Tannin foam immobilized with ferric ions for efficient removal of ciprofloxacin at low concentrations

Efficient adsorption of chloroquine phosphate by a novel sodium alginate/tannic acid double-network hydrogel in a wide pH range

In this work, a novel double-network composite hydrogel (SA/TA), composed of sodium alginate (SA) and tannic acid (TA), was designed and fabricated by a successive cross-linking method using Ti(IV) and Ca(II) as crosslinkers. SA/TA exhibited reinforced mechanical strength and anti-swelling properties because of the double-network structure. SA/TA was used as an adsorbent for removal of a popular antiviral drug, chloroquine phosphate (CQ), in water. The adsorption performance of SA/TA was systematically investigated, to study various effects including those of TA mass content, solution pH, adsorption time, and initial CQ concentration. Adsorption was also examined in presence of inorganic and organic coexisting substances commonly found in wastewater, and under different actual water samples. Batch experimental results indicated that SA/TA could maintain higher and more stable CQ uptakes within a wide solution pH range from 3.0 to 10.0, compared to its precursor, SA hydrogel, owing to the addition of TA-Ti(IV) coordination network. The maximum experimental CQ uptake exhibited by the 1:1 (by wt) SA/TA (SA/TA2) was as high as 0.699 mmol/g at the initial pH of 9.0. A high concentration of coexisting NaCl evidently reduced the CQ uptakes of SA/TA2 due to the electrostatic shielding effect, moreover, divalent cations including Ca(II) and Mg(II) also inhibited the adsorption of CQ due to competitive adsorption. However, humic acid had little effect on this adsorption. Considering the apparent adsorption performance, the aforementioned effects of various factors and the spectroscopic characterizations, multi-interactions are suggested for adsorption including chelation, electrostatic interactions, π-π electron donor-acceptor interaction and hydrogen bonding. SA/TA showed a slight loss in adsorption capacity toward CQ and sustained physicochemical structural stability, even after six adsorption-desorption cycles. In addition to CQ, SA/TA could be efficiently used for adsorption of two other antivirus drugs, namely, hydroxychloroquine sulfate and oseltamivir phosphate. This work provides an effective strategy for the design and fabrication of novel adsorbents that can effectively adsorb antiviral drugs over a wide pH range.

Efficient Removal of Tetracyclines and Quinolones Enabled by Polyphenol-Mediated Supramolecular Coagulation

Ubiquitous antibiotics threaten human health and ecosystem sustainability, and existing removal strategies, especially conventional multistep water treatments, are primarily limited by the antibiotic-specific removal capability. Here, we explore the natural biomass, plant polyphenols, in the capture of various antibiotics with a facile treatment─polyphenol-mediated antibiotic-independent supramolecular coagulation (PMAC). The PMAC shows a superior performance in removing five tetracyclines and quinolones (up to 98.54%), even under complex environmental parameters, including different pH, the presence of inorganic particles and ionic strength, and the presence of conventional colloid-associated contaminants. Our mechanistic studies suggested that PMAC is capable of exerting multiple molecular interactions with various antibiotics, and the coordination-driven self-assembly further destabilizes the phenolic-antibiotic nanocomplexes, enabling an antibiotic-independent coagulation. Collectively, the combination of efficient remediation with inexpensive biomass suggests a simple and scalable method for the sustainable removal of antibiotics. Our strategy shows great promise as a cost-effective, facile approach to eliminate antibiotics capable of being integrated into the currently existing water treatment systems.

Tannic acid-accelerated fenton chemical reaction amplification for fluorescent biosensing: The proof-of-concept towards ultrasensitive detection of DNA methylation

As a promising biomarker, the level of methylated DNA usually changes in the early stage of the cancer. Ultrasensitive detection of the changes of methylated DNA offers possibility for early diagnosis of cancer. In this work, a tannic acid-accelerated Fenton chemical reaction amplification was firstly proposed for the construction of ultrasensitive fluorescent assay. Tannic acid was used as reductant to accelerate Fenton reaction procedure through the conversion of Fe3+/Fe2+, generating hydroxyl radicals (·OH) continuously. The produced ·OH oxidized massive non-fluorescent terephthalic acid (TA) to fluorescent-emitting hydroxy terephthalic acid (TAOH). In this way, the fluorescent signal could be greatly enhanced and the sensitivity was improved almost 116 times. The proposed signal amplification strategy was further applied to detect of DNA methylation with the assistance of liposome encapsulated with tannic-Fe3+ complexes. The methylated DNA was firstly captured through the hybridization with its complementary DNA that were pre-modified in the 96-well plate via the combination between streptavidin (SA) and biotin. Then, 5 mC antibody on the surface of liposomes specially recognized and combined with methylation sites, which brought large amount of tannic-Fe3+ complexes to participate Fenton reaction. The fluorescence of generated TAOH was depended on the concentration of methylated DNA. The assay showed good analytical performance for methylated DNA with a limit of detection (LOD) of 1.4 fM. It's believed that tannic acid-accelerated Fenton chemical reaction amplification strategy provides a promising platform for ultrasensitive fluorescent detection of low abundant biomarkers.

Natural phenol-inspired porous polymers for efficient removal of tetracycline: Experimental and engineering analysis

Efficient and feasible removal of trace antibiotics from wastewater is extremely important due to its environmental persistence, bioaccumulation, and toxicity, but still remains a huge challenge. Herein, three natural phenol-inspired porous organic polymers were fabricated from natural phenolic-derived monomers (p-hydroxy benzaldehyde, 2,4-dihydroxy benzaldehyde and 2,4,6-trihydroxy benzaldehyde) and melamine via polycondensation reaction. Characterization highlighted that the increasing contents of hydroxyl groups in monomers induced an increase of the polymer total porosity and promoted the formation of a highly microporous structure. With mesopore-dominated pore (average pore diameter 9.6 nm) and large pore volume (1.78 cm³/g), p-hydroxy benzaldehyde-based porous polymer (1-HBPP) exhibited ultra-high maximum adsorption capacity (q_max) of 697.6 mg/g for tetracycline (TC) antibiotic. Meanwhile, the porous networks and plentiful active sites of 1-HBPP enabled fast adsorption kinetics (within 10 min) for TC removal, which could be well described by the pseudo-second-order model. Dynamic adsorption studies showed that 1-HBPP could be used in fixed-bed adsorption column (FBAC) with high removal efficiency (breakthrough volume per unit mass, 13.2 L/g) and dynamic adsorption capacity (201.6 mg/g), which were much higher than other reported adsorbents. The breakthrough curves both well matched with Thomas and Yoon-Nelson models in FBAC treatment. Moreover, removal mechanism analysis affirmed that pore-filling, hydrogen bonding, electrostatic interactions and π-π stacking interactions were main driving forces for TC adsorption. The prepared natural phenol-inspired porous adsorbents show great potential in antibiotics removal from wastewater, and this strategy would promote the sustainable and high-value utilization of natural phenolic compounds.

A Review of Rigid Polymeric Cellular Foams and Their Greener Tannin-Based Alternatives

This review focuses on the description of the main processes and materials used for the formulation of rigid polymer foams. Polyurethanes and their derivatives, as well as phenolic systems, are described, and their main components, foaming routes, end of life, and recycling are considered. Due to environmental concerns and the need to find bio-based alternatives for these products, special attention is given to a recent class of polymeric foams: tannin-based foams. In addition to their formulation and foaming procedures, their main structural, thermal, mechanical, and fire resistance properties are described in detail, with emphasis on their advanced applications and recycling routes. These systems have been shown to possess very interesting properties that allow them to be considered as potential substitutes for non-renewable rigid polymeric cellular foams.

Nanocellulose Removes the Need for Chemical Crosslinking in Tannin-Based Rigid Foams and Enhances Their Strength and Fire Retardancy

Thermal insulation and fire protection are two of the most critical features affecting energy efficiency and safety in built environments. Together with the associated environmental footprint, there is a strong need to consider new insulation materials. Tannin rigid foams have been proposed as viable and sustainable alternatives to expanded polyurethanes, traditionally used in building enveloping. Tannin foams structure result from polymerization with furfuryl alcohol via self-expanding. We further introduce cellulose nanofibrils (CNFs) as a reinforcing agent that eliminates the need for chemical crosslinking during foam formation. CNF forms highly entangled and interconnected nanonetworks, at solid fractions as low as 0.1 wt %, enabling the formation of foams that are ca. 30% stronger and ca. 25% lighter compared to those produced with formaldehyde, currently known as one of the best performers in chemically coupling tannin and furfuryl alcohol. Compared to the those chemically crosslinked, our CNF-reinforced tannin foams display higher thermal degradation temperature (peak shifted upward, by 30-50 °C) and fire resistance (40% decrease in mass loss). Furthermore, we demonstrate partially hydrophobized CNF to tailor the foam microstructure and derived physical-mechanical properties. In sum, green and sustainable foams, stronger, lighter, and more resistant to fire are demonstrated compared to those produced by formaldehyde crosslinking.

Enhanced Ciprofloxacin Removal from Aqueous Solution Using a Chemically Modified Biochar Derived from Bamboo Sawdust: Adsorption Process Optimization with Response Surface Methodology

Contamination of water by ciprofloxacin has become a significant concern due to its adverse health effects and growing evidence of antimicrobial-resistant gene evolution. To this end, a chemically modified bamboo biochar was prepared from bamboo sawdust to effectively remove ciprofloxacin (CIP) from an aqueous solution. Under similar adsorption conditions, the modified bamboo biochar (MBC) has an excellent CIP removal efficiency (96%) compared to unmodified bamboo biochar (UBC) efficiency (45%). Thus, MBC was used in batch adsorption experiments, and the process was optimized with the central composite design (CCD) framework of response surface methodology (RSM). Sorption process parameters such as initial CIP concentration, pH, adsorbent dose, and contact time were studied and found to have a significant effect on CIP removal. The optimal CIP removal (96%) was obtained at MBC dose (0.5 g L-1), CIP initial concentration (20 mg L-1), pH (7.5), and contact time (46 min). The adsorption kinetic data were well described by the pseudo-second-order model ( $R^2=0.999$ ), and both Langmuir ( $R^2=0.994$ ) and Freundlich ( $R^2=0.972$ ) models gave the best fit in CIP adsorption isotherm analysis. The maximum monolayer adsorption capacity of the MBC was 78.43 mg g-1 based on the Langmuir isotherm model. These results suggest that CIP adsorption was mainly controlled by chemisorption. Moreover, the CIP adsorption process was endothermic and spontaneous. Overall, MBC is a low-cost, efficient, and recyclable adsorbent for eliminating emerging contaminants such as ciprofloxacin from an aqueous solution.

Antimony removal from water by pine bark tannin resin: Batch and fixed-bed adsorption

Antimony is present in water by natural causes but is also mobilized in the environment by anthropogenic activities, particularly mining. Considering its toxicological behavior, antimony removal from contaminated groundwater and mine effluents is necessary. In this work, Sb(III) and Sb(V) removal from aqueous solution was studied using a resin prepared from pine bark tannins. Subsequent iron loading of the tannin resin was tested, but this chemical modification was shown not to improve adsorptive properties. Tannin resin (unmodified form) presented a good ability to uptake antimony, with maximum adsorption capacities, evaluated in batch mode, of 30-33 mg g^-1 (Sb(III), pH 6) and 16-47 mg g^-1 (Sb(V), pH 2), depending on the particle size. The performance of the adsorbent was not affected by high levels of sulfate, which characterize most mining-impacted waters, but depending on Sb-load of the water it could be moderately affected by metal cations coexisting in solution. The applicability of the tannin resin on Sb(III) uptake was confirmed in continuous fixed-bed experiments. Breakthrough curves were obtained for different inlet adsorbate concentrations, bed heights, flow rates and aqueous media (distilled water and a simulated mine effluent). The adsorptive capacity of the tannin resin was practically maintained and adsorbent usage rates as low as 0.11 kg m^-3 were determined to treat efficiently (90% removal) 1 mg-Sb(III) L^-1 contaminated water. Overall, tannin resin is a bio-derived sorbent that shows affinity for antimony in both redox states, being stable in pH conditions commonly found in Sb-contaminated waters.

Antioxidant and Antibacterial Activities of Dodecyl Tannin Derivative Linked with 1,2,3-Triazole

Dodecyl tannin derivative linked with 1,2,3-triazole was prepared by the click reaction of dodecyl azide and alkynylated tannin. The structure of tannin derivative was identified by FT-IR spectrometer and elemental analyzer, and the surface activity, antioxidant activity and antimicrobial activity of tannin derivative were studied. The surface tension of tannin derivative was significantly reduced because of the introduction of long chain alkyl groups, and the lowest surface tension was 38.87 mN/m at 1.0 mg/mL. The tannin derivative had strong ability to scavenge 1,1-diphenyl-2-picrylhydrazyl radical, the scavenging rate could reach 89.08 % at 0.25 mg/mL. The tannin derivative exhibited strong antibacterial activity against E. coli and S. aureus due to the increased fat-solubility of tannin derivative and the introduction of antibacterial triazole groups in molecular structure of tannin derivative, and the bacteriostatic ratios of tannin derivative against E. coli and S. aureus were 92.16 % and 89.21 % at 2.0 mg/mL, respectively. The tannin derivative can be used as good candidates for antibacterial packaging or antioxidant supplements.