Amine functionalized egg albumin hydrogel with enhanced adsorption potential for diclofenac sodium in water

Hierarchical electrodes with superior cycling performance using porous material based on cellulose nanofiber as flexible substrate

The development and application of flexible electrodes with extended cycle life have long been a focal point in the field of energy research. In this study, positively charged polyethylene imine (PEI) and conductive polymer poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) with negative charge were alternately deposited onto a cellulose nanofiber (CNF) porous material utilizing pressure gradient-assisted layer-by-layer (LbL) self-assembly technology. The flexible substrate, characterized by a three-dimensional porous structure reinforced with stiff CNF, not only facilitated high charge storage but also enhanced the electrode's cycling life by reducing the volume changes of PEDOT:PSS. Furthermore, the exceptional wettability of PEI by the electrolyte could promote efficient charge transport within the electrode. The electrode with 10 PEI/PEDOT:PSS bilayer exhibits a capacitance of 63.71 F g-1 at the scan rate of 5 mV s-1 and a remarkable capacitance retention of 128 % after 3000 charge-discharge cycles. The investigation into the nanoscale layers of the LbL multilayer structure indicated that the exceptional cyclic performance was primarily attributed to the spatial constraints imposed by the rigid porous substrate layered structure on the deformation of PEDOT:PSS. This work is expected to make a significant contribution to the development of electrodes with high charge storage capacity and ultra-long cycling life.

Porous sodium alginate/cellulose nanofiber composite hydrogel microspheres for heavy metal removal in wastewater

High adsorption capacity, high adsorption rate and reusable adsorbents are urgent needed for removing heavy metals from wastewater. In this study, porous sodium alginate/cellulose nanofiber (SA/CNF) composite hydrogel microspheres were prepared by combining sodium alginate with cellulose nanofibers by microfluidics technology and adding polyethylene glycol (PEG) as pore making agent. The SA/CNF composite hydrogel microspheres could efficiently adsorb heavy metals (Pb2+, Cu2+ and Cd2+) in wastewater. The influencing factors of adsorption process, including pH, temperature, initial concentration, coexisting ions and aquatic environments, were systematically discussed. The adsorption process was more consistent with Langmuir isotherm model and pseudo-second-order model in batch system, indicating the adsorption process was mainly chemical adsorption. The adsorption capacity to Pb2+ obtained by Langmuir model was as high as 544.66 mg/g at 20 °C. Fixed-bed column adsorption experiments demonstrated the excellent performance of the as-prepared SA/CNF microspheres for treatment of the flowing wastewater in a column system. Overall, a highly practical adsorption process based on hydrogel adsorbents was developed for the removal of heavy metals from actual wastewater.

Preparation of silver-based metal-organic framework and chitosan hybrid material for removing drug and dye

Pharmaceuticals and personal care products and dyes have low biodegradability and high toxicity, seriously threaten the human health and ecological environment. Therefore, seeking effective removal methods has become the focus of research. In this study, silver-based metal-organic framework (Ag-MOF) and chitosan (CS) hybrid adsorbent (Ag-MOF-CS) was synthesized via solvothermal one-pot synthesis to remove diclofenac sodium (DCF) and acid Red 1 (AR1) from water for the first time. The morphology and structure of Ag-MOF-CS were confirmed by various characterizations. The effect on adsorption was investigated by changing the adsorbent dosage, pH and other conditions. The adsorption kinetics, adsorption isotherms and thermodynamics were analyzed. Ag-MOF-CS showed a high adsorption capacity. And the maximum adsorption capacity of Ag-MOF-CS for DCF and AR1 was 351.75 mg/g and 678.83 mg/g, respectively. The adsorbent bound to DCF and AR1 may via electrostatic forces, π-π interactions, hydrogen bonding. Even after four cycles of Ag-MOF-CS, the DCF removal can still be higher than 80 %. The eco-friendly Ag-MOF-CS demonstrated significant potential for utilization in treating wastewater.

Magnetic iron-based waterworks sludge modified by chitosan and FeS for aqueous Cr(vi) adsorption and reduction

Heavy metals have been considered an evolving environmental concern due to their harmful and long-lasting impacts. We synthesized a composite of FeS/CS@MIBWS for aqueous Cr(vi) adsorption and reduction utilizing the iron-based waterworks sludge modified by chitosan and FeS. After determining the optimal conditions for the FeS/CS@MIBWS preparation, its Cr(vi) removal capability was evaluated using material characterisation and static Cr(vi) adsorption assays. Cr(vi) elimination by the composite was a pH-dependent process, with pH 2 being the optimum in the range of 2-10. The adsorption process was befitted a pseudo-second-order model, and the equilibrium results agreed well with the Langmuir model. The thermodynamics investigation showed that Cr(vi) removal by the composite has both spontaneous and endothermic nature. Considering the ionic effects, Cl-, SO4 2- and PO4 3- decreased Cr(vi) elimination in the sequence of Cl- < SO4 2- < PO4 3-. The key mechanisms for Cr(vi) elimination were physical and chemical adsorption, chelation, and Cr(vi) reduction into Cr(iii). Furthermore, FeS/CS@MIBWS demonstrated steady reusability (removal effectiveness of 70% after 5 cycles). FeS/CS@MIBWS's rapid, high-performance, reusable, and easily separable adsorption properties make it a promising choice for heavy metal environmental cleaning.

Optimized design of quaternary amino-functionalized chitosan fibers for ultra-high diclofenac adsorption from wastewater

The extraction of non-steroidal anti-inflammatory drugs (NSAIDs) from water bodies is imperative due to the potential harm to humans and the ecosystem caused by NSAID-contaminated water. Quaternary amino-functionalized epichlorohydrin cross-linked chitosan fibers (QECFs), an economical and eco-friendly adsorbent, were successfully prepared using a simple and gentle method for efficient diclofenac (DCF) adsorption. Additionally, the optimized factors for the preparation of QECFs included epichlorohydrin concentration, pH, temperature, and (3-chloro-2-hydroxypropyl) trimethylammonium chloride (CHTAC) concentration. QECFs demonstrated excellent adsorption performance for DCF across a broad pH range of 7-12. The calculated maximum adsorption capacity and the amount of adsorbed DCF per adsorption site were determined to be 987.5 ± 20.1 mg/g and 1.2 ± 0.2, respectively, according to the D-R and Hill isotherm models, at pH 7 within 180 min. This performance surpassed that of previously reported adsorbents. The regeneration of QECFs could be achieved using a 0.5 mol/L NaOH solution within 90 min, with QECFs retaining their original fiber form and experiencing only a 9.18% reduction in adsorption capacity after 5 cycles. The Fourier transform infrared spectrometer and X-ray photoelectron spectroscopy were used to study the characterization of QECFs, the preparation mechanism of QECFs, and the adsorption mechanism of DCF by QECFs. Quaternary ammonium groups (R4N+) were well developed in QECFs through the reaction between amino/hydroxyl groups on chitosan and CHTAC, and approximately 0.98 CHTAC molecule with 0.98 R4N+ group were immobilized on each chitosan monomer. Additionally, these R4N+ on QECFs played a crucial role in the removal of DCF.

Strongly plasticized gelatin-based hydrogel for flexible encapsulation of complex-shaped electronic devices

The growth of environmentally sensitive complex-shaped electronic devices (ECEDs) has led to a surging demand for flexible electromagnetic wave (EMW) absorbers. Herein, the water loss property of hydrogel was ingeniously applied for the flexible encapsulation (FE) of ECEDs. To be specific, saturated state (SGT) hydrogels were prepared by chemical cross-linking, and the hydrogen bond dissipation network promoted FE. Additionally, SGT has an effective absorption bandwidth (EAB) of 6.04 GHz at 1.65 mm due to the presence of dipole polarization. With the loss of water, SGT transitions to its natural state (NGT), and the decreasing conductivity leads to better impedance matching. NGT exhibited a broader EAB (9.20 GHz at 2.65 mm) and also strength and lightness (density of 0.3 g cm-3). Furthermore, the semi-automatic reversible cyclic transformation between SGT and NGT gels further broadens application scenarios. GT gel combines self-encapsulation and self-optimized performance as a potential EMW absorber for FE.

Deep removal of phosphate from electroplating wastewater using novel Fe-MOF loaded chitosan hydrogel beads

Since the electroplating industry is springing up, effective control of phosphate has attracted global concerns. In this study, a novel biosorbent (MIL-88@CS-HDG) was synthesized by loading a kind of Fe-based metal organic framework called MIL-88 into chitosan hydrogel beads and applied in deep treatment of phosphate removal in electroplating wastewater. The adsorption capacities of H2PO4- on MIL-88@CS-HDG could reach 1.1 mmol/g (corresponding to 34.1 mg P/g and 106.7 mg H2PO4-/g), which was 2.65% higher than that on single MOF powders and chitosan hydrogel beads. The H2PO4- adsorption was well described by the Freundlich isotherm model. Over 90% H2PO4- could be adsorbed at contact time of 3 h. It could keep high adsorption capacity in the pH range from 2 to 7, which had a wider pH range of application compared with pure MIL-88. Only NO3- and SO42- limited the adsorption with the reduction rate of 11.42% and 23.23%, proving it tolerated most common co-existing ions. More than 92% of phosphorus could be recovered using NaOH and NaNO3. Electrostatic attraction between Fe core and phosphorus in MIL-88@CS-HDG and ion exchange played the dominant role. The recovered MIL-88@CS-HDG remained stable and applicable in the treatment process of real electroplating wastewater even after six adsorption-regeneration cycles. Based on the removal properties and superb regenerability, MIL-88@CS-HDG is potentially applicable to practical production.

Removal of diclofenac sodium from aqueous solution using different ionic liquids functionalized tragacanth gum hydrogel prepared by radiation technique

Diclofenac sodium (DCF) was reported as an important emerging environmental pollutant and its removal from wastewater is very urgent. In this study, different alkyl substituted ionic liquids (1-alkyl -3-vinyl- imidazolium bromide [CnVIm]Br, n = 4, 6, 8, 10, 12) functionalized tragacanth gum (TG-CnBr) are prepared by radiation induced grafting and crosslinking polymerization. The adsorption behaviors of ionic liquids functionalized tragacanth gum for diclofenac sodium from aqueous solutions are examined. The adsorption capacity of TG-CnBr for diclofenac sodium increases with the increasing of alkyl chain length of the imidazolium cation and the hydrophobicity of the hydrogels. The maximum adsorption capacity by TG-C12Br for diclofenac sodium at 30, 40 and 50 °C were 327.87, 310.56 and 283.29 mg/g, respectively. The adsorption of TG-C12Br towards diclofenac sodium was little decreased with NaCl increasing. The removal efficiency was still remained 94.55 % within 5 adsorption-desorption cycles by 1 M HCl. Also, the adsorption mechanism including electrostatic attraction, hydrophobic interaction, hydrogen bonding, and π - π interaction was proposed.

A Carboxyl Group-Functionalized Ionic Liquid Hybrid Adsorbent for Solid-Phase Extraction and Determination of Trace Diclofenac Sodium in Milk Samples

A simple and efficient sample pretreatment technology is very important for the accurate determination of trace drug residues in foods to ensure food safety. Herein, we report a new carboxyl group-functionalized ionic liquid hybrid solid- phase adsorbent (PS-IL-COOH) for the highly efficient extraction and quantitative determination of diclofenac sodium (DS) residue in milk samples. It was found that the adsorption efficiency of PS-IL-COOH for the ppb level of DS was greater than 93.0%, the adsorption capacity was 934.1 mg/g, and the enrichment factor was 620.0, which surpass most of the previously reported values for DS adsorbents. The high concentration of salts did not interfere with the adsorption of DS. Importantly, the recovery of DS was above 90% after 16 adsorption--regeneration cycles. The synergistic effect of the multiple interactions was found to be the main factor for the high efficiency of DS adsorption. The proposed method was applied to the extraction and detection of DS in milk samples, with the relative recovery ranging from 88.2 to 103.0%.

Functionally-designed floatable amino-modified ZnLa layered double hydroxides/cellulose acetate beads for tetracycline removal: Performance and mechanism

The over-reliance on tetracycline antibiotics (TC) in the animal husbandry and medical field has seriously affected the safety of the ecological environment. Therefore, how to effectively treat tetracycline wastewater has always been a long-term global challenge. Here, we developed a novel polyethyleneimine (PEI)/Zn-La layered double hydroxides (LDH)/cellulose acetate (CA) beads with cellular interconnected channels to strengthen the TC removal. The results of the exploration on its adsorption properties illustrated that the adsorption process exhibited a favorable correlation with the Langmuir model and the pseudo-second-order kinetic model, namely monolayer chemisorption. Among the many candidates, the maximum adsorption capacity of TC by 10 %PEI-0.8LDH/CA beads was 316.76 mg/g. Apart from that, the effects of pH, interfering species, actual water matrix and recycling on the adsorption of TC by PEI-LDH/CA beads were also analyzed to verify their superior removal capability. The potential for industrial-scale applications was expanded through fixed-bed column experiments. The proven adsorption mechanisms mainly included electrostatic interaction, complexation, hydrogen bonding, n-π EDA effect and cation-π interaction. The self-floating high-performance PEI-LDH/CA beads exploited in this work provided fundamental support for the practical application of antibiotic-based wastewater treatment.

Superior performance of novel chitosan-based flocculants in decolorization of anionic dyes: Responses of flocculation performance to flocculant molecular structures and hydrophobicity and flocculation mechanism

To achieve economical and efficient decolorization, two novel flocculants, weakly hydrophobic comb-like chitosan-graft-poly (N, N-Dimethylacrylamide) (CSPD) and strongly hydrophobic chain-like chitosan-graft-L-Cyclohexylglycine (CSLC) were synthesized in this study. To assess the effectiveness and application of CSPD and CSLC, the impacts of factors, including flocculant dosages, initial pH, initial dye concentrations, co-existing inorganic ions and turbidities, on the decolorization performance were explored. The results suggested that the optimum decolorizing efficiencies of the five anionic dyes ranged from 83.17% to 99.40%. Moreover, for accurately controlling flocculation performance, the responses to flocculant molecular structures and hydrophobicity in flocculation using CSPD and CSLC were studied. The Comb-like structure gives CSPD a wider dosage range for effective decolorization and better efficiencies with large molecule dyes under weak alkaline conditions. The strong hydrophobicity makes CSLC more effective in decolorization and more suitable for removing small molecule dyes under weak alkaline conditions. Meanwhile, the responses of removal efficiency and floc size to flocculant hydrophobicity are more sensitive. Mechanism studies revealed that charge neutralization, hydrogen bonding and hydrophobic association worked together in the decolorization of CSPD and CSLC. This study has provided meaningful guidance for developing flocculants in the treatment of diverse printing and dyeing wastewater.

Green Synthesis of Hydrogel-Based Adsorbent Material for the Effective Removal of Diclofenac Sodium from Wastewater

The removal of pharmaceutical contaminants from wastewater has gained considerable attention in recent years, particularly in the advancements of hydrogel-based adsorbents as a green solution for their ease of use, ease of modification, biodegradability, non-toxicity, environmental friendliness, and cost-effectiveness. This study focuses on the design of an efficient adsorbent hydrogel based on 1% chitosan, 40% polyethylene glycol 4000 (PEG4000), and 4% xanthan gum (referred to as CPX) for the removal of diclofenac sodium (DCF) from water. The interaction between positively charged chitosan and negatively charged xanthan gum and PEG4000 leads to strengthening of the hydrogel structure. The obtained CPX hydrogel, prepared by a green, simple, easy, low-cost, and ecological method, has a higher viscosity due to the three-dimensional polymer network and mechanical stability. The physical, chemical, rheological, and pharmacotechnical parameters of the synthesized hydrogel were determined. Swelling analysis demonstrated that the new synthetized hydrogel is not pH-dependent. The obtained adsorbent hydrogel reached the adsorption capacity (172.41 mg/g) at the highest adsorbent amount (200 mg) after 350 min. In addition, the adsorption kinetics were calculated using a pseudo first-order model and Langmuir and Freundlich isotherm parameters. The results demonstrate that CPX hydrogel can be used as an efficient option to remove DCF as a pharmaceutical contaminant from wastewater.

Leaf-like ionic covalent organic framework for the highly efficient and selective removal of non-steroidal anti-inflammatory drugs: Adsorption performance and mechanism insights

In recent years, ionic covalent organic frameworks (iCOFs) have become popular for the removal of contaminants from water. Herein, we employed 2-hydroxybenzene-1,3,5-tricarbaldehyde (TFP) and 1,3-diaminoguanidine monohydrochloride (Dg_Cl) to develop a novel leaf-like iCOF (TFP-Dg_Cl) for the highly efficient and selective removal of non-steroidal anti-inflammatory drugs (NSAIDs). The uniformly distributed adsorption sites, suitable pore sizes, and functional groups (hydroxyl groups, guanidinium groups, and aromatic groups) of the TFP-Dg_Cl endowed it with powerful and selective adsorption capacities for NSAIDs. Remarkably, the optimal leaf-like TFP-Dg_Cl demonstrated an excellent maximum adsorption capacity (1100.08 mg/g) for diclofenac sodium (DCF), to the best of our knowledge, the largest adsorption capacity ever achieved for DCF. Further testing under varying environmental conditions such as pH, different types of anions, and multi-component systems confirmed the practical suitability of the TFP-Dg_Cl. Moreover, the prepared TFP-Dg_Cl exhibited exceptional reusability and stability through six adsorption-desorption cycles. Finally, the adsorption mechanisms of NSAIDs on leaf-like TFP-Dg_Cl were confirmed as electrostatic interactions, hydrogen bonding, and π-π interactions. This work significantly supplements to our understanding of iCOFs and provides new insights into the removal of NSAIDs from wastewater.

Super-adsorbent microspheres based on a triallyl isocyanurate-maleic anhydride copolymer for the removal of organic pollutants from water

Owing to the frequent occurrence of diclofenac sodium (DS) in fresh aquatic environments and its potential toxicity towards living organisms, the effective removal of DS has attracted worldwide attention. Herein, a green and efficient strategy to fabricate crosslinked microspheres with interconnected mesoporous structures and abundant adsorption active sites was developed. With this strategy, triallyl isocyanurate (TAIC)-maleic anhydride (MAH) copolymer microspheres (TMs) with a diameter of 1.19-1.35 μm were first prepared by self-stabilized precipitation (2SP) polymerization, and the TMs possess a large amount reactive anhydride groups (62.5-71.8 mol%), a specific surface area of 51.6-182.4 m² g^-1 and a mesoporous structure (average pore size: 3.4-3.8 nm). Then the TMs were further functionalized with polyethylenimine (PEI) to give rise to cationic microspheres (Cat-TMs), which showed excellent adsorption performance to DS with a rapid adsorption rate (reached equilibrium within 30 min), a very high equilibrium adsorption capacity (1421 mg g^-1) and excellent recyclability. The pseudo-second-order model and Langmuir model were a good fit for the adsorption kinetic and isotherm process, respectively. Furthermore, due to the high cation density (4.291 mmol g^-1) and excellent pH buffer capacity of Cat-TMs, the adsorption capacity can be maintained at a high level within the pH range of 6-10. The regenerated Cat-TMs showed only a slight loss (<5%) in the adsorption capacity even after 5 adsorption-desorption cycles. In short, Cat-TMs can be considered as a highly promising adsorbent for the rapid and ultra-efficient removal of anionic organic contaminants and have significant potential to be applied in wastewater treatment.

Performance Evaluation of Gum Gellan-Based Hydrogel as a Novel Adsorbent for the Removal of Cationic Dyes: Linear Regression Models

In this work, the suitability and efficacy of the previously reported biodegradable gellan gum (GG)-based hydrogel have been thoroughly investigated with respect to the adsorption mechanisms of malachite green (MG) and methylene blue (MB) dyes. The dyes' removal from aqueous solutions using GG-cl-poly(AA) as an adsorbent material has been studied in a discontinuous system with respect to contact time, dose, pH, and temperature. The synthesized hydrogel was characterized by FT-IR, TGA, XRD, ¹H NMR, and FE-SEM. The adsorption capacity of GG-cl-poly(AA) hydrogel was investigated at different pH solutions (3, 7, and 10), and it was found that neutralized charge plays a crucial role in the enhancement of dye removal. To better understand the behavior of the GG-cl-poly(AA) hydrogel in adsorbing model dyes, adsorption kinetics, isotherms, and thermodynamics were also investigated. The values of qmax for MG and MB were obtained to be 552.48 and 531.9 mg g^-1. In addition, the influence of NaCl concentration on adsorption efficiency was investigated, and it was found that as the ion concentration increased, the effectiveness of the adsorption process dropped. Moreover, the synthesized hydrogel's potential application in the adsorption and separation of dyes from wastewater is enhanced by the reusability investigations conducted in convenient conditions. As a result, it is possible to conclude that reusing GG-cl-poly(AA) hydrogel as a low-cost, easy-to-handle, nontoxic material in an industrial wastewater treatment plant's adsorption process can provide a number of advantages, including high efficiency for MG and MB removal and cost savings on overall treatment plant operations.

Emerging albumin hydrogels as personalized biomaterials

Developing biomaterials-based tissue engineering scaffolds with personalized features and intrinsic biocompatibility is appealing and urgent. Through utilizing various strategies, albumin, as the most abundant protein in plasma, could be fabricated into sustainable, cost-effective, and potentially personalized hydrogels that would display enormous biological applications. To date, much of the albumin-based research is primarily engrossed in using albumin as a therapeutic molecule or a drug carrier, not much as a scaffold for tissue engineering. For this reason, we have come up with a detailed and insightful review of recent progress in albumin-based hydrogels having an emphasis on production techniques, material characteristics, and biological uses. It is envisioned that albumin-based scaffolds would be appealing and useful platforms to meet current tissue engineering needs and achieve the goal of clinical translation to benefit patients. STATEMENT OF SIGNIFICANCE: The creation of autologous material-based scaffolds is a potential method for preventing immunological reactions and obtaining the best therapeutic results. Patient-derived albumin hydrogels may consequently provide improved opportunities for personalized treatment due to their abundant supply and minimal immunogenicity. To provide a detailed and insightful summary on albumin-based hydrogels, this review includes latest comprehensive information on their preparation procedures, features, and applications in 3D printing and other biomedical applications. The challenges, along with the future potential for implementing albumin-based hydrogels in clinics, have also been addressed.

Research progress on albumin-based hydrogels: Properties, preparation methods, types and its application for antitumor-drug delivery and tissue engineering

Albumin is derived from blood plasma and is the most abundant protein in blood plasma, which has good mechanical properties, biocompatibility and degradability, so albumin is an ideal biomaterial for biomedical applications, and drug-carriers based on albumin can better reduce the cytotoxicity of drug. Currently, there are numerous reviews summarizing the research progress on drug-loaded albumin molecules or nanoparticles. In comparison, the study of albumin-based hydrogels is a relatively small area of research, and few articles have systematically summarized the research progress of albumin-based hydrogels, especially for drug delivery and tissue engineering. Thus, this review summarizes the functional features and preparation methods of albumin-based hydrogels, different types of albumin-based hydrogels and their applications in antitumor drugs, tissue regeneration engineering, etc. Also, potential directions for future research on albumin-based hydrogels are discussed.

Advances in the Removal of Cr(III) from Spent Industrial Effluents-A Review

The review presents advances in the removal of Cr(III) from the industrial effluents published in the last ten years. Although Cr(III) has low solubility and is less dangerous for the aquatic environment than Cr(VI), it cannot be released into the aquatic environment without limitations and its content in water should be restricted. The development of efficient techniques for the removal of Cr(III) is also a response to the problem of chromium wastewater containing Cr(VI) ions. Very often the first step in dealing with such wastewater is the reduction in chromium content. In some cases, removal of Cr(III) from wastewaters is an important step for pretreatment of solutions to prepare them for subsequent recovery of other metals. In the review, hydrometallurgical operations for Cr(III) removal are presented, including examples of Cr(III) recovery from real industrial effluents with precipitation, adsorption, ion exchange, extraction, membrane techniques, microbial-enhanced techniques, electrochemical methods. The advantages and disadvantages of the operations mentioned are also presented. Finally, perspectives for the future in line with circular economy and low-environmental impact are briefly discussed.

A Comprehensive Review of Food Hydrogels: Principles, Formation Mechanisms, Microstructure, and Its Applications

Food hydrogels are effective materials of great interest to scientists because they are safe and beneficial to the environment. Hydrogels are widely used in the food industry due to their three-dimensional crosslinked networks. They have also attracted a considerable amount of attention because they can be used in many different ways in the food industry, for example, as fat replacers, target delivery vehicles, encapsulating agents, etc. Gels-particularly proteins and polysaccharides-have attracted the attention of food scientists due to their excellent biocompatibility, biodegradability, nutritional properties, and edibility. Thus, this review is focused on the nutritional importance, microstructure, mechanical characteristics, and food hydrogel applications of gels. This review also focuses on the structural configuration of hydrogels, which implies future potential applications in the food industry. The findings of this review confirm the application of different plant- and animal-based polysaccharide and protein sources as gelling agents. Gel network structure is improved by incorporating polysaccharides for encapsulation of bioactive compounds. Different hydrogel-based formulations are widely used for the encapsulation of bioactive compounds, food texture perception, risk monitoring, and food packaging applications.

Hydrogel-Based Biosensors

There is an increasing interest in sensing applications for a variety of analytes in aqueous environments, as conventional methods do not work reliably under humid conditions or they require complex equipment with experienced operators. Hydrogel sensors are easy to fabricate, are incredibly sensitive, and have broad dynamic ranges. Experiments on their robustness, reliability, and reusability have indicated the possible long-term applications of these systems in a variety of fields, including disease diagnosis, detection of pharmaceuticals, and in environmental testing. It is possible to produce hydrogels, which, upon sensing a specific analyte, can adsorb it onto their 3D-structure and can therefore be used to remove them from a given environment. High specificity can be obtained by using molecularly imprinted polymers. Typical detection principles involve optical methods including fluorescence and chemiluminescence, and volume changes in colloidal photonic crystals, as well as electrochemical methods. Here, we explore the current research utilizing hydrogel-based sensors in three main areas: (1) biomedical applications, (2) for detecting and quantifying pharmaceuticals of interest, and (3) detecting and quantifying environmental contaminants in aqueous environments.

Probing and Manipulating Noncovalent Interactions in Functional Polymeric Systems

Noncovalent interactions, which usually feature tunable strength, reversibility, and environmental adaptability, have been recognized as driving forces in a variety of biological and chemical processes, contributing to the recognition between molecules, the formation of molecule clusters, and the establishment of complex structures of macromolecules. The marriage of noncovalent interactions and conventional covalent polymers offers the systems novel mechanical, physicochemical, and biological properties, which are highly dependent on the binding mechanisms of the noncovalent interactions that can be illuminated via quantification. This review systematically discusses the nanomechanical characterization of typical noncovalent interactions in polymeric systems, mainly through direct force measurements at microscopic, nanoscopic, and molecular levels, which provide quantitative information (e.g., ranges, strengths, and dynamics) on the binding behaviors. The fundamental understandings of intermolecular and interfacial interactions are then correlated to the macroscopic performances of a series of noncovalently bonded polymers, whose functions (e.g., stimuli-responsiveness, self-healing capacity, universal adhesiveness) can be customized through the manipulation of the noncovalent interactions, providing insights into the rational design of advanced materials with applications in biomedical, energy, environmental, and other engineering fields.

Nanocellulose fine-tuned poly(acrylic acid) hydrogel for enhanced diclofenac removal

Hydrogel was recognized as one of the most promising materials for adsorption of pharmaceuticals and personal care products (PPCPs). The highly efficient bio-based nanocelluloses fine-tuned poly(acrylic acid) hydrogel (PAA/NC) adsorbent was constructed by adjusting aspect ratio, surface charge and crystallinity of NC. The cross-linked networks were fabricated through a single-step free-radical polymerization via steric effect and hydrogen bonds. The uniform three-dimensional structures with abundant macropores and mesopores were in-situ visualized by the cryogenic-scanning electron microscopy (Cryo-SEM). The diclofenac adsorption capacity of TEMPO oxidized cellulose nanofibers (TCNF) incorporated PAA hydrogel (PAA/TCNF, 559.8 mg·g^-1) was circa 2.1 times higher than pristine PAA (293.5 mg·g^-1) due to the elevated specific surface area, favorable spatial structure with unimpeded channels and abundant surface-charged carboxylic groups. Moreover, PAA/NC hydrogel exhibited a wide-pH applicability and high salinity tolerance. The adsorption was predominantly determined by hydrogen bonds, validated by XPS and FT-IR analysis. It was demonstrated developed PAA/NC hydrogel with unique porous structure significantly enhanced adsorption capacity for potential application in the purification of refractory organic pollutants-containing wastewater.

Zirconium(IV) Metal Organic Frameworks with Highly Selective Sorption for Diclofenac under Batch and Continuous Flow Conditions

Diclofenac (DCF) is among the most effective non-steroidal anti-inflammatory drugs (NSAIDs) and at the same time one of the most consumed drugs worldwide. Since the ever-increasing use of diclofenac poses serious threats to ecosystems, its substantial removal is crucial. To address this issue, a variety of sorbents have been employed. Herein we present the diclofenac removal properties of two metal organic frameworks, namely [Zr6O4(OH)4(NH2BDC)6]·xH2O (MOR-1) and H16[Zr6O16(H2PATP)4]·xH2O (MOR-2). Batch studies revealed fast sorption kinetics for removal of DCF− from water as well as particularly high selectivity for the drug vs. common competitive species. Moreover, the composite MOR-1-alginic acid material was utilized in a sorption column, displaying remarkable removal efficiency towards DCF− anions. Significantly, this is the first time that column sorption data for removal of NSAIDs using MOF-based materials is reported.

Fabrication of Polyethyleneimine-Functionalized Magnetic Cellulose Nanocrystals for the Adsorption of Diclofenac Sodium from Aqueous Solutions

Diclofenac sodium (DS), one of the most used non-steroidal anti-inflammatory drugs worldwide, is often detected in wastewater and natural water. This drug is ecotoxic, even at low concentrations. Therefore, it is essential to fabricate low-cost adsorbents that can easily and effectively remove DS from contaminated water bodies. In this study, a polyethyleneimine (PEI)-modified magnetic cellulose nanocrystal (MCNC) was prepared with a silane coupling agent as a bridge. TEM, FTIR, XRD, and VSM were used to demonstrate the successful preparation of MCNC-PEI. This composite adsorbent exhibited efficient DS removal. Furthermore, the adsorption performance of MCNC-PEI on DS was optimal under mildly acidic conditions (pH = 4.5). Adsorption kinetics showed that the adsorption process involves mainly electrostatic interactions. Moreover, the maximum adsorption capacity reached 299.93 mg/g at 25 °C, and the adsorption capacity only decreased by 9.9% after being reused five times. Considering its low cost, low toxicity, and high DS removal capacity, MCNC-PEI could be a promising adsorbent for treating DS-contaminated water.

Synthesis of glutaraldehyde-modified silica/chitosan composites for the removal of water-soluble diclofenac sodium

Composite materials are effective adsorbents for the removal of various types of contaminants, such as pharmaceutical products. However, they require improvement to achieve a good adsorption capacity. This study presents the development of a promising adsorbent: silica/chitosan modified with different proportions of glutaraldehyde, which involves the D-glucosamine units from chitosan. The developed materials were evaluated for their ability to remove diclofenac sodium. The adsorption data showed that the diclofenac adsorption efficiency increased with increasing degree of glutaraldehyde crosslinking. The equilibrium and kinetic data were well fit by the Liu and Elovich models, respectively, and the maximum adsorption capacity was 237.8 mg/g. Therefore, it can be assumed that the process is predominantly chemical and exothermic, with a high affinity between the adsorbents and diclofenac sodium. The adsorption mechanisms were investigated to better understand the interactions, and the predominance of covalent bonds with the self-polymerized glutaraldehyde was verified.

Adsorption of cationic dyes onto carrageenan and itaconic acid-based superabsorbent hydrogel: Synthesis, characterization and isotherm analysis

Polysaccharide-based hydrogels offer a great overlook for environmental applications and help in the elimination of various noxious pollutants from the water system. Novel carrageenan and itaconic acid-based superadsorbent hydrogel having appreciable swelling properties and adsorption capacity towards Methylene blue (MB), Crystal violet (CV), and Methyl Red (MR) was synthesized by suspension polymerization technique. The swelling study showed the dependency upon the temperature in which the swelling rate increased with increasing temperature with a maximum swelling rate of 417% at 318 K. For ascertaining the maximum adsorption capacity, various influential parameters such as contact time, adsorbent dose, dye concentration, and temperature were systematically studied. Maximum adsorption capacity as calculated from the Langmuir isotherm was 2439.02, 1111.11, and 666.68 mg/g for MB, CV, and MR, respectively. Thermodynamic studies revealed the spontaneous nature of the undertaken dye adsorption experiment. Overall, the present study reveals that the synthesized superadsorbent hydrogel can be used as an efficient adsorbent for the removal of dyes from an aqueous solution.

Citrate-modified biochar for simultaneous and efficient plant-available silicon release and copper adsorption: Performance and mechanisms

Silicon (Si) deficiency and heavy metals (HMs) pollution are common for farmland soil because of long-term intensive farming. In this study, a novel citrate-modified biochar (C-BC) was introduced as a soil conditioner to simultaneously increase the amount of plant-available Si (PASi) and immobilize HMs. The maximum amount of PASi released was 33.00 mg⋅g^-1 from C-BC pre-treated with 0.1 mol⋅L^-1 citrate (C-BC0.1). A formation-transport coupling mechanism for increasing the amount of PASi released was developed. Stable Si in the biomass was pyrolyzed to give silicate that was relatively mobile via nucleophilic attack of citrate and hydrolysis of amorphous Si. Silicate species were then released through the porous surface and widening cracks caused by pyrolysis. At citrate concentrations >0.1 mol⋅L^-1, the surface and cracks were easily blocked by precipitates formed during pyrolysis. The ability of C-BC to remove HMs was assessed using Cu as an example. C-BC0.1 was optimal for adsorbing Cu, and the maximum adsorption capacity was 271.73 mg⋅g^-1. The Cu adsorption mechanism mainly involved surface precipitation, surface complexation, electrostatic attraction and hydrogen bonding. Our research provides important implications for simultaneously addressing Si deficiency and HMs contaminant problems by these materials for soil amendment in agro-ecosystem.

Simultaneous removal of heavy metal ions using carbon dots-doped hydrogel particles

Heavy metal ions (HMI) have attracted worldwide concern due to their serious environmental pollution which led to the risk of health conditions. From Red Malus floribunda fruits, nitrogen-doped carbon dots (N-CDs) were prepared, followed by hybrid-spherical shaped hydrogel particles (CGCDs) were prepared. The prepared CGCDs were utilized as adsorbents for HMI-(Hg(II), Cd(II), Pb(II), and Cr(III)) from water. N-CDs with about 4.0 nm in diameter were characterized by various techniques such as field emission-scanning electron microscopy (FE-SEM) and attenuated total reflection-fourier transform infrared spectroscopy (ATR-FTIR) that confirm the presence of nitrogen, oxygen, and carbon functionalities. The prepared spherical CGCDs were characterized very well before it was used as HMI adsorbents. The sizes of the CGCDs were ranges between 20 and 300 μm and the degree of swelling was calculated as 1320 %. ATR-FTIR and X-ray diffraction analyses reveal the presence of N-CDs in CGCDs. Further, FE-SEM confirms the spherical shape morphology of CGCDs. Three different concentrations of HMI solutions were 500 mg/L, 1000 mg/L, and 1500 mg/L. Hg(II) adsorbed proficiently by CGCDs in single metal ion systems with ~72 % and almost complete removal of Hg(II) ions (99 %) in multiple metal ion systems was observed. Moreover, all metal ions Hg(II), Cd(II), Pb(II), and Cr(III) were efficiently (>70 %) removed in multiple systems by CGCDs. After HMI adsorption experiments, the elemental mapping from FE-SEM and X-ray photoelectron spectroscopy studies conveys the presence of HMI on CGCDs. This suggests that CGCDs would be a suitable adsorbent for the simultaneous removal of multiple HMI from wastewater.

Avian Egg: A Multifaceted Biomaterial for Tissue Engineering

Most components in avian eggs, offering a natural and environmentally friendly source of raw materials, hold great potential in tissue engineering. An avian egg consists of several beneficial elements: the protective eggshell, the eggshell membrane, the egg white (albumen), and the egg yolk (vitellus). The eggshell is mostly composed of calcium carbonate and has intrinsic biological properties that stimulate bone repair. It is a suitable precursor for the synthesis of hydroxyapatite and calcium phosphate, which are particularly relevant for bone tissue engineering. The eggshell membrane is a thin protein-based layer with a fibrous structure and is constituted of several valuable biopolymers, such as collagen and hyaluronic acid, that are also found in the human extracellular matrix. As a result, the eggshell membrane has found several applications in skin tissue repair and regeneration. The egg white is a protein-rich material that is under investigation for the design of functional protein-based hydrogel scaffolds. The egg yolk, mostly composed of lipids but also diverse essential nutrients (e.g., proteins, minerals, vitamins), has potential applications in wound healing and bone tissue engineering. This review summarizes the advantages and status of each egg component in tissue engineering and regenerative medicine, but also covers their current limitations and future perspectives.

Underwater suspended bifunctionalized polyethyleneimine-based sponge for selective removal of anionic pollutants from aqueous solution

Highly selective and efficient removal of ionic pollutants, including ionic organic compounds and heavy metal ions from water, is still a huge challenge due to the complex nature of polluted water. To meet this challenge, we presented the synthesis of bifunctionalized polyethyleneimine-based sponges through cryo-polymerization via BDDE as the crosslinker followed by bifunctional modification with glycidyl trimethylammonium chloride (GTAC) and phenyl glycidyl ether (PGE), which simultaneously afford quaternary ammonium cation (strongly basic and hydrophilic) and phenyl (hydrophobic) functionalities, respectively. As a result, a hybrid hydrophilic-hydrophobic sponge is generated that could stably be suspended underwater due to the co-operative effect of the water-absorbing hydrophilic domain and the hydrophobic domain generating buoyancy. The quaternized and phenyl-functionalized PEI-based sponge (S_QP-PEI) demonstrated highly selective and efficient removal of anionic pollutants from water, including diclofenac sodium (DIC), methyl orange (MO) and chromium (Cr(VI)) with co-existing interferences. The Langmuir isotherms revealed the maximum adsorption capacities of 342.7 mg/g, 491.9 mg/g, and 242.7 mg/g for DIC, MO, and Cr(VI), respectively. The studies of adsorption mechanism suggested that the bifunctional S_QP-PEI sponge indeed afford both strong anion-exchange interaction and π-π interaction toward organic pollutants DIC and MO, and the strong anion-exchange interaction can be the dominated adsorption mechanism for anionic DIC, MO and Cr(VI) species. The suspended S_QP-PEI also demonstrated excellent reusability, which shows the potential of S_QP-PEI for real applications.

Self-decoration of N-doped graphene oxide 3-D hydrogel onto magnetic shrimp shell biochar for enhanced removal of hexavalent chromium

In this work, a novel decorated and combined N-doped graphene oxide hydrogel with shrimp shell magnetic biochar (NGO3DH-MSSB) biosorbent was fabricated as an effective material for Cr(VI) removal. Three-dimensional self-assembled graphene oxide hydrogel was synthesized using nitrogen source, ethylenediamine (EDA). Characterizations of NGO3DH-MSSB biosorbent were established by FT-IR, TGA, SEM and BET, where high surface area (398.05 m²/g) compared with that of MSSB (138.64 m²/g) was characterized. The maximum achieved swelling ratio (800%) was only after 300 min. The binding mechanisms between Cr(VI) ions and NGO3DH-MSSB biosorbent were controlled by electrostatic adsorption (ion-pair), pore filling, and reduction-coordination reaction. Adsorption was described by the pseudo-second order kinetic (R² =0.9994, 0.9983 and 0.9992) at 10, 50 and 100 mg/L and Langmuir isotherm model (R² =0.9997, 0.9957 and 0.9912) at 25, 40 and 50 °C. The adsorption capacity (350.42 mg/g) was achieved at pH 1.0, using initial Cr(VI) concentration (100 mg/L) and contact time (180 min) at room temperature. NGO3DH-MSSB biosorbent could be successfully reused after eight cycles. The percentage removal of Cr(VI) were confirmed as 99.79%, 99.20% and 98.00% from tap water, sea water and wastewater, respectively.

Efficient removal of selenate in water by cationic poly(allyltrimethylammonium) grafted chitosan and biochar composite

The discovery of cheap and eco-friendly functional materials for the removal of anionic heavy metal ions is still challenging in the treatment of heavy metal-contaminated water. Herein, a new poly(allyltrimethylammonium) grafted chitosan and biochar composite (PATMAC-CTS-BC) was introduced for the removal of selenate (SeO₄^2-) in water. Results suggest that the PATMAC-CTS-BC showed a rapid removal of SeO₄^2- with efficiency of >97% within 10 min and it followed a pseudo-second-order model. High capacity of SeO₄^2- adsorption by the composite was achieved, with maximum value of 98.99 mg g^-1 based on Langmuir model, considerably higher than most of reported adsorbents. The thermodynamic results reflected the spontaneous and exothermic nature of SeO₄^2- adsorption onto the composite. The composite could be applied at a wide initial pH range (2-10) with high removal efficiency of SeO₄^2- because of permanent positive charges of quaternary ammonium groups (=N⁺-). The removal mechanisms of SeO₄^2- were mainly attributed to electrostatic interactions with =N⁺- and protonated -NH₃⁺ groups, and redox-complexation interactions with -NH₂, -NH-, and -OH groups. Besides SeO₄^2-, the hexavalent chromium (Cr₂O₇^2-) was considered as example to further demonstrate the anion removal capability of cationic hydrogel-BC composite. The study outcomes open up new opportunities to efficiently remove anionic heavy metal ions (e.g., SeO₄^2- and Cr₂O₇^2-) in water using these materials.

A Double cross-linked strategy to construct graphene aerogels with highly efficient methylene blue adsorption performance

A novel lysine and EDA double cross-linked graphene aerogel (LEGA) was constructed. The prepared LEGA was utilized as a methylene blue (MB) adsorbent in the wastewater treatment. It exhibits a three-dimensional interconnected porous structure benefiting dye adsorption. Its compression property is highly enhanced with the addition of lysine. Adsorption isotherm and kinetics of MB onto LEGA were discussed. Their results show that MB adsorption onto LEGA was fitted to follow Langmuir adsorption isotherm model and the pseudo-second-order kinetic model. LEGA has an excellent adsorption capacity towards MB as high as 332.23 mg/g and its MB adsorption process is proved to be an exothermic process. The mechanism for MB adsorption onto LEGA was proposed as the ion exchange, electrostatic interaction, π-π stacking interaction and hydrogen bonding. Thus, LEGA is confirmed to be a sustainable and green MB adsorbent with highly removal efficiency in the treatment of wastewater.