A safer and cleaner process for recovering thorium and rare earth elements from radioactive waste residue

A sustainable strategy for targeted extraction of thorium from radioactive waste leachate based on hydrophobic deep eutectic solvent

In this work, the new hydrophobic deep eutectic solvents (HDESs) based on 2-hexyldecanoic acid (HDA) as a hydrogen bond donor (HBD) were used to selectively enrich trace Th from radioactive waste leach solution. These HDESs are characterized by low toxicity, bio-friendliness, low viscosity and sufficient hydrophobicity. Compared with Al, Mg, Ca and RE, HDESs exhibited exceptional selectivity for Th extraction, along with high loading capacity, easy stripping and stable reusability. The mechanism of Th extraction by the HDES is a cation exchange reaction. Based on the thymol (TL):HDA (1:3) HDES, a short flow closed-loop recovery process of Th in the leach solution of radioactive waste residue was developed. After a single-step extraction, the extraction percentage (E%) of Th exceeded 98.0%, while the E% of other elements was less than 0.14%. After stripping, the concentration of Th in the concentrated solution reached 2.16 × 103 mg/L with a purity of 74.2%, which could be directly used for subsequent purification. By adjusting the pH to 4.00, the raffinate was used as a feed solution for RE elements recovery. The HDES-based extraction strategy for Th is simple, safe, efficient and environmentally friendly, providing a new idea for the recovery of radioactive waste residues.

The enrichment of rare earth from magnesium salt leaching solution of ion-adsorbed type deposit: A waste-free process for removing impurities

Due to the complex composition of ion-adsorbed type rare earth ore leaching solution, there are challenges in the process of rare earth (RE) separation, such as large RE loss rate, low product purity, radioactive residue and so on. In this article, 8-hydroxyquinoline modified silica gel (HQ-SiO₂) and 2,2'-(1,4-phenylenebis(oxy)) dioctanoic acid (PPBOA) were used to form an efficient process for impurities removal and RE enrichment. Solid phase extraction successfully intercepted 96.7% of the radioactive element thorium. The concentration of aluminium was reduced to 2.14 ppm by frank chromatography. Rare earth elements were enriched from 336.35 mg/L to 237.75 g/L by extraction-precipitation, that is, the enrichment multiple reached more than 700 and the proportion of RE was increased from 21.85% to 96.62%. The loss rate of RE was controlled below 1.59%. Moreover, the magnesium salt leaching solution could be recycled for the leaching of RE ores. Although some liquid waste need to be treated in the processes of HQ-SiO₂ production and regeneration, the integrated process helps to decrease volatile organic solvent, acid-base consumption, wastewater and waste residue. It is an environment-friendly RE enrichment and impurity removal process, which shows application potential in the production field of ion-adsorbed type rare earth mineral products.

A holistic approach for the recovery of rare earth elements and scandium from secondary sources under a circular economy framework - A review

Limited natural resources and a continuous increase in the demand for modern technological products, is creating a demand and supply gap for rare earth elements (REEs) and Sc. There is therefore a need to adopt the sustainable approach of the circular economy system (CE). In this review, we defined six steps required to close the loop and recover REEs, using a holistic approach. Recent statistics on REEs and Sc demand and the number of waste generations are reported and studies on more environmentally friendly, economic, and/or efficient recovery processes are summarized. Pilot-scale recovery facilities are described for several types of secondary sources. Finally, we identify obstacles to closing the REE loop in a circular economy and the reasons why secondary sources are not preferred over primary sources. Briefly, recovery from secondary sources should be environmentally and economically friendly and of an acceptable standard concerning final product quality. However, current technologies for recovery from for secondary sources are limiting and technology needs will vary depending on the source type. The quality/purity of the recovered metals should be proven so that they do not result in any adverse effects on the product quality, when they are being used as secondary raw material. In addition, for industrial-scale facilities, process improvements are required that consider environmental conditions.

Planning for disposal of COVID-19 pandemic wastes in developing countries: a review of current challenges

The health sector is critical to the well-being of any country, but developing countries have several obstacles that prevent them from providing adequate health care. This became an even larger concern after the COVID-19 outbreak left millions of people dead worldwide and generated huge amounts of infected or potentially infected wastes. The management and disposal of medical wastes during and post-COVID-19 represent a major challenge in all countries, but this challenge is particularly great for developing countries that do not have robust waste disposal infrastructure. The main problems in developing countries include inefficient treatment procedures, limited capacity of healthcare facilities, and improper waste disposal procedures. The management of medical wastes in most developing countries was primitive prior to the pandemic. The improper treatment and disposal of these wastes in our current situation may further speed COVID-19 spread, creating a serious risk for workers in the medical and sanitation fields, patients, and all of society. Therefore, there is a critical need to discuss emerging challenges in handling, treating, and disposing of medical wastes in developing countries during and after the COVID-19 outbreak. There is a need to determine best disposal techniques given the conditions and limitations under which developing countries operate. Several open questions need to be investigated concerning this global issue, such as to what extent developing countries can control the expected environmental impacts of COVID-19, particularly those related to medical wastes? What are the projected management scenarios for medical wastes under the COVID-19 outbreak? And what are the major environmental risks posed by contaminated wastes related to COVID-19 treatment? Studies directed at the questions above, careful planning, the use of large capacity mobile recycling facilities, and following established guidelines for disposal of medical wastes should reduce risk of COVID-19 spread in developing countries.