Mechanistic insights into 2,4-D photoelectrocatalytic removal from water with TiO2 nanotubes under dark and solar light irradiation

Adsorption of 2,4-dichlorophenoxyacetic acid and glyphosate from water by Fe3O4-UiO-66-NH2 obtained in a simple green way

In this study, a green adsorbent (Fe₃O₄-UiO-66-NH₂) with the ability of addressing the issues of separation and recovery of UiO-66-NH₂ is obtained using a simple co-precipitation method under environmentally benign conditions. Various characterization techniques are utilized for evaluating the properties of the developed adsorbent. The capability of Fe₃O₄-UiO-66-NH₂ towards 2,4-dichlorophenoxyacetic acid (2,4-D) and glyphosate (GP) from solution is explored. The results revealed that the magnetization process did not destroy the crystal structure of UiO-66-NH₂, which ensured that Fe₃O₄-UiO-66-NH₂ had good adsorption performance for 2,4-D and GP. The adsorption processes showed a wide pH application range, high salt tolerance, and regeneration performance as well as an excellent adsorption rate. Results from thermodynamic study showed that both processes were spontaneous and endothermic. The unit uptake ability of Fe₃O₄-UiO-66-NH₂ for 2,4-D and GP reached up to 249 mg·g^-1 and 183 mg·g^-1 from Langmuir model at 303 K, respectively. When solid-liquid ratio was 2 g·L^-1, Fe₃O₄-UiO-66-NH₂ can reduce the content of 2,4-D or GP with the initial density of 100 mg·L^-1 below the drinking water requirement limit. In addition, the reusability efficiency of Fe₃O₄-UiO-66-NH₂ towards 2,4-D and GP was found to be 86% and 80% using 5 mmol·L^-1 NaOH as eluent. Analysis of simulated water samples indicated that Fe₃O₄-UiO-66-NH₂ could achieve the single or simultaneous removal of 2,4-D and GP from wastewater. Summarily, Fe₃O₄-UiO-66-NH₂ as a green adsorbent can serve as an alternative for removing 2,4-D and GP from water body.

Microbial degradation of organochlorine pesticide: 2,4-Dichlorophenoxyacetic acid by axenic and mixed consortium

The presence of 2,4-dichlorophenoxyacetic acid (2,4-D), an organochlorine herbicide, in the environment has raised public concern as it poses hazard to both humans and the ecosystem. Three potential strains having the capability to degrade 2,4-D were isolated from on site agricultural soil and identified as Arthrobacter sp. SVMIICT25, Sphingomonas sp. SVMIICT11 and Stenotrophomonas sp. SVMIICT13. Over 12 days of incubation, 81-90% of 100 mg/L of 2,4-D degradation was observed at 2% inoculum. A shorter lag phase with 80% of degradation efficiency was observed within 5 days when the inoculum size was increased to 10%. Six microbial consortia were prepared by combining the isolates along with in-house strains, Bacillus sp. and Pseudomonas sp. Consortia R3 (Arthrobacter sp. + Sphingomonas sp.), operated with 10% of inoculum, showed 85-90% degradation within 4 days and 98-100% in 9 days. Further, targeted exo-metabolite analysis confirmed the presence and catabolism of intermediate 2,4-dichlorophenol and 4-chlorophenol compounds.

Construction of a novel Cu1.8S/NH2-La MOFs decorated Black-TNTs photoanode electrode for high-efficiently photoelectrocatalytic degradation of 2, 4-dichlorophenol

Photoelectrocatalysis (PEC) has long been regarded as an efficient and green method to eliminate various organic pollutants from wastewater. However, the lack of highly photoelectrocatalytic active and stable electrodes limits the development of the PEC technologies. Herein, a novel hierarchical photo-electrode with hollow Cu_1.8S/NH₂-La MOFs decorated black titanium dioxide nanotubes (Cu_1.8S/NH₂-La MOFs/Black TNTs) was fabricated by a two-step water-heating method. The prepared photoelectrode was used to degradation of 2, 4-dichlorophenol (2, 4-DCP). Analysis of photoelectrocatalytic degradation process of 2, 4-DCP was evaluated using UV-Vis absorption spectroscopy and the main degradation paths were analyzed by LC-MS. The results showed that 99.3% of the pollutant could be rapidly degraded within 180 min. Furthermore, the Cu_1.8S/NH₂-La MOFs/Black TNTs photoelectric pole exhibited excellent stability after 15 cycling experiments.

The state-of-the-art development of photocatalysts for the degradation of persistent herbicides in wastewater

Herbicides are one of the most recurring pollutants in the aquatic system due to their widespread usage in the agriculture sector for weed control. Semiconductor-based photocatalysts have gained recognition due to their ability to degrade and mineralize pollutants into harmless by-products completely. Lately, many studies have been done to design photocatalysts with efficient separation of photogenerated charge carriers and enhanced light absorption. Photocatalyst engineering through doping with metal and non-metal elements and the formation of heterojunction are proven effective for minimizing the recombination of electron-hole pairs and enlarging the absorption in the visible light region. This review focuses on discussing and evaluating the recent progress in the types of photocatalysts and their performance in the remediation of herbicides in wastewater. The development of innovative hybrid technologies is also highlighted. The limitations and challenges of photocatalysis technology in the present literature have been identified, and future studies are recommended.

Engineering hierarchical FeS2/TiO2 nanotubes on Ti mesh as a tailorable flow-through catalyst belt for all-day-active degradation of organic pollutants and pathogens

The increasing organic and microbiological pollutions in fresh water caused by human activities and industrial development have become a global concern nowadays. In this study, three-dimensional (3D) hierarchical FeS₂/TiO₂ structures with nanotube geometries were grown on a Ti mesh (M-TNTAs-FeS₂). Benefitting from the abundant available reactive sites on the open 3D micro/nanoporous structures, excellent photocatalytic activity of FeS₂/TiO₂ heterostructure in solar light, and satisfactory Fenton activity of FeS₂, the obtained M-TNTAs-FeS₂ exhibits outstanding performance as an all-day-active catalyst. Importantly, flexible meshes can be easily tailored and enveloped into fluorinated ethylene propylene (FEP) pockets in a series as a flow-through belt for large-capacitance applications (998 L m^-2 at a flow rate of 417 L m^-2 h^-1 for a four-pockets belt), as indicated by the degradation of azo dyes, antibiotics, pesticides, and pathogens. This study may inspire a new tailorable catalyst design for a promising point-of-use purification device.

Effect of Potential and Chlorides on Photoelectrochemical Removal of Diethyl Phthalate from Water

Removal of persistent pollutants from water by photoelectrocatalysis has emerged as a promising powerful process. Applied potential plays a key role in the photocatalytic activity of the semi-conductor as well as the possible presence of chloride ions in the solution. This work aims to investigate these effects on the photoelectrocatalytic oxidation of diethyl phthalate (DEP) by using TiO2 nanotubular anodes under solar light irradiation. PEC tests were performed at constant potentials under different concentration of NaCl. The process is able to remove DEP following a pseudo-first order kinetics: values of kapp of 1.25 × 10−3 min−1 and 1.56 × 10−4 min−1 have been obtained at applied potentials of 1.8 and 0.2 V, respectively. Results showed that, depending on the applied potential, the presence of chloride ions in the solution affects the degradation rate resulting in a negative effect: the presence of 500 mM of Cl− reduces the value of kapp by 50 and 80% at 0.2 and 1.8 V respectively.