Aggregation-induced emission luminogen@manganese dioxide core-shell nanomaterial-based paper analytical device for equipment-free and visual detection of organophosphorus pesticide

Nanozyme coating-gated multifunctional COF composite based dual-ratio enhanced dual-mode sensor for highly sensitive and reliable detection of organophosphorus pesticides in real samples

The reliable detection of organophosphorus pesticides (OPs) in complex matrices remains an enormous challenge due to inevitable interference of sample matrices and testing factors. To address this issue, we designed a nanozyme-coated mesoporous COF with guest molecule loading, and successfully used it to construct a dual-ratio dual-mode sensor through target-regulated signal generation. The multifunctional COF-based composite (MB/COF@MnO2, MCM) featured high loading of methylene blue (MB), oxidase-like MnO2 coatings as gatekeepers, and specific recognition of thiocholine (TCh). TCh, a regulator produced from acetylcholinesterase (AChE)-catalyzed hydrolysis of acetylthiocholine, could decompose MnO2 coatings, triggering the release of abundant MB and oxidation of few o-phenylenediamine (OPD). OPs, strong inhibitors of AChE, could restrain TCh production and MnO2 decomposition, thereby controlling the release of less MB and oxidation of more OPD. This regulation boosted the dual-ratio dual-mode assay of OPs by using the released MB and oxidized OPD in the solution as testing signals, measured by both fluorescent and electrochemical methods. Experimental results demonstrated the sensitive detection of dichlorvos with LODs of 0.083 and 0.026 ng/mL via the fluorescent/electrochemical mode, respectively. This study represented a creative endeavor to develop dual-ratio dual-mode sensors for OPs detection in complex samples, offering high sensitivity, excellent selectivity, and good reliability.

Rapid Detection of Methyl Parathion Based on SiONPs-Eu3+ Dual-Emitting Fluoroprobe and Its On-Site Application

Herein, we pioneered an innovative methodology for the rapid identification and quantitation of methyl parathion (MP) residues, overcoming the drawbacks of existing methods such as poor selectivity, high costs, and intricate operational procedures. A dual-emitting fluoroprobe SiONPs-Eu3+ was engineered based on silica oxide nanoparticles (SiONPs) conjugated with Eu3+, and the synthetic conditions were meticulously optimized to ensure exceptional sensitivity and selectivity to 4-nitrophenol (4-NP), one of the MP hydrolytic products. Upon excitation at 317 nm, the blue fluorescence of SiONPs at 400 nm was quenched, while the red fluorescence of Eu3+ at 616 nm remained nearly unchanged, constituting a ratiometric fluorescent change that significantly enhanced the detection stability. The fluoroprobe rapidly detected 4-NP at concentrations below 80 μM within 10 s and gave a limit of detection (LOD) as low as 0.16 μM, markedly lower than the allowable residue limit of MP in China food safety standards. Also, it exhibited excellent anti-interference properties in complex matrices, remaining unaffected by common amino acids, cations, and pesticides. The underlying mechanism of the fluoroprobe was elucidated through time-dependent density functional theory (TD-DFT) calculations. Under optimized hydrolysis conditions, the detection of MP in real rice samples was successfully achieved. Furthermore, the self-developed and dual-channel portable device was conducive to on-site fluorescence detection of 4-NP, offering enhanced stability in contrast to traditional photography-based methods.

Recent advances in emerging nanozymes with aggregation-induced emission

AIE luminogens (AIEgens) are a class of unique fluorescent molecules that exhibit significantly enhanced luminescence properties and excellent photostability in the aggregated state. Recently, it has been found that some AIEgens can produce reactive oxygen species, which means that they may have potential enzyme-like activities and are thus termed "AIEzymes". Consequently, the discovery and design of novel AIEgens with enzyme-like properties have emerged as a new and exciting research direction. Additionally, AIEgens can enhance the catalytic efficiency of traditional nanozymes by direct combination, thereby endowing the nanozymes with multifunctionality. In this regard, nanozymes with aggregation-induced emission (AIE) properties, which represents a win-win integration, not only take full advantage of the low cost and stability of nanozymes, but also incorporate the excellent biocompatibility and fluorescence properties of AIEgens. These synergistic compounds bring about new opportunities for various applications, making AIEzymes of interest in biomedical research, food analysis, environmental monitoring, and especially imaging-guided diagnostics. This review will provide an overview of the latest strategies and achievements in the rational design and preparation of AIEzymes, as well as current research trends, future challenges and prospective solutions. We expect that this work will encourage and motivate more people to study and explore AIEzymes to further promote their applications in various fields.

Eu-MOF based fluorescence probe for ratiometric and visualization detection of Cu2

Water contamination caused by heavy metals represents an urgent global issue. Cu2+, a potential trace heavy metal pollutant, can accumulate in the human body through the food chain, leading to excessive levels that give rise to diverse health complications. Hence, in this investigation, a novel and efficacious fluorescent probe named Eu-BTB was developed for the detection of Cu2+, employing 1,3,5-triphenyl(4-carboxyphenyl) (H3BTB) as the ligand and Eu3+ as the metallic framework. The probe demonstrates exceptional fluorescence characteristics. The interaction between the probe ligand BTB and Eu3+ triggers an antenna effect, heightening the emission efficiency of Eu3+ while preserving its intrinsic emission. The introduction of Cu2+ competes with BTB for binding, thus quelling the antenna effect and inducing a fluorescence alteration. Within the concentration range of 0.05-10 μM, the fluorescence intensity-to-Cu2+ concentration ratio exhibits a robust linear correlation, with a remarkably low detection limit of 10 nM and a rapid response time of 3 min. The fluorescent probe has been effectively deployed for the detection of copper ions in water across diverse environmental conditions, with the obtained outcomes being validated via the conventional approach of inductively coupled plasma mass spectrometry (ICP-MS). The Eu-BTB probe showcases the advantages of simplicity, swiftness, and broad applicability, thus affirming its potential for the prompt and accurate detection of Cu2+ in diverse environmental water samples.

Enzyme-mediated Ru@UiO-66@MnO2 NSs/thiamine-based ratiometric fluorescence sensor for visual detection of organophosphorus pesticide residues

In view of the potential hazards of organophosphorus pesticides (OPs), this paper constructed a ratiometric fluorescent probe utilizing a functionalized metal-organic framework to detect OPs. Ru(bpy)3Cl2 was encapsulated inside UiO-66 as a reference signal, and MnO2 nanosheets (MnO2 NSs) were grown on the surface to obtain Ru@UiO-66@MnO2 NSs. Acetylcholinesterase catalyzed the decomposition of acetylcholine into reductive thiocholine, which consumed MnO2 NSs, thus restoring the Ru@UiO-66 fluorescence. Due to the enzymatic inhibition of OPs and the redox reaction between MnO2 NSs and thiamine, this probe emitted blue fluorescence in the presence of OPs. The probe achieved linear responses to dichlorvos and chlorpyrifos with LODs of 9.99 × 10-6 μg mL-1 and 9.99 × 10-5 μg mL-1. The probe exhibited a satisfactory recovery rate for OPs in green tea. Furthermore, a hydrogel detection platform was developed by embedding the probe into sodium alginate. Overall, this work provides a visual approach to detect OPs in agricultural products.

Illuminating the path: aggregation-induced emission for food contaminants detection

Food safety is a global concern that deeply affects human health. To ensure the profitability of the food industry and consumer safety, there is an urgent need to develop rapid, sensitive, accurate, and cost-effective detection methods for food contaminants. Recently, the Aggregation-Induced Emission (AIE) has been successfully used to detect food contaminants. AIEgens, fluorescent dyes that cause AIE, have several valuable properties including high quantum yields, photostability, and large Stokes shifts. This review provides a detailed introduction to the principles and advantages of AIE-triggered detection, followed by a focus on the past five years' applications of AIE in detecting various food contaminants including pesticides, veterinary drugs, mycotoxins, food additives, ions, pathogens, and biogenic amines. Each detection principle and component is comprehensively covered and explained. Moreover, the similarities and differences among different types of food contaminants are summarized, aiming to inspire future researchers. Finally, this review concludes with a discussion of the prospects for incorporating AIEgens more effectively into the detection of food contaminants.

A dual-emission ratiometric fluorescence strategy with enzyme-based inhibition for organophosphorus pesticides determination

A fast, eco-friendly and accurate ratiometric fluorescent strategy is presented for the determination of organophosphorus pesticides (OPs) using intrinsic dual-emission silica nanoparticles modified with Rhodamine 6G (SiNPs-Rho6G). SiNPs-Rho6G had intrinsic dual-emission at 410 and 550 nm. The substrate acetylcholine was catalyzed by acetylcholinesterase (AChE) to produce thiocholine (TCh). TCh triggered the specific reaction of Ellman's reagent 5, 5-dithiobis (2-nitrobenzoic acid) to obtain 5-thio-2-nitrobenzoic acid, which caused the decrease in fluorescence intensity of SiNPs-Rho6G at 410 nm by the inner filter effect, while the fluorescence intensity of SiNPs-Rho6G at 550 nm was not significantly changed. OPs caused the recovery of the fluorescence at 410 nm by inhibiting the activity of AChE. Thus, the quantitative detection of OPs could be achieved through utilizing the catalytic characteristic of AChE. The linear curve from 0.010 to 0.250 μg mL^-1 with a detection limit of 7 ng mL^-1 was obtained for the determination of chlorpyrifos (Cpf). The ratiometric probe was used to detect the spiked Cpf in environmental and food samples with good recoveries. Therefore, combined with the dual emission characteristics of SiNPs-Rho6G and the specificity of the enzyme, the ratio fluorescence sensing platform has potential application prospects in OPs determinations.

Target-Responsive Metal-Organic Framework Nanosystem with Synergetic Sensitive Detection and Controllable Degradation against the Pesticide Triazophos in Contaminated Samples for Environment Assessment and Food Safety

Developing sensitive practical sensors for monitoring pesticide residues in edible foods and environmental samples is vital for food safety and environmental protection. Enzyme-inhibited biosensors offer effective alternative sensing strategies by using the inherent characteristics of pesticides. To further improve the degradation function of pesticide sensors, here, a target-triggered porphyrin metal-organic framework (MOF)-based nanosystem was designed with the synergetic bifunction of sensitive detection and controllable degradation of the triazophos pesticide. As a result of triazophos-inhibited glutathione consumption, the MOF collapsed and released the ligand porphyrin, leading to the recovery of fluorescence and photosensitization of the free porphyrin. The fluorescence recovery resulted in a sensitive detection limit of 0.6 ng mL^-1 for triazophos, which was also applied for the determination of contaminated samples and bioaccumulation in rice. Furthermore, the target-activated photocatalytic ability of porphyrin endowed the system with the ability to effectively generate reactive oxygen species for degrading triazophos with a removal rate of ∼85%, achieving eco-friendly synergetic detection and photodegradation in a controllable way. Therefore, the intelligent multifunctional MOF system demonstrated the potential of programmable systems for jointly controllable tracking and elimination of pesticide residues in the environment and opened a new avenue for designing a precise mechanism for stimulus-triggered degradation of pesticide residues accompanied by sensitive detection for environmental friendliness and food safety.

Capsulation of red emission chromophore into the CoZn ZIF as nanozymes for on-site visual cascade detection of phosphate ions, o-phenylenediamine, and benzaldehyde

Accurate on-site profiling of the pollutants is of vital significance for estimating environmental pollution. Herein, we propose a paper-based fluorescence-sensing system to precisely report the level of multiple pollutants. A high-performance fluorescence-sensor for apparatus-free and visual on-site tandem precisely reporting phosphate ions (Pi), o-phenylenediamine (OPD), and benzaldehyde (BA) levels have been fabricated successfully by introducing synthesized red emission (>600 nm) fluorescent chromophore 10-(diethylamino)-3-hydroxy-5,6-dihydrobenzo [c]xanthen-12-ium (HTD) into the environment of CoZn zeolitic imidazolate framework (CoZn ZIF) by a simple stirring method. CoZn ZIF@HTD with the bimetallic nodes not merely provided main Zn²⁺ sites for specific recognition of Pi to generate an enhanced red fluorescent optical signal, Co³⁺/Co²⁺ exhibited excellent peroxidase-like activity for the catalytic oxidation of OPD substrate in the presence of H₂O₂ resulting in color changing from red to yellow. Subsequently, the obvious yellow fading of the OPDox species took place with the addition of BA. By virtue of the sensitively visual tandem detection of Pi, OPD, and BA, the sensor can be applied to real wastewater samples. Meanwhile, this fluorescent sensor was further adopted for practical application in confocal cell imaging and security inks. Overall, this work established a fluorescent sensing system with integrated multifunctional applications for environmental and biological samples, implying the great potential for simultaneous real-time cascade detection of various important pollutants with the merit of low-cost, time-saving, and easy-to-use.

A Cationic Amphiphilic AIE Polymer for Mitochondrial Targeting and Imaging

Mitochondria are important organelles that play key roles in generating the energy needed for life and in pathways such as apoptosis. Direct targeting of antitumor drugs, such as doxorubicin (DOX), to mitochondria into cells is an effective approach for cancer therapy and inducing cancer cell death. To achieve targeted and effective delivery of antitumor drugs to tumor cells, to enhance the therapeutic effect, and to reduce the side effects during the treatment, we prepared a cationic amphiphilic polymer with aggregation-induced emission (AIE) characteristic. The polymer could be localized to mitochondria with excellent organelle targeting, and it showed good mitochondrial targeting with low toxicity. The polymer could also self-assemble into doxorubicin-loaded micelles in phosphate buffer, with a particle size of about 4.3 nm, an encapsulation rate of 11.03%, and micelle drug loading that reached 0.49%. The results of in vitro cytotoxicity experiments showed that the optimal dosage was 2.0 μg/mL, which had better inhibitory effect on tumor cells and less biological toxicity on heathy cells. Therefore, the cationic amphiphilic polymer can partially replace expensive commercial mitochondrial targeting reagents, and it can be also used as a drug loading tool to directly target mitochondria in cells for corresponding therapeutic research.

In-situ formation of MnO2 nanoparticles on Ru@SiO2 nanospheres as a fluorescent probe for sensitive and rapid detection of glutathione

Glutathione (GSH)-switched fluorescent assays have appealed much attention due to rapid signal changes of fluorescent probes. However, exposure to exterior environment of fluorescent probe causes photobleaching and premature leakage, leading to low sensitivity and poor photostability. Herein, luminescent SiO₂ nanoparticles encapsulated with Ru(bpy)₃²⁺ (Ru@SiO₂) were designed and synthesized as fluorescent probe to construct a GSH-switched fluorescent assay. The encapsulation of Ru(bpy)₃²⁺ in the SiO₂ nanoparticles could effectively prevent the leakage of Ru(bpy)₃²⁺ molecules, improving the photostability of probe. The fluorescence of Ru@SiO₂ nanoparticles was quenched by coating MnO₂ nanoparticles on Ru@SiO₂ surface (Ru@SiO₂@MnO₂ nanocomposites) through an in situ growth approach, which reduced background of the assay. The MnO₂ nanoparticles not only further inhibited the leakage of Ru(bpy)₃²⁺ molecules, but also could serve as a recognition unit of GSH. In the presence of GSH, the MnO₂ nanoparticles on the surface of Ru@SiO₂ nanoparticles were reduced to Mn²⁺, resulting the fluorescence recovery of Ru@SiO₂ nanoparticles. Thus, a signal-on fluorescent strategy was constructed for GSH detection. The assay displayed good analytical performance for GSH detection with a low detection limit of 16.2 nM due to excellent fluorescence quenching ability of MnO₂ nanoparticles and special role of Ru@SiO₂ nanoparticles to block probe leakage. The proposed assay was also applied to measure GSH levels in human serum samples. This work paves a new way to detect GSH with high sensitivity.

Carbon Dot-Anchored Cobalt Oxyhydroxide Composite-Based Hydrogel Sensor for On-Site Monitoring of Organophosphorus Pesticides

The development of a portable, quantitative, and user-friendly sensor for on-site monitoring of organophosphorus pesticides (OPs) is significantly urgent to guarantee food safety. Herein, a carbon dot/cobalt oxyhydroxide composite (CD/CoOOH)-based fluorescent hydrogel sensor is constructed for precisely quantifying OPs using a homemade portable auxiliary device. As a fluorescence signal indicator, the orange-emissive CD/CoOOH composite is encapsulated into an agarose hydrogel kit for amplifying the detection signals, shielding background interference, and enhancing stability. Acetylcholinesterase (AChE) catalyzes the hydrolysis of the substrate to produce thiocholine, which induces the decomposition of CoOOH and makes the fluorescence enhancement of the hydrogel platform possible. OPs can specifically block the AChE activity to limit thiocholine production, resulting in a decrease in platform fluorescence. The image color of the fluorescent hydrogel kit is transformed into digital information using a homemade auxiliary device, achieving on-site quantitative detection of paraoxon (model target) with a detection limit of 10 ng mL^-1. Harnessing CD/CoOOH composite signatures, hydrogel encapsulation, and portable optical devices, the proposed fluorescence hydrogel platform demonstrated high sensitivity and good anti-interference performance in agricultural sample analysis, indicating considerable potential in the on-site application.

Flexible Aggregation-Induced Emission-Active Hydrogel for On-Site Monitoring of Pesticide Degradation

Benefiting from the stimuli-responsive property and powerful loading capacity, functionalized hydrogels are favorable for the fabrication of sensing devices. Herein, we design aggregation-induced emission (AIE)-active hydrogel discs by embedding gold nanoclusters@zeolite-like imidazole framework (AuNCs@ZIF) composites in double-network hydrogels to build a sensitive pesticide biosensor. The hydrogel discs integrate an AIE effect of AuNCs, a stimuli-responsive property of ZIF, and a porous network structure of the hydrogel, which enhances the sensing sensitivity via boosting the stable fluorescent signal and antifouling performance. In conjunction with a homemade device, the fluorescence images of hydrogel discs could be transduced into data information for accurate quantification of chlorpyrifos pesticide with a detection limit of 0.2 ng/mL. The dynamic degradation of chlorpyrifos in Chinese cabbage is demonstrated to confirm the practical application of hydrogel discs. Such AIE-active hydrogel discs could be a plant health sensor for the on-site quantification of pesticide residues on crops, holding great promise for precision agriculture.

Biosensor Based on Covalent Organic Framework Immobilized Acetylcholinesterase for Ratiometric Detection of Carbaryl

A ratiometric electrochemical biosensor based on a covalent organic framework (COF_Thi-TFPB) loaded with acetylcholinesterase (AChE) was developed. First, an electroactive COF_Thi-TFPB with a two-dimensional sheet structure, positive charge and a pair of inert redox peaks was synthesized via a dehydration condensation reaction between positively charged thionine (Thi) and 1,3,5-triformylphenylbenzene (TFPB). The immobilization of AChE on the positively charged electrode surface was beneficial for maintaining its bioactivity and achieving the best catalytic effect; therefore, the positively charged COF_Thi-TFPB was an appropriate support material for AChE. Furthermore, the COF_Thi-TFPB provided a stable internal reference signal for the constructed AChE inhibition-based electrochemical biosensor to eliminate various effects which were unrelated to the detection of carbaryl. The sensor had a linear range of 2.2–60 μM with a detection limit of 0.22 μM, and exhibited satisfactory reproducibility, stability and anti-interference ability for the detection of carbaryl. This work offers a possibility for the application of COF-based materials in the detection of low-level pesticide residues.

Temperature-Responsive Covalent Organic Framework-Encapsulated Carbon Dot-Based Sensing Platform for Pyrethroid Detection via Fluorescence Response and Smartphone Readout

In this paper, carbon dot (CD)-encapsulated 1,3,5-tris(4-formylphenyl)benzene (TFB)/2,5-dihydroxyterephthalohydrazide (DHTH) covalent organic frameworks (TDCOFs) grafted with thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) (CDs@TDCOFs@PNIPAM) were fabricated for the detection of pyrethroids. CDs@TDCOFs@PNIPAM achieved a temperature-responsive "on/off" detection of pyrethroids based on the target-triggered electron-transfer mechanism. The detection limit of pyrethroids was as low as 0.69 μg/L in the wide linear range of 5-400 μg/L (R² > 0.9523). Simultaneously, CDs@TDCOFs@PNIPAM with red, green, and blue (RGB) fluorescence emissions were integrated with a smartphone-assisted device, enabling the visual smart quantitative detection of pyrethroids with a detection limit of 4.875 μg/L. Ultimately, agricultural products were chosen as actual samples to verify the applicability of both recognition modes, and the calculated recovery rate was 105.48-113.40%. Accordingly, CDs@TDCOFs@PNIPAM featuring temperature-responsive switching behavior and RGB fluorescence emission provided a promising analytical strategy for ensuring agricultural and food safety.

Design of metalloenzyme mimics based on self-assembled peptides for organophosphorus pesticides detection

Organophosphorus pesticides (OPs) detection has attracted considerable attention because of the extensive application of OPs. In this research, non-toxic and high-performance metalloenzyme mimics of Zn²⁺-bonding peptides were developed by obtaining inspiration from phosphotriesterase (PTE) and nanofiber formation. Furthermore, based on the electrochemical activity of p-nitrophenol (PNP), the electrochemical sensor of metalloenzyme mimics was developed. By examining the effect of the active sites of peptides and fibril formation on the degradation of OPs, the optimal metalloenzyme mimic was selected. Furthermore, optimal metalloenzyme mimics were combined with NiCo₂O₄ to develop an electrochemical sensor of OPs. By monitoring square wave voltammetry (SWV) signals of PNP degraded from OPs, the amounts of OPs in actual samples could be determined in 15 min. We discovered that both the active sites of α metal and β metal were required for metalloenzyme mimics; Zn²⁺ promoted peptide fibrosis and especially acted as a cofactor for degrading OPs. Compared to traditional methods, the electrochemical sensor of metalloenzyme mimics was sensitive, reliable, and non-toxic; furthermore, the detection limit of methyl paraoxon was as low as 0.08 µM. The metalloenzyme mimics will be a promising material for detecting OPs in the food industry and environment fields.

An amplified fluorescence polarization assay for sensitive sensing of organophosphorus pesticides via MnO2 nanosheets

It is highly desirable to develop a simple, efficient and sensitive strategy for organophosphorus pesticides (OPs) in both environment pollution and human health. Herein, a novel amplified fluorescence polarization (FP) biosensor was established for highly sensitive detection of OPs using MnO₂ nanosheets as the signal enhancer. In this system, OPs can suppress the activity of acetylcholinesterase (AChE) efficiently, blocking the hydrolysis reaction of acetylthiocholine (ATCh) to generate thiocholine (TCh) by AChE. TCh can lead the decomposition of MnO₂ nanosheets to manganese ions. So, without the influence of TCh, MnO₂ nanosheets can maintain its original shape and form a stable complex with FAM-DNA, which greatly enhanced the FP signal. This method can tremendously improve the sensitivity of FP with a detection limit of 0.01 ng/mL for diazinon. In addition, it was also applicable to determine other four OPs and investigate the level of diazinon in real water samples. Consequently, the proposed approach provides a new promising platform for detection of OPs and is expected to be used in application of environmental monitoring.

Background-free sensing platform for on-site detection of carbamate pesticide through upconversion nanoparticles-based hydrogel suit

On-site monitoring of carbamate pesticide in complex matrix remians as a challenge in terms of the real-time control of food safety and supervision of environmental quality. Herein, we fabricated robust upconversion nanoparticles (UCNPS)/polydopamine (PDA)-based hydrogel portable suit that precisely quantified carbaryl in complex tea samples with smartphone detector. UCNPS/PDA nanoprobe was developed by polymerization of dopamine monomers on the surface of NaErF₄: 0.5% Tm³⁺@NaYF₄ through electrostatic interaction, leading to efficient red luminescence quenching of UCNPS under near-infrared excitation, which circumvented autofluorescence and background interference in complicated environment. Such a luminescence quenching could be suppressed by thiocholine that was produced by acetylcholinesterase-mediated catalytic reaction, thus enabling carbaryl bioassay by inhibiting the activity of enzyme. Bestowed with the feasibility analysis of fluorescent output, portable platform was designed by integrating UCNPS-embedded sodium alginate hydrogel with 3D-printed smartphone device for quantitatively on-site monitoring of carbaryl in the range of 0.5-200 ng mL^-1 in tea sample, accompanied by a detection limit of 0.5 ng mL^-1. Owing to specific UCNPS signatures and hydrogel immobilization, this modular platform displayed sensitive response, portability and anti-interference capability in complex matrix analysis, thus holding great potential in point-of-care application.