rGO modified nanoplate-assembled ZnO/CdO junction for detection of NO2

Selective and Scalable CO2 Electrolysis Enabled by Conductive Zinc Ion-Implanted Zeolite-Supported Cadmium Oxide Nanoclusters

Catalyst supports play an essential role in catalytic reactions, hinting at pronounced metal-support effects. Zeolites are a propitious support in heterogeneous catalysts, while their use in the electrocatalytic CO2 reduction reaction has been limited as yet because of their electrically insulating nature and serious competing hydrogen evolution reaction (HER). Enlightened by theoretical prediction, herein, we implant zinc ions into the structural skeleton of a zeolite Y to strategically tailor a favorable electrocatalytic platform with remarkably enhanced electronic conduction and strong HER inhibition capability, which incorporates ultrafine cadmium oxide nanoclusters as guest species into the supercages of the tailored 12-ring window framework. The metal d-bandwidth tuning of cadmium by skeletal zinc steers the extent of substrate-molecule orbital mixing, enhancing the stabilization of the key intermediate *COOH while weakening the CO poisoning effect. Furthermore, the strong cadmium-zinc interplay causes a considerable thermodynamic barrier for water dissociation in the conversion of H+ to *H, potently suppressing the competing HER. Therefore, we achieve an industrial-level partial current density of 335 mA cm-2 and remarkable Faradaic efficiency of 97.1% for CO production and stably maintain Faradaic efficiency above 90% at the industrially relevant current density for over 120 h. This work provides a proof of concept of tailored conductive zeolite as a favorable electrocatalytic support for industrial-level CO2 electrolysis and will significantly enhance the adaptability of conductive zeolite-based electrocatalysts in a variety of electrocatalysis and energy conversion applications.

The mechanism of nanozyme activity of ZnO-Co3O4-v: Oxygen vacancy dynamic change and bilayer electron transfer pathway for wound healing and virtual reality revealing

Since the catalyst's surface was the major active location, the inner structure's contribution to catalytic activity was typically overlooked. Here, ZnO-Co3O4-v nanozymes with several surfaces and bulk oxygen vacancies were created. The O atoms of H2O2 moved inward to preferentially fill the oxygen vacancies in the interior and form new "lattice oxygen" by the X-ray photoelectron spectroscopy depth analysis and X-ray absorption fine structure. The internal Co2+ continually transferred electrons to the surface for a continuous catalytic reaction, which generated a significant amount of reactive oxygen species. Inner and outer double-layer electron cycles accompanied this process. A three-dimensional model of ZnO-Co3O4-v was constructed using virtual reality interactive modelling technology to illustrate nanozyme catalysis. Moreover, the bactericidal rate of ZnO-Co3O4-v for Methionine-resistant Staphylococcus aureus and Multiple drug resistant Escherichia coli was as high as 99%. ZnO-Co3O4-v was biocompatible and might be utilized to heal wounds following Methionine-resistant Staphylococcus aureus infection. This work offered a new idea for nanozymes to replace of conventional antibacterial medications.

ZnO nanostructured matrix as nexus catalysts for the removal of emerging pollutants

Water pollution stands as a pressing global environmental concern, elevating the significance of innovative, dependable, and sustainable solutions. This study represents an extensive review of the use of photocatalytic zinc oxide nanoparticles (ZnO NPs) for the removal of emerging pollutants from water and wastewater. The study examines ZnO NPs' different preparation methods, including physical, chemical, and green synthesis, and emphasizes on advantages, disadvantages, preparation factors, and investigation methods for the structural and morphological properties. ZnO NPs demonstrate remarkable properties as photocatalysts; however, their small dimensions pose an issue, leading to potential post-use environmental losses. A strategy to overcome this challenge is scaling up ZnO NP matrices for enhanced stability and efficiency. The paper introduces novel ZnO NP composites, by incorporating supports like carbon and clay that serve as photocatalysts in the removal of emerging pollutants from water and wastewater. In essence, this research underscores the urgency of finding innovative, efficient, and eco-friendly solutions for the removal of emerging pollutants from wastewater and highlights the high removal efficiencies obtained when using ZnO NPs obtained from green synthesis as a photocatalyst. Future research should be developed on the cost-benefit analysis regarding the preparation methods, treatment processes, and value-added product regeneration efficiency.

Ocimum sanctum Leaf Extract-Assisted Green Synthesis of Pd-Doped CuO Nanoparticles for Highly Sensitive and Selective NO2 Gas Sensors

In view of facile, cost-effective, and environmentally friendly synthetic methods, palladium-doped copper oxide (Pd-CuO) nanoparticles have been synthesized from Ocimum sanctum (commonly known as "Tulsi") phytoextract for gas-sensing applications. The structural, morphological, and compositional properties of Pd-doped CuO nanoparticles were studied using various techniques such as XRD, FESEM, XPS, and EDX. The characterization results confirmed the doping of Pd on CuO nanoparticles, and Pd-CuO nanostructures appear as nanoflakes in FESEM analysis. The gas-sensing response of Pd (1.12 wt %)-CuO nanoflake-based sensor was measured at 5-100 ppm concentration of different gases, NO2, H2S, NH3, and H2, at 125 °C. Gas-sensing tests reveal that the sensitivity of the sensor were 81.7 and 38.9% for 100 and 5 ppm concentrations of NO2, respectively, which was significantly greater than that of pure CuO. The response and recovery times of the sensor were 72 and 98 s for 100 ppm of NO2 gas, while they were 90 and 50 s for 5 ppm NO2. The calculated limit of detection (LOD) value of the sensor is 0.8235. This appealing LOD is suitable for real-time gas detection. The gas sensor was found to exhibit excellent selectivity toward NO2 gas and repeatability and stability in humid (80%) conditions. The Pd doping in CuO nanostructures plays a significant role in escalating the sensitivity and selectivity of CuO-based NO2 gas sensor suitable to work at low operating temperatures.

Ultralow detection limit and ultrafast response/recovery of the H2 gas sensor based on Pd-doped rGO/ZnO-SnO2 from hydrothermal synthesis

Hydrogen (H2) sensors are of great significance in hydrogen energy development and hydrogen safety monitoring. However, achieving fast and effective detection of low concentrations of hydrogen is a key problem to be solved in hydrogen sensing. In this work, we combined the excellent gas sensing properties of tin(IV) oxide (SnO2) and zinc oxide (ZnO) with the outstanding electrical properties of reduced graphene oxide (rGO) and prepared palladium (Pd)-doped rGO/ZnO-SnO2 nanocomposites by a hydrothermal method. The crystal structure, structural morphology, and elemental composition of the material were characterized by FE-SEM, TEM, XRD, XPS, Raman spectroscopy, and N2 adsorption-desorption. The results showed that the Pd-doped ZnO-SnO2 composites were successfully synthesized and uniformly coated on the surface of the rGO. The hydrogen gas sensing performance of the sensor prepared in this work was investigated, and the results showed that, compared with the pure Pd-doped ZnO-SnO2 sensor, the Pd-doped rGO/ZnO-SnO2 sensor modified with 3 wt% rGO had better hydrogen (H2)-sensing response of 9.4-100 ppm H2 at 380 °C. In addition, this sensor had extremely low time parameters (the response time and recovery time for 100 ppm H2 at 380 °C were 4 s and 8 s, respectively) and an extremely low detection limit (50 ppb). Moreover, the sensor exhibited outstanding repeatability and restoration. According to the analysis of the sensing mechanism of this nanocomposite, the enhanced sensing performance of the Pd-doped rGO/ZnO-SnO2 sensor is mainly due to the heterostructure of rGO, ZnO, and SnO2, the excellent electrical and physical properties of rGO and the synergy between rGO and Pd.

Distinct response patterns of bacterial communities in Ag- and ZnO-rGO nanocomposite-amended silt loam soils

The widespread application of metal-based nanoparticle (MNPs)/reduced graphene oxide (rGO) composites inevitably leads to their release into soils. However, we lack a detailed understanding of the bacterial community response to MNPs-rGO exposure in farmland soils. Here, we conducted a soil microcosm experiment to analyze the potential impact of MNPs-rGO on bacterial communities in two field soils via high-throughput sequencing. The change in alpha diversity of bacterial communities was more susceptible to Ag-rGO and ZnO-rGO treatments than CuO-rGO. In both soils, MNPs-rGO significantly changed the bacterial community structure even at a low dose (1 mg kg^-1). The bacterial community structure was most strongly affected by Ag-rGO at 30 days, but the greatest changes occurred in ZnO-rGO at 60 days. The differences in soil properties could shape bacterial communities to MNPs-rGO exposure. Distance-based redundancy analysis and functional annotation of prokaryotic taxa showed that some bacterial species associated with nitrogen cycling were greatly influenced by Ag-rGO and ZnO-rGO exposure. In sum, Ag-rGO and ZnO-rGO may potentially affect bacterial communities and nitrogen turnover under long-term realistic field exposure. These findings present a perspective on the response of bacterial communities to MNPs-rGO and provide a fundamental basis for estimating the ecological behavior of MNPs-rGO.

Ultra-sensitive H2S sensor based on sunflower-like In-doped ZnO with enriched oxygen vacancies

In–ZnO with oxygen vacancies exhibits a higher sensing response and a shorter recovery time for H2S compared to ZnO.

Improving Gas-Sensing Performance Based on MOS Nanomaterials: A Review

In order to solve issues of air pollution, to monitor human health, and to promote agricultural production, gas sensors have been used widely. Metal oxide semiconductor (MOS) gas sensors have become an important area of research in the field of gas sensing due to their high sensitivity, quick response time, and short recovery time for NO₂, CO₂, acetone, etc. In our article, we mainly focus on the gas-sensing properties of MOS gas sensors and summarize the methods that are based on the interface effect of MOS materials and micro–nanostructures to improve their performance. These methods include noble metal modification, doping, and core-shell (C-S) nanostructure. Moreover, we also describe the mechanism of these methods to analyze the advantages and disadvantages of energy barrier modulation and electron transfer for gas adsorption. Finally, we put forward a variety of research ideas based on the above methods to improve the gas-sensing properties. Some perspectives for the development of MOS gas sensors are also discussed.

An electrochemical platform based on a hemin-rGO-cMWCNTs modified aptasensor for sensitive detection of kanamycin

Kanamycin (KANA) residue in meat is particularly harmful to public health and there is an urgent need to establish a fast, accurate and low-cost method to determinate KANA in food quality control. In this paper, hemin-reduced graphene oxide-carboxylated multiwalled carbon nanotubes (hemin-rGO-cMWCNTs) were designed and prepared, and the characteristics of hemin-rGO-cMWCNTs are presented. After that, an aptamer/hemin-rGO-cMWCNTs sensor for determination of KANA was developed. The electrochemical characteristics were studied by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS). Under optimal conditions, the sensitive response of the aptasensor towards KANA presented a wide concentration range of 10-9 to 10-6 M and a low detection limit of 0.36 nM (S/N = 3). Meanwhile, the aptasensor showed prominent selectivity, high stability and acceptable reproducibility in the application of KANA detection. In addition, the aptasensor detection in real samples correlated well with that obtained by liquid chromatograph mass spectrometer (LCMS).

Construction of In2O3/ZnO yolk-shell nanofibers for room-temperature NO2 detection under UV illumination

Room-temperature gas sensors have emerged as effective platforms for sensing explosive or toxic gases in ambient environment. However, room-temperature gas sensor usually suffers from extremely poor sensitivity and sluggish response/recovery characteristics due to the low reacting activity at low temperature. Herein, we present a room-temperature NO₂ sensor with greatly enhanced sensitivity and rapid response/recovery speed under ultraviolet (UV) illumination. The sensor based on In₂O₃/ZnO yolk-shell nanofibers exhibits remarkable sensitivity (R_g/R_a = 6.0) to 1 ppm NO₂ and rapid response/recovery time (≤36, 68 s) under UV illumination, obviously better than negligible sensing performance and inefficient response/recovery properties in dark condition. Such excellent gas sensing properties of the In₂O₃/ZnO yolk-shell nanofibers were not only attributed to the improved photo-generated charge separation efficiency derived from the effect of heterojunction, but also related to the enhanced receptor function towards NO₂ endowed by increased reactive sites and gas adsorption. These proposed strategies will provide a reference for developing high-performance room-temperature gas sensors.

Low-temperature operating ZnO-based NO2 sensors: a review

Owing to its excellent physical and chemical properties, ZnO has been considered to be a promising material for development of NO2 sensors with high sensitivity, and fast response and recovery. However, due to the low activity of ZnO at low temperature, most of the current work is focused on detecting NO2 at high operating temperatures (200-500 °C), which will inevitably increase energy consumption and shorten the lifetime of sensors. In order to overcome these problems and improve the practicality of ZnO-based NO2 sensors, it is necessary to systematically understand the effective strategies and mechanisms of low-temperature NO2 detection of ZnO sensors. This paper reviews the latest research progress of low-temperature ZnO nanomaterial-based NO2 gas sensors. Several efficient strategies to achieve low-temperature NO2 detection (such as morphology modification, noble metal decoration, additive doping, heterostructure sensitization, two-dimensional material composites, and light activation) and corresponding sensing mechanisms (such as depletion layer theory, grain boundary barrier theory, spill-over effects) are also introduced. Finally, the challenges and future development directions of low-temperature ZnO-based NO2 sensors are outlined.