An innovative, highly stable Ag/ZIF-67@GO nanocomposite with exceptional peroxymonosulfate (PMS) activation efficacy, for the destruction of chemical and microbiological contaminants under visible light

Full-Spectrum Utilization of ZIF-67/Ag NPs/NaYF4:Yb,Er Photocatalysts for Efficient Degradation of Sulfadiazine: Upconversion Mechanism and DFT Calculation

In this work, novel ternary composite ZIF-67/Ag NPs/NaYF4:Yb,Er is synthesized by solvothermal method. The photocatalytic activity of the composite is evaluated by sulfadiazine (SDZ) degradation under simulated sunlight. High elimination efficiency of the composite is 95.4% in 180 min with good reusability and stability. The active species (h+, ·O2 - and ·OH) are identified. The attack sites and degradation process of SDZ are deeply investigated based on theoretical calculation and liquid chromatography-mass spectrometry analysis. The upconversion mechanism study shows that favorable photocatalytic effectiveness is attributed to the full utilization of sunlight through the energy transfer upconversion process and fluorescence resonance energy transfer. Additionally, the composite is endowed with outstanding light-absorbing qualities and effective photogenerated electron-hole pair separation thanks to the localized surface plasmon resonance effect of Ag nanoparticles. This work can motivate further design of novel photocatalysts with upconversion luminescence performance, which are applied to the removal of sulphonamide antibiotics in the environment.

Cu/Co Bimetallic Carbon Catalyst as a Highly Efficient Promoter for Reactive Dyes Degradation with PMS

The synergistic effect between bimetallic catalysts has been confirmed as an effective method for activating persulfate (PMS). Therefore, we immobilized copper-cobalt on chitosan to prepare bimetallic carbon catalysts for PMS activation and degradation of reactive dyes. Experimental results demonstrate that the CuCo-CTs/PMS catalytic degradation system exhibits excellent degradation performance toward various types of reactive dyes (e.g., Ethyl violet, Chlortalidone, and Di chlorotriazine), with degradation rates reaching 90% within 30 min. CuCo-CTs exhibit high catalytic activity over a wide pH range of 3-11 at room temperature and under static conditions, degrading over 92% of RV5 within 60 min. ultraviolet-visible (UV-vis) spectroscopy and color changes in the dye solution confirm the effective degradation of RV5, with a degradation rate of 97.2% within 10 min. Additionally, CuCo-CTs demonstrate good stability and reusability, maintaining a degradation rate of 92.8% after eight cycles. Kinetic studies indicate that the degradation follows pseudo-first-order kinetics. Furthermore, based on the results of radical scavenging experiments, the catalytic degradation mechanism of the dye involves both radical and nonradical pathways, with 1O2 identified as the primary active species. This study provides insights and experimental evidence for the application of persulfate oxidation in the treatment of dyeing wastewater.

Advances in the Removal of Organic Pollutants from Water by Photocatalytic Activation of Persulfate: Photocatalyst Modification Strategy and Reaction Mechanism

Environmental pollution caused by persistent organic pollutants has imposed big threats to the health of human and ecological systems. The development of efficient methods to effectively degrade and remove these persistent organic pollutants is therefore of paramount importance. Photocatalytic persulfate-based advanced oxidation technologies (PS-AOTs), which depend on the highly reactive SO4 - radicals generated by the activation of PS to degrade persistent organic pollutants, have shown great promise. This work discusses the application and modification strategies of common photocatalysts in photocatalytic PS-AOTs, and compares the degradation performance of different catalysts for pollutants. Furthermore, essential elements impacting photocatalytic PS-AOTs are discussed, including the water matrix, reaction process mechanism, pollutant degradation pathway, singlet oxygen generation, and potential PS hazards. Finally, the existing issues and future challenges of photocatalytic PS-AOTs are summarized and prospected to encourage their practical application. In particular, by providing new insights into the PS-AOTs, this review sheds light on the opportunities and challenges for the development of photocatalysts with advanced features for the PS-AOTs, which will be of great interests to promote better fundamental understanding of the PS-AOTs and their practical applications.

One-pot solvothermal synthesis of Cu-Fe-MOF for efficiently activating peroxymonosulfate to degrade organic pollutants in water:Effect of electron shuttle

Persulfate-based advanced oxidation processes (PS-AOPs) show a bright prospect in sewage purification. The development of efficient catalysts with simple preparation process and eco-friendliness is the key for their applying in practical water treatment. Herein, a bimetallic Cu-Fe metal organic framework (MOF) was simply synthesized by using one-pot solvothermal methods and employed for activating peroxymonosulfate (PMS) to degrade organic pollutants in water. The Cu-Fe-MOF/PMS exhibited excellent degradation efficiencies (over 95% in 30 min) for a variety of pollutants, including phenol, bisphenol A, 2,4-dichlorophenol, methyl blue, rhodamine B, tetracycline and sulfamethoxazole. The degradation efficiency was impacted by dosages of Cu-Fe-MOF, PMS concentrations, reaction temperature, solution pH and anionic species. Phenol could be efficiently decomposed in a wide pH range of 5-9, with the highest degradation and mineralization efficiency of nearly 100% and 70%, respectively. Free radicals and non-free radicals participated in degrading of phenol at the same time, with dominantly free radical process, because sulfate radicals (SO4·-) and hydroxyl radicals (·OH) were the primary active substances by contribution calculation. Cu-Fe-MOF was acted as electron shuttle between molecules of phenol and PMS, and the cooperation effect of Fe and Cu on the Cu-Fe-MOF promoted the electron transfer, achieving the high degradation efficiency of phenol. Thus, Cu-Fe-MOF is an ideal catalyst for activating PMS, which is conducive to promote the applying of catalyst-activated PMS processes for practical wastewater treatments.

Ultrasonic-assisted synthesis of lignin-based ultrasmall silver nanoparticles for photothermal-mediated sterilization

Lignin-based silver nanoparticles have been considered a promising antimicrobial material. However, it remains challenging to prepare ultra-small size silver nanoparticles sustainably with superior antibacterial performance. In this work, we modified ethanol-extracted lignin (EL) with carboxymethyl groups and further synthesized ultra-small particle size (3.8 ± 0.1 nm) nanosilver incorporated carboxymethyl lignin complexes (AgNPs@CEL) using ultrasonic technology. Due to the outstanding antibacterial properties of the ultra-small size nanosilver, AgNPs@CEL could cause 5.3 and 5.4 log10 CFU/mL reduction against E. coli and S. aureus in 5 min. Meanwhile, AgNPs@CEL exhibited remarkable photothermal antibacterial performance, which caused 6.2 and 6.1 log10 CFU/mL reduction of E. coli and S. aureus, with NIR irradiation for 5 min. Furthermore, the composite films prepared by doping only 0.5 wt% AgNPs@CEL into ethyl cellose could achieve a bactericidal rate more than 99.99 %. This study provides a new insight into design of controlled particle size lignin-based antibacterial nanosilver materials in a sustainable manner and holds promise for applications in antibacterial fields.

Highly effective degradation of ibuprofen by alkaline metal-doped copper oxides via peroxymonosulfate activation: Mechanisms, degradation pathway and toxicity assessments

Redox ratios of Cu2+/Cu+ and adsorbed oxygen species (Oads) have shown great activity toward radical generation by activating peroxymonosulfate (PMS). Herein, different alkaline metal oxides (CaO, MgO and BaO) and various amounts of CaO are incorporated into CuO, which could tune the main active sites of redox ratios of Cu2+/Cu+ and Oads. The results show that CaO-CuO-5% exhibits the outstanding performance of PMS activation toward ibuprofen (IBF) degradation with excellent kinetics (k = 0.812 min-1). The X-ray absorption spectroscopy (XAS) and density functional theory (DFT) calculation show that the CaO-CuO-5% has the higher electron density with superior electron transfer ability and lower PMS adsorption energy. Based on radical scavengers and electron paramagnetic resonance spectrometer (EPR), a nonradical process is proposed to play the dominant role. The degradation pathway and the corresponding toxicity of degraded intermediates with residue PMS after reaction is evaluated by LC-MS/MS and bioassay experiments, indicating the lower antagonistic influence on human hormone receptors after advanced oxidation process. Mitigation of the Cu leaching with cyclic stability can be achieved. This study provides a facile method to optimize high-performance catalysts to activate PMS and offer practical environmental applications in the remediation of emerging contaminants.

Role of Interface of Metal-Organic Frameworks and Their Composites in Persulfate-Based Advanced Oxidation Process for Water Purification

The persulfate activation-based advanced oxidation process (PS-AOP) is an important technology in wastewater purification. Using metal-organic frameworks (MOFs) as heterogeneous catalysts in the PS-AOP showed good application potential. Considering the intrinsic advantages and disadvantages of MOF materials, combining MOFs with other functional materials has also shown excellent PS activation performance and even achieves certain functional expansion. This Review introduces the classification of MOFs and MOF-based composites and the latest progress of their application in PS-AOP systems. The relevant activation/degradation mechanisms are summarized and discussed. Moreover, the importance of catalyst-related interfacial interaction for developing and optimizing advanced oxidation systems is emphasized. Then, the interference behavior of environmental parameters on the interfacial reaction is analyzed. Specifically, the initial solution pH and coexisting inorganic anions may hinder the interfacial reaction process via the consumption of reactive oxygen species, affecting the activation/degradation process. This Review aims to explore and summarize the interfacial mechanism of MOF-based catalysts in the activation of PS. Hopefully, it will inspire researchers to develop new AOP strategies with more application prospects.

Enhanced Degradation of Levofloxacin through Visible-Light-Driven Peroxymonosulfate Activation over CuInS2/g-C3N4 Heterojunctions

In this work, the heterojunctions of CuInS2 embedded in the g-C3N4 materials (xCuInS2/g-C3N4, abbreviated as xCIS/GCN) was successfully prepared for peroxymonosulfate (PMS) activation under visible light. The catalysts are characterized by different techniques, such as XRD, FTIR, SEM, TEM, and UV-vis. The unique heterojunction composites can suppress the recombination of photogenerated pairs. The catalytic results showed that the 3CIS/GCN exhibited excellent catalytic levofloxacin (LVF) degradation efficiency, while more than 98.9% of LVF was removed in 60 min over a wide pH range. SO4•-, O2•-, OH•, and 1O2 were verified as the main reactive species for LVF degradation via the quenching experiments and electron paramagnetic resonance technology (EPR). The synergetic effect of xCIS/GCN, PMS, and visible light irradiation was discussed. The possible LVF degradation pathway was proposed through byproducts analysis (LC-MS). Moreover, the 3CIS/GCN/vis-PMS system has very low metal leaching. Owing to xCIS/GCN having good properties for PMS activation, it has potential applications for LVF or other hazardous pollutants degradation.

Efficient and sustainable photocatalytic inactivation of E. coli by an innovative immobilized Ag/TiO2 photocatalyst with peroxymonosulfate (PMS) under visible light

A novel catalytic system for effective photocatalytic inactivation of Escherichia coli (E. coli) was constructed by anchoring Ag nanoparticles (AgNPs) on silane coupling agent (SCA) pretreated TiO2 nano-tube arrays (Ag/SCA/TiO2NTAs). Morphology and structural analyses revealed that SCA could disperse AgNPs evenly on TiO2NTAs, thus inducing a superior surface plasmon resonance (SPR) effect. Ag/SCA/TiO2NTAs catalyst exhibited excellent inactivation performance when in the presence of peroxymonosulfate (PMS) and visible light (VL), with 6-log E. coli was completely inactivated within 60 min, which was 5.3, 12.5 and 13.2 times higher than that of Ag/SCA/TiO2NTAs/VL, PMS/VL and Ag/SCA/TiO2NTAs/PMS/dark systems, respectively. Additionally, the photocatalyst exhibited a highly reusable property, with the inactivation performance almost unchanged after ten cycles of uses with minimal Ag leaching. The inactivation mechanism analysis demonstrated that both radical (SO4•-, OH) and non-radical (h+, 1O2) pathways involved in E. coli inactivation, and SCA played a pivotal role in the production of reactive species. Chloride ions (Cl-) greatly enhanced the inactivation efficiency, while bicarbonate (HCO3-) and phosphate (H2PO4-) showed an inhibitory effect. Humic acid (HA) displayed a dual effect on inactivation performance, where the low concentration of HA facilitated the bacteria inactivation, while the higher dose suppressed bacteria inactivation. Moreover, the system exhibited excellent inactivation performance in tap water. This work first used SCA as the binder to fix AgNPs on TiO2NTAs for VL photocatalytic inactivation of bacteria with the assistance of PMS, which was expected to provide some insights into the practical treatment of drinking water.

Photocatalytic Antimicrobials: Principles, Design Strategies, and Applications

Nowadays, the increasing emergence of antibiotic-resistant pathogenic microorganisms requires the search for alternative methods that do not cause drug resistance. Phototherapy strategies (PTs) based on the photoresponsive materials have become a new trend in the inactivation of pathogenic microorganisms due to their spatiotemporal controllability and negligible side effects. Among those phototherapy strategies, photocatalytic antimicrobial therapy (PCAT) has emerged as an effective and promising antimicrobial strategy in recent years. In the process of photocatalytic treatment, photocatalytic materials are excited by different wavelengths of lights to produce reactive oxygen species (ROS) or other toxic species for the killing of various pathogenic microbes, such as bacteria, viruses, fungi, parasites, and algae. Therefore, this review timely summarizes the latest progress in the PCAT field, with emphasis on the development of various photocatalytic antimicrobials (PCAMs), the underlying antimicrobial mechanisms, the design strategies, and the multiple practical antimicrobial applications in local infections therapy, personal protective equipment, water purification, antimicrobial coatings, wound dressings, food safety, antibacterial textiles, and air purification. Meanwhile, we also present the challenges and perspectives of widespread practical implementation of PCAT as antimicrobial therapeutics. We hope that as a result of this review, PCAT will flourish and become an effective weapon against pathogenic microorganisms and antibiotic resistance.

Construction of carbon nitride/zeolitic imidazolate framework-67 heterojunctions on carbon fiber cloth as the photocatalyst for various pollutants removal and hydrogen production

With the macroscale and conductive carbon fiber cloth (CFC) as the substrate, the obtained self-supported photocatalysts hold great promise for enhancing the separation of generated carriers and the recyclability of catalysts, thereby improving the photocatalytic performance and practicality in various applications. Additionally, decorating metal-organic frameworks (MOFs) with ultrahigh surface area on the surface of effective semiconductors is a promising method to enhance the adsorption capacity and photocatalytic performance. Herein, zeolitic imidazolate framework-67 (ZIF-67) as a typical MOFs was applied to modify carbon nitride (C3N4) on the surface of macroscale and conductive CFC. CFC/C3N4/ZIF-67 (4 × 4 cm2) was obtained by a thermal condensation-chemical bath deposition two-step route, and it shows superior adsorption and photocatalytic activity toward bisphenol A (BPA), levofloxacin (LVFX), ciprofloxacin (CIP) and good hydrogen evolution activity. Besides, the recycling test for four cycles indicates the high stability of CFC/C3N4/ZIF-67 with an easy recycling process. In this study, CFC/C3N4/ZIF-67 was prepared through the hydrothermal and chemical bath deposition two-step method, which enhances light absorption and photocatalytic performance, as well as recyclability for solving environmental and energy issues.

Graphene-based photocatalysts for degradation of organic pollution

Compared with the traditional wastewater treatment technology, semiconductor photocatalysis is a rapidly emerging environment-friendly and efficient Advanced Oxidation Process for degradation of refractory organic contaminants. Single-component semiconductor photocatalysts exhibit poor photocatalytic performance and cannot meet the requirements of wastewater treatment. The combination of semiconductor photocatalysts and Graphene can effectively improve the photocatalytic activity and stability of semiconductor photocatalysts. This review focuses on the synergistic effect of several types of semiconductors with Graphene for photocatalytic degradation of organic pollutants. After a brief introduction of the photodegradation mechanism of semiconductor materials and the basic description of Graphene, the synthesis, characterization and degradation performance of various Graphene-based semiconductor photocatalysts are emphatically introduced.

One-pot synthesis of bimetallic Fe-Cu metal-organic frameworks composite for the elimination of organic pollutants via peroxymonosulphate activation

A series of bimetallic of FeCu metal-organic frameworks (MOFs) have been synthesised using a solvothermal process by varying the ratio between the two metals. Further, the bimetallic MOF catalysts were characterised by X-ray powder diffraction, scanning electron microscopy, and infrared spectroscopy techniques. Their catalytic properties for activation of peroxymonosulphate (PMS) have been tested by the removal of a model dye, rhodamine B. As a result, NH2-Fe2.4Cu1-MOF demonstrated the highest degradation, the effect of the ratio NH2-Fe2.4Cu1-MOF/PMS has been studied, and the main reactive species have been assessed. The application of these MOFs in powder form is difficult to handle in successive batch or flow systems. Thus, this study assessed the feasibility of growing NH2-Fe2,4Cu1-MOF on polyacrylonitrile (PAN) spheres using the one-pot solvothermal synthesis method. The optimisation of the catalytic activity of the synthesised composite (NH2-Fe2.4Cu1-MOF@PAN) has been evaluated by response surface methodology using a central composite face-centred experimental design matrix and selecting as independent variables: time, PMS concentration, and catalyst dosage. Based on the results, the optimisation of the operational conditions has been validated. At 2.5 mM PMS, 90 min, and 1.19 g·L-1 of catalyst dosage, maximum degradation (80.92%) has been achieved, which doubles the removal values obtained in previous studies with other MOFs. In addition, under these conditions, the catalyst has been proven to maintain its activity and stability for several cycles without activity loss.

Structure of a novel Co-based heterogeneous catalyst via Mn3(PO4)2 as a carrier to efficiently activate peroxymonosulfate for improving degradation of sulfonamides

Effective degradation of sulfonamides (SAs) in water is of global importance for decreasing its pathogenicity and bioaccumulation. In this study, Mn₃(PO₄)₂ was used as a carrier to fabricate a novel and high-efficient catalyst with Co₃O₄ anchored (Co₃O₄@Mn₃(PO₄)₂) for the activation of peroxymonosulfate (PMS) to degrade SAs. Surprisingly, the catalyst exhibited superior performance, and nearly 100% of SAs (10 mg L^-1) including sulfamethazine (SMZ), sulfadimethoxine (SDM), sulfamethoxazole (SMX), and sulfisoxazole (SIZ) was degraded by Co₃O₄@Mn₃(PO₄)₂-activated PMS within 10 min. A series of characterization of the Co₃O₄@Mn₃(PO₄)₂ composite were conducted and the main operational parameters of SMZ degradation were investigated. SO₄^•-, •OH, and ¹O₂ were determined to be the dominating reactive oxygen species (ROS) responsible for the degradation of SMZ. Co₃O₄@Mn₃(PO₄)₂ also exhibited excellent stability and the removal rate of SMZ still maintained over 99% even in the fifth cycle. The plausible pathways and mechanisms of SMZ degradation in the system of Co₃O₄@Mn₃(PO₄)₂/PMS were deduced on the basis of the analyses of LCMS/MS and XPS. This is the first report on high-efficient heterogeneous activating PMS by mooring Co₃O₄ on Mn₃(PO₄)₂ to degrade SAs, which provides us with a strategy to structure novel bimetallic catalysts for PMS activation.

Adsorption of amphetamine on deep eutectic solvents functionalized graphene oxide/metal-organic framework nanocomposite: Elucidation of hydrogen bonding and DFT studies

The efficient and selective removal of amphetamine (AMP) from water bodies is significant for environmental remediation. In this study, a novel strategy for screening deep eutectic solvent (DES) functional monomers was proposed based on density functional theory (DFT) calculations. Using magnetic GO/ZIF-67 (ZMG) as substrates, three DES-functionalized adsorbents (ZMG-BA, ZMG-FA, and ZMG-PA) were successfully synthesized. The isothermal results showed that the DES-functionalized materials introduced more adsorption sites and mainly contributed to the formation of hydrogen bonds. The order of the maximum adsorption capacity (Q_m) was as follows: ZMG-BA (732.110 μg⋅g^-1) > ZMG-FA (636.518 μg⋅g^-1) > ZMG-PA (564.618 μg⋅g^-1) > ZMG (489.913 μg⋅g^-1). The adsorption rate of AMP on ZMG-BA was the highest (98.1%) at pH 11, which could be explained by the less protonation of -NH₂ from AMP being more favorable for forming hydrogen bonds with the -COOH of ZMG-BA. The strongest affinity of the -COOH of ZMG-BA for AMP was reflected in the most hydrogen bonds and the shortest bond length. The hydrogen bonding adsorption mechanism was fully explained by experimental characterization (FT-IR, XPS) and DFT calculations. Frontier Molecular Orbital (FMO) calculations showed that ZMG-BA had the lowest HOMO-LUMO energy gap (E_gap), the highest chemical activity and the best adsorption capability. The experimental results agreed with the results of theoretical calculations, proving the validity of the functional monomer screening method. This research offered fresh suggestions for the functionalized modification of carbon nanomaterials to achieve effective and selective adsorption for psychoactive substances.

A novel scheme to improve the photo-Fenton performance of iron oxychloride by carbon: Three existent states and roles of carbon in the degradation of tetracycline in water

The photo-Fenton process is promising for sincerely treating contaminated water. In this work, carbon-decorated iron oxychloride (C-FeOCl) is synthesized as a photo-Fenton catalyst for removing tetracycline (TC) from water. Three actual states of carbon are identified and their different roles in enhancing photo-Fenton performance are revealed. All carbon on/in FeOCl, including graphite carbon, carbon dots and lattice carbon, enhance visible light adsorption. More importantly, a homogeneous graphite carbon on the outer surface of FeOCl accelerates the transportation-separation of photo-excited electrons along the horizontal direction of FeOCl. Meanwhile, the interlayered carbon dots offer a FeOC bridge in helping the transportation-separation of photo-excited electrons along the vertical direction of FeOCl. In this way, C-FeOCl acquires isotropy in conduction electrons to ensure an efficient Fe(II)/Fe(III) cycle. These interlayered carbon dots extend the layer spacing (d) of FeOCl to about 1.10 nm, exposing the internal iron centers. The lattice carbon significantly increases the amounts of coordinatively unsaturated iron sites (CUISs) in activating hydrogen peroxide (H₂O₂) to hydroxyl radical (OH). Density functional theory (DFT) calculations confirm this activation on inner and external CUISs with a significantly low activation energy of about 0.33 eV.

Template-directed growth of sustainable carboxymethyl cellulose-based aerogels decorated with ZIF-67 for activation peroxymonosulfate degradation of organic dyes

A novel 3D advanced oxidation catalyst ZIF-67@C-CMC/rGO based on carboxymethyl cellulose (CMC) and reduced graphene oxide (rGO) was successfully synthesized by facile in-situ growth of Zeolitic imidazolate framework-67 (ZIF-67). C-CMC/rGO aerogel crosslinked by poly (methyl vinyl ether-alt-maleic acid)/polyethylene glycol system (PMVEMA/PEG) as the host material was prepared through a template-directed growth model and exhibited outstanding mechanical properties. The sustainable composite was successfully used as an efficient catalyst for activating peroxymonosulfate (PMS) to generate SO₄^-· and ·OH, then leads to the removal of organic contaminants. As a result, almost 100 % of 10 ppm MB/RhB solution can be degraded within 5 min due to the combination of catalyst aerogel and PMS. What's more, the aerogel showed a wide pH tolerance range from 4 to 9 and maintained up to 93 % of the contaminant removal rate compared to the initial value after four cycles. The ZIF-67@C-CMC/rGO aerogel with high load rate and excellent catalytic degradation performance not only solved the problem of dispersion and recovery of ZIF-67 particles, but also provided a new idea for the compound wastewater purification in sulfate radical-based advanced oxidation processes (SR-AOPs).

Gravity-driven rattan-based catalytic filter for rapid and highly efficient organic pollutant removal

Metal organic frameworks hold great promise as heterogeneous catalysts in sulfate radical (SO₄^∙-) based advanced oxidation. However, the aggregation of powdered MOF crystals and the complicated recovery procedure largely hinder their large-scale practical applications. It is important to develop eco-friendly and adaptable substrate-immobilized metal organic frameworks. Based on the hierarchical pore structure of the rattan, gravity-driven metal organic frameworks loaded rattan-based catalytic filter was designed to degrade organic pollutants by activating PMS at high liquid fluxes. Inspired by the water transportation of rattan, ZIF-67 was in-situ grown uniformly on the rattan channels inner surface using the continuous flow method. The intrinsically aligned microchannels in the vascular bundles of rattan acted as reaction compartments for the immobilization and stabilization of ZIF-67. Furthermore, the rattan-based catalytic filter exhibited excellent gravity-driven catalytic activity (up to 100 % treatment efficiency for a water flux of 10173.6 L·m^-2·h^-1), recyclability, and stability of organic pollutant degradation. After ten cycles, the TOC removal of ZIF-67@rattan was 69.34 %, maintaining a stable mineralisation capacity for pollutants. The inhibitory effect of the micro-channel promoted the interaction between active groups and contaminants, increasing the degradation efficiency and improving the stability of the composite. The design of a gravity-driven rattan-based catalytic filter for wastewater treatment provides an effective strategy for developing renewable and continuous catalytic systems.

In-situ synthesized ZIF-67 graphene oxide (ZIF-67/GO) nanocomposite for efficient individual and simultaneous detection of heavy metal ions

Heavy metals are ubiquitous in water bodies as a result of anthropogenic activities and over time they accumulate in body thus posing serious health problems. Therefore, it is essential to improve sensing performance, for determination of heavy metal ions (HMIs), of electrochemical sensors. In this work, cobalt-derived MOF (ZIF-67) was in-situ synthesized and incorporated onto the surface of graphene oxide (GO) by simple sonication method. The prepared material (ZIF-67/GO) was characterized by FTIR, XRD, SEM, and Raman spectroscopy. Afterwards, a sensing platform was made by drop-casting synthesized composite onto glassy carbon electrode for individual and simultaneous detection of heavy metal ions pollutants (Hg²⁺, Zn²⁺, Pb²⁺, and Cr³⁺) with estimated detection limits of 2 nM, 1 nM, 5 nM, and 0.6 nM, respectively, when determined simultaneously, that are below the permissible limit by World Health Organization. To the best of our knowledge, this is first report of HMIs detection by ZIF-67 incorporated GO sensor which can successfully determine the Hg⁺², Zn⁺², Pb⁺², and Cr⁺³ ions simultaneously with lower detection limits.

Controllable synthesis of flower-like AuNFs@ZIF-67 core-shell nanocomposites for ultrasensitive SERS detection of histamine in fish

Histamine is a significant biomarker to assess the freshness of fish products. In this study, a novel MOF-based SERS sensor for histamine determination was synthesized by wrapping PVP-capped Au nanoflowers with a ZIF-67 shell (Au NFs@ZIF-67). The highly branched Au NFs core exhibited a strong electromagnetic field enhancement effect and provided an ultra-sensitive SERS fingerprint spectrum, while ZIF-67 shell was the contributor to enrich the target and stabilize the substrate. The morphology of the core-shell structures can be easily controlled by the concentrations of the capping agent PVP and MOF precursor Co ion. Consequently, 4-MBA pre-grafted on the optimized SERS substrate can act as the Raman internal standard (IS) to eliminate signal fluctuations through standardizing all spectra against its peak at 1074 cm^-1. Moreover, as the specific receptor for histamine molecules, 4-MBA helped reach the low detection sensitivity, where the SERS intensity ratio, I₁₁₇₂/I₁₀₇₄ presented a good linear relationship towards the histamine concentrations (10^-3-10^-7 M) with the LOD of 0.87 × 10^-7 M (R² = 0.9930). Furthermore, the application in monitoring fish spoilage process demonstrated the feasibility and reliability of the developed sensor. This work provided a facile strategy to construct MOF-based SERS substrate as a potential platform for the shelf-life prediction of fish products.

Covalent organic frameworks@ZIF-67 derived novel nanocomposite catalyst effectively activated peroxymonosulfate to degrade organic pollutants

Metal organic frameworks-Covalent organic frameworks (MOFs-COFs) nanocomposites could improve the catalytic performance. Herein, a novel nanocomposite catalyst (CC@Co₃O₄) derived from MOFs-COFs (COF@ZIF-67) was prepared on peroxymonosulfate (PMS) activation for bisphenol A (BPA) and rhodamine B (RhB) degradation. Owing to the Co species, oxygen vacancy (O_V), surface hydroxyl (-OH), graphite N and ketone groups (C=O), the CC@Co₃O₄ exhibited higher catalytic degradation performance and total organic carbon (TOC) for BPA (93.8% and 22.3%) and RhB (98.2% and 82.5%) with a small quantity of catalyst (0.10 g/L) and low concentration of PMS (0.20 g/L) even without pH adjustment. Sulfate radicals (•SO₄^-), hydroxyl radicals (•OH), single oxygen (¹O₂), superoxide radicals (•O₂^-) and electron transfer process were all involved in the degradation of BPA and RhB. Among them, the degradation of BPA and RhB mainly depended on •O₂^- and ¹O₂, respectively. Meanwhile, the degradation pathways of BPA and RhB were proposed, and the biotoxicity of the degradation products was evaluated by freshwater chlorella. The results illustrated that the degradation products were environmentally friendly to organisms. In addition, the role of COF in the nanocomposites was also studied. The addition of COF remarkably improved the catalytic performance of CC@Co₃O₄ due to the faster electron transfer, more graphite N and C=O. Overall, this work may open the door to the development of COF-based catalysts in the field of water pollutant remediation.

UV-Assisted Room-Temperature Fabrication of Lignin-Based Nanosilver Complexes for Photothermal-Mediated Sterilization

Green and controllable preparation of silver nanoparticles (AgNPs) remains a great challenge. In this work, ethanol-extracted lignin-based nanosilver composites (AgNPs@EL) were synthesized at room temperature with the assistance of ultraviolet (UV) radiation. The ethanol-extracted lignin (EL) could serve as natural dispersion carriers and reducing agents for AgNPs. The reducing ability of EL could be further improved under UV irradiation, which enables the rapid synthesis of AgNPs at room temperature. More importantly, due to the good photothermal conversion capacity of EL, AgNPs@EL exhibits remarkably enhanced photothermal performance and excellent photothermal antibacterial ability, which could cause 7.2 and 5.3 log₁₀ CFU/mL reduction against Escherichia coli and Staphylococcus aureus, respectively, under near-infrared (NIR) irradiation (808 nm, 1.8 W/cm²) for 5 min. Furthermore, the composite film obtained by impregnating bacterial cellulose onto AgNPs@EL solution also shows significantly improved mechanical properties and photothermal antimicrobial activity. Therefore, this work may provide insights into the design of lignin-based photothermal-mediated antimicrobial materials.

Degradation of phenolic pollutants by persulfate-based advanced oxidation processes: metal and carbon-based catalysis

Wastewater recycling is a solution to address the global water shortage. Phenols are major pollutants in wastewater, and they are toxic even at very low concentrations. Advanced oxidation process (AOP) is an emerging technique for the effective degradation and mineralization of phenols into water. Herein, we aim at giving an insight into the current state of the art in persulfate-based AOP for the oxidation of phenols using metal/metal-oxide and carbon-based materials. Special attention has been paid to the design strategies of high-performance catalysts, and their advantages and drawbacks are discussed. Finally, the key challenges that govern the implementation of persulfate-based AOP catalysts in water purification, in terms of cost and environmental friendliness, are summarized and possible solutions are proposed. This work is expected to help the selection of the optimal strategy for treating phenol emissions in real scenarios.

A highly selective molecularly imprinted electrochemical sensor with anti-interference based on GO/ZIF-67/AgNPs for the detection of p-cresol in a water environment

p-Cresol is a harmful phenolic substance that can cause serious effects on human health even at a low concentration in water. Therefore, the detection of p-cresol in a water environment is particularly important. In this paper, a novel zeolite imidazolate framework-67 (ZIF-67) material with regular morphology was prepared on the surface of graphene oxide doped with silver nanoparticles. The composite was modified on the glassy carbon electrode surface to increase the specific surface area, accelerate the electron transfer rate, enhance the current response and improve the performance of electrochemical sensors. Furthermore, a layer of p-cresol-molecularly imprinted polymer was prepared on the surface of the modified electrode by electropolymerization for the selective, rapid and sensitive detection of p-cresol, which greatly improved the specific recognition of p-cresol. Under optimal conditions, the prepared sensor had a good linear range of 1.0 × 10^-10 M to 1.0 × 10^-5 M with a detection limit as low as 5.4 × 10^-11 M, and it presented excellent reproducibility, stability and selectivity. Moreover, the sensor was successfully applied for the detection of trace p-cresol in a real water environment, providing a reliable assay for sensitive, rapid and selective detection of p-cresol in complex samples.

Self-Assembled Zeolitic Imidazolate Framework/CdS Hollow Microspheres with Efficient Charge Separation for Enhanced Photocatalytic Hydrogen Evolution

Enhanced interfacial charge separation is of great importance to high-efficiency photocatalytic hydrogen production. Herein, we successfully fabricated novel ZIF-67/CdS hollow sphere (HS) and ZIF-8/CdS HS heterostructures through an in situ self-assembly process, in which ZIF-67 and ZIF-8 are closely coated on CdS HSs to form "double-shell"-like structures. This hierarchical heterostructure with porous outer layers on the surface of CdS HSs can expose accessible active sites and possess close contact. Upon visible-light illumination, the optimal proportion of ZIF-67/CdS HS displays a hydrogen generation rate of 1721 μmol g^-1 h^-1, which is 11.9 and 3.1 times higher than that of a pure CdS HS (145 μmol g^-1 h^-1) and ZIF-8/CdS HS (555 μmol g^-1 h^-1), respectively. The proposed photocatalytic mechanism is explored: ZIF-8/CdS HS follows the type-II mechanism, and ZIF-67/CdS HS follows the Z-scheme mechanism. The reason for the higher photocatalytic activity of ZIF-67/CdS HS is that ZIF-67 not merely with a porous structure facilitates the diffusion of H₂ gas, but with a well-matched band structure promotes charge transfer and separation.

Peroxymonosulfate activated by photocatalytic fuel cell with g-C3N4/BiOI/Ti photoanode to enhance rhodamine B degradation and electricity generation

The development of traditional photocatalytic fuel cell (PFC) is severely hindered by poor visible-light response and limited reaction space. In this study, a visible-light responsive PFC with g-C₃N₄/BiOI/Ti photoanode was proposed and applied to activate peroxymonosulfate (PMS) to degrade rhodamine B. The degradation rate, maximum power density and maximum photocurrent density of the PMS/PFC system were respectively 95.39%, 103.87 μW cm^-2 and 0.62 mA cm^-2, which was respectively 1.28, 2.18, and 1.98 times that of PFC. The excellent performance is attributed to the production of more reactive oxygen species and the extension of the reaction space range after the activation of PMS. The activation pathway of PMS and charge transfer pathway of the photoanode were discussed in detail, and it was proposed that PMS was activated by Z-scheme heterojunction g-C₃N₄/BiOI/Ti photoanode.

Synthesis of core-heteroshell structure for ZIF-67/VTM and its efficient activation of peroxymonosulfate in treatment of levofloxacin from an aqueous solution

A core-heteroshell structural magnetic composite of ZIF-67/Vanadium-titanium magnetite (VTM) was successfully synthesized through a feasible solvothermal method and efficiently used in activation of peroxymonosulfate (PMS) for the treatment of levofloxacin (LVF) in an aqueous solution. The catalytic activity of the ZIF-67/VTM composite in LVF degradation was thoroughly evaluated, demonstrating the LVF removal rate could reach up to 93.3% within 60 min at ZIF-67/VTM composite dosage of 100 mg/L, PMS concertation of 75 mg/L, and the natural pH of 6.4. It is quite interesting that the carbon organic skeleton (in the ZIF-67 shell) have accelerated the internal electron transformation rate of the ZIF-67/VTM composite, thus efficiently promoting the O-O band (in PMS) breakage and the redox cycle of cobalt, further favoring the free radicals generation. The quenching experiments and EPR analysis results demonstrated that ·SO₄^- would play a crucial role in the LVF degradation process. Surprisingly, we have found that the introduction of Cl^- (at some certain dosage) would not always decrease the LVF degradation ratio, for a new reactive oxygen species (singlet oxygen) was emerged in this system. What's more, the ZIF-67 (as the wrapping structure) could stabilize the VTM (the inner structure) in changing reaction conditions, prompting a good adaptability at a wider pH range (3-10) for inhibiting the leaching of various metal ions into the aqueous solution. This novel ZIF-67/VTM composite could provide new ideas and routes for the removal of emerging pollutants from an aqueous solution.

Recent progress of silver-containing photocatalysts for water disinfection under visible light irradiation: A review

Photocatalysis has emerged as an environmentally friendly approach for microbial disinfection. The development of visible-light-driven (VLD) photocatalysts for water pollution remediation is imperative, considering that visible light constitutes a substantial fraction of the solar spectrum. The modification of photocatalysts by Ag/AgX (X = Cl, Br, I) deposition can be used to improve photocatalytic efficiencies. This is achieved by preventing photogenerated electron-hole pairs recombination through electron trapping mechanisms. With the introduction of silver NPs, visible light absorption can also be increased through its SPR enhancement. Silver also possesses excellent antimicrobial properties. Consequently, a novel class of Ag/AgX-containing hybrid materials has recently emerged as a promising candidate for water disinfection. This review summarizes the latest advances in the synthesis of Ag/AgX-containing photocatalysts using various synthetic methods. The microbial disinfection efficiencies of the as-prepared materials, the main reactive oxygen species and disinfection mechanisms are also reviewed in detail. Finally, some areas that need to be improved are discussed along with new insights as perspectives for future developments in this field.

Novel functionalization of ZIF-67 for an efficient broad-spectrum photocatalyst: formaldehyde degradation at room temperature

The UV-vis broad-spectrum photocatalytic degradation of HCHO is firstly achieved by functionalized ZIF-67.

Metal–organic-framework-based photocatalysts for microorganism inactivation: a review

A metal–organic framework (MOF) is a porous coordination material composed of multidentate organic ligands and metal ions or metal clusters.

Correlation of Active Sites to Generated Reactive Species and Degradation Routes of Organics in Peroxymonosulfate Activation by Co-Loaded Carbon

Peroxymonosulfate (PMS)-based advanced oxidation processes (PMS-AOPs) as an efficient strategy for organic degradation are highly dependent on catalyst design and structured active sites. However, the identification of the active sites and their relationship with reaction mechanisms for organic degradation are not fully understood for a composite catalyst due to the complex structure. Herein, we developed a family of Co encapsulated in N-doped carbons (Co-PCN) with tailored types and contents of active sites via manipulated pyrolysis for PMS activation and ciprofloxacin (CIP) degradation, focusing on the correlation of active sites to generated reactive species and degradation routes of organics. The structure-function relationships between the different active sites in Co-PCN catalysts and reactive oxygen species (ROS), as well as bond breaking position of CIP, were revealed through regression analysis and density functional theory calculation. Co-N_x, O-C═O, C═O, graphitic N, and defects in Co-PCN stimulate the generation of ¹O₂ for oxidizing the C-C bond in the piperazine ring of CIP into C═O. The substitution of F by OH and hydroxylation of the piperazine ring might be induced by SO₄^•- and ^•OH, whose formation was affected by C-O, Co(0), Co-N_x, graphitic N, and defects. The findings provided new insights into reaction mechanisms in PMS-AOP systems and rational design of catalysts for ROS-oriented degradation of pollutants.

Zeolitic Imidazolate Framework-67-Derived P-Doped Hollow Porous Co3O4 as a Photocatalyst for Hydrogen Production from Water

As a part of photocatalytic water splitting, the design of low-cost, high-activity catalysts plays an essential role in the development of photocatalytic water splitting. Metal oxides have the advantages of a wide range of sources, many varieties, and easy preparation. Doping engineering on their surface can construct new active sites and adjust their catalytic activity. In this work, a new strategy was developed through anion hybridization to regulate electron delocalization. Using one of the cobalt-based zeolitic imidazole skeletons (ZIF-67) as a precursor material, a two-step calcination method was used to prepare a P-doped Co₃O₄ mixed anion composite photocatalyst. The hydrogen production rate of P@Co₃O₄ is 39 times that of ZIF-67 and 6.8 times that of Co₃O₄. Through density functional theory (DFT) calculations, the electron delocalization state of the sample surface is predicted and the reaction energy barrier is reduced to promote the process of the hydrogen evolution reaction (HER). The special O(δ-)-Co(δ+)-P(δ-) surface bonding state promotes the bridging of isolated electronic states and provides active sites for the adsorption and activation of reaction substrates. The improved electron transport pathway and the synergy between the catalytic sites under the high electron transport rate are the main reasons for the enhanced photocatalytic hydrogen evolution activity. This strategy, including changing the surface bond state and optimizing the structure and composition of the catalyst not only provides a new method for preparing other MOF-derived nanomaterials with porous structures but also inspires the reasonable development of other MOF-based advanced photocatalysts.

Photocatalytic activation of peroxymonosulfate (PMS) by novel mesoporous Ag/ZnO@NiFe2O4 nanorods, inducing radical-mediated acetaminophen degradation under UVA irradiation

A new mesoporous Ag/ZnO@NiFe₂O₄ nanorod was prepared by a facile, low-cost, and environmentally friendly strategy from a bimetallic Fe₂Ni-MIL-88 metal organic framework (MOF), as an effective catalyst and peroxymonosulfate (PMS) photo-activator. The structural, morphological, optical, and magnetic properties, as well as the material composition were investigated by XRD, FE-SEM, EDX, HR-TEM, XPS, DRS, PL, EIS, VSM, N₂ adsorption-desorption and ICP-AES analysis. 1.0% w/w loading of Ag nanoparticles on ZnO_0.04@NiFe₂O₄ led to the best catalytic activity for PMS activation under UVA in acetaminophen (ACT) degradation. The maximum degradation efficiency for ACT was 100% within 15 min (at pH = 7.0), with a first-order rate constant of 0.368 min^-1. The calculated quantum yield (1.3 × 10^-3 molecule/photon) of the optimum catalyst was 2.05, and 5.63 times higher than its simple constituents, ZnO_0.04@NiFe₂O₄ and NiFe₂O₄, respectively. Among the various inorganic ions, Cl^- and HCO₃^- showed significant inhibition effect in 1.0%w/w Ag/ZnO_0.04@NiFe₂O₄/PMS/UVA system, due to radical quenching effects. Based on scavenger experiments, HO^• and SO₄^•- were the dominant reactive species in photocatalytic process coupled with PMS. Due to presence of the Fe³⁺/Fe²⁺, and Ni²⁺/Ni³⁺ reaction cycles in the as-made catalyst, the reaction rate of PMS activation was greatly enhanced. Moreover, the formation of a hetero-junction structure with NiFe₂O₄ and ZnO promoted the charge separation of the photo-generated electron/hole pairs. Finally, the major intermediates produced during the reaction were detected by LC-MS analysis, and a plausible mechanism for the photocatalytic degradation of ACT was proposed and discussed in detail.

Water stable graphene oxide metal-organic frameworks composite (ZIF-67@GO) for efficient removal of malachite green from water

Malachite green (MG) is extensively applied in aquaculture worldwide as a therapeutic agent. MG and its primary metabolite leucomalachite green (LMG) are commonly detected in aquaculture products. MG can cause serious health concerns (in vivo carcinogenic/genotoxic). The extensive water solubility of MG leads to water pollution and hence it is mandatory to remove MG from water. The current study explores adsorptive removal of MG from water using highly water stable Zeolitic Imidazolate framework/graphene oxide composites (ZIF-67@GO). Adsorption performance of newly synthesized composites is justified for MG removal with excellent results of pseudo second order (R² = 0.99955) which is well-fitted in this case. ZIF-67@GO data of adsorption isotherm for MG is observed using Freundlich Model (R² = 0.99999) and with adsorption capacity value observed (134.79 mg/g) with removal efficiency of 99.18%, indicates π-staking and electrostatic association between ZIF-67@GO and MG molecules. Synthesized material has retained reusability while removal efficiency reduced only by 6% after many cycles. Furthermore, factors effecting absorption like contact time, pH, adsorbent dose and quantity and temperature are also determined.

Tetracycline hydrochloride degradation over manganese cobaltate (MnCo2O4) modified ultrathin graphitic carbon nitride (g-C3N4) nanosheet through the highly efficient activation of peroxymonosulfate under visible light irradiation

Peroxymonosulfate (PMS) activation by heterogeneous transition metal oxides is an effective approach for treating emerging pollutants in water. However, the low PMS activation efficiency associated with the valency conversion rate of transition metals has been a major challenge to sulfate radical-based oxidation. In this work, manganese cobaltate (MnCo₂O₄) nanoparticles anchored on graphitic carbon nitride (g-C₃N₄) flakes (MnCo₂O₄/g-C₃N₄) were successfully prepared and showed high PMS activation efficiency under visible (Vis) light. The obtained catalysts degraded 96.1% of the tetracycline hydrochloride (TCH) through the synergistic effect of PMS and photocatalysis. The reaction rate constant (0.2505 min^-1) was 5.3 and 1.8 times higher in the MnCo₂O₄/g-C₃N₄/PMS/Vis system than in the pristine g-C₃N₄ (0.0471 min^-1) and MnCo₂O₄ (0.1435 min^-1) systems, respectively. The characterization results verified that g-C₃N₄, which functions as the electron donor in the photocatalytic heterojunction system, could transmit numerous photogenerated electrons to MnCo₂O₄, thereby increasing the cyclability of divalent-trivalent metal ions. The composites also showed good stability, cycling capability, and cation/anion tolerance. Tentative degradation mechanism and reaction pathways were proposed based on the reactive species and degradation products.