Tuning the amphiphilicity of terpyridine-based fluorescent probe in water: Assembly and disassembly-controlled H g2+ sensing, removal, and adsorption of H2S

Carbon dots/Ruthenium(III) nanocomposites for FRET fluorescence detection and removal of mercury (II) via assembling into nanofibers

The determination and removal of mercury(II) (Hg2+) are essential for human health and environmental ecosystems. Herein, an ingenious carbon dots (CDs)-based Förster resonance energy transfer (FRET) system (N, S-CDs/Ru) was fabricated employing CDs and Ru3+ units as energy-transfer doner/acceptor pairs for visual detection and efficient removal of Hg2+. The treatment of Hg2+ induced a remarkable linear enhancement of the ratiometric fluorescence (F613 nm/F478 nm) with a detection limit (LOD) of 95 nM, along with continuous fluorescence color variations from blue to red. Given that the fluorescence color recognition and processing realized the real-time and rapid quantitation of Hg2+ by paper-based smartphone sensing platform. The mechanistic study revealed that the N/S/O-rich surface of the system enabled the Hg2+-triggered self-assembly from dots to nanofibers, combing with the active FRET process. Also, the efficient removal of Hg2+ with a removal efficiency of ∼98 % and an adsorption capacity of ∼372 mg/g was obtained. Furthermore, it was found that N, S-CDs/Ru loaded commercialized SiO2 or SBA-15 could facilitate the removal of Hg2+ with a removal efficiency over 99 % and an adsorption capacity up to ∼562 mg/g. This study provides a potential strategy for environmental monitoring and remediation.

Dansyl-labelled cellulose as dual-functional adsorbents for elimination and detection of mercury in aqueous solution via aggregation-induced emission

Dansyl chloride fluorophore exhibits typical aggregation induced fluorescence emission behavior in acetone/water solution. To realize the integration of detective and adsorptive functions, dansyl chloride is covalently immobilized on cellulose substrate to fabricate an efficient adsorbent for mercury ions in water. The as-prepared material exhibits excellent fluorescence sensing performance exclusively for Hg (II) with the presence of other metal ions. A sensitive and selective fluorescence quenching across the concentration range of 0.1-8.0 mg/L is observed with a detection limit of 8.33 × 10^-9 M as a result of the inhibition of aggregation induced emission caused by the coordination between adsorbent and Hg (II). Besides, the adsorption properties for Hg (II) including the influence of initial concentration and contact time are investigated. Langmuir model and pseudo-second-order kinetics are demonstrated to fit well with the adsorption experiment for the uptake of Hg (II) by the functionalized adsorbent, also, intraparticle diffusion kinetic model is proved to aptly describe the Hg (II) removal in aqueous solution. In addition, the recognition mechanism is considered to originate from the Hg (II) triggered structural reversals of naphthalene ring units which are verified by the X-ray photoelectron spectroscopy and density functional theory calculation. Moreover, the synthesis method used in this work also provides a strategy for the sensing application of organic sensor molecules with AIE properties in which the aggregated behavior could be appropriately realized.

Novel fluorescent probe for sequential recognition of Zn2+ and pyrophosphate in aqueous based on aggregation-induced emission

A new fluorescent probe (E)-4-(4-([2,2':6',2''-terpyridin]-4'-yl)styryl)-1-dodecylpyridin-1-ium (TPy-SD), with the aggregation-induced emission (AIE) property in aqueous solution, has been synthesized and characterized. The new probe, TPy-SD exhibited excellent selectivity and sensitivity towards Zn²⁺ with a relatively low detection limit (1.76 × 10^-7 M). The addition of Zn²⁺ is thought to disrupt the AIE property of TPy-SD, thereby leading to a fluorescence blue shift. Interestingly, the complex of probe TPy-SD with Zn²⁺ (Zn (II) TPy-SD), with molar ratio of 1:1, can be used as a simple, sensitive, and rapid means for the detection of pyrophosphates (PPi) in solution (water/DMSO = 99:1). As evidenced by transmission electron microscopy (TEM), dynamic light scattering (DLS) and fluorescence emission spectroscopy, this detection is thought to be due to the strong affinity between PPi and Zn²⁺, which brings out Zn²⁺ from the coordination cavity of chemical sensor TPy-SD, thus realizing the detection and recognition of PPi. Therefore, the new AIE fluorescent probe can be used as a dual probe for the detection of cations and anions.

A highly selective colorimetric and fluorescent probe Eu(tdl)2abp for H2S sensing: Application in live cell imaging and natural water

Using 4-([2,2': 6', 2'- terpyridin] -4'-yl) -N, N-dimethylaniline (tdl) as auxiliary ligand and 6-azido-2,2'-bipyridine (abp) as recognition ligand, a europium complex fluorescent probe Eu(4-([2,2': 6', 2'-terpyridin] -4' -yl) -N, N-dimethylaniline)₂-6-azido-2,2'-bipyridine Eu(tdl)₂abp for efficient and specific recognition of hydrogen sulfide (H₂S) was successfully synthesized and characterized by NMR and MS. Eu(tdl)₂abp represented "on-off" fluorescence signals for H₂S and its color changes could be identified with naked eyes. Eu(tdl)₂abp had short response time (2 min) to H₂S, high selectivity and good anti-interference, large stokes shift (207 nm). In various samples, when H₂S existed, the azide group was reduced to amine group, resulting in closed fluorescence signal, and the fluorescence intensity reached the degree of quenching without being affected by other interference. At the same time, there was a good linear relationship between relative fluorescence intensity and H₂S concentration with the detection limit (LOD) of 0.64 μM. The sensing mechanism of Eu(tdl)₂abp to detect H₂S was characterized by ¹H NMR and HR-MS. Eu(tdl)₂abp was used with success for the sensitive detection of H₂S in natural water and living cells.

Insights into AIE materials: A focus on biomedical applications of fluorescence

Aggregation-induced emission (AIE) molecules have garnered considerable interest since its first appearance in 2001. Recent studies on AIE materials in biological and medical areas have demonstrated that they show their promise as biomaterials for bioimaging and other biomedical applications. Benefiting from significant advantages of their high sensitivity, excellent photostability, and good biocompatibility, AIE-based materials provide dramatically improved analytical capacities for in vivo detection and demonstration of vital biological processes. Herein, we introduce the development history of AIE molecules and recent progress in areas of biotesting and bioimaging. Additionally, this review also offers an outlook for the potential applications of versatile AIE materials for tracing and treating pathological tissues, including overcoming challenges and feasible solutions.

Double-site-based a smart fluorescent sensor for logical detecting of sulphides and its imaging evaluation of living organisms

Thiophenol and hydrosulphite are a group of toxic environmental pollutants, which contaminate land, water and food exhibiting a serious risk to human health. Herein, we reported a xanthene dye-based sensor (DSF) with dual well-known response sites for visual detecting PhSH and HSO₃^-. Specifically, when DSF reacted with PhSH firstly, the color of the solution changed to blue with bright red fluorescence emission. After added with HSO₃^-, the color of the solution became yellow, and emitted yellow fluorescence signal. However, DSF was first added with HSO₃^-, the color of the solution changed to purple with no-fluorescence emission, and then PhSH was added, the color of the solution changed to yellow with a bright yellow fluorescence. Notably, DSF exhibited high sensitivity and selectivity for PhSH and HSO₃^- detection with a very low detection limits of 2.27 nM and 22.91 nM, respectively. More importantly, DSF could detect PhSH and HSO₃^- in water, real-food and biological systems. Therefore, the experimental results showed DSF as a robust new logical monitoring tool for the detection of PhSH and HSO₃^- in water, real-food samples and biological systems.

AIE-active macromolecules: designs, performances, and applications

Aggregation-induced emission (AIE) macromolecules as emerging luminescent materials gained increasing attention owing to their good processability, high brightness, wide functionality, and smart responsiveness, with great potential in many fields.

Cucurbit[8]uril-Assisted Nucleophilic Reaction: A Unique Supramolecular Approach for Cyanide Detection and Removal from Aqueous Solution

A unique supramolecular approach of preparing and using a cucurbit[8]uril (Q[8])-based dynamic host-guest assembly for cyanide sensing in and removal from water has been successfully developed. The dicyanovinyl-attached cationic guest (1) was designed as the fluorescent response moiety for the detection of the cyanide anion via a nucleophilic addition reaction in the assist of the Q[8]-based 2:2 quaternary complexes. Furthermore, the reaction of cyanide with 1 further switched the Q[8]-based host-guest assemblies from the 2:2 complexes to the 1:1 supramolecular polymers that precipitate in water. Thus, the macrocyclic-based dynamic host-guest assembly has potential use in applications for solving the problem of toxic anion pollutants present in aqueous environments.

A dual-functional colorimetric and fluorescent peptide-based probe for sequential detection of Cu2+ and S2- in 100% aqueous buffered solutions and living cells

Highly sensitive and selectivite detection of copper ions (Cu²⁺) and hydrogen sulfide (H₂S) have become important research topics due to the potential harmful impacts of these chemicals to human health and the environment. In this study, we report the synthesis of a dual-functional peptide-based probe L (FITC-AhxSerSerHis), designed to mimic a copper-sulfur metalloprotein, and capable of continuous detection of Cu²⁺ and S^2- based on colorimetric and fluorescent methods. The new probe L displayed excellent "turn off" fluorescence response and good selectivity for Cu²⁺ ions via a modification of the tripeptide and fluorescein isothiocyanate group, and produced an obvious color change visible to the naked eye. Furthermore, as an excitable probe, the L-Cu complex could continuously detect S^2- with high selectivity and sensitivity in 100% aqueous buffered solutions. The detection limits for fluorescence titration measurements, calculated using the equation 3σ/k, were 76.7 nM (Cu²⁺) and 27.2 nM (S^2-), which were well below U.S. EPA safety levels. In addition, L could be cycled to alternately detect Cu²⁺ and S^2-, thereby making it a promising reversible probe. Moreover, L was successfully applied to monitoring Cu²⁺ and S^2- in live RKO cells through fluorescence imaging, exhibiting low cytotoxicity and good cell permeability.

A novel near-infrared fluorimetric method for point-of-care monitoring of Fe2+ and its application in bioimaging

Iron is one of the essential trace elements in the human body, which is involved in many important physiological processes of life. The abnormal amount of iron in the body will bring many diseases. Therefore, a novel near-infrared fluorimetric method was developed. The method is based on a fluorescent probe (E)-4-(2-(3-(dicyanomethylene)-5,5-dimethylcyclohex-1-en-1-yl)vinyl)-N, N-diethylaniline oxide (DDED) which uses N-oxide as a recognition group to real-time monitoring and imaging of Fe²⁺ in vivo and in vitro. The method exhibits excellent selectivity and high sensitivity (LOD = 27 nM) for Fe²⁺, fast reaction rate (< 4 min), extremely large Stokes shift (＞ 275 nm), low cytotoxicity. The strip test strongly illustrates the potential application of DDED in real environment. In particular, DDED has been successfully applied to real-time monitoring and imaging of Fe²⁺ in HepG² cells and zebrafish. That is, the method has great potential for the detection of Fe²⁺ in living systems.

Mercury Toxicity and Detection Using Chromo-Fluorogenic Chemosensors

Mercury (Hg), this non-essential heavy metal released from both industrial and natural sources entered into living bodies, and cause grievous detrimental effects to the human health and ecosystem. The monitoring of Hg2+ excessive accumulation can be beneficial to fight against the risk associated with mercury toxicity to living systems. Therefore, there is an emergent need of novel and facile analytical approaches for the monitoring of mercury levels in various environmental, industrial, and biological samples. The chromo-fluorogenic chemosensors possess the attractive analytical parameters of low-cost, enhanced detection ability with high sensitivity, simplicity, rapid on-site monitoring ability, etc. This review was narrated to summarize the mercuric ion selective chromo-fluorogenic chemosensors reported in the year 2020. The design of sensors, mechanisms, fluorophores used, analytical performance, etc. are summarized and discussed.