Synthesis of MnO2 derived from spent lithium-ion batteries via advanced oxidation and its application in VOCs oxidation

Rational design of waste anode graphite-derived carbon catalyst to activate peroxymonosulfate for atrazine degradation

As the rapidly growing number of waste lithium-ion batteries (LIBs), the recycling and reutilization of anode graphite is of increasing interest. Converting waste anode graphite into functional materials may be a sensible option. Herein, a series of carbonaceous catalysts (TG) were successfully prepared using spent anode graphite calcined at various temperatures and applied for activating peroxymonosulfate (PMS) to degrade atrazine (ATZ). The catalyst obtained at 800 °C (TG-800) showed the optimum performance for ATZ removal (99.2% in 6 min). Various experimental conditions were explored to achieve the optimum efficiency of the system. In the TG-800/PMS system, free radicals (e.g., SO4·-, HO·), singlet oxygen (1O2), together with a direct electron transfer pathway all participated in ATZ degradation, and the ketonic (CO) group was proved as the leading catalytic site for PMS activation. The potential degradation routes of ATZ have also been presented. According to the toxicity assessment experiments, the toxicity of the intermediate products decreased. The reusability and universal applicability of the TG-800 were also confirmed. This research not only provides an efficient PMS activator for pollutant degradation, but also offers a meaningful reference for the recovery of waste anode graphite to develop environmentally functional materials.

Turning harmful Mn2+ to treasure: In-situ formed ε-MnO2 for removing heavy metals from acid mine drainage

Acid mine drainage (AMD) contains high concentrations of heavy metals, causing serious environmental pollution. Current neutralization techniques fail to recover and utilize valuable heavy metals, and generate large quantities of hazardous sludge. Manganese (Mn) is generally present at high levels in AMD. Therefore, this paper proposed a technology to recover Mn from AMD, by adding KMnO4 to converting Mn into ε-MnO2. Ultra-Violet C (UVC) was used to photolyze the residual KMnO4. The study then evaluated the processes and mechanisms involved in the technology. The photolysis of KMnO4 in strong acidic conditions was determined, and new mechanisms were proposed. MnO2 produced by the photolysis process was formed through the reaction between Mn(III) and KMnO4. In the absence of KMnO4, Mn(III) underwent further photolysis and was reduced to Mn2+. The maximum adsorption capacities of in-situ formed ε-MnO2 for Pb2+, Cd2+, and Fe3+ were 449.80, 122.05, and 779.88 mg/g, respectively. Higher Mn-OH levels and MnO2 regeneration were crucial in improving adsorption performance. Proton exchange and inner-circle complexation were the main pathways for Pb2+ and Cd2+ adsorption by in-situ formed ε-MnO2. A phase transformation occurred when a substantial amount of Fe3+ was adsorbed, leading to the gradual transformation to MnFe binary oxides. When applying in-situ formed ε-MnO2 technology for actual AMD treatment, 98.62 % of Mn in AMD was recovered within 24 h in the presence of ε-MnO2 for possible further reuse in industries, with a final recovery of 0.76 kg/m3. Further, this technique removed other heavy metals and reduced the sludge volume by 20.99 % when used as a pre-treatment step for neutralization. These results demonstrated the broad potential of this treatment technology.

Constructing High-Performance Cobalt-Based Environmental Catalysts from Spent Lithium-Ion Batteries: Unveiling Overlooked Roles of Copper and Aluminum from Current Collectors

Converting spent lithium-ion batteries (LIBs) cathode materials into environmental catalysts has drawn more and more attention. Herein, we fabricated a Co3O4-based catalyst from spent LiCoO2 LIBs (Co3O4-LIBs) and found that the role of Al and Cu from current collectors on its performance is nonnegligible. The density functional theory calculations confirmed that the doping of Al and/or Cu upshifts the d-band center of Co. A Fenton-like reaction based on peroxymonosulfate (PMS) activation was adopted to evaluate its activity. Interestingly, Al doping strengthened chemisorption for PMS (from -2.615 eV to -2.623 eV) and shortened Co-O bond length (from 2.540 Å to 2.344 Å) between them, whereas Cu doping reduced interfacial charge-transfer resistance (from 28.347 kΩ to 6.689 kΩ) excepting for the enhancement of the above characteristics. As expected, the degradation activity toward bisphenol A of Co3O4-LIBs (0.523 min-1) was superior to that of Co3O4 prepared from commercial CoC2O4 (0.287 min-1). Simultaneously, the reasons for improved activity were further verified by comparing activity with catalysts doped Al and/or Cu into Co3O4. This work reveals the role of elements from current collectors on the performance of functional materials from spent LIBs, which is beneficial to the sustainable utilization of spent LIBs.

Selective removal of thiosulfate from coke oven gas desulfurization wastewater by catalytic wet air oxidation with manganese-based oxide from spent ternary lithium-ion batteries

Selective and efficient removal of thiosulfates (S2O32-) to recover high-purity and value-added thiocyanate products by fractional crystallization process is a promising route for the resource treatment of coke oven gas desulfurization wastewater. Herein, catalytic wet air oxidation (CWAO), with manganese-based oxide synthesized from spent ternary lithium-ion batteries (MnOx-LIBs), was proposed to selectively remove S2O32- from desulfurization wastewater. 98.0 % of S2O32- is selectively removed by the MnOx-LIBs CWAO system, which was 4.1 times that of the MnOx CWAO system. The synergistic effect among multiple metals from spent LIBs induces the enlarged specific surface area, increased reactive sites and formation of oxygen vacancy, promoting the adsorption and activation of O2, thereby realizing high-efficiency removal of S2O32-. The satisfactory selective removal efficiency can be maintained in the proposed system under complex environmental conditions. Notably, the proposed system is cost-effective and applicable to actual wastewater, in which 81.2 % of S2O32- is selectively removed from coke oven gas desulfurization wastewater. More importantly, compared with the typical processes, the proposed process is simpler and more environmentally-friendly. This work provides an alternative route to selectively remove S2O32- from coke oven gas desulfurization wastewater, expecting to drive the development of resource utilization of coke oven gas desulfurization wastewater.

Boosting the Electrochemical Storage Properties of Co3O4 Nanowires by the Mn Doping Strategy with Appropriate Mn Doping Concentrations

High specific capacitance, high energy density, and high power density have always been important directions for the improvement of electrode materials for supercapacitors. In this paper, Co3O4 nanowire arrays with various Mn doping concentrations (Mn:Co molar ratio = 1:11, 1:5, 1:2) directly grown on nickel foam (NF) were prepared by a simple hydrothermal method and annealing process. The influence of Mn doping on the morphology, structure, and electrochemical behaviors of Co3O4 was investigated. The results show that partial substitution of Co ions with Mn ions in the spinel structure does not change the nanowire morphology of pure Co3O4 but increases the lattice parameter and decreases the crystallinity of cobalt oxide. Electrochemical measurements showed that Mn doping in Co3O4 could effectively enhance the redox activity, especially Co3O4 with a Mn doping ratio of 1:5, which exhibits the most excellent electrochemical performance, with the maximum specific capacitance of 1210.8 F·g-1 at 1 A·g-1 and a rate capability of 33.0% at 30 A·g-1. The asymmetric supercapacitor (ASC) device assembled with the optimal Mn-Co3O4 (1:5) and activated carbon (AC) electrode performs a high specific capacitance of 105.8 F·g-1, a high energy density of 33 Wh·kg-1 at a power density of 748.1 W·kg-1, and a capacitance retention of 60.2% after 5000 cycles. This work indicates that an appropriate Mn doping concentration in the Co3O4 lattice structure will have great potential in rationalizing the design of spinel oxides for efficient electrochemical performance.

Thermally Inducing Viscous Fluids to Generate Co-Based Perovskites Enriched with Active Species for the Removal of VOCs

Various Co-based perovskites are synthesized through thermally driving viscous fluids. In this process, rare earth salts, cobalt salts, and citric acid do not require homogeneous mixing but only need to be heated until they melt into a molten viscous slurry. The physicochemical properties of cobalt-based perovskites were examined using techniques such as X-ray diffraction (XRD), electron paramagnetic resonance (EPR), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-Mapping-EDS), X-ray photoelectron spectroscopy (XPS), hydrogen temperature-programmed reduction (H2-TPR), oxygen temperature-programmed desorption (O2-TPD), and N2 adsorption-desorption. The results indicate that the surface-active species can be controlled by altering the A-site elements of cobalt-based perovskites. All catalysts synthesized through the thermal treatment of viscous mixtures exhibited a low activation temperature and a low apparent activation energy for the catalytic oxidation of toluene. Among all cobalt-based perovskites, LaCoO3 demonstrated the most outstanding catalytic activity, primarily attributed to its capacity to expose a larger number of surface-active sites and oxygen species, as well as its superior reducibility. Furthermore, the formation process of optimal LaCoO3 was monitored using thermogravimetric analysis-differential scanning calorimetry (TGA-DSC), and the byproducts of the low-temperature catalytic oxidation of toluene by the catalyst were identified using gas chromatography-mass spectrometry (GC-MS). The possible mechanism of toluene oxidation was inferred by in situ diffuse reflection infrared Fourier transform spectroscopy (DRIFTS). Moreover, LaCoO3 exhibits a predominant resistance to high-temperature hydrothermal conditions. This work provides a scalable and innovative approach to fabricating exceptionally effective catalysts for the efficient purification of VOCs.

Highly Dispersed FeAg-MCM41 Catalyst for Medium-Temperature Hydrogen Sulfide Oxidation in Coke Oven Gas

The traditional hydrolysis-cooling-adsorption process for coke oven gas (COG) desulfurization urgently needs to be improved because of its complex nature and high energy consumption. One promising alternative for replacing the last two steps is selective catalytic oxidation. However, most catalysts used in selective catalytic oxidation require a high temperature to achieve effective desulfurization. Herein, a robust 30Fe-MCM41 catalyst is developed for direct desulfurization at medium temperatures after hydrolysis. This catalyst exhibits excellent stability for over 300 h and a high breakthrough sulfur capacity (2327.6 mgS gcat-1). Introducing Ag into the 30Fe-MCM41 (30Fe5Ag-MCM41) catalyst further enhances the H2S removal efficiency and sulfur selectivity at 120 °C. Its outstanding performance can be attributed to the synergistic effect of Fe-Ag clusters. During H2S selective oxidation, Fe serves as the active site for H2S adsorption and dissociation, while Ag functions as the catalyst promoter, increasing Fe dispersion, reducing the oxidation capacity of the catalyst, improving the desorption capacity of sulfur, and facilitating the reaction between active oxygen species and [HS]. This process provides a potential route for enhancing COG desulfurization.

Enhancing pseudocapacitive properties of cobalt oxide hierarchical nanostructures via iron doping

Through co-precipitation and post-heat processing, nanostructured Fe-doped Co₃O₄ nanoparticles (NPs) were developed. Using the SEM, XRD, BET, FTIR, TGA/DTA, UV-Vis, and techniques were examined. The XRD analysis presented that Co₃O₄ and Co₃O₄ nanoparticles that had been doped with 0.25 M Fe formed single cubic phase Co₃O₄ NPs with average crystallite sizes of 19.37 nm and 14.09 nm, respectively. The as prepared NPs have porous architectures via SEM analyses. The BET surface areas of Co₃O₄ and 0.25 M Fe-doped Co₃O₄ NPs were 53.06 m²/g and 351.56 m²/g, respectively. Co₃O₄ NPs have a band gap energy of 2.96 eV and an extra sub-band gap energy of 1.95 eV. Fe-doped Co₃O₄ NPs were also found to have band gap energies between 2.54 and 1.46 eV. FTIR spectroscopy was used to determine whether M-O bonds (M = Co, Fe) were present. The doping impact of iron results in the doped Co₃O₄ samples having better thermal characteristics. The highest specific capacitance was achieved using 0.25 M Fe-doped Co₃O₄ NPs at 5 mV/s, which corresponding to 588.5 F/g via CV analysis. Additionally, 0.25 M Fe-doped Co₃O₄ NPs had energy and power densities of 9.17 W h/kg and 472.1 W/kg, correspondingly.

Ag doped Co3O4 nanoparticles for high-performance supercapacitor application

Ag doped Co₃O₄ nanoparticles (NPs) were synthesized via a co-precipitation method changing the concentration of Ag. The crystal structure, morphology, surface area, functional group, optical band gap, and thermal property were investigated by XRD, SEM, BET, FTIR, UV-Vis, and TGA/DTA techniques. The XRD results showed the formation of single-cubic Co₃O₄ nanostructured materials with an average crystal size of 19.37 nm and 12.98 nm for pristine Co₃O₄ and 0.25 M Ag-doped Co₃O₄ NPs. Morphological studies showed that pristine Co₃O₄ and 0.25 M Ag-doped Co₃O₄ NPs having a porous structure with small spherical grains, porous structures with sponge-like structures, and loosely packed porous structures, respectively. The pristine and 0.25 M Ag-doped Co₃O₄ NPs showed BET surface areas of 53.06 m²/g, and 407.33 m²/g, respectively. The band gap energy of Co₃O₄ NPs were 2.96 eV, with additional sub-bandgap energy of 1.95 eV. Additionally, it was discovered that the band gap energies of 0.25 M Ag-doped Co₃O₄ NPs ranged from 2.2 to 2.75 eV, with an extra sub-band with energies ranging from 1.43 to 1.94 eV for all as-prepared samples. The Ag-doped Co₃O₄ as prepared samples show improved thermal properties due to the doping effect of silver. The CV test confirmed that the 0.25 M Ag-doped Co₃O₄ NPs exhibited the highest specific capacitance value of 992.7 F/g at 5 mV/s in a 0.1 M KOH electrolyte solution. The energy density and power density of 0.25 M Ag-doped Co₃O₄ NPs were 27.9 W h/kg and 3816.1 W/kg, respectively.

Applications of Spent Lithium Battery Electrode Materials in Catalytic Decontamination: A Review

For a large amount of spent lithium battery electrode materials (SLBEMs), direct recycling by traditional hydrometallurgy or pyrometallurgy technologies suffers from high cost and low efficiency and even serious secondary pollution. Therefore, aiming to maximize the benefits of both environmental protection and e-waste resource recovery, the applications of SLBEM containing redox-active transition metals (e.g., Ni, Co, Mn, and Fe) for catalytic decontamination before disposal and recycling has attracted extensive attention. More importantly, the positive effects of innate structural advantages (defects, oxygen vacancies, and metal vacancies) in SLBEMs on catalytic decontamination have gradually been unveiled. This review summarizes the pretreatment and utilization methods to achieve excellent catalytic performance of SLBEMs, the key factors (pH, reaction temperature, coexisting anions, and catalyst dosage) affecting the catalytic activity of SLBEM, the potential application and the outstanding characteristics (detection, reinforcement approaches, and effects of innate structural advantages) of SLBEMs in pollution treatment, and possible reaction mechanisms. In addition, this review proposes the possible problems of SLBEMs in practical decontamination and the future outlook, which can help to provide a broader reference for researchers to better promote the implementation of “treating waste to waste” strategy.

Effects of synthesis temperature on ε-MnO2 microstructures and performance: Selective adsorption of heavy metals and the mechanism onto (100) facet compared with (001)

The heavy-metal adsorbent ε-MnO₂ was produced through a simple, one-step oxidation-reduction reaction at three different synthesis temperatures (25 °C, 50 °C and 75 °C) and their morphology and chemical-physical properties were compared. Of the three materials, MnO₂-25 had the largest specific surface area and the highest surface hydroxyl concentration. Its optimal performance was demonstrated by batch adsorption experiments with Pb²⁺, Cd²⁺ and Cu²⁺. Of the three metals, Pb²⁺ was adsorbed best (339.15 mg/g), followed by Cd²⁺ (107.50 mg/g) and Cu²⁺ (86.30 mg/g). When all three metals were present, Pb²⁺ was still absorbed best but now more Cu²⁺ was adsorbed than Cd²⁺. In order to explore the mechanism for the inconsistent adsorption order of Cd²⁺ and Cu²⁺ in single and competitive adsorption, we combined experimental data with density functional theory (DFT) calculations to elucidate the distinct adsorption nature of MnO₂-25 towards these three metals. This revealed that the adsorption affinity of the (100) facet was superior to (001), and since the surface complexes were also more stable on (100), this facet was most likely determining the adsorption order for the single metals. When the metals were present in combination, Pb²⁺ preferentially occupied the active adsorption sites of (100), forcing Cu²⁺ to be adsorbed on the (001) facet where Cd²⁺ was only poorly bound. Thus, the adsorption behavior was affected by MnO₂-25 surface chemistry at a molecular scale. This study provides an in-depth understanding of the adsorption mechanisms of the heavy metals on this adsorbent and offers theoretical guidance for production of adsorbent with improved removal efficiency.

Study on the synergy effect of MnOx and support on catalytic ozonation of toluene

MnO_x has received widespread attention in low-temperature catalytic oxidation of VOCs, however, the synergy effect of MnO_x and support on the VOCs catalytic ozonation were rarely studied. In this study, five different MnO_x/X (X: MCM-41, 13X, ZSM-5, HY, USY) were synthesized and found their support greatly affect the catalytic oxidation activity. MnO_x/MCM-41 presents the largest specific surface area, pore volume and unique surface morphology, and thereby provides more sites for MnO_x loading and VOCs adsorption. Moreover, MnO_x/MCM-41 presents a high proportion of Mn³⁺, which helps to enhance the ion exchange capability, and thus promotes the regeneration of oxygen vacancies. Furthermore, a part of Mn was proved to be introduced into the MCM-41 lattice, which can promote the electron transfer between the active components and the support, and thereby effectively improve the surface electronic properties of the catalyst. The toluene catalytic experiments showed that MnO_x/MCM-41 exhibited the best catalytic activity, presenting complete degradation of O₃ and VOCs at room temperature. In addition, 5 wt%MnO_x/MCM-41 exhibited better catalytic activity than other loading, and its higher surface oxygen species endowed it with strong water resistance and stability. In-situ DRIFTs indicated that toluene was initially oxidized into benzyl alcohol during the adsorption process, and then decomposed to intermediate products (benzaldehyde, phenolate, etc.) during the catalytic ozonation process, and finally oxidized to carbon dioxide. In conclusion, the supply of loading sites and the improvement of interfacial electron transfer are the manifestations of the synergy between the support and MnO_x, leading to the promotion of the catalytic ozonation of VOCs.

Sustainably recycling spent lithium-ion batteries to prepare magnetically separable cobalt ferrite for catalytic degradation of bisphenol A via peroxymonosulfate activation

A selective separation-recovery process based on tuning organic acid was proposed to the resource recycling of spent lithium-ion batteries (LIBs) for the first time. The low-cost preparation of CoFe₂O₄, reuse of waste acid and recovery of Li can be realized in this process, simultaneously. Li and Co in spent LIBs can be leached efficiently using citric acid as a leaching agent, and separated effectively from leaching solution by tuning oxalic acid content. The results from the characterizations of the prepared CoFe₂O₄ (CoFe₂O₄-LIBs) show that it possesses higher ratio of Co(II)/Co(III) and Fe(II)/Fe(III), larger surface specific area and more number of acid sites in comparison with pure CoFe₂O₄. Besides, CoFe₂O₄-LIBs was used to activate peroxymonosulfate (PMS) for the degradation of bisphenol A (BPA). Interestingly, its degradation performance is superior to that of pure CoFe₂O₄ and the related Co-based catalysts. The excellent degradation performance can be maintained in presence of inorganic ions (e.g., Cl^-, HCO₃^-, H₂PO₄^- and NO₃^-) with high concentration or humic acid. Moreover, surface-bound SO₄^∙- is considered as the main reactive species for the degradation of BPA. More importantly, CoFe₂O₄-LIBs can be readily recycled by using an external magnet and own superior ability of regeneration.

Recycling of Lithium Batteries—A Review

With the rapid development of the electric vehicle industry in recent years, the use of lithium batteries is growing rapidly. From 2015 to 2040, the production of lithium-ion batteries for electric vehicles could reach 0.33 to 4 million tons. It is predicted that a total of 21 million end-of-life lithium battery packs will be generated between 2015 and 2040. Spent lithium batteries can cause pollution to the soil and seriously threaten the safety and property of people. They contain valuable metals, such as cobalt and lithium, which are nonrenewable resources, and their recycling and treatment have important economic, strategic, and environmental benefits. Estimations show that the weight of spent electric vehicle lithium-ion batteries will reach 500,000 tons in 2020. Methods for safely and effectively recycling lithium batteries to ensure they provide a boost to economic development have been widely investigated. This paper summarizes the recycling technologies for lithium batteries discussed in recent years, such as pyrometallurgy, acid leaching, solvent extraction, electrochemical methods, chlorination technology, ammoniation technology, and combined recycling, and presents some views on the future research direction of lithium batteries.

Research progress of catalytic oxidation of volatile organic compounds over Mn-based catalysts – a review

With the rapid development of urbanization and industrialization, environmental pollution has become more severe. Volatile organic compounds (VOCs) could be originated from the following sources: domestic, mobile and industrial sources. As important air pollutants, VOCs could cause serious harm to the environment and human health. Therefore, removing VOCs has become a priority research direction of ecological issues. Among the many elimination methods, catalytic oxidation approaches are among the most effective and economical methods which can transform VOCs into CO2 and H2O. MnOx catalysts are among the most active catalysts, which can be further modified by different cations such as Cu2+, Co2+, Cr3+, Ni2+ and Ce4+ to form mixed oxides to improve the catalytic oxidation of VOCs activity. Moreover, MnOx can be loaded on the carrier, improving the redox and oxygen storage capacity and improving its stability and activity. This review explores the structure, preparation and oxidation state of Mn-based catalysts.

Recent progresses in the synthesis of MnO2 nanowire and its application in environmental catalysis

Nanostructured MnO₂ with various morphologies exhibits excellent performance in environmental catalysis owing to its large specific surface area, low density, and adjustable chemical properties. The one-dimensional MnO₂ nanowire has been proved to be the dominant morphology among various nanostructures, such as nanorods, nanofibers, nanoflowers, etc. The syntheses and applications of MnO₂-based nanowires also have become a research hotspot in environmental catalytic materials over the last two decades. With the continuous deepening of the research, the control of morphology and crystal facet exposure in the synthesis of MnO₂ nanowire materials have gradually matured, and the catalytic performance also has been greatly improved. Differences in the crystalline phase structure, preferably exposed crystal facets, and even the length of the MnO₂ nanowires will evidently affect the final catalytic performances. Besides, the modifications by doping or loading will also significantly affect their catalytic performances. This review carefully summarizes the synthesis strategies of MnO₂ nanowires developed in recent years as well as the influences of the phase structure, crystal facet, morphology, dopant, and loading amount on the catalytic performance. Besides, the cutting-edge applications of MnO₂ nanowires in the field of environmental catalysis, such as CO oxidation, the removal of VOCs, denitrification, etc., have been also summarized. The application of MnO₂ nanowire in environmental catalysis is still in the early exploratory stage. The gigantic gap between theoretical investigation and industrial application is still a great challenge. Compared with noble metal based traditional environmental catalytic materials, the lower cost of MnO₂ has injected new momentum and promising potential into this research field.

This review summarizes the synthesis strategies for MnO₂ nanowire and the influences of the phase structure, crystal facet, metal doping, and interface effect on its performance in various environmental catalysis processes.

Recovery of CuO/C catalyst from spent anode material in battery to activate peroxymonosulfate for refractory organic contaminants degradation

It is critical to developing low-cost and efficient catalysts to activate peroxymonosulfate for the degradation of organic contaminants, whereas it remains challenging. In the study, a recycle method to synthesize efficient heterogeneous catalysts was developed by exploiting the anode electrode of spent lithium-ion batteries as the raw material based on a one-step calcination process. The recycled anode material (AM) composed of copper oxide and graphite carbon was capable of efficiently activating peroxymonosulfate (PMS) to degrade a wide range of organic contaminants. In addition, an investigation was conducted on the effect of reactive parameters (e.g., catalyst dose, PMS dose, RhB concentration, and coexisting matters). Besides, the AM/PMS process could exhibit high effectiveness at a broad pH range (3-10) and in a real water matrix. The redox cycle of Cu(II)/Cu(I) in the AM acted as the predominated force to effectively facilitate the PMS activation for the formation of oxygen species, in which the SO₄^·- and ¹O₂ exerted a primary effect. Moreover, the non-radical pathway of electron transfer between RhB and PMS facilitated the removal of RhB. In this study, a reclamation approach was developed for the recycling of spent LIBs anodes, and insights into the development of catalysts in SR-AOPs were gained.

Low Temperature Combustion of VOCs with Enhanced Catalytic Activity Over MnO2 Nanotubes Loaded with Pt and Ni-Fe Spinel

MnO₂ nanotubes loaded with Pt and Ni-Fe spinel were synthesized using simple hydrothermal and sol-gel techniques. After loading with Ni-Fe spinel, the specific surface area of the material increases 3-fold. This change helped to provide more active sites and facilitated the association between the catalyst and volatile organic compounds (VOCs). X-ray photoelectron spectroscopy determined that the adsorbed oxygen concentrations were all greatly increased after Pt loading, indicating that Pt promoted the adsorption of oxygen and so accelerated the combustion process. The performance of the catalyst after loading with 2 wt % Pt was greatly improved, such that the T₉₀ for benzene decomposition was decreased to 113 °C. In addition, the 2% Pt/2Mn@NFO exhibited excellent low-temperature catalytic activity when reacting with low concentrations of toluene and ethyl acetate. This work therefore demonstrates a viable new approach to the development of Mn-based catalysts for the low temperature catalytic remediation of VOCs.

Influence of nickel doping on MnO2 nanoflowers as electrocatalyst for oxygen reduction reaction

Abstract

Doping is promising strategy for the alteration of nanomaterials to enhance their optical, electrical, and catalytic activities. The development of electrocatalysts for oxygen reduction reactions (ORR) with excellent activity, low cost and durability is essential for the large-scale utilization of energy storage devices such as batteries. In this study, MnO2 and Ni-doped MnO2 nanowires were prepared through a simple co-perception technique. The influence of nickel concentration on electrochemical performance was studied using linear sweep voltammetry and cyclic voltammetry. The morphological, thermal, structural, and optical properties  of MnO2 and Ni-doped MnO2 nanowires were examined by SEM, ICP-OES, FT-IR, XRD, UV–Vis, BET and TGA/DTA. Morphological analyses showed that pure MnO2 and Ni-doped MnO2 had flower-like and nanowire structures, respectively. The XRD study confirmed the phase transformation from ε to α and β phases of MnO2 due to the dopant. It was also noted from the XRD studies that the crystallite sizes of pure MnO2 and Ni-doped MnO2 were in the range of 2.25–6.6 nm. The band gaps of MnO2 and 0.125 M Ni-doped MnO2 nanoparticles were estimated to be 2.78 and 1.74 eV, correspondingly, which can be seen from UV–Vis. FTIR spectroscopy was used to determine the presence of functional groups and M–O bonds (M = Mn, Ni). The TGA/TDA examination showed that Ni-doping in MnO2 led to an improvement in its thermal properties. The cyclic voltammetry  results exhibited that Ni-doped MnO2 nanowires have remarkable catalytic performance for ORR in 0.1 M KOH alkaline conditions. This work contributes to the facile preparation of highly active and durable catalysts with improved catalytic performance mainly due to the predominance of nickel.

Article Highlights

Graphic abstract

Improved catalytic oxidation of propylene glycol methyl ether over Sm-Mn and Sm-Co perovskite-based catalysts prepared by the recycling of spent ternary lithium-ion battery

The spent ternary lithium-ion batteries were utilized as the precursors to prepare Sm-Mn and Sm-Co perovskite oxides (SmMnO₃-spent ternary lithium-ion battery [STLIB] and SmCoO₃-STLIB) for the first time. Their catalytic activities were evaluated by catalytic oxidation of propylene glycol methyl ether. Compared with that of the catalysts synthesized by analytical reagents, the catalytic activities of SmMnO₃-STLIB and SmCoO₃-STLIB had been significantly enhanced. The analysis of X-ray photoelectron spectroscopy (XPS) showed that the molar ratios of Mn⁴⁺/Mn³⁺ and O_ads/O_latt of SmMnO₃-STLIB were higher than that of pure SmMnO₃ and the Co³⁺/Co²⁺ ratios of SmCoO₃-STLIB was much larger than that of pure SmCoO₃. The hydrogen temperature-programmed reduction (H₂-TPR) and N₂ adsorption-desorption tests determined that the reducibilities and specific surface areas of SmMnO₃-STLIB and SmCoO₃-STLIB were also superior to pure catalysts. Ultimately, the by-products of the catalytic oxidation of propylene glycol methyl ether over SmMnO₃-STLIB were also detected by gas chromatography-mass spectrometry (GC-MS). This work will provide a demonstration for the resource utilization of spent lithium ions batteries and the analysis of the increased activity obtained by using spent lithium ions batteries as the precursors to prepare catalysts.