Performance of UV/acetylacetone process for saline dye wastewater treatment: Kinetics and mechanism

Ozone nanobubble technology as a novel AOPs for pollutants degradation under high salinity conditions

Conventional water treatment systems frequently exhibit diminished efficiency at high salinity - a significant issue especially for real industrial effluents - mostly due to the creation of intricate structures between pollutants and salts. One of the primary obstacles associated with high salinity conditions is the generation of by-products that pose additional hurdles for treatment. In this work, we have investigated the novel advanced oxidation process a so-called ozone nanobubble technology for degradation of the pollutants at high salinity conditions. The mass transfer is often the rate-limiting step in gas-liquid process and the poor rate of mass transfer diminishes the overall efficacy. One of the primary disadvantages associated with ozone is its restricted solubility and instability when dissolved in an aqueous solution. These characteristics impose limitations on its potential applications and need the use of specialized systems to facilitate gas-liquid interaction. In this work, we have also suggested enhancing the ozonation process through the utilization of ozone nanobubbles. The findings of our experiment and subsequent analysis indicate that the presence of nanobubbles enhances the process of ozonation through three key mechanisms: (i) an increased mass transfer coefficient, (ii) a higher rate of reactive oxygen species (ROS) generation attributed to the charged interface, and (iii) the nanobubble interface serving as an active surface for chemical reactions. The predicted mass transfer coefficients were found to range from 3 to 3.5 min-1, a value that is notably greater than that seen for microbubbles. The study showcased the degradation of methylene blue dye through the utilization of ozone nanobubbles, which exhibited a much higher rate of dye degradation compared to ozone microbubbles. The confirmation of the radical degradation mechanism was achieved by the utilization of electron spin resonance (ESR) measurements. The developed process has high potential for application in industrial scale textile wastewater treatment.

Unique effect of bromide ion on intensification of advanced oxidation processes for pollutants removal: A systematic review

Advanced oxidation processes (AOPs) have been developed to decompose toxic pollutants to protect the aquatic environment. AOP has been considered an alternative treatment method for wastewater treatment. Bromine is present in natural waters posing toxic effects on human health and hence, its removal from drinking water sources is necessary. Of the many techniques advanced oxidation is covered in this review. This review systematically examines literature published from 1997 to April 2024, sourced from Scopus, PubMed, Science Direct, and Web of Science databases, focusing on the efficacy of AOPs for pollutant removal from aqueous solutions containing bromide ions to investigate the impact of bromide ions on AOPs. Data and information extracted from each article eligible for inclusion in the review include the type of AOP, type of pollutants, and removal efficiency of AOP under the presence and absence of bromide ion. Of the 1784 documents screened, 90 studies met inclusion criteria, providing insights into various AOPs, including UV/chlorine, UV/PS, UV/H2O2, UV/catalyst, and visible light/catalyst processes. The observed impact of bromide ion presence on the efficacy of AOP processes, alongside the AOP method under scrutiny, is contingent upon various factors such as the nature of the target pollutant, catalyst type, and bromide ion concentration. These considerations are crucial in selecting the best method for removing specific pollutants under defined conditions. Challenges were encountered during result analysis included variations in experimental setups, disparities in pollutant types and concentrations, and inconsistencies in reporting AOP performance metrics. Addressing these parameters in research reports will enhance the coherence and utility of subsequent systematic reviews.

Biodegradation and Decolorization of Crystal Violet Dye by Cocultivation with Fungi and Bacteria

Microbial degradation of dyes is vital to understanding the fate of dyes in the environment. In this study, a fungal strain A-3 and a bacterial strain L-6, which were identified as Aspergillus fumigatus and Pseudomonas fluorescens, respectively, had been proven to efficiently degrade crystal violet (CV) dye. The decolorization of CV dye by fungal and bacterial cocultivation was investigated. The results showed that the decolorization rate of cocultures was better than monoculture (P. fluorescens in L-6 (PF), and that of A. fumigatus A-3 (AF)). Furthermore, enzymatic analysis further revealed that Lac, MnP, Lip, and NADH-DCIP reductases were involved in the biodegradation of CV dyes. UV-visible spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, and gas chromatography-mass spectrometry (GC-MS) were used to examine the degradation products. GC-MS analysis showed the presence of 4-(dimethylamino) benzophenone, 3-dimethylaminophenol, benzyl alcohol, and benzaldehyde, indicating that CV was degraded into simpler compounds. The phytotoxicity tests revealed that CV degradation products were less toxic than the parent compounds, indicating that the cocultures detoxified CV dyes. As a result, the cocultures are likely to have a wide range of applications in the bioremediation of CV dyes.

Acetylacetone effectively controlled the secondary metabolites of Microcystis aeruginosa under simulated sunlight irradiation

Inactivation of cyanobacterial cells and simultaneous control of secondary metabolites is of significant necessity for the treatment of cyanobacteria-laden water. Acetylacetone (AcAc) has been reported a specific algicide to inactivate Microcystis aeruginosa (M. aeruginosa) and an effective light activator to degrade pollutants. This study systematically investigated the photodegradation ability of AcAc under xenon (Xe) irradiation on the secondary metabolites of M. aeruginosa, mainly algal organic matter (AOM), especially toxic microcystin-LR (MC-LR). Results showed that AcAc outperformed H2O2 in destructing the protein-like substances, humic acid-like matters, aromatic proteins and fulvic-like substances of AOM. For MC-LR (250 µg/L), 0.05 mmol/L AcAc attained the same degradation efficiency (87.0%) as 0.1 mmol/L H2O2. The degradation mechanism of Xe/AcAc might involve photo-induced energy/electron transfer and formation of carbon center radicals. Alkaline conditions (pH > 9.0) were detrimental to the photoactivity of AcAc, corresponding to the observed degradation rate constant (k1 value) of MC-LR drastically decreasing to 0.0013 min-1 as solution pH exceeded 9.0. The PO43- and HCO3- ions had obvious inhibition effects, whereas NO3- slightly improved k1 value from 0.0277 min-1 to 0.0321 min-1. The presence of AOM did not significantly inhibit MC-LR degradation in Xe/AcAc system. In addition, the biological toxicity of MC-LR was greatly reduced after photoreaction. These results demonstrated that AcAc was an alternative algicidal agent to effectively inactivate algal cells and simultaneously control the secondary metabolites after cell lysis. Nevertheless, the concentration and irradiation conditions should be further optimized in practical application.

SCC-UEFAS, an urban-ecological-feature based assessment system for sponge city construction

An effective sponge city construction evaluation system plays a crucial role in evaluating sponge city construction schemes. The construction of a sponge city evaluation system still faces challenges related to incomplete index selection and unscientific weight division. Limited studies have focused on the comprehensive assessment of sponge city construction in the early stages. This study constructed a scientific assessment indicator system and a quantitative indicator weight at all levels by literature review and statistical analysis methods from an objective perspective. To demonstrate how to utilize our evaluation methods, three construction schemes randomly generated by MATLAB were evaluated under evaluation states of constant weight and variable weight, respectively. Scheme 3 had the highest score of 0.638 under the constant weight assessment, but it cannot practically be the final construction scheme due to the imbalance between indicators. Compared to the constant weight assessment, a variable weight assessment can effectively balance the states of the evaluation index with changes in the decision variable. Among the three schemes, Scheme 2 is the best choice with a value of 0.0355 under variable weight evaluation due to punishment and incentives in the variable weight method. The concept of "punishing" a disadvantageous indicator and "motivating" an advantageous indicator increases the relative advantages of the indices, ultimately affecting the assessment results of schemes and leading to a more balanced state. This study provides reasonable analysis and decision-making mechanisms to support decision-making and guide the scientific selection of a construction scheme.

PEG/Sodium Tripolyphosphate-Modified Chitosan/Activated Carbon Membrane for Rhodamine B Removal

Textile dyes from wastewater effluent are highly toxic to both living species and aqueous environments. An environmentally friendly method to remove hazardous dyes from wastewater in the textile industry has been a challenge. Chitosan (CS) and activated carbon (AC) are widely used as adsorbents for dye removal. However, the poor porosity and unsatisfactory stability of CS and the unfriendly cost of AC limited their applications to be used alone as a single adsorbent. Here, we report a novel method to prepare a CS/AC membrane using PEG10000 as a porogen and sodium tripolyphosphate (TPP) as a cross-linking agent. The adsorption efficiency and reusability of the PEG/TPP-modified CS/AC membrane to remove RhB were investigated based on dynamic and static adsorption models. The results reveal that the adsorption performance of CS/AC membranes was significantly improved after the PEG/TPP modification based on the abundance macroporous structure. The modified CS/AC membrane with a 30% AC doping ratio exhibited an excellent adsorption efficiency of 91.29 and 73.91% in the dynamic and static adsorption processes, respectively. These results provide new insights into designing membranes to remove dyes from wastewater efficiently.

Key structural features that determine the selectivity of UV/acetylacetone for the degradation of aromatic pollutants when compared to UV/H2O2

Acetylacetone (AA) has proven to be a potent photo-activator for the decolorization of dyes. However, there is very limited information on the quantitative structure-activity relationship (QSAR) and the mechanisms of dye degradation by UV/AA. Herein, the photolysis of 65 aromatic compounds (dyes and dye precursors) was investigated at three pH values (4.0, 6.0, 9.0) by UV/AA and UV/H₂O₂. The obtained pseudo-first-order photodegradation rate constants (k₁) were processed using statistical analysis. The correlation between the k₁ values and the number of photons absorbed by AA, together with the observed pH effect, suggested that the protonated enol structure of AA plays a crucial role in the photodecolorization of dyes. According to quantum chemical computation, photo-induced direct electron transfer between the excited state of AA and the dye was the main mechanism in the UV/AA process. QSAR models demonstrated that the molecular size and stability were the key factors that determined the efficiency of UV/H₂O₂ for dye degradation. Statistically, the UV/AA process was target-selective and suffered less from the inner filter effect, which made it more effective than the UV/H₂O₂ process for dye degradation. The selectivity of the UV/AA process was mainly embodied in the substituent effects: dyes with hydroxyl groups in conjugated systems decomposed faster than those with nitro-substitution or ortho-substituted sulfonate groups. The results can be used for the selection of appropriate photochemical approaches for the treatment of dye-contaminated water.