Synergetic effects of defects and acid sites of 2D-ZnO photocatalysts on the photocatalytic performance

Role of Morphology on Zinc Oxide Nanostructures for Efficient Photoelectrochemical Activity and Hydrogen Production

Energy generation today heavily relies on the field of photocatalysis, with many conventional energy generation strategies now superseded by the conversion of solar energy into chemical or thermal energy for a variety of energy-related applications. Global warming has pointed to the urgent necessity of moving away from non-renewable energy sources, with a resulting emphasis on creating the best photocatalysts for effective solar conversion by investigating a variety of material systems and material combinations. The present study explores the influence of morphological changes on the photoelectrochemical activity of zinc oxide nanostructures by exploiting electrodeposition and capping agents to control the growth rates of different ZnO facets and obtain well-defined nanostructures and orientations. A zinc nitrate (Zn (NO3)2) bath was used to electrodeposit ZnO nanostructures on an indium tin oxide glass (ITO) substrate at 70 °C with an applied potential of -1.0 V. Ethylenediamine (EDA) or ammonium fluoride (NH4F) were added as capping agents to the zinc nitrate bath. Extensive evaluation and characterization of the photoelectrochemical (PEC) capabilities of the resulting morphology-controlled zinc oxide nanostructures confirmed that altering the ZnO morphology can have positive impacts on PEC properties.

Transition metal compounds: From properties, applications to wettability regulation

Transition metal compounds (TMCs) have the advantages of abundant reserves, low cost, non-toxic and pollution-free, and have attracted wide attention in recent years. With the development of two-dimensional layered materials, a new two-dimensional transition metal carbonitride (MXene) has attracted extensive attention due to its excellent physicochemical properties such as gas selectivity, photocatalytic properties, electromagnetic interference shielding and photothermal properties. They are widely used in gas sensors, oil/water separation, wastewater and waste-oil treatment, cancer treatment, seawater desalination, strain sensors, medical materials and some energy storage materials. In this view, we aim to emphatically summarize MXene with their properties, applications and their wettability regulation in different applications. In addition, the properties of transition metal oxides (TMOs) and other TMCs and their wettability regulation applications are also discussed.

Comparison of TiO2 and ZnO for Heterogeneous Photocatalytic Activation of the Peroxydisulfate Ion in Trimethoprim Degradation

The persulfate-based advanced oxidation process is a promising method for degrading organic pollutants. Herein, TiO2 and ZnO photocatalysts were combined with the peroxydisulfate ion (PDS) to enhance the efficiency. ZnO was significantly more efficient in PDS conversion and SO4•- generation than TiO2. For ZnO, the PDS increased the transformation rate of the trimethoprim antibiotic from 1.58 × 10-7 M s-1 to 6.83 × 10-7 M s-1. However, in the case of TiO2, the moderated positive effect was manifested mainly in O2-free suspensions. The impact of dissolved O2 and trimethoprim on PDS transformation was also studied. The results reflected that the interaction of O2, PDS, and TRIM with the surface of the photocatalyst and their competition for photogenerated charges must be considered. The effect of radical scavengers confirmed that in addition to SO4•-, •OH plays an essential role even in O2-free suspensions, and the contribution of SO4•- to the transformation is much more significant for ZnO than for TiO2. The negative impact of biologically treated domestic wastewater as a matrix was manifested, most probably because of the radical scavenging capacity of Cl- and HCO3-. Nevertheless, in the case of ZnO, the positive effect of PDS successfully overcompensates that, due to the efficient SO4•- generation. Reusability tests were performed in Milli-Q water and biologically treated domestic wastewater, and only a slight decrease in the reactivity of ZnO photocatalysts was observed.

Ce2(MoO4)3 synthesized with oleylamine and oleic acid as additives for photocatalysis: effect of preparation method

Ce₂(MoO₄)₃ was prepared using dielectric barrier discharge (DBD) plasma method, co-precipitation method and hydrothermal method, respectively, with water/ethanol (W/O) as solvent, oleylamine (OAm) and oleic acid (OAc) as additives. Preparation method showed significant influence on the morphological and structural properties, as well as photocatalytic performance. Ce₂(MoO₄)₃ synthesized with DBD plasma (MO-P) was mainly flowerlike nanosheets, which were beneficial to promoting electron transfer and providing more space for catalytic activity. Also, MO-P samples exhibited more oxygen vacancies, which were conducive to the photocatalytic performance. What's more, MO-P showed lower PL intensity and narrow energy gap, which implied a slow photoelectron-hole pair recombination rate and an increased electron transfer rate. The degradation rate of methyl orange (50 mg/L) could achieve 98% within 12 min with 0.5 g/L MO-P. Hydroxyl radicals (·OH) and superoxide radicals (·O₂^-) played a major effect. Plasma synthesis method exhibited potential application prospect in photocatalysts preparation.

The spatially separated active sites for holes and electrons boost the radicals generation for toluene degradation

Hydroxyl (⸱OH) and superoxide (⸱O₂^-) radicals are the main drivers for photocatalysis in toluene degradation, but their generation mechanisms are still ambiguous due to the lack of direct evidence. The spatially separated active sites for holes and electrons can help to clarify the dynamic process of radicals generation. By performing theoretical calculations, it is demonstrated that the spatially separated active sites for holes and electrons on the Bi₂O₂CO₃ surface can be constructed by introducing oxygen vacancies in the [Bi₂O₂]²⁺ layer. H₂O and O₂ molecules can be better adsorbed and activated at hole and electron active sites, separately. Accordingly, the pristine and defective Bi₂O₂CO₃ are prepared. The dynamic behavior of H₂O and O₂ molecules at the matching active sites is revealed, which indicates the efficient adsorption of reactants and the substantial production of radicals. Significantly, the specificity of the spatially separated holes and electrons active sites for ⸱OH and ⸱O₂^- radicals generation, respectively, is demonstrated by in situ EPR with the H₂O vapor atmosphere. This work provides a design concept for unraveling reaction mechanisms to realize controllable radicals generation.

Insight into the surface property modification-enhanced C3N4 performance of photocatalytic nitrogen fixation

The surface properties of the catalyst have an important influence on the process of heterogeneous reactions. We modified g-C₃N₄ with dicarboxylic acids with different hydrophobicity. Through experiments, we found that the NH₃ yields of modified carbon nitrides can reach 267.89 μmol h^-1 g^-1 when only dissolved nitrogen is involved. But if both dissolved nitrogen and gaseous nitrogen are present in the reaction, the NH₃ yield can reach as high as 751.83 μmol h^-1 g^-1, demonstrating that the participation of dissolved nitrogen alone is not enough and gaseous nitrogen indeed promotes the reaction of photocatalytic nitrogen fixation. Meanwhile, the nitrogen fixation performance of the catalyst is positively correlated with its hydrophobicity, indicating that a reasonable adjustment of the catalysts' hydrophobicity can give them a certain wettability to activate water, while also providing a hydrophobic surface for insoluble gas-phase nitrogen adsorption. This provides new ideas and directions for the design of future heterogeneous reaction catalysts.

Synergy of Oxygen Vacancies and Acid Sites on N-Doped WO3 Nanobelts for Efficient C-C Coupling Synthesis of Benzoin Isopropyl Ether

The surface property of a photocatalyst, including surface acid sites and oxygen vacancies, plays a pivotal role in photocatalytic organic synthesis reactions. Benzoin isopropyl ether (BIE) is usually produced via polycondensation of benzaldehyde and catalyzed with highly toxic cyanide. Here, we report a green photocatalytic approach for the selective synthesis of BIE over WO₃ driven by a green-light-emitting diode. The improved photocatalytic activity can be attributed to the synergy of oxygen vacancies (V_Os) and acid sites over N-doped WO₃ nanobelts. The results revealed that reactant molecules were predominantly adsorbed and activated on surface oxygen vacancies (V_OSs) and the Brønsted acid promoted the etherification reaction; the introduction of V_Os and nitrogen altered the band structure and electronic properties, resulting in improved photocatalytic activity. Our work provides an efficient approach to the selective photocatalytic synthesis of organics over photocatalysts with finely tuned surface properties and band structures via defect and doping engineering.

Piezoelectric polarization promoted spatial separation of photoexcited electrons and holes in two-dimensional g-C3N4 nanosheets for efficient elimination of chlorophenols

Graphitic carbon nitride (g-C₃N₄) has been proved to be a potential photocatalyst for environment purification, but the high recombination rate of photogenerated carriers leads to the low photocatalytic efficiency. Herein, we report the enhanced degradation of chlorophenols by 2D ultrathin g-C₃N₄ nanosheets with intrinsic piezoelectricity through photopiezocatalysis strategy. Under the simultaneous visible-light irradiation and ultrasonic vibration, the 2D g-C₃N₄ presented improved removal efficiency for elimination of 2,4-dichlorophenol (2,4-DCP) with an apparent rate constant of 6.65 × 10^-2 min^-1, which was 6.7 and 2.2 times of the photocatalysis and piezocatalysis, respectively. The improved removal efficiency was attributed to the sufficient separation of free charges driven by the ultrasound-induced piezoelectric field in the 2D g-C₃N₄, which was demonstrated by the enhanced current response under photopiezocatalysis mode. Additionally, the photopiezocatalysis of 2D g-C₃N₄ was proved to possess well universality for removing different chlorophenols, as well as high durability and dechlorination efficiency. Finally, a possible photopiezocatalytic mechanism for removal of 2,4-DCP was proposed based on the electron paramagnetic resonance (EPR) technique and the determination of intermediates through liquid chromatography-mass spectrometry (LC-MS) analysis. This work provides a promising strategy for the design of energy-conversion materials towards capturing solar and mechanical energy in ambient environment.

Enhanced photocatalytic activities of a hierarchical ZnO/V2C MXene hybrid with a close coupling heterojunction for the degradation of methyl orange, phenol and methylene blue dye

A hierarchical ZnO/V2C MXene hybrid exhibited enhanced photocatalytic performance due to its close coupling heterojunction facilitating photo-generated carrier transfer.

Efficient purification of wastewater by applying mechanical force and BaCO3/TiO2 and BaTiO3/TiO2 piezocatalysts

In typical advanced oxidation catalysis, a semiconductor should have a robust capacity to generate separated electron-hole pairs on a material's surface under irradiation of photons with energy more than the material's bandgap. However, rapid charge carrier recombination and low photon to current yield of semiconductor photocatalysts and low percentages of UV light in sunlight leads to a low level of photocatalytic efficiency for practical application. Mechanical energy is a natural energy that can be considered as a form of rich, clean and renewable energy which can be harvested by using piezoelectric materials. Here, we developed BaCO₃/TiO₂ and BaTiO₃/TiO₂ composites as mechanical harvesting materials to decontaminate pollutants. Results showed that BaCO₃ has a great effect on the piezocatalytic activity of products. The control sample (sample without Ba) only degraded 11.2% of Acid Red 151 (AR151) , while the sample containing Ba degraded 96.7% of AR151. Besides, the effects of several parameters, including the natural surfactant, reaction time and temperature, calcination, and ultrasonic power and pulse on the catalytic activity of the as-prepared piezocatalysts were studied. Results showed that it is possible to degrade 99.1% of AR151 by controlling ultrasonic parameters during 2 h of mechanical energy force.

Construction of C@WS2/g-C3N4 Z-scheme photocatalyst with C film as an effective electron mediator and its enhanced degradation of 2,4-dichlorophenol under visible light

A novel Z-scheme heterojunction C@WS₂/g-C₃N₄ composite was prepared with carbon as a bridge for improving the photocatalytic property. The results of composition and structure studies demonstrate that the introduced carbon was deposited on the surface of WS₂ with a film form in the ternary composites. The analysis of optical and photo-electrochemical properties reveals that the carbon film played as an electron-mediator in the ternary composites and could improve the separation and transportation of photogenerated charge. Meanwhile, it could change the pathway of photogenerated electrons between WS₂ and g-C₃N₄, thereby constructing a Z-scheme heterojunction for maintaining the redox ability of photogenerated charge. The ternary 2%-C@WS₂/g-C₃N₄ composite exhibited an excellent photodegradation rate towards 2,4-dichlorophenol (2,4-DCP) under visible light irradiation, which was 3.15 and 3.06 times of the pure g-C₃N₄ and binary WS₂/g-C₃N₄ composite, respectively. Besides, the degradation pathway of 2,4-DCP and photocatalytic degradation mechanisms were investigated and discussed in detail. The generated ·O₂^--, ·OH and h⁺ by ternary composites could promote the dechlorination reaction of 2,4-DCP effectively and decompose it into smaller organic molecules. This work extends the design of g-C₃N₄-based 2D/2D heterojunction or Z-scheme photocatalysts to remediate the environment.

ZnO@ZIF-8 core–shell heterostructures with improved photocatalytic activity

ZnO@ZIF-8 heterostructures with ZnO as the core and ZIF-8 as the shell were successfully fabricated and completely degraded methylene blue in ∼4.5 min under solar light irradiation.

Photoinduced defect engineering: enhanced photocatalytic performance of 3D BiOCl nanoclusters with abundant oxygen vacancies

Oxygen vacancies are highly important for photocatalytic performance in bismuth oxychloride, but their preparation is limited to vacuum roasting and hydrogen annealing techniques at high temperatures (200–400 °C).

CdS nanoparticles grown in situ on oxygen deficiency-rich WO3−x nanosheets: direct Z-scheme heterojunction towards enhancing visible light-driven hydrogen evolution

This work introduces the synthesis of direct Z-scheme CdS/WO_3−x heterojunction photocatalysts and the application of photocatalytic hydrogen evolution.