Experimental investigations and numerical modelling of in-situ reactive caps for PAH contaminated marine sediments

Bio-Based Materials as a Sustainable Solution for the Remediation of Contaminated Marine Sediments: An LCA Case Study

Contaminated sediments may induce long-term risks to humans and ecosystems due to the accumulation of priority and emerging inorganic and organic pollutants having toxic and bio-accumulation properties that could become a secondary pollution source. This study focused on the screening of novel bio-based materials to be used in the decontamination of marine sediments considering technical and environmental criteria. It aimed to compare the environmental impacts of cellulose-based adsorbents produced at lab scale by using different syntheses protocols that involved cellulose functionalization by oxidation and branching, followed by structuring of an aerogel-like material via Soxhlet extraction and freeze-drying or their combination. As model pollutants, we used 4-nitrobenzaldehyde, 4-nitrophenol, methylene blue, and two heavy metals, i.e., cadmium and chromium. When comparing the three materials obtained by only employing the Soxhlet extractor with different solvents (without freeze-dying), it was observed that the material obtained with methanol did not have a good structure and was rigid and more compact than the others. A Life Cycle Assessment (LCA) was conducted to evaluate the environmental performance of the novel materials. Apart from the hierarchical categorization of the materials based on their technical and environmental performance in eliminating organic pollutants and heavy metal ions, it was demonstrated that the cellulose-based material obtained via Soxhlet extraction with ethanol was a better choice, since it had lower environmental impacts and highest adsorption capacity for the model pollutants. LCA is a useful tool to optimize the sustainability of sorbent materials alongside lab-scale experiments and confirms that the right direction to produce new performant and sustainable adsorbent materials involves not only choosing wastes as starting materials, but also optimizing the consumption of electricity used for the production processes. The main results also highlight the need for precise data in LCA studies based on lab-scale processes and the potential for small-scale optimization to reduce the environmental impacts.

G-C3N4-Ag composite mediated photocatalytic degradation of phenanthrene - A remedy for environmental pollution

In recent years, g-C3N4-Ag nanocomposite synthesis has gained considerable attention for its potential to treat polycyclic aromatic hydrocarbons (PAHs) and to act against bacteria and fungi. In this study, we present a novel approach to the synthesis of g-C3N4-Ag nanocomposite and evaluate its efficiency in both PAH removal and antimicrobial activity. The synthesis process involved the preparation of g-C3N4 by thermal polycondensation of melamine. The factors that affect the adsorption process of PAHs, like time, pH, irradiation type, and adsorbent dosage, were also evaluated. Isotherm models like Langmuir and Freundlich determined the adsorption capability of g-C3N4-Ag. In simulated models, phenanthrene was degraded to a maximum of 85% at lower concentrations of catalyst. The adsorption profile of phenanthrene obeys the pseudo-second-order and Freundlich isotherms pattern. The g-C3N4-Ag nanocomposite also exhibited antimicrobial activity against bacteria (Escherichia coli, Bacillus subtilis, Staphylococcus aureus, Klebsiella pneumoniae) and fungi (Candida albicans). The present study is the first report stating the dual application of g-C3N4-Ag nanocomposite in reducing the concentration of PAH and killing bacterial and fungal pathogens. The higher adsorption capability proclaimed by g-C3N4-Ag nanocomposite shows the fabricated nanomaterial with great potential to remediate organic pollutants from the ecosystem.

Utilizing a granulated coal bottom ash and oyster shells for nutrient removal in eutrophic sediments

Various in-situ capping materials have been studied to remediate contaminated sediments for sustaining a healthy ecosystem in a coastal area. We developed Granulated coal bottom ash and oyster shells (GBO) with different mixing ratios of OS. Pyrolyzed and grounded coal bottom ash and oyster shells were used to produce GBO, which the main chemical elements were analogous to cement. The nutrient-removal abilities of GBO were evaluated through long-term mesocosm experiments. It was found that GBO was an effective in-situ capping material for remediation of eutrophic coastal sediments, decreasing PO₄-P and SiO₂-Si concentrations in pore water by 88.4% and 56.5%, respectively. The most efficient mixing ratio of coal bottom ash and oyster shells was at a weight ratio of 1:1 for PO₄-P and SiO₂-Si removal.

A review of the in-situ capping amendments and modeling approaches for the remediation of contaminated marine sediments

Contaminated sediments can pose long-term risks to human beings and ecosystems as they accumulate inorganic and organic contaminants becoming a sink and source of pollution. Compared to ex-situ technologies (i.e., dredging activities and off site treatments), in-situ capping (ISC) intends to minimize contaminated sediment mobilization and impact into the water column whilst treating contamination. Literature shows that numerous types of ISC amendments in presence of both organic and inorganic pollutants are investigated, although a few are contributions whose experiments have been designed and conducted with a view to future engineering. Against this background of shortcomings, this review paper intends to investigate ISC reliability, applicability and its long-term effectiveness, by also comparing reactive and physical ISCs. Additionally, an examination of the main numerical simulations applied to ISC technology was carried out. We found that activated carbon and organoclay resulted the most studied amendments for organically contaminated sediment, whereas biochar, clay minerals, and industrial-by products were more employed in presence of sediment contaminated by metal(loids). There is no better ISC system in absolute terms, since technological performance depends on many factors and only a few experimental investigations included a long-term modeling phase to predict ISC long-term efficiency. Most of numerical models included simplified transport equations based on diffusion and adsorption, and the goodness of fitting between experimental and modeled data was not always computed. The review finally discusses new research directions such as the need for long-term applications on field-scale and cap effectiveness in presence of site-specific tidal forces and currents.

A holistic DPSIR-based approach to the remediation of heavily contaminated coastal areas

This paper proposes a holistic approach to connect anthropogenic impacts to environmental remediation solutions. The eDPSIR (engineered-Drivers-Pressures-States-Impacts-Responses) framework aims at supporting the decision-maker in designing technological solutions for a contaminated coastal area, where the natural matrices need to be cleaned up. The eDPSIR is characterized by cause-effect relationships that are operationally implemented through three multidisciplinary toolboxes: (i) Toolbox 1, to connect driving forces with pressures, classifying the state of the system and allowing the identification of target contaminants and the extent of contamination; (ii) Toolbox 2, to quantify bioaccumulation also by identifying corresponding areas; (iii) Toolbox 3, to identify the most suitable remediation solutions for previously identified contaminated areas, named contamination scenarios. The eDPSIR was calibrated on the case study of the Mar Piccolo in Taranto (Southern Italy), one of the most complex and polluted areas in Europe. While the consolidated DPSIR allows for a strategic response by limiting the use of contaminated areas or reducing upstream pressures, the eDPSIR made it possible to structure with a semi-quantitative logic the problem of assisting the decision-makers in choosing the optimal technological remediation responses for each sediment scenario of contamination (heavy metal; organic compounds; mixed). Assisted natural attenuation was identified as the best remediation technology in terms of treatment effectiveness and smallest amount of impacts involved in the project actions. However, considering the scenario of mixed contamination, in-situ reactive capping reached a good rank with a value of the composite indicator equal to 99.5%; thermal desorption and stabilization/solidification recorded a value of 94.1% and 84.6%, respectively. The application of these toolboxes provides alternative means to interpret, manage, and solve different cases of global marine contaminated sites.

DPSIR Model Applied to the Remediation of Contaminated Sites. A Case Study: Mar Piccolo of Taranto

The study critically analyses the complex situation of the Mar Piccolo of Taranto (South of Italy), considered one of the most polluted marine ecosystems in Europe. In order to investigate possible cause–effect relationships, useful to plan appropriate planning responses or remediation technologies to be adopted, the Driver–Pressure–State–Impact–Response (DPSIR) model was applied. Methodologically, about 100 references have been considered, whose information was organized according to the logical scheme of the DPSIR. The results showed how the Mar Piccolo is the final receptor of pollutants coming from all industrial and agricultural activities, especially due to its natural hydrogeological network conformation. The anthropic activity represents a critical impact on the ecosystem due to the subsequent marine litter. The mobility of contaminants from sediments to the water column showed the potential risk related to the bioaccumulation of organisms from different trophic levels, posing a threat of unacceptable magnitude to human safety. The paper concludes by discussing the actions currently implemented by the authorities in response to the anthropogenic impacts as well as the need for new ones concerning both plans, programs, and remediation interventions. The case study shows how the DPSIR is a useful framework to organize extensive and heterogeneous information about a complex environmental system, such as the one investigated. This preliminary organization of the available data can represent the starting point for the development of a DPSIR-based Environmental Decision Support System (EDSS) with robust cause–effect relationships.

Remediation of a Petroleum Hydrocarbon-Contaminated Site by Soil Vapor Extraction: A Full-Scale Case Study

Spills, leaks, and other environmental aspects associated with petroleum products cause hazards to human health and ecosystems. Chemicals involved are total petroleum hydrocarbons (TPH), polycyclic aromatic hydrocarbons (PAHs), solvents, pesticides, and other heavy metals. Soil vapor extraction (SVE) is one of the main in-situ technologies currently employed for the remediation of groundwater and vadose zone contaminated with volatile organic compounds (VOCs). The performance of an SVE remediation system was examined for a petroleum hydrocarbon-contaminated site with attention to remediation targets and final performance. The study assessed: (1) the efficiency of a full-scale remediation system and (2) the influence of parameters affecting the treatment system effectiveness. Results showed how VOC concentration in soil was highly reduced after four year treatment with a global effectiveness of 73%. Some soil samples did not reach the environmental threshold limits and, therefore, an extension of the remediation period was required. The soil texture, humidity, permeability, and the category of considered pollutants were found to influence the amount of total extracted VOCs.