed oxygen species. Thus, the degradation results demonstrated its good rhodamine B (RhB), methylene blue (MB), alizarin yellow R (AYR), and methyl orange (MO) removal performance, with the rate constant increased 5.0, 1.9, 1.9, and 4.7 times, respectively, compared to the control Sb-SnO₂ electrode. RhB and AYR degradation mechanisms are also proposed based on the results of high-performance liquid chromatography coupled with mass spectrometry and quenching experiments. More importantly, this unique rutile interlayer prolonged the anode lifetime sixfold, given its good lattice match with SnO₂ and the three-dimensional concave-convex structure. Consequently, this work paves a new way for designing the crystal form and structure of the interlayers to obtain efficient and stable SnO₂ electrodes for addressing dye wastewater problems.

Reply to the comments on "Facilely synthesized cobalt doped hydroxyapatite as hydroxyl promoted peroxymonosulfate activator for degradation of Rhodamine B" by Zuo et al

In a Co-HAP/PMS system, catalytic degradation process of RhB was accompanied by the gradual leaching of cobalt ion. The results of additional experiments showed that leached cobalt ion indeed contributed to active PMS for RhB degradation, which was not addressed in the previous study. The finding of the contribution from leached cobalt ion to PMS activation was reported due to the valuable comments of Zuo et al., what will be concerned in the future work. Importantly, Co-HAP still showed a significant contribution to PMS activation for RhB degradation at the initial stage. Fortunately, the release of Co²⁺ from Co-HAP was slow, the secondary pollution could not be addressed due to the slightly release of Co²⁺ ion that the Co²⁺ concentration is lower than the standard of the discharge wastewater. Furthermore, the mechanism of non-radical reaction in the Co-HAP/PMS system was reported to confirm the heterogeneous catalysis of a Co-HAP/PMS system.

Comments on "Facilely synthesized cobalt doped hydroxyapatite as hydroxyl promoted peroxymonosulfate activator for degradation of Rhodamine B"

In recent years, researchers have devoted themselves to developing composites containing cobalt as highly active heterogeneous catalysts of persulfate. Most of them reported that the catalytic degradation processes of organic pollutants were accompanied by the leaching of cobalt ions, but only a few studies considered the contribution of the dissolved cobalt ion to the degradation of organic compounds. A research paper in Journal of Hazardous Materials reported a study on synthesis, application and catalytic mechanisms of cobalt doped hydroxyapatite (Co-HAP) for Rhodamine B (RhB) degradation. We find that non-main catalytic mechanisms were listed and that the effect of Co-HAP was overestimated.

Rapid removal of high-concentration Rhodamine B by peroxymonosulfate activated with Co3O4-Fe3O4 composite loaded on rice straw biochar

In this study, rice straw biochar modified with Co₃O₄-Fe₃O₄ (RSBC@Co₃O₄-Fe₃O₄) was successfully prepared via calcinating oxalate coprecipitation precursor and employed as a catalyst to activate peroxymonosulfate (PMS) for the treatment of Rhodamine B (RhB)-simulated wastewater. The results indicated that RSBC@Co₃O₄-Fe₃O₄ exhibited high catalytic performance due to the synergy between Co₃O₄ and Fe₃O₄ doping into RSBC. Approximately 98% of RhB (180 mg/L) was degraded in the RSBC@Co₃O₄-Fe₃O₄/PMS system at initial pH 7 within 15 min. The degradation efficiency of RhB maintained over 90% after the fourth cycle, illustrating that RSBC@Co₃O₄-Fe₃O₄ displayed excellent stability and reusability. The primary reactive oxygen species (ROS) answerable for the degradation of RhB were ¹O₂, •OH, and SO₄^•-. Moreover, the intermediates involved in the degradation of RhB were identified and the possible degradation pathways were deduced. This work can provide a new approach to explore Co-based and BC-based catalysts for the degradation of organic pollutants.

Activation of peroxymonosulfate by Co-Mg-Fe layered doubled hydroxide for efficient degradation of Rhodamine B

Reactive species serve as a key to remediate the contamination of refractory organic contaminants in advanced oxidation processes. In this study, a novel heterogeneous catalyst, CoMgFe-LDH layered doubled hydroxide (CoMgFe-LDH), was prepared for an efficient activation of peroxymonosulfate (PMS) to oxidize Rhodamine B (RhB). The characterization results showed that CoMgFe-LDH had a good crystallographic structure. Correspondingly, the CoMgFe-LDH/PMS process exhibited good capacity to remove RhB, which was equivalent to degradation performance as homogeneous Co(II)/PMS process. The RhB oxidation in the CoMgFe-LDH/PMS process was well described with pseudo-first-order kinetic model. Additionally, the oxidation process presented an excellent stability, and only 0.9% leaching rate was detected after six sequential reaction cycles at pH 5.0. The effects of initial pH, CoMgFe-LDH dosage, PMS concentration, RhB concentration, and inorganic anions on the RhB degradation were discussed in detail. Quenching experiments showed that sulfate radicals (SO₄^•-) acted as the dominant reactive species. Further, the removal of RhB from simulated wastewater was explored. The removal efficiency of RhB (90 μM) could reach 94.3% with 0.8 g/L of catalyst and 1.2 mM of PMS addition at pH 5.0, which indicated the CoMgFe-LDH/PMS process was also effective in degrading RhB in wastewater.

Highly efficient activation of peroxymonosulfate by biomass juncus derived carbon decorated with cobalt nanoparticles for the degradation of ofloxacin

The cobalt nanoparticles decorated biomass Juncus derived carbon (Co@JDC) was prepared by facile calcination strategy and applied to activate peroxymonosulfate (PMS) for eliminating ofloxacin (OFX) in the water environment. The results of catalytic experiments show that 97% of OFX degradation efficiency and 70.4% of chemical oxygen demand removal rate are obtained within 24 min at 0.1 g L^-1 Co@JDC, 0.2 g L^-1 PMS, 20 mg L^-1 OFX (100 mL), and pH = 7, which indicates that Co@JDC/PMS system exhibits excellent performance. Meanwhile, the experimental results of affect factor show that Co@JDC/PMS system can operate in a wider pH range (3-9) and Cl^-1, NO₃^-1, and SO₄^2- have an ignorable effect on OFX degradation. The radical identification experiments confirm that SO₄˙^-, ·OH, O₂˙^-, and ¹O₂ are involved in the process of PMS activation, especially SO₄˙^- and ¹O₂ are the main contributors. Furthermore, a possible PMS activation mechanism by Co@JDC was proposed and the degradation pathways of OFX were deduced. Finally, the stable catalytic activity, negligible leaching of Co²⁺, and the outstanding degradation efficiency for other antibiotics prove that Co@JDC possesses good stability and universality.

In Situ Formation of Copper Phosphate on Hydroxyapatite for Wastewater Treatment

Here, we control the surface activity of hydroxyapatite (HAp) in wastewater treatment which undergoes peroxodisulfate (PDS) activation. Loading the catalytically active Cu species on HAp forms a copper phosphate in the outer layer of HAp. This modification turns a low active HAp into a high catalytically active catalyst in the dye degradation process. The optimal operational conditions were established to be [Cu–THAp]₀ = 1 g/L, [RhB]₀ = 20 mg/L, [PDS]₀ = 7.5 mmol/L, and pH = 3. The experiments indicate that the simultaneous presence of Cu-THAp and PDS synergistically affect the degradation process. Additionally, chemical and structural characterizations proved the stability and effectiveness of Cu-THAp. Therefore, this work introduces a simple approach to water purification through green and sustainable HAp-based materials.

Efficient degradation of organic pollutants by activated peroxymonosulfate over TiO2@C decorated Mg-Fe layered double oxides: Degradation pathways and mechanism

To activate peroxymonosulfate (PMS) is an efficient way for decomposition of non-biodegradable organic pollutants. Herein, Mg-Fe layered double oxides decorated with Ti₃C₂ MXene-derived TiO₂@C (T/LDOs) were fabricated to efficiently activate PMS for the degradation of Rhodamine B (RhB), acid red 1 (AR1), methylene blue (MB), and tetracycline hydrochloride (TC). The T/LDOs catalyst could decompose 95.8% of RhB, 94.8% of AR1, 84.9% of MB within 10 min, and 82.4% of TC within 60 min. The degradation rate constant of RhB in the optimal T/LDOs/PMS system was approximately 2.5 and 15.7 times higher than that in the Mg-Fe LDOs/PMS system and Mg-Fe LDH/PMS system, respectively. Importantly, the T/LDOs exhibited a wide working pH range (3.1-11.0) and high stability with low metal ions leaching, indicating its potential practical applications. Quenching experiments and electronic spin resonance results confirmed that both ^•O₂^- and ¹O₂ were the dominant active species in the T/LDOs/PMS system. In addition, the possible degradation pathway of RhB in the 5%-T/LDOs/PMS system was proposed. Finally, the catalytic mechanism study revealed that the T/LDOs with abundant surface hydroxyl groups and a certain amount of TiO₂@C facilitated the electron transfer between ≡Fe^(Ⅲ)‒OH complex and HSO₅^-, boosting the generation of ^•O₂^- and ¹O₂. This study provides an insight into exploiting highly efficient catalysts for PMS activation towards the degradation of organic pollutants.

Enhanced Degradation of Rhodamine B through Peroxymonosulfate Activated by a Metal Oxide/Carbon Nitride Composite

The development of high catalytic performance heterogeneous catalysts such as peroxymonosulfate (PMS) activators is important for the practical remediation of organic pollution caused by Rhodamine B (RhB). An economical and facile synthesized composite of copper–magnesium oxide and carbon nitride (CM/g-C3N4) was prepared by the sol-gel/high-temperature pyrolysis method to activate PMS for RhB degradation. CM/g-C3N4 exhibited a splendid structure for PMS activation, and the aggregation of copper–magnesium oxide was decreased when it was combined with carbon nitride. The introduction of magnesium oxide and carbon nitride increased the specific surface area and pore volume of CM/g-C3N4, providing more reaction sites. The low usage of CM/g-C3N4 (0.3 g/L) and PMS (1.0 mM) could rapidly degrade 99.88% of 10 mg/L RhB, and the RhB removal efficiency maintained 99.30% after five cycles, showing the superior catalytic performance and reusability of CM/g-C3N4. The synergistic effect of copper and g-C3N4 improved the PMS activation. According to the analyses of EPR and quenching experiments, SO4•−, •OH and O2•− radicals and 1O2 were generated in the activation of PMS, of which SO4•− and 1O2 were important for RhB removal. The toxicity of RhB was alleviated after being degraded by the CM/g-C3N4/PMS system. This study provides an efficient and promising strategy for removing dyes in water due to the hybrid reaction pathways in the CM/g-C3N4/PMS system.

Waste eggshell-supported CuO used as heterogeneous catalyst for reactive blue 19 degradation through peroxymonosulfate activation (CuO/eggshell catalysts activate PMS to degrade reactive blue 19)

Advanced oxidation processes play an important role in the removal of organic pollutants from wastewater, in which it is essential to develop an eco-friendly, effective, stable, and inexpensive catalyst. Herein, waste eggshell-supported copper oxide (CuO/eggshell) was synthesized via a facile method and employed as peroxymonosulfate (PMS) activator for the elimination of reactive blue 19 (RB19). CuO/eggshell exhibited high degradation efficiency of RB19 (approximately 100%) by activation of PMS under the optimum conditions of 20 mg/L RB19, 0.2 g/L CuO/eggshell, 0.36 mM PMS, and initial pH 7.12 within 20 min. In addition, the effects of catalyst dosage, PMS concentration, initial pH, inorganic ions, and humic acid on RB19 degradation were investigated. Scavenging experiments and electron paramagnetic resonance revealed that multiple reactive oxygen species, including sulfate radicals (SO₄^·-), hydroxyl radicals (^·OH), superoxide radicals (O₂^·-), and singlet oxygen (¹O₂), contributed to RB19 degradation, and ¹O₂ played a dominant role. Finally, a possible PMS activation mechanism was proposed. This study suggests that loading catalytically active components onto waste eggshell is eco-friendly and effective for enhancing the degradation of dyes from wastewater.

Light-Activated Hydroxyapatite Photocatalysts: New Environmentally-Friendly Materials to Mitigate Pollutants

This review focuses on a reasoned search for articles to treat contaminated water using hydroxyapatite (HAp)-based compounds. In addition, the fundamentals of heterogeneous photocatalysis were considered, combined with parameters that affect the pollutants’ degradation using hydroxyapatite-based photocatalyst design and strategies of this photocatalyst, and the challenges of and perspectives on the development of these materials. Many critical applications have been analyzed to degrade dyes, drugs, and pesticides using HAp-based photocatalysts. This systematic review highlights the recent state-of-the-art advances that enable new paths and good-quality preparations of HAp-derived photocatalysts for photocatalysis.

Enhancement strategies for efficient activation of persulfate by heterogeneous cobalt-containing catalysts: A review

As a clean and efficient technology for the degradation of organic contaminants, sulfate radical based advanced oxidation processes (SR-AOPs) have attracted more and more attention in the past decades. Cobalt is regarded as the most reactive and efficient non-noble metal catalyst for the activation of persulfate including peroxymonosulfate (PMS) and peroxydisulfate (PDS) to produce sulfate radicals. Due to the limitations of homogeneous catalytic systems, the heterogeneous cobalt-containing catalysts have been emerged and rapidly developed. Various strategies have been schemed to further enhance the activation ability of persulfate by heterogeneous cobalt-containing catalysts. This paper provides an overview on the recent progress in enhancement strategies for the highly efficient activation of persulfate by heterogeneous cobalt-containing catalysts. With a brief introduction on the chemistry and feature of sulfate radical reactions catalyzed by homogeneous Co²⁺/Co³⁺ species, the main strategies for enhancing persulfate activation by heterogeneous cobalt-containing catalysts are summarized, such as surface and morphology design, multiple reactive centers design, organic-inorganic hybrids and heterostructure composites. Future perspectives of heterogeneous SR-AOPs systems catalyzed by cobalt-containing catalysts are outlined.

One-step pyrolysis for preparation of sulfur-doped biochar loaded with iron nanoparticles as an effective peroxymonosulfate activator for RhB degradation

In this study, sulfur-doped biochar loaded with iron nanoparticles (Fe/S-BC) was easily prepared by a one-pot pyrolysis method using anhydrous FeCl3, Na2S2O3·5H2O, and cherry stone powder as raw materials and...

PMS activation by magnetic cobalt-N-doped carbon composite for ultra-efficient degradation of refractory organic pollutant: Mechanisms and identification of intermediates

Refractory organic pollutant effluent has led to severe water pollution. In this study, magnetic Co-N-doped carbon hybrid catalysts (Co-NC-x) were fabricated using a facile cation exchange combined pyrolysis and self-reduction technique to activate peroxymonosulfate (PMS) for rehabilitation of the water environment. Factors affecting the catalytic activity of the Co-NC-850 were comprehensively examined. 100% of RhB degradation efficiency within 20 min was achieved in the Co-NC-850/PMS system at the optimum conditions (C₀ = 80 mg L^-1, catalyst loading 0.025 g L^-1, PMS concentration 0.8 mM, native pH and 25 °C). The electron paramagnetic resonance measurements and competitive quenching tests demonstrated that a sulfate radical (SO₄•^-) and singlet oxygen (¹O₂) account for RhB degradation in the Co-NC-850/PMS system, and ¹O₂ contributed ~86.2% to RhB removal. The synergistic effect of Co⁰ nanoparticles (NPs) and NC on Co-NC-850 might induce a predominant non-radical route to trigger PMS activation for RhB degradation. Direct oxidation of O₂•^- by a hydroxyl radical (•OH) might be the crucial process for forming ¹O₂. Magnetic response and successive cycles verified that Co-NC-850 has superior separable performance and reusability. This innovative magnetic Co-NC-850 hybrid catalyst for PMS activation delivered vast potential for disintegration of refractory organic contaminants.

Bisphenol A degradation by peroxymonosulfate photo-activation coupled with carbon-based cobalt ferrite nanocomposite: Performance, upgrading synergy and mechanistic pathway

Cobalt ferrite (CoFe₂O₄, CF) nanoparticles were anchored on the multiwalled carbon nanotube (MWCNT) for synthesis of CF@MWCNT nanocomposite and enhancing the catalytic activity of CF. After well characterization, it was applied as a catalyst towards photo-activation peroxymonosulfate (PMS) for degradation of bisphenol A (BPA). Based on the identified intermediates, a possible degradation pathway was proposed for BPA. CF@MWCNT coupled with PMS and UV (i.e., CF@MWCNT/PMS/UV) exhibited a better performance than homogeneous UV-assisted PMS processes under Fe and Co ions. A significant synergy on the degradation of BPA was observed in the simultaneous application of catalyst, UV light and PMS. Under optimum conditions, the removal efficiencies of 100 and 72.6% were attained respectively for BPA and TOC by CF@MWCNT/PMS/UV within 60 min reaction. These efficiencies were decreased to 88 and 61% after five times use of catalyst, respectively. The leaching of metal ions dissolved from the catalyst was slight during cyclic utilization of catalyst, confirming high stability of CF@MWCNT. In this process, the participation of radical mechanisms was approximately 60%, which SO₄^•- and HO^• species contributed as predominant oxidizing reactive species. It also showed the excellent catalytic performance towards decomposition of persulfate and hydrogen peroxide. Overall, UV-assisted PMS catalyzed by CF@MWCNT exhibited a good catalytic performance and so it can be potentially introduced as a promising method for efficient treatment of water contaminated by BPA.

Influence of the Metal Incorporation into Hydroxyapatites on the Deactivation Behavior of the Solids in the Esterification of Glycerol

The effects of the metal incorporation into hydroxyapatites on the deactivation behavior of the solids were examined in the esterification of glycerol (EG) reaction. The introduction of Cu, Co, or Ni ions by ion exchange in calcium-deficient hydroxyapatites resulted in active catalysts for the EG reaction. The metal contents were varied from 2.0 to 17.0%, providing better performances at rather high metal contents. Part of metal species existed in the hydroxyapatite lattice structure and also as isolated Cu2+, Ni2+, and Co2+ entities on the surface, as shown by XPS and EPR. The effects of the reaction temperature, reaction time, and glycerol to acetic acid molar ratios were deeply investigated. The spent solids used in this study were characterized by XRD, FTIR, SEM-EDS, chemical analyses, EPR, and XPS. The Cu2+–OH acid pairs could promote a superior catalytic performance of Cu-containing hydroxyapatites due to the resistance of these solids against leaching of the active species, which is even better than those of Co and Ni-containing counterparts with high metal contents. Cu into hydroxyapatite had a good reusability and long-term utilization for five consecutive cycles of 24 h under a glycerol to acetic acid molar ratio of 0.25 at 80 °C, and longer reaction times provide triacetin formation. This was due to the fact that Cu was stabilized by interacting with Ca, PO4, and OH sites into the hydroxyapatite lattice, being highly active for the EG reaction. The results also revealed that isolated Cu2+ sites played an important role in enhancing the glycerol conversion, intrinsically due to the Cu-containing hydroxyapatites ability to avoid strong adsorption of glycerol oligomers on the catalytic sites.

Gallium-Containing Hydroxyapatite as a Promising Material for Photocatalytic Performance

The development of photocatalystsor their modification to obtain new photocatalytic performances for the removal of contaminants is a challenge. Hydroxyapatite (HAp), (Ca10(PO4)6(OH)2), is an inorganic component with a high superficial area and low toxicity and the presence of metal in its structure can be an interesting strategy for the photocatalytic approach. This work aimed to synthesize gallium-containing HAp (Ga-HAp) as a promising material for photocatalytic performance. The synthesis was performed by the suspension–precipitation method. The material was characterized by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Morphological analysis employed field emission scanning electron microscope (FESEM) and the elemental analysis by energy-dispersive spectroscopy (EDS). To evaluate the photocatalytic activity, methylene blue (MB) dye was used as a pollutant model under UV light for 120 min. The influence of Ga-HAp concentration (0.25, 0.50, and 1.00 g·L−1) and kinetic reaction was also studied. The Ga-HAp was successfully obtained by the suspension–precipitation method. The structural characterization by XRD and FESEM-EDS elucidated the presence of gallium in the structure of hydroxyapatite. The XPS results indicated the substitution of gallium in the crystal lattice of the material. The discoloration rate of MB dye using Ga-Hap was calculated by pseudo first-order kinetics, and the best rate constant was 7.5 × 10−3 min−1 using 1.00 g·L−1 of photocatalyst. The concentration of Ga-HAp influenced the photocatalytic process, because the discoloration rate increased as a function of the concentration of material. Therefore, Ga-HAp is a promising material for environmental remediation.