Effect of Cr doping in promoting the catalytic oxidation of dichloromethane (CH2Cl2) over Cr-Co@Z catalysts

Effect of inserting Cr in promoting the deep oxidation of dichloromethane over Co/WNb catalysts at low temperatures

Enhancing catalytic activity while inhibiting the generation of chlorine byproducts is essential in the catalytic oxidation process of chlorinated volatile organic compounds (CVOCs). In this study, Cr-modified Co/WNb catalysts were synthesized and utilized for the degradation of dichloromethane (DCM). It was found that the moderate introduction of Cr exposed more Cr6+ on the catalyst surface due to the interaction between cobalt and chromium oxides, which promoted the generation of more chemisorbed oxygen on the surface, thus improving the redox properties and enhancing the activity of the catalysts. Additionally, the introduction of Cr increased the B acid sites of the catalysts, promoting the breaking of C-Cl bonds and the removal of dissociated Cl- Meanwhile, the improved redox properties also allowed further oxidation of the dissociated activated intermediate products and inhibited the generation of chlorine byproducts. The catalyst activity was optimal when the Cr to Co molar ratio was 4, which the T90 of DCM was 256 °C and the monochloromethane selectivity was only 1.7 %. Moreover, Co4Cr/WNb showed excellent chlorine and water resistance, making it an ideal candidate for CVOC degradation.

Synergistic catalytic removal of NOx and chlorinated organics through the cooperation of different active sites

The synergistic removal of NOx and chlorinated volatile organic compounds (CVOCs) has become the hot topic in the field of environmental catalysis. However, due to the trade-off effects between catalytic reduction of NOx and catalytic oxidation of CVOCs, it is indispensable to achieve well-matched redox property and acidity. Herein, synergistic catalytic removal of NOx and chlorobenzene (CB, as the model of CVOCs) has been originally demonstrated over a Co-doped SmMn2O5 mullite catalyst. Two kinds of Mn-Mn sites existed in Mn-O-Mn-Mn and Co-O-Mn-Mn sites were constructed, which owned gradient redox ability. It has been demonstrated that the cooperation of different active sites can achieve the balanced redox and acidic property of the SmMn2O5 catalyst. It is interesting that the d band center of Mn-Mn sites in two different sites was decreased by the introduction of Co, which inhibited the nitrate species deposition and significantly improved the N2 selectivity. The Co-O-Mn-Mn sites were beneficial to the oxidation of CB and it cooperates with Mn-O-Mn-Mn to promote the synergistic catalytic performance. This work paves the way for synergistic removal of NOx and CVOCs over cooperative active sites in catalysts.

Promoted wet peroxide oxidation of chlorinated volatile organic compounds catalyzed by FeOCl supported on macro-microporous biomass-derived activated carbon

Chlorinated volatile organic compounds (CVOCs) are a recalcitrant class of air pollutants, and the strongly oxidizing reactive oxygen species (ROS) generated in advanced oxidation processes (AOPs) are promising to degrade them. In this study, a FeOCl-loaded biomass-derived activated carbon (BAC) has been used as an adsorbent for accumulating CVOCs and catalyst for activating H₂O₂ to construct a wet scrubber for the removal of airborne CVOCs. In addition to well-developed micropores, the BAC has macropores mimicking those of biostructures, which allows CVOCs to diffuse easily to its adsorption sites and catalytic sites. Probe experiments have revealed HO^• to be the dominant ROS in the FeOCl/BAC + H₂O₂ system. The wet scrubber performs well at pH 3 and H₂O₂ concentrations as low as a few mM. It is capable of removing over 90% of dichloroethane, trichloroethylene, dichloromethane and chlorobenzene from air. By applying pulsed dosing or continuous dosing to replenish H₂O₂ to maintain its appropriate concentration, the system achieves good long-term efficiency. A dichloroethane degradation pathway is proposed based on the analysis of intermediates. This work may provide inspiration for the design of catalyst exploiting the inherent structure of biomass for catalytic wet oxidation of CVOCs or other contaminants.

Catalytic ozonation of dichloromethane at low temperature and even room temperature on Mn-loaded catalysts

Five Mn-loaded catalysts were synthesized on γ-Al2O3, TiO2, ZrO2, nano γ-Al2O3 and nanoZrO2 supports. The catalytic ozonation of DCM (dichloromethane) was evaluated under industrial conditions (i.e., temperature, O3 input, H2O and SO2 content). According to results, >90% DCM conversion without O3 residue was achieved for all samples at 120 °C and an O3/DCM ratio of 6. At 20-120 °C, the highest Mn3+ content, abundant surface oxygen species and more weak acid sites led to the best performance of Mn/nanoAl2O3 (M/A-II). At 20 °C and 120 °C, 80% and 95% DCM can be degraded respectively on M/A-II at 20 °C with matched surface oxygen species and acidity. An O3/DCM ratio of 6 was optimal for performance and economy. For the effects of complex exhaust, both H2O and SO2 deactivated M/A-II. The H2O-induced deactivation was recoverable and also removed surface-deposited chlorine-containing species, enhancing the HCl selectivity. Finally, the Cl equilibrium of the reaction was comprehensively analyzed.

The lanthanide doping effect on toluene catalytic oxidation over Pt/CeO2 catalyst

The present work was undertaken to know the lanthanide doping effect on the physicochemical properties of Pt/CeO₂ catalysts and their catalytic activity for toluene oxidation. A series of lanthanide ions (La, Pr, Nd, Sm and Gd) were incorporated into ceria lattice by hydrothermal method, and the Pt nanoparticles with equal quality were successfully loaded on various ceria-based supports. Their catalytic performance toward toluene oxidation shows a remarkable lanthanide-doping effect, and the activity is much dependent on the ion radius and valence state of dopants. Owing to smaller ion radius and low valence state, the dopant of Gd would form more Gd-Ce complex and less GdO₈-type complex, generating more oxygen vacancies and then promoting oxygen replenishment. Furthermore, the high concentration of oxygen vacancy would drive electrons to transfer from support to metal, and thus electron-rich and under-coordinated Pt particles that are favorable for toluene adsorption and dissociation are obtained. Attributing to above positive factors, the doping of Gd would effectively enhance the catalytic oxidation of toluene over Pt/CeO₂ catalyst. In addition, the Pt/CeGdO₂ sample exhibits an excellent reaction stability and resistance of concentration impact.

Catalytic activity and stability of a Cr modified Co–Fe LDO catalyst in the simultaneous catalytic reduction of NOx and oxidation of o-DCB

In this paper, a Co–Fe LDO catalyst was prepared by combining K2Cr2O7 and Cr(NO3)3 to modify the LDH precursor.