Embedding dual fluoroprobe in metal-organic frameworks for continuous visual recognition of Pb2+ and PO43- via fluorescence 'turn-off-on' response: Agar test paper and fingerprint

A portable smartphone-assisted Tb-MOF-based agar-slice probe for the rapid and on-site fluorescence assay of malachite green in aquatic products

In this study, a new Tb-MOF fluorescence probe was developed for the detection of malachite green (MG) in real aquatic products. Fluorescence sensing experiments revealed that MG can effectively quench the green fluorescence of Tb-MOF suspensions, and the detection process exhibits the advantages of high sensitivity, a wide linear range (0-80 μM), a low detection limit (10.8 nM) and a rapid response time. Selective detection of MG is achieved primarily through fluorescence resonance energy transfer (FRET) and photoinduced electron transfer (PET) mechanisms. Furthermore, a smartphone-assisted Tb-MOF-based agar slice detection platform was constructed for the visual and quantitative detection of MG. Additionally, the on-site detection of MG in crucian and shrimp samples was accomplished with high recoveries (99.8 %-107.99 %) and low relative standard deviations (RSD < 2.2 %). This developed detection platform introduced a low-cost, portable and user-friendly approach for MG detection.

Design and application of dual-emission metal-organic framework-based ratiometric fluorescence sensors

Metal-organic frameworks (MOFs) are novel inorganic-organic hybridized crystals with a wide range of applications. In the last twenty years, fluorescence sensing based on MOFs has attracted much attention. MOFs can exhibit luminescence from metal nodes, ligands or introduced guests, which provides an excellent fluorescence response in sensing. However, single-signal emitting MOFs are susceptible to interference from concentration, environment, and excitation intensity, resulting in poor accuracy. To overcome the shortcomings, dual-emission MOF-based ratiometric fluorescence sensors have been proposed and rapidly developed. In this review, we first introduce the luminescence mechanisms, synthetic methods, and detection mechanisms of dual-emission MOFs, highlight the strategies for constructing ratiometric fluorescence sensors based on dual-emission MOFs, and classify them into three categories: intrinsic dual-emission and single-emission MOFs with luminescent guests, and non-emission MOFs with other luminescent materials. Then, we summarize the recent advances in dual-emission MOF-based ratiometric fluorescence sensors in various analytical industries. Finally, we discuss the current challenges and prospects for the future development of these sensors.

Introducing a Pyrazinoquinoxaline Derivative into a Metal-Organic Framework: Achieving Fluorescence-Enhanced Detection for Cs+ and Enhancing Photocatalytic Activity

Conventional photoresponsive materials have low photon utilization due to irregular distribution of photoactive groups, which severely limits the related real applications. Metal-organic frameworks (MOFs) can modulate the regular arrangement of functional groups to improve the electron transport paths and enhance the photon utilization, which provides strong support for the development of photoactive materials with excellent performance. In this work, one effective strategy for constructing a photoactive MOF had been developed via the utilization of Cd2+ and pyrazinoquinoxaline tetracarboxylic acid. The structural advantages of the Cd-MOF, such as a porous structure, abundant subject-object interaction sites, and a stable framework, ensure the prerequisite for various applications, while the better synergistic effect of Cd3 clusters and the pyrazinoquinoxaline derivative ensures efficient electron transfer efficiency. Therefore, by virtue of these structural advantages, the Cd-MOF can achieve fluorescence quenching detection for a variety of substrates, such as Fe3+, Cr2O72-, MnO4-, nitrofuran antibiotics, and TNP explosives, while fluorescence enhancement detection can be achieved for halogen ions, Cs+, Pb2+, and NO2-. In addition, the Cd-MOF can be used as a photocatalyst to successfully achieve the photocatalytic conversion of benzylamine to N-benzylbenzimidate under mild conditions. Thus, the Cd-MOF as a whole shows the possibility of application as a diverse fluorescence detection and photocatalyst and also illustrates the feasibility of preparing high-performance photoactive materials using the pyrazinoquinoxaline derivative.

A Novel Ion Species- and Ion Concentration-Dependent Anti-Counterfeiting Based on Ratiometric Fluorescence Sensing of CDs@MOF-Nanofibrous Films

Traditional fluorescent anti-counterfeiting labels based on "on-off" fluorescence can be easily cloned. It is important to explore advanced anti-counterfeiting fluorescent labels with high-level security. Here, a pioneering ion species- and ion concentration-dependent anti-counterfeiting technique is developed. By successive loading Cu2+ -sensitive yellow emitted carbon dots (Y-CDs) and Cu2+ non-sensitive blue emitted carbon dots (B-CDs) into metal-organic frameworks (MOFs) and followed by electrospinning, the B&Y-CDs@MOF-nanofibrous films are prepared. The results show that the use of MOF not only avoids the fluorescence quenching of CDs but also improves the fluorescence stability. The fluorescence Cu2+ -sensitivity of the CDs@MOF-nanofibrous films can be regulated by polymer coating or lamination. The fluorescent label consisting of different Cu2+ -sensitivity films will show Cu2+ concentration-dependent decryption information. Only at a specific ion species and concentration (Cu2+ solution of 40-90 µm), the true information can be read out. Less or more concentration (<40 or >90 µm) will lead to false information. The identification of the real information depends on both the species and the concentration. After Cu2+ treatment, the fluorescence of the label can be recovered by ethylenediaminetetraacetic acid disodium (EDTA-2Na) for further recycling. This work will open up a new door for designing high-level fluorescent anti-counterfeiting labels.

A wearable gloved sensor based on fluorescent Ag nanoparticles and europium complexes for visualized assessment of tetracycline in food samples

The abuse of tetracycline antibiotics leads to accumulating residues in the human body, seriously affecting human health. Establishing a sensitive, efficient, and reliable method for qualitative and quantitative detection of tetracycline (TC) is necessary. This study integrated silver nanoclusters and europium-based materials into the same nano-detection system to construct a visual and rapid TC sensor with rich fluorescence color changes. The nanosensor has the advantages of a low detection limit (10.5 nM), high detection sensitivity, fast response, and wide linear range (0-30 μM), which can meet the analysis requirements of different types of food samples. In addition, portable devices based on paper and gloves were designed. Through the smartphone's chromaticity acquisition and calculation analysis application (APP), the real-time rapid visual intelligent analysis of TC in the sample can be realized, which guides the intelligent application of multicolor fluorescent nanosensors.

Luminescent Guests Encapsulated in Metal-Organic Frameworks for Portable Fluorescence Sensor and Visual Detection Applications: A Review

Metal-organic frameworks (MOFs) have excellent applicability in several fields and have significant structural advantages, due to their open pore structure, high porosity, large specific surface area, and easily modifiable and functionalized porous surface. In addition, a variety of luminescent guest (LG) species can be encapsulated in the pores of MOFs, giving MOFs a broader luminescent capability. The applications of a variety of LG@MOF sensors, constructed by doping MOFs with LGs such as lanthanide ions, carbon quantum dots, luminescent complexes, organic dyes, and metal nanoclusters, for fluorescence detection of various target analyses such as ions, biomarkers, pesticides, and preservatives are systematically introduced in this review. The development of these sensors for portable visual fluorescence sensing applications is then covered. Finally, the challenges that these sectors currently face, as well as the potential for future growth, are briefly discussed.

Semiconductor/Carbon Quantum Dot-based Hue Recognition Strategy for Point of Need Testing: A Review

The requirement to establish novel methods for visual detection is attracting attention in many application fields of analytical chemistry, such as, healthcare, environment, agriculture, and food. The research around subjects like "point-of-need", "hue recognition", "paper-based sensor", "fluorescent sensor", etc. has been always aimed at the opportunity to manufacture convenient and fast-response devices to be used by non-specialists. It is possible to achieve economic rationality and technical simplicity for optical sensing toward target analytes through introduction of fluorescent semiconductor/carbon quantum dot (QD) and paper-based substrates. In this Review, the mechanisms of anthropic visual recognition and fluorescent visual assays, characteristics of semiconductor/carbon QDs and ratiometric fluorescence test paper, and strategies of semiconductor/carbon QD-based hue recognition are described. We cover latest progress in the development and application of point-of-need sensors for visual detection, which is based on a semiconductor/carbon quantum dot-based hue recognition strategy generated by ratiometric fluorescence technology.

Capsulation of red emission chromophore into the CoZn ZIF as nanozymes for on-site visual cascade detection of phosphate ions, o-phenylenediamine, and benzaldehyde

Accurate on-site profiling of the pollutants is of vital significance for estimating environmental pollution. Herein, we propose a paper-based fluorescence-sensing system to precisely report the level of multiple pollutants. A high-performance fluorescence-sensor for apparatus-free and visual on-site tandem precisely reporting phosphate ions (Pi), o-phenylenediamine (OPD), and benzaldehyde (BA) levels have been fabricated successfully by introducing synthesized red emission (>600 nm) fluorescent chromophore 10-(diethylamino)-3-hydroxy-5,6-dihydrobenzo [c]xanthen-12-ium (HTD) into the environment of CoZn zeolitic imidazolate framework (CoZn ZIF) by a simple stirring method. CoZn ZIF@HTD with the bimetallic nodes not merely provided main Zn²⁺ sites for specific recognition of Pi to generate an enhanced red fluorescent optical signal, Co³⁺/Co²⁺ exhibited excellent peroxidase-like activity for the catalytic oxidation of OPD substrate in the presence of H₂O₂ resulting in color changing from red to yellow. Subsequently, the obvious yellow fading of the OPDox species took place with the addition of BA. By virtue of the sensitively visual tandem detection of Pi, OPD, and BA, the sensor can be applied to real wastewater samples. Meanwhile, this fluorescent sensor was further adopted for practical application in confocal cell imaging and security inks. Overall, this work established a fluorescent sensing system with integrated multifunctional applications for environmental and biological samples, implying the great potential for simultaneous real-time cascade detection of various important pollutants with the merit of low-cost, time-saving, and easy-to-use.

A facile COF loaded-molybdate resonance Rayleigh scattering and fluorescence dimode probe for determination of trace PO43

A new covalent organic framework loaded-molybdate (COF_Mo) nanomaterial was prepared simply by solvothermal procedure and characterized by electron microscopy and molecular spectral techniques. The COF_Mo had a strong resonance Rayleigh scattering (RRS) signal at 465 nm and a fluorescence peak at 345 nm. When the PO₄^3- was added in the system, it reacted with the molybdate, which loaded on the surface of COF particles, to form stable phosphomolybdic acid occurring RRS/fluorescence-energy transfer, the RRS and fluorescence signals were decreased. The decreased RRS/fluorescence intensities were linear to the PO₄^3- concentration in the range of 0.053-3.2 nmol/L and 0.10-3.2 nmol/L, with a detection limit of 0.050 nmol/L and 0.090 nmol/L respectively. Accordingly, a new and facile RRS/fluorescence dimode method for detection of trace PO₄^3- was established, only one fluorometer was used.

Platform Formed from ZIF-8 and DNAzyme: "Turn-On" Fluorescence Assay for Simple, High-Sensitivity, and High-Selectivity Detection of Pb2

Lead contamination has posed a potential threat to the environment and food safety, arousing extensive concern. In this work, we fabricated a novel fluorescent sensing platform based on zeolitic imidazolate framework-8 (ZIF-8) and DNAzyme for monitoring Pb²⁺ in water and fish samples. ZIF-8 was proposed as a fluorescence quencher with the advantages of simple synthesis, low cost, and high quenching efficiency. The Pb²⁺-dependent GR5 DNAzyme containing the large ssDNA loop can be adsorbed onto ZIF-8 accompanied by fluorescence quenching. Upon binding with Pb²⁺, GR5 DNAzyme was activated and cleaved, leading to the release of FAM-labeled 5-base ssDNA, which restored the fluorescence. The "turn-on" assay can detect Pb²⁺ through the one-pot procedure in the range of 0.01-10.0 nM with a detection limit of 7.1 pM. The platform is promising for on-site monitoring of Pb²⁺ owing to the excellent performance of high sensitivity, low background, strong anti-interference ability, and simple operation.

Intelligent multicolor nano-sensor based on nontoxic dual fluoroprobe and MOFs for colorful consecutive detection of Hg2+ and cysteine

Ultrasensitive detection of Hg²⁺ in aquatic ecosystems is of great significance due to its high toxicity and ubiquity in water. Herein, using a one-step in-situ synthesis method, blue fluorescent carbon dots (CDs), red fluorescent InP/ZnS quantum dots (InPQDs), and MOFs (ZIF-8) integrated multicolor nano-sensor CDs/InPQDs@ZIF-8 was constructed for consecutive visual detection of Hg²⁺ and Cys. The InPQDs can act as the response unit for Hg²⁺ and Cys, with the limit of detection (LOD) of 8.68 and 37.96 nM, respectively. Significantly, the low detection limit combines with good specificity and accuracy of the nano-sensor meet the requirement for the safety monitoring and control of Hg²⁺ in drinking and environmental water. Moreover, the color recognition and processing software installed on smart phone can realize the real-time and rapid sensing of Hg²⁺ and Cys. A logic gate circuit was also devised, providing the possibilities for the application of the nano-sensor in the field of intelligent devices. As far as we know, this was the first example to apply InPQDs to the continuous multicolor visual detection of Hg²⁺ and Cys, which provided reference for the construction of environmentally-friendly dual emission fluorescent sensors for hazardous substance monitoring.

Dual-emitting metal-organic frameworks for ratiometric fluorescence detection of fluoride and Al3+ in sequence

Fluoride (F^-) and Al³⁺ are two common ions existing in drinking water and natural water bodies. Excessive intake of F^- can lead to serious health issues such as fluorosis and bone diseases while accumulated consumption of Al³⁺ may cause neurotoxicity-based diseases. Developing a fast, reliable, and sensitive sensor for visually detecting both F^- and Al³⁺ is of great significance. In the present work, a ratiometric fluorescence sensor was constructed by incorporating rhodamine B (RhB) in situ into a zirconium-based metal-organic framework, UiO-66-NH₂. The obtained nanocomposite UiO-66-NH₂@RhB exhibited similar octahedral structure to UiO-66-NH₂ with high BET surface area, and showed two emission peaks at 450 nm and 585 nm. The blue fluorescence from UiO-66-NH₂ was enhanced by the addition of F^- while subsequent Al³⁺ addition diminished the increased fluorescence intensity, and the red emission from RhB as the reference remained unchangeable to improve the detection precision. Under optimal conditions, detection of limits as low as 1.55 μM for F^- and 0.54 μM for Al³⁺ in aqueous solution were achieved with good selectivity. High recoveries in drinking water samples were also acquired, showing potential applications of this ratiometric fluorescence sensor for practical evaluation of F^- and Al³⁺.

Optical chemosensors for environmental monitoring of toxic metals related to Alzheimer's disease

Alzheimer's disease (AD) is the most common type of dementia and progresses from mild memory loss to severe decline in thinking, behavioral and social skills, which dramatically impairs a person's ability to function independently. Genetics, some health disorders and lifestyle have all been connected to AD. Also, environmental factors are reported as contributors to this illness. The presence of heavy metals in air, water, food, soil and commercial products has increased tremendously. Accumulation of heavy metals in the body leads to serious malfunctioning of bodily organs, specifically the brain. For AD, a wide range of heavy metals have been reported to contribute to its onset and progression and the manifestation of its hallmarks. In this review, we focus on detection of highly toxic heavy metals such as mercury, cadmium, lead and arsenic in water. The presence of heavy metals in water is very troubling and regular monitoring is warranted. Optical chemosensors were designed and fabricated for determination of ultra-trace quantities of heavy metals in water. They have shown advantages when compared to other sensors, such as selectivity, low-detection limit, fast response time, and wide-range determination under optimal sensing conditions. Therefore, implementing optical chemosensors for monitoring levels of toxic metals in water represents an important contribution in fighting AD.

This review briefly summarizes evidence that links toxic metals to onset and progression of Alzheimer's disease. It discusses the structure and fabrication of optical chemosensors, and their use for monitoring toxic metals in water.

Target-receptive structural switching of ssDNA as selective and sensitive biosensor for subsequent detection of toxic Pb2+ and organophosphorus pesticide

A structural switching in Single-stranded DNA (ssDNA) fluorescence biosensor for quick turn-on/off detection of Pb²⁺ ions and pesticide was reported. The design strategy of Hex-labelled ssDNA consists of two types of aptamer probe, G-rich base pair sequence forms G-quadruplex confirmation with Pb²⁺ ions. While other part of base pair sequence exhibits affinity to fold isocarbophos pesticide. MoS₂ nanosheets were identified as quick quencher of Hex fluorescence intensity via Vander-Waals interaction and its significance was compared with other nanomaterials. This sensing mechanism proposes a specific affinity of GA-rich ssDNA with Pb²⁺ to form G-quadruplex via G-Pb²⁺-G sequences. Consequently, ssDNA relived from MoS₂ nanosheets to restore the fluorescence intensity (turn-on). Subsequent addition of pesticide shows stronger affinity towards unfolded aptamer probe to form a random coil like structure. This causes Hex-labelled 5' end closer to the G-quadruplex connected at the 3' end of ssDNA resulting in a remarkable fluorescence quenching (turn-off) owing to PET process. Moreover, the sensing probe (Hex-labelled GA-rich ssDNA) was recycled by introducing acetylcholinesterase enzyme and thiocoline into the reaction mixture. The detection limits of Pb²⁺ and isocarbophos pesticide was estimated to be 0.6 nM and 0.018 μg/L respectively. Moreover, this study reveals a high sensitivity and selectivity towards target molecules in environmental samples.

The selective deprotonation of carbon quantum dots for fluorescence detection of phosphate and visualization of latent fingerprints

We developed a water-soluble, stable and selective "turn-on" fluorescence sensing platform based on carbon quantum dots (CQDs) for rapid determination of phosphate (Pi) in aqueous solutions and for visualization of latent fingerprints on paper. The hydroxyl groups on the surface of the synthesized CQDs can be deprotonated by Pi to trigger the intramolecular charge transfer (ICT) process and the inhibition of excited-state proton transfer (ESPT), achieving a turn-on emission response. CQDs demonstrated the capability to selectively detect Pi over other common ions and biomolecules with the linear fluorescence intensity change in the range from 0 to 100 μM. Moreover, the paper sprayed with the CQD solution showed a remarkable blue emission speckle and a fingerprint upon addition of Pi solution and finger touching, respectively. Notably, the fingerprint images including level 3 details (crossover, bifurcation, termination, and island and sweat pores) are also clearly identified and distinguished, indicating their potential application in document security. We believe that the as-synthesized CQDs will provide a new tool for Pi detection in aqueous media and paper document security.

Designed Eu3+ functionalized Zr-MOF-808 probe for highly sensitive monitoring multiple dyes

Dyes detection remains a serious task because of their high toxicity. In present work, designed Eu³⁺ functionalized Zr-metal-organic framework (Eu³⁺@Zr-MOF-808) as fluorescent probe was constructed via post-synthetic modification (PSM) for rapid monitoring four most commonly used dyes (malachite green (MG), brilliant green (BG), alizarin red S (ARS), indigo red (IDR)). Systematic exploring on the sensing mechanism reveals that fluorescence resonance energy transfer (FRET) for BG, MG and IDR and inner filter effect (IFE) for ARS contribute to the realization of the fluorescence quenching process. It exhibits excellent sensing performances with low limit of detection (LOD) of 32, 58, 77 and 133 nM for BG, IDR, MG and ARS, respectively. The as-constructed Eu³⁺@Zr-MOF-808 was demonstrated to be a highly sensitive probe for screening of MG in fish pond and IDR in printing wastewater with satisfying results. Moreover, a portable test reagent bottle has been developed for visual on-site screening of sample containing dyes with naked eyes under UV light. This is the first attempt to construct the Eu³⁺@Zr-MOF-808 probe for sensingmultiple dyes in real samples and demonstrates promising applications in water quality monitoring.

Ingenious dual-emitting Ru@UiO-66-NH2 composite as ratiometric fluorescence sensor for detection of mercury in aqueous

The increasing deterioration of ecosystem derived from heavy metals residues brings about the environmental and food contamination, which presses the exploration of facile platform for monitoring heavy metals. Herein, a ratiometric fluorescence sensor was designed for Hg²⁺ detection based on the compound of UiO-66-NH₂ and Ru(bpy)₃²⁺ (Ru@UiO-66-NH₂) which was synthesized by situ encapsulation. The innovative composite displayed two emission peaks at 437 and 604 nm, and the addition of Hg²⁺ could only quench the blue fluorescence due to static quenching and photo-induced electron transfer mechanism, providing an internal standard to promote the precision. Under optimal conditions, the ratiometric Ru@UiO-66-NH₂ probe revealed outstanding anti-interference capability and performed with a great limit of detection (LOD) of 0.053 μM for Hg²⁺, which was 2-fold lower than that of single-color UiO-66-NH₂. By merit of Ru@UiO-66-NH₂, test hydrogels were fabricated to provide a tactics for visual, rapid and on-site detection of Hg²⁺. Additionally, the dual-emitting sensing platform presented satisfactory recoveries and reliabilities in lake water, tap water, and drink water, demonstrating the application potential of this proposed ratiometric fluorescence sensor for monitoring Hg²⁺.

Lysosome targeting metal-organic framework probe LysFP@ZIF-8 for highly sensitive quantification of carboxylesterase 1 and organophosphates in living cells

Herein, a lysosomal targeting LysFP@ZIF-8 metal-organic framework (MOF) was fabricated using fluorescent protein chromophore-based probe (LysFP) for selectively detection of carboxylesterase 1 (CES1) in living cells. Unlike the regular small molecule fluorescent probes, LysFP@ZIF-8 showed wide range pH tolerabiligy, high selectivity and sensitivity to CES1 in bio-samples, and was successfully applied to achieve the visual monitoring of CES1 activity in living cells. Low detection limit and high fluorescence quantum yield was calculated as 79 ng/mL and 0.76 for LysFP@ZIF-8, respectively. Furthermore, LysFP@ZIF-8 can also serve as a fluorescence indicator of organophosphates pesticide exposure in the way of hydrolyzing the carboxylic acid ester group in LysFP. This type of probe can inspire the development of fluorescent tools for further explore many pathological processes.

Recent progresses in luminescent metal-organic frameworks (LMOFs) as sensors for the detection of anions and cations in aqueous solution

The discharge of excessive metal ions and anions into water bodies leads to the serious pollution of water and environment, which in turn has a certain impact on industry, agriculture, and human life. Because of the unique advantages of luminescent metal-organic frameworks (LMOFs), they have been successfully explored as various fluorescent probes to quickly and effectively detect these pollutants. This perspective not only introduces the design strategy and classification of LMOFs, especially the construction methods of water-stable LMOFs, but also reports the latest progresses in some LMOFs between 2016 and 2020 as well as expounds the mechanisms of LMOFs for detecting anions and cations. Moreover, the luminescence properties of LMOFs are related to the selection of metal ions, the structure of organic ligands, the pore size, and the interaction of guest molecules. Finally, the further development of LMOFs is summarized and prospected in this field.

Visual detection of trace lead(II) using a forward osmosis-driven device loaded with ion-responsive nanogels

A simple and portable thermometer-type device based on forward osmosis-driven liquid column rising is developed for visual detection of trace Pb²⁺. The device consists of a top indicator tube, a chamber loaded with Pb²⁺-responsive poly(N-isopropylacrylamide-co-benzo-18-crown-6-acrylamide) (PNB) smart nanogels and a bottom semipermeable membrane. Upon the recognition of Pb²⁺, PNB smart nanogels undergo a Pb²⁺-induced hydrophobic to hydrophilic transition, which simultaneously causes the increase of osmotic pressure inside the device. Driven by this osmotic pressure difference, more Pb²⁺ solution flows into the device, causing the rise of the liquid column in the indicator tube, which can be directly observed by naked eyes. The relationship between the change of liquid column height and the Pb²⁺ concentration is investigated for the quantitative detection of Pb²⁺. With the proposed forward osmosis-driven device, trace Pb²⁺ as low as 10^-10 M in aqueous solutions can be detected. This method provides a novel and simple strategy for the visual detection of trace Pb²⁺.

AIE-based fluorescent sensors for low concentration toxic ion detection in water

Ions, including anions and heavy metals, are extremely toxic and easily accumulate in the human body, threatening the health of humans and even causing human death at low concentrations. It is therefore necessary to detect these toxic ions in low concentrations in water. Fluorescent sensing is a good method for detecting these ions, but some conventional dyes often exhibit an aggregation caused quench (ACQ) effect in their solid state, limiting their large-scale application. Fluorescent probes based on aggregation-induced emission (AIE) properties have received significant attention due to their high fluorescence quantum yields in their nano aggragated states, easy fabrication, use of moderate conditions, and selevtive recognization of organic/inorganic compounds in water with obvious changes in fluorescence. We surmarize the recent advances of AIE-based sensors for low concentration toxic ion detection in water. The detection probes can be divided into three categories: chemical reaction types, chemical interaction types and physical interaction types. Chemical reaction types utilize nucleophilic addition and coordination reaction, while chemical interaction types rely on hydrogen bonding and anion-π interactions. The physical interaction types are composed of electrostatic attractions. We finally comment on the challenges and outlook of AIE-active sensors.

Two-dimensional black phosphorus nanoflakes: A coreactant-free electrochemiluminescence luminophors for selective Pb2+ detection based on resonance energy transfer

As a nondegradable environmental pollutant, lead ion (Pb²⁺) has been proven to be deleterious for environmental and health. Conveniently, quickly and accurately on-site detection of Pb²⁺ is of paramount importance. Herein, an electrochemiluminescence (ECL) assay protocol using two-dimensional black phosphorus (2D BP) nanoflakes as new ECL emitter for highly sensitive and selective trace Pb²⁺ was designed on the basis of Pb²⁺ induced ECL resonance energy transfer (ECL-RET) between 2D BP nanoflakes and Ag/AgCl nanocubes. Anodic green ECL emission of BP nanoflakes without any coreactants was achieved. It is noteworthy that the possible ECL mechanism and the influence of coreactants on the ECL behaviour of BP nanoflakes were further investigated. Benefitting from the well match between the ECL emission spectrum of BP nanoflakes (∼510 nm) and the absorption spectrum of Ag/AgCl nanocubes (200-300 nm and 400-700 nm), effective energy transfer yielded. The introduction of Pb²⁺ would lead to the detachment of Ag/AgCl nanocubes then result in an enhanced ECL emission. Based on this, the proposed method could accurately quantify the Pb²⁺ in the range from 0.5 pM to 5 nM, which exhibited comparative performance to previous work. Furthermore, this study presents the example of employing 2D BP nanoflakes as ECL emitters and constructing a coreactant-free ECL sensing platform, which might open up a promising route for the potential design and implement in clinical analysis.