Air oxidation coupling NH3 treatment of biomass derived hierarchical porous biochar for enhanced toluene removal

A complete review on the oxygen-containing functional groups of biochar: Formation mechanisms, detection methods, engineering, and applications

Biochar is a porous carbon material generated by the thermal treatment of biomass under anaerobic or anoxic conditions with wealthy Oxygen-containing functional groups (OCFGs). To date, OCFGs of biochar have been extensively studied for their significant utility in pollutant removal, catalysis, capacitive applications, etc. This review adopted a whole system philosophy and systematically summarizes up-to-date knowledge of formation, detection methods, engineering, and application for OCFGs. The formation mechanisms and detection methods of OCFGs, as well as the relationships between OCFGs and pyrolysis conditions (such as feedstocks, temperature, atmosphere, and heating rate), were discussed in detail. The review also summarized strategies and mechanisms for the oxidation of biochar to afford OCFGs, with the performances and mechanisms of OCFGs in the various application fields (environmental remediation, catalytic biorefinery, and electrode material) being highlighted. In the end, the future research direction of biochar OCFGs was put forward.

Sustainable Conversion of Harmful Algae Biomass into a CO2 Reduction Electrocatalyst for Two-Fold Carbon Utilization

Harmful algae blooms (HABs) frequently occur all over the world and cause great harm to the environment, human health, and aquatic ecosystems. However, owing to their great growth rate and large nutrient intake capacity, algae can enrich a large amount of carbon (CO₂) and nutritional elements (N and P) in their biomass. Thus, this could be applied as a robust approach to battle global warming and water eutrophication if the harmful algae biomass was effectively harvested and utilized. Herein, we propose a thermochemical approach to convert algae biomass into a nitrogen-doped electrocatalyst for CO₂ reduction. The as-synthesized carbon catalyst exhibits a favorable electrochemical CO₂ reduction activity. The key drivers of the environmental impacts in the thermochemical conversion approach with a comparison with the commonly used landfilling approach are identified with life cycle assessment. The former presents much lower environmental burdens in terms of impacts such as freshwater/terrestrial ecotoxicity and human toxicity than the latter. Moreover, if the thermochemical conversion process was successfully applied for biomass conversion worldwide, 2.17 × 10⁸ tons of CO₂-eq, 8.42 × 10⁶ tons of N, and 1.21 × 10⁶ tons of P could be removed from the global carbon and other element cycles. Meanwhile, the thermochemical approach is also similar to landfilling in terms of costs. The results from this work provide a brand-new perspective for achieving twofold CO₂ utilization and efficiently battling harmful algae blooms.

Synthesis of hierarchical porous zirconium dioxide and its application in the detection of sulfonamides in animal-derived food

In order to effectively remove grease for the detection of sulfonamides, a non-toxic and low-cost hierarchical porous zirconia material was synthesized using the dual template method. The lipid impurities in an animal-derived food matrix can be absorbed by hierarchical zirconia. A ZrO₂ prepolymer was synthesized by mixing amphiphilic triblock copolymer poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) (P123) with tannin extract as the double template and Zr(SO₄)₂ as the metal source. After aging, drying and calcination at high temperature, the prepolymer transforms into a hierarchical porous structure. The synthesized materials were characterized using SEM, XRD, FT-IR, and BET. The results show that the material has an abundant pore structure and hierarchical pore structure. The adsorption conditions were optimized. The hierarchical porous ZrO₂ synthesized by this method is relatively uniform, and is characterized by large specific surface area as well as high lipid impurity adsorption capacity. Through the optimization experiment of adsorption conditions, we found that hierarchical porous ZrO₂ can reach the maximum adsorption capacity in 60 min under weak acidic conditions. The samples are used for actual sample testing such as HPLC of sulfadiazine (SD), sulfamethazine (SM2), sulfamethoxydiazine (SMD), sulfamethoxazole (SIZ) and sulfadimethoxine (SDM), and the recovery experiment of sulfonamides in chicken was carried out. The recoveries were 80.9-97.6% and the detection limit was 3.8-17.6 μg L^-1. This work provides a new strategy for oil removal using hierarchical porous materials.

Lignite-Based N-Doped Porous Carbon as an Efficient Adsorbent for Phenol Adsorption

The treatment of phenolic-containing wastewater has received increased attention in recent years. In this study, the N-doped porous carbons were prepared from lignite with tripolycyanamide as the N source, and their phenol adsorption behaviors were investigated. Results clearly showed that the addition of tripolycyanamide largely improved the surface area, micropore volume, N content and thus the phenol adsorption capacity of lignite-based carbons. The N-doped sample prepared at 700 °C showed a surface area of 1630 m2/g and a phenol adsorption capacity as high as 182.4 mg/g at 20 °C, which were 2.0 and 1.6 times that of the lignite-based carbon without N-doping. Pseudo-second order and Freundlich adsorption isotherm models could better explain the phenol adsorption behaviors over lignite-based N-doped porous carbon. Theoretical calculations demonstrated that phenol adsorption energies over graphitic-N (−72 kJ/mol) and pyrrolic-N (−74 kJ/mol) groups were slightly lower than that over the N-free graphite layer (−71 kJ/mol), supporting that these N-containing groups contribute to enhance the phenol adsorption capacity. The adsorption mechanism of phenol over porous carbon might be interpreted by the π–π dispersion interactions between aromatic-ring and carbon planes, which could be enhanced by N-doping through increasing π electron densities in the carbon plane.

Nanoporous biochar with high specific surface area based on rice straw digestion residue for efficient adsorption of mercury ion from water

The unreasonable disposal of residue after anaerobic digestion seriously affects the stability of the ecosystem, and the preparation of adsorbent is an effective way to value-added utilization of the residue. In this study, a high adsorption capacity (209.65 mg/g) biochar-based adsorbent was prepared by hydrothermal carbonization and alkali modification using rice straw biogas residue. The lignocellulosic structure was destroyed after anaerobic digestion, forming porous biochar with larger specific surface area (2372.51 m²/g) and richer pore structure. Besides, the mercury ion complexed on the adsorbent surface in monovalent and divalent forms and possessed favorable selectivity in the presence of other examples of interference. The adsorption process is consistent with pseudo second-order kinetics and the Langmuir isotherm, indicating a predominance of chemisorption. This study provides a methodology for use of rice straw biogas residue and treatment of mercury containing wastewater, which offers a fresh direction for resource utilization of biogas residue.

Adsorption performance and kinetic study of hierarchical porous Fe-based MOFs for toluene removal

In light of the promising merits of large surface area, uniform pore size, and tunable functional groups, metal-organic frameworks (MOFs) have great potential to be utilized for adsorbing volatile organic compounds (VOCs). In this study, three Fe-based MOFs, MIL-100(Fe), MIL-101(Fe), and MIL-53(Fe), were synthesized systematically and used to adsorb a typical VOC, toluene. Static adsorption, dynamic breakthrough curves, and adsorption kinetics were conducted to assess the adsorption performance. Additionally, the surface functional groups, pore structure, and morphology were systematically characterized by means of XRD, SEM, XPS, FTIR and N₂ adsorption-desorption analyses to reveal the cause of the difference in adsorption of these Fe-based MOFs. The results revealed that the maximum equilibrium adsorption capacity of 663 mg/g was achieved by MIL-100(Fe) with the highest specific surface area and pore volume. The dynamic adsorption of toluene on MIL-100(Fe) was in accordance with the pseudo-first order kinetic model and the Langmuir isothermal model. The formed π-π stacking interaction between organic ligands and the benzene ring in the MIL-100(Fe) cluster is the primary adsorption mechanism based on XPS analysis. Moreover, MIL-100(Fe) was easily regenerated via microwave irradiation with a negligible adsorption capacity decrease after three cycles. This work highlights the feasibility of hierarchical porous Fe-based MOFs as toluene adsorbents and promotes the application of MOFs in the field of pollution control.

Hierarchical porous biochar from plant-based biomass through selectively removing lignin carbon from biochar for enhanced removal of toluene

This study proposed a simple and green air oxidation (AO) method to prepare hierarchical porous biochar by selectively removing lignin carbon from biochar after the pyrolysis of plant-based biomass, based on the fact that the thermal decomposition temperature in air between lignin carbon and cellulose/hemicellulose carbon was different. Three kinds of biomass with different lignocellulose contents were used, including walnut shell, cypress sawdust and rice straw. The results found that AO treatment could effectively improve the pore structure of the three biochar. The specific surface area of WCO-4, CCO-4 and RCO-4 was 555.0 m²/g, 418.7 m²/g and 291.9 m²/g, respectively, which was significantly higher than those of WC (319.5 m²/g), CC (381.7 m²/g) and RC (69.6 m²/g), respectively. Among these, walnut shell biochar with air oxidation (WCO) had higher surface area of 555.0 m²/g and mesopore volume of 0.116 cm³/g, this was related to its high content of lignin, which could facilitate the formation of mesopores by AO treatment with high selectivity. The toluene adsorption capacity of WCO reached 132.9 mg/g, which increased by 223.4% from that without AO treatment. The kinetics study indicated that the diffusion rates of toluene molecule were improved due to the increased mesopores volume of biochar and micropores also play an important role in the adsorption of toluene. The results demonstrate that AO treatment is a promising method to develop hierarchical porous structure for lignocellulose-rich plant-based biomass with low cost and environmental-friendly, which greatly enhanced the toluene adsorption capacity.

A review on application of activated carbons for carbon dioxide capture: present performance, preparation, and surface modification for further improvement

The atmosphere security and regulation of climate change are being continuously highlighted as a pressing issue. The crisis of climate change owing to the anthropogenic carbon dioxide emission has led many governments at federal and provincial levels to promulgate policies to address this concern. Among them is regulating the carbon dioxide emission from major industrial sources such as power plants, petrochemical industries, cement plants, and other industries that depend on the combustion of fossil fuels for energy to operate. In view of this, various CO2 capture and sequestration technologies have been investigated and presented. From this review, adsorption of CO2 on porous solid materials has been gaining increasing attention due to its cost-effectiveness, ease of application, and comparably low energy demand. Despite the myriad of advanced materials such as zeolites, carbons-based, metal-organic frameworks, mesoporous silicas, and polymers being researched, research on activated carbons (ACs) continue to be in the mainstream. Therefore, this review is endeavored to elucidate the adsorption properties of CO2 on activated carbons derived from different sources. Selective adsorption based on pore size/shape and surface chemistry is investigated. Accordingly, the effect of surface modifications of the ACs with NH3, amines, and metal oxides on adsorption performance toward CO2 is evaluated. The adsorption performance of the activated carbons under humid conditions is also reviewed. Finally, activated carbon-based composite has been surveyed and recommended as a feasible strategy to improve AC adsorption properties toward CO2. The activated carbon surface in the graphical abstract is nitrogen rich modified using ammonia through thermal treatment. The values of CO2 emissions by sources are taken from (Yoro and Daramola 2020).

Enhanced Catalytic Oxidation of Toluene over Manganese Oxide Modified by Lanthanum with a Coral-Like Hierarchical Structure Nanosphere

Coral-like lanthanum manganese oxides (La_yMnO_x) with a hierarchical structure nanosphere were successfully prepared using a simple method, which presented a high-efficiency catalytic performance for toluene combustion. Among them, La_0.08MnO_x with the Mn₃O₄ phase exhibits superior catalytic activity, such as a lower T₉₅ value (218 °C), excellent H₂O resistance, and catalytic stability. The effects of La addition on the bulk and surface physicochemical properties of La_yMnO_x were investigated by sorts of characterization including X-ray diffraction, scanning electron microscopy, transmission electron microscopy, N₂ adsorption-desorption, temperature-programmed reduction with H₂, temperature-programmed desorption of O₂, X-ray photoelectron spectroscopy, and so forth. The results demonstrate that the doping of La can induce the variation of physicochemical properties and the formation of more surface oxygen species and high valence state amorphous manganese oxides, improving low-temperature reducibility, which facilitates good catalytic activity for La_0.08MnO_x. A series of in situ diffuse reflectance infrared Fourier transform spectroscopy experiments for toluene adsorption were performed on the La_0.08MnO_x catalyst pretreated under different atmosphere conditions to investigate the role of oxygen species and the reaction processes. The results indicate that the abundant surface oxygen species over La_0.08MnO_x can make the rapid formation of benzoic acid species, further transfer into CO₂ and H₂O, which is considered as the key factor in the activation and oxidation of toluene.