Highly efficient capture of odorous sulfur-based VOCs by ionic liquids

Process Simulation and Optimization on Ionic Liquids

Ionic liquids (ILs) are promising alternative compounds that enable the development of technologies based on their unique properties as solvents or catalysts. These technologies require integrated product and process designs to select ILs with optimal process performances at an industrial scale to promote cost-effective and sustainable technologies. The digital era and multiscale research methodologies have changed the paradigm from experiment-oriented to hybrid experimental-computational developments guided by process engineering. This Review summarizes the relevant contributions (>300 research papers) of process simulations to advance IL-based technology developments by guiding experimental research efforts and enhancing industrial transferability. Robust simulation methodologies, mostly based on predictive COSMO-SAC/RS and UNIFAC models in Aspen Plus software, were applied to analyze key IL applications: physical and chemical CO2 capture, CO2 conversion, gas separation, liquid-liquid extraction, extractive distillation, refrigeration cycles, and biorefinery. The contributions concern the IL selection criteria, operational unit design, equipment sizing, technoeconomic and environmental analyses, and process optimization to promote the competitiveness of the proposed IL-based technologies. Process simulation revealed that multiscale research strategies enable advancement in the technological development of IL applications by focusing research efforts to overcome the limitations and exploit the excellent properties of ILs.

Low-temperature oxidative removal of benzene from the air using titanium carbide (MXene)-Supported platinum catalysts

MXenes are an emerging class of two-dimensional (2D) inorganic materials with great potential for versatile applications such as adsorption and catalysis. Here, we describe the synthesis of a platinized titanium carbide MXene (Pt@Ti3C2) catalyst with varying amounts of platinum (0.1%-2 wt.%) for the low-temperature oxidation of benzene, an aromatic volatile organic compound often found in industrial flue gas. A 1% formulation of Pt@Ti3C2-R allowed near-complete (97%) oxidation of benzene to CO2 at 225 °C with a steady-state reaction rate (r) of 0.119 mol g-1·h-1. This low-temperature catalytic oxidation reaction was promoted by an increase in the lattice oxygen (O*)/Pt2+ species (active sites) of 1%Pt@Ti3C2-R from 45.3/34.6% to 71.0/61.1% through pre-thermal reduction under H2 flow, as revealed by X-ray photoelectron spectroscopy, temperature-programmed reduction, and in situ diffuse reflectance infrared Fourier transform spectroscopy analyses. The cataltyic activity of 1% Pt@Ti3C2-R against benzene was assessed under the control of the key process variables (e.g., catalyst mass, flow rate, benzene concentration, relative humidity, and time-on-stream) to help optimize the oxidation reaction process. The results provide new insights into the use of platinum-based 2D MXene catalysts for low-temperature oxidative removal of benzene from the air.

Effective absorption of dichloromethane using deep eutectic solvents

Chlorinated volatile organic compounds (VOCs), of which dichloromethane (DCM) has become one of the main components because of its extensive use and strong volatility, are recognized as extremely hazardous and refractory pollutants in the atmosphere. The efficient treatment of DCM is of great significance to the protection of environment and human health. In this work, the strategy of DCM capture with deep eutectic solvents (DESs) with different hydrogen bond acceptors (HBAs) and hydrogen bond donors (HBDs) was proposed and systematically investigated. The experimental results show that tetrabutylphosphonium chloride: levulinic acid ([P₄₄₄₄][Cl]-LEV) presents the most excellent DCM absorption capacity among all DESs studied and considerable capacity in [P₄₄₄₄][Cl]-LEV (1:2) with 899 mg DCM/g DES (5.58 mol DCM/mol DES) at 30 °C and DCM partial pressure of 0.3 bar can be achieved. The microscopic absorption mechanism is explored by ¹HNMR and FT-IR spectra as well as quantum chemistry calculations, indicating that the absorption is a physical process. The interaction energy analysis suggests that the greater the interaction energy between DES and DCM, the greater the saturated absorption capacity of DCM. The hydrogen bond (HB) contributes most to the weak interaction between DCM and HBA/HBD, and both HBA and HBD play an important role in the absorption of DCM.

Hydrophobic deep eutectic solvents as green absorbents for hydrophilic VOC elimination

As a common hydrophilic volatile organic compound (VOC), acetone is known to harm human health and the atmospheric environment. Absorption is a typical technique applied to capture hydrophilic VOCs; however, the difficulty of separating and recovering absorbed hydrophilic VOCs (e.g., acetone) from aqueous absorbents has become one of the major challenges in practical applications. Hydrophobic deep eutectic solvents (DESs) have therefore been developed as novel green absorbents for capturing hydrophilic VOCs in the present work. The compiled results show that efficient hydrophilic VOC elimination can be accomplished by the proposed hydrophobic DESs through high absorption capacity and thermodynamically favorable gas-to-liquid mass transfer. Among the explored DESs, the hydrophobic DES containing thymol [Thy] and decanoic acid [DecA] with a molar ratio of 1:1 has achieved the highest absorption capacity of acetone, i.e., 6.57 mg acetone per g DES at 20 °C and 1480 ppm acetone. The oxygen of acetone interacts favorably with the hydrogen atom of [Thy] upon absorption, rendering hydrogen bonding interaction surpassing polarity as the key factor in attaining superior solubility of acetone in DESs. Moreover, the absorbed acetone can be easily removed from Thy-based DESs, realizing an effective hydrophilic VOC elimination process with economic and ecological benefits.

Cyclodextrin-based supramolecular low melting mixtures: efficient absorbents for volatile organic compounds abatement

Cyclodextrins (CDs) and deep eutectic solvents (DESs) are emerging absorbent materials for the removal of volatile organic compounds (VOCs). In this study, we have used combination of modified CDs and levulinic acid to form four DESs analogs, referred to as supramolecular low-melting mixtures (LMMs), to study their absorption characteristics towards five VOCs, namely acetaldehyde, butanone, dichloromethane, thiophene, and toluene. The supramolecular LMMs showed up to 250-fold reduction in the vapor-liquid partition coefficients compared to water. The overall absorption capacity found to be synergistic and seemed to be dictated by the hydrophobicity of the VOCs. Toluene and dichloromethane were absorbed at 99 and 95% by the supramolecular LMMs, respectively, even at higher concentrations, with a linear relationship between the concentration and absorption capacity. The LMMs also retained their absorption capacities even after five absorption/desorption cycles.