Degradation of diclofenac in water under LED irradiation using combined g-C3N4/NH2-MIL-125 photocatalysts

Photo-induced degradation of toxic recalcitrant compounds from surface water: Insights into advanced nanomaterials, hybrid photocatalytic systems, and real applications

The rapid increase in toxic recalcitrant organic compounds (ROCs) from various industrial, residential, and agricultural sources poses a significant public health concern and threatens environmental preservation. The presence of these toxic ROCs weakens the effectiveness of conventional water and wastewater treatment systems. As a result, numerous physicochemical and biological treatment processes have been explored, each demonstrating varying removal efficiencies depending on experimental conditions. Given the limitations of existing treatment methods, research has increasingly focused on advanced oxidation processes, particularly photocatalysis. Photocatalysis is a prominent treatment technique due to its low sludge production, non-toxic nature, reusable characteristics, and ability to harness visible light. This review comprehensively examines the ecotoxicological effects of ROCs, existing biological and physicochemical treatment methods, advancements in photocatalyst synthesis, the transition from conventional to advanced photocatalysts, and hybrid treatment systems. In the context of photocatalytic removal of ROCs, the review also addresses several influencing parameters, including initial pollutant concentration, solution pH, light intensity, catalyst dose, and catalyst type. Global case studies focusing on the mechanisms of photocatalytic degradation of ROCs are highlighted. The documented photocatalysts for removing ROCs from water and wastewater have shown promising results. Moreover, integrating photocatalysis with advanced physicochemical and biological processes has effectively removed various dissolved (e.g., ROCs) and suspended impurities, showcasing its practical applications. Thus, this study could serve as a valuable resource for researchers and engineers working on the treatment of various micropollutants, such as ROCs, in real wastewater.

NH2-MIL-125(Ti) and its functional nanomaterials - a versatile platform in the photocatalytic arena

Titanium (Ti)-based MOFs are promising materials known for their porosity, stability, diverse valence states, and a lower conduction band (CB) than Zr-MOFs. These features support stable ligand-to-metal charge transfer (LMCT) transitions under photoirradiation, enhancing photocatalytic performance. However, Ti-MOF structures remain a challenge owing to the highly volatile and hydrophilic nature of ionic Ti precursors. The discovery of MIL-125 marked a breakthrough in Ti-cluster coordination chemistry. Combining it with NH2 chromophores to form NH2-MIL-125 enhanced its structural design and extended its activity into the visible light region. This review delves into the high-performance photocatalytic properties of NH2-MIL-125, focusing on its applications in H2O2 and H2 production, CO2 and N2 reduction, drug and dye degradation, photocatalytic sensors, and organic transformation reactions. The discussion considers the influence of the Ti precursor, coordination environment, synthesis process, and charge transfer mechanisms. Numerous strategic methods have been discussed to improve the performance of NH2-MIL-125 by incorporating linker modification, metal node modification, encapsulation of active species, and post-modification for enhancing light absorption ability, promoting charge separation, and improving photocatalytic efficiency. Moreover, future perspectives include methods to investigate how the efficiency of NH2-MIL-125-based materials can be planned in promoting research by highlighting their versatility and potential impacts in the area of photocatalysis.

Ligand modulated charge transfers in Z-scheme configured Ni-MOF/g-C3N4 nanocomposites for photocatalytic remediation of dye-polluted water

The development of photocatalysts must be meticulous, especially when they are designed to degrade hazardous dyes that cause mutagenesis and carcinogenesis. In this meticulous approach, Ni-based metal-organic frameworks with different ligands, including terephthalic acid (NTP), 2-aminoterephthalic acid (NATP), and their composite with g-C3N4 (NTP/GCN, and NATP/GCN) have been synthesized using hydrothermal method. Structural analysis by XRD and ATR-IR revealed synergistic properties due to robust chemical interactions between the NATP-MOFs and GCN systems. A flower-like morphology was observed for both NTP and NATP, while their composites showed mixed-particulate structures mimicking the morphology of GCN. Optical analyses indicated visible-light driven properties with modulated recombination resistance in the system. Among the synthesized bare and composite systems, NATP/GCN exhibited the highest photocatalytic degradation efficiency for the cationic rhodamine B dye (~ 93% in 120 min), while it was relatively less efficient for the anionic Congo red dye, (~ 64% in 120 min). The insights gained from the fundamental characterizations including Mott-Schottky, scavenger, and electrochemical impedance analysis revealed that the amino-groups in NATP/GCN composite offered the band edge potentials suitable for the effective generation of energetic radical species with the improved carrier delocalization, recombination resistance, and charge transfer properties in the composite system through Z-scheme formation. Parametric investigations by varying the concentration of catalyst, dye, and pH along with recycle studies, demonstrated the excellent stability of the developed composites for sustainable photocatalytic applications.

Recent advances in manipulating strategies of NH2-functionalized metallic organic frameworks-based heterojunction photocatalysts for the sustainable mitigation of various pollutants

NH2-functionalized metal-organic frameworks (NH2-functionalized MOFs) can abate organic pollutants, predominantly favored by their chemical, mechanical, and thermal stabilities. The present review stated the chemistry of identifying NH2-functionalization and its role in enhancing the properties of bare MOFs. The integration of the amine group bestows several advantages: 1.) enabling band structure modification, 2.) establishing strong metal-NH2 bonds, 3.) preserving MOF structures from reactive oxygen species, and 4.) shielding MOF structures against pH alterations. Consequently, the NH2-functionalized MOFs are promising materials for the photodegradation of organic contaminants. The following section illustrates the two approaches (pre-synthetic and post-synthetic) for NH2-functionalized MOFs. Nevertheless, specific intrinsic limitations, entailing a high recombination rate of charge carriers and inadequate optical adsorption, restrain the applicability of NH2-functionalized MOFs. Accordingly, the succeeding segment presents strategies to elevate the photocatalytic activities of NH2-functionalized MOFs via heterojunction fabrication. The importance of the NH2-functionalized MOFs-based heterojunction has been evaluated in terms of the effect on the enhancement of charge separation, optical adsorption, and redox ability of charge carriers. Subsequently, the potential application for organic pollutant degradation via NH2-functionalized MOFs-based heterojunctions has been scrutinized, wherein the organic pollutants. Eventually, the review concluded with challenges and potential opportunities in engaging and burgeoning domains of the NH2-functionalized MOFs-based heterojunctions.

Boosted visible-light-induced photo-Fenton degradation of organic pollutants over a novel direct Z-scheme NH2-MIL-125(Ti)@FeOCl heterojunction catalyst

Improving the charge separation, charge transfer, and effective utilization is crucial in a photocatalysis system. Herein, we prepared a novel direct Z-scheme NH2-MIL-125(Ti)@FeOCl (Ti-MOF@FeOCl) composite photocatalyst through a simple method. The prepared composite catalyst was utilized in the photo-Fenton degradation of Rhodamine B (RhB) and ciprofloxacin (CIP). The Ti-MOF@FeOCl (10FeTi-MOF) catalyst exhibited the highest catalytic performance and degraded 99.1 and 66% of RhB and CIP, respectively. However, the pure NH2-MIL-125(Ti) (Ti-MOF) and FeOCl catalysts achieved only 50 and 92% of RhB and 50 and 37% of CIP, respectively. The higher catalytic activities of the Ti-MOF@FeOCl composite catalyst could be due to the electronic structure improvements, photoinduced charge separations, and charge transfer abilities in the catalyst system. The composite catalysts have also enhanced adsorption and visible light-responsive properties, allowing for efficient degradation. Furthermore, the electron paramagnetic resonance (EPR) signals, the reactive species trapping experiments, and Mott-Schottky (M - S) measurements revealed that the photogenerated superoxide radical (•O2-), hydroxyl radical (•OH), and holes (h+) played a vital role in the degradation process. The results also demonstrated that the Ti-MOF@FeOCl heterojunction composite catalysts could be a promising photo-Fenton catalyst system for the environmental remediation. Environmental implications The discharging of toxic contaminants such as organic dyes, antibiotics, and other emerging pollutants to the environment deteriorates the ecosystem. Specifically, the residues of organic pollutants recognized as a threat to ecosystem and a cause for carcinogenic effects. Among them, ciprofloxacin is one of antibiotics which has biological resistance, and metabolize partially in the human or animal bodies. It is also difficult to degrade ciprofloxacin completely with traditional treatment methods. Similarly, organic dyes are also toxic and a cause for carcinogenic effects. Therefore, effective degradation of organic pollutants such as RhB and ciprofloxacin with appropriate method is crucial.

NiFe-PANI composites synthesized by electrodeposition for enhanced photocatalytic degradation of diclofenac sodium from wastewater

A simple inexpensive approach was used to synthesize NiFe-PANI nanocomposites and used for photodegradation of diclofenac sodium (DCF) in water sources. Morphological, optical, structural, and catalytic properties of the nanocomposites were investigated using X-ray diffraction (XRD) to confirm the cubic structure of NiFe nanoparticles and Fourier-transform infrared spectroscopy (FTIR) that revealed the presence of NiFe and PANI, scanning electron microscopy (SEM) showed the uniform distribution of NiFe nanoparticles onto the surface of PANI, Energy-Dispersive X-ray spectroscopy (EDX) was utilized to validate the composition of the obtained Permalloy NiFe-PANI nanocomposites, optical properties confirmed the decrease of Eg band gap from 2.62 to 2.51 eV by the addition of NiFe. The NiFe-PANI composite showed superior photocatalytic efficiency in degrading DCF, achieving 82.53% degradation in 15 min and 97.89% in 60 min. This was significantly higher than the PANI alone, which achieved 62.72 and 93.48% degradation in the same time intervals respectively. The results indicated that the photocatalytic efficiency remained consistent, with no observable decrease, even after five cycles of recycling. The NiFe-PANI catalyst served as an efficient and cost-effective photocatalyst for DCF degradation, and the study holds promise for the photocatalytic removal of other organic pollutants from water and wastewater.

β-Cyclodextrin-Stabilized CuO/MXene Nanocomposite as an Electrode Material for High-Performance Supercapacitors

Supercapacitors are the best energy storage systems due to their high power density, quick charge/discharge rate, and long-term reliability. In this study, β-cyclodextrin-stabilized CuO nanoparticles (CuO@βCD NPs) were synthesized through a simple reduction method and anchored on the surface of MXene nanosheets in three different proportions (1:1, 4:1, and 1:4) to obtain CuO@βCD/MXene nanocomposites through the wet-impregnation method. The formation of CuO@βCD NPs and their physicochemical characteristics were verified by XRD, XPS, FE-SEM, and HR-TEM analysis. The actual focus is on the evaluation of the electrochemical performances of CuO@βCD, MXene, and CuO@βCD/MXene nanocomposites for supercapacitor applications. The cyclic voltammetry and galvanostatic charge-discharge analysis revealed the pseudocapacitance and an improved specific capacitance of 1693.43 F g-1 at 0.90 A g-1 for the CuO@βCD/MXene (1:1) nanocomposite. The electrochemical impedance analysis displays superior electrical conductivity with a low charge transfer resistance value on incorporating CuO@βCD between the MXene layers. Furthermore, the CuO@βCD/MXene (1:1) nanocomposite exhibited improved long-term cycling stability by retaining 86% of its initial specific capacitance even after the 10,000th cycle at the current density of 4.54 A g-1. Based on the electrochemical performance, the CuO@βCD/MXene (1:1) nanocomposite proves its suitability as an electrode material for supercapacitor application with long-term cycling stability and rate capability.

Preparation of ZIF-67/C3N4 composite material and adsorption of tetracycline hydrochloride

In recent years, wastewater treatment to remove tetracycline hydrochloride (TCH) has received much attention in water treatment problems. ZIF-67/C3N4 composite adsorbent, a nanosheet structured material stacked with MOFs, was prepared by in situ growth method, which has high adsorption activity for tetracycline hydrochloride in wastewater. Comparing the effect of monomeric and composite adsorbents, Z6C2 had the best adsorption effect (206 mg·g-1), which was 77.6% higher than that of ZIF-67 (116 mg·g-1) and 10.8 times higher than that of C3N4 (19 mg·g-1). The structure of ZIF-67 stacked on C3N4 nanosheets has an excellent specific surface area and number of active sites, as well as π-π interactions, electrostatic interactions, and hydrogen bonding interactions between the adsorbent and TCH, which combine to enhance the adsorption performance. The adsorption process is accompanied by a combination of chemisorption, mass transport, and internal diffusion rate-limiting. It was shown that the adsorption process is favorable for monolayer adsorption as well as a heat absorption reaction that proceeds spontaneously. The adsorbent exhibits good stability and adsorption capacity, which may be suitable for efficient and low-cost water purification.

Rapid synthesis of cerium-UiO-66 MOF nanoparticles for photocatalytic dye degradation

An unprecedented synthesis method is used to form a series of Ce-UiO-66-X (X = NH2, OH, H, NO2, COOH) metal-organic frameworks by precipitation from mixed solvents, with instantaneous crystallisation on combining separate solutions of ligands and metal precursors. This allows the first direct synthesis of Ce-UiO-66-OH. Powder X-ray diffraction (PXRD) shows that all materials are pure phase with a broadened profile that indicates nano-scale crystallite domain size. The effect of different functional groups on the benzene-1,4-dicarboxylate linker within the UiO-66 structure has been investigated on degradation of two cationic (methylene blue and rhodamine B) and two anionic (Congo red, and Alizarin red S) dyes under UV and visible light irradiation at room temperature. Analysis of the dye adsorption in the absence of light is accounted for using pseudo-first order kinetics, and the Ce-UiO-66-NH2, Ce-UiO-66-OH, and Ce-UiO-66-H materials display a considerable photocatalytic activity to degrade Alizarin red S and Congo red rapidly between 1 and 3 minutes. The materials show excellent photostability and recyclability under UV and visible light, with no loss of crystallinity seen by PXRD and activity maintained over 5 cycles, with 16 hours photostability for Ce-UiO-66-NH2.

Photocatalytic Self-Fenton System of g-C3N4-Based for Degradation of Emerging Contaminants: A Review of Advances and Prospects

The discharge of emerging pollutants in the industrial process poses a severe threat to the ecological environment and human health. Photocatalytic self-Fenton technology combines the advantages of photocatalysis and Fenton oxidation technology through the in situ generation of hydrogen peroxide (H2O2) and interaction with iron (Fe) ions to generate a large number of strong reactive oxygen species (ROS) to effectively degrade pollutants in the environment. Graphite carbon nitride (g-C3N4) is considered as the most potential photocatalytic oxygen reduction reaction (ORR) photocatalyst for H2O2 production due to its excellent chemical/thermal stability, unique electronic structure, easy manufacturing, and moderate band gap (2.70 eV). Hence, in this review, we briefly introduce the advantages of the photocatalytic self-Fenton and its degradation mechanisms. In addition, the modification strategy of the g-C3N4-based photocatalytic self-Fenton system and related applications in environmental remediation are fully discussed and summarized in detail. Finally, the prospects and challenges of the g-C3N4-based photocatalytic self-Fenton system are discussed. We believe that this review can promote the construction of novel and efficient photocatalytic self-Fenton systems as well as further application in environmental remediation and other research fields.

Electron-Donor Functional Groups, Band Gap Tailoring, and Efficient Charge Separation: Three Keys To Improve the Gaseous Iodine Uptake in MOF Materials

Metal-organic frameworks (MOFs) have been largely investigated worldwide for their use in the capture of radioactive iodine due to its potential release during nuclear accident events and reprocessing of nuclear fuel. The present work deals with the capture of gaseous I₂ under a continuous flow and its subsequent transformation into I₃^- within the porous structures of three distinct, yet structurally related, terephthalate-based MOFs: MIL-125(Ti), MIL-125(Ti)_NH₂, and CAU-1(Al)_NH₂. The synthesized materials exhibited specific surface areas (SSAs) with similar order of magnitude: 1207, 1099, and 1110 m² g^-1 for MIL-125(Ti), MIL-125(Ti)_NH₂, and CAU-1(Al)_NH₂, respectively. Because of that, it was possible to evaluate the influence of other variables over the iodine uptake capacity─such as band gap energies, functional groups, and charge transfer complexes (CTC). After 72 h of contact with the I₂ gas flow, MIL-125(Ti)_NH₂ was able to trap 11.0 mol mol^-1 of I₂, followed by MIL-125(Ti) (8.7 mol mol^-1), and by CAU-1(Al)_NH₂ (4.2 mol mol^-1). The enhanced ability to retain I₂ in the MIL-125(Ti)_NH₂ was associated with a combined effect between its amino group (which has a great affinity toward iodine), its smaller band gap (2.5 eV against 2.6 and 3.8 eV for CAU-1(Al)_NH₂ and MIL-125(Ti), respectively), and its efficient charge separation. In fact, the presence of a linker-to-metal charge transfer (LMCT) mechanism in MIL-125(Ti) compounds separates the photogenerated electrons and holes into the two distinct moieties of the MOF: the organic linker (which stabilizes the holes) and the oxy/hydroxy inorganic cluster (which stabilizes the electrons). This effect was observed using EPR spectroscopy, whereas the reduction of the Ti⁴⁺ cations into the paramagnetic Ti³⁺ species was evidenced after irradiation of the pristine Ti-based MOFs with UV light (<420 nm). In contrast, because CAU-1(Al)_NH₂ exhibits a purely linker-based transition (LBT)─with no EPR signals related to Al paramagnetic species─it tends to exhibit faster recombination of the photogenerated charge carriers as, in this case, both electrons and holes are located over the organic linker. Furthermore, the transformation of the gaseous I₂ into I_n^- [n = 5, 7, 9, ...] intermediates and then into I₃^- species was evaluated using Raman spectroscopy by following the evolution of their respective bands at about 198, 180, and 113 cm^-1. This conversion─which is favored by an effective charge separation and smaller band gaps─increases the I₂ uptake capacity of the compounds by creating specific adsorption sites for these anionic species. In fact, because the -NH₂ groups act as an antenna to stabilize the photogenerated holes, both I_n^- and I₃^- are adsorbed into the organic linker via an electrostatic interaction with these positively charged entities. Finally, changes regarding the EPR spectra before and after the iodine loading were considered to propose a mechanism for the electron transfer from the MOFs structure to the I₂ molecules considering their different characteristics.

Copper(II)-Doped Two-Dimensional Titanium-Based Metal-Organic Frameworks toward Light-Driven CO2 Reduction to Value-Added Products

Recently, metal-organic framework (MOF)-based photocatalysts for an efficient CO₂ reduction reaction have drawn wide attention in multidisciplinary fields and sustainable chemistry. In this work, a series of Cu²⁺-doped two-dimensional Ti-based MOFs were fabricated by a facile in situ solvothermal method. Cu²⁺ ions were doped in equal proportions and uniformly dispersed in the crystal structure of the MOF matrix. Interestingly, the doping content of Cu²⁺ ions and the photocatalytic performance displayed an obvious volcanic relationship, the medium-concentration Cu²⁺-doped sample (T1-2Cu) held the greatest activity with 100% carbonaceous product (CH₄ and CO) formation, and the CH₄ production rate was 3.7 μmol g^-1 h^-1 with 93% electron selectivity. The band structure, local electronic structure, carrier separation kinetics, and CO₂ adsorption studies demonstrated that the excellent photocatalytic activity of T1-2Cu benefited from the appropriate amount of Cu²⁺ ion doping: (1) a doping amount of 2 atom % optimized the conduction band position of the MOF substrate and endowed T1-2Cu with strong reduction potential in thermodynamics, (2) doping Cu²⁺ ions tuned the local electronic environment around titanium oxide clusters and optimized the generation, separation, and migration processes of photoinduced carriers, and (3) the introduction of Cu²⁺ ions also provided more accessible active sites and more probabilities for the adsorption and activation of CO₂ reactants.

Photocatalytic degradation of cefixime in aqueous solutions using functionalized SWCNT/ZnO/Fe3O4 under UV-A irradiation

In this study, SWCNT/ZnO/Fe₃O₄ heterojunction composite was prepared for enhancing the degradation of β-lactam drugs such as cefixime (CFX) from an aqueous solution. The effects of several factors such as pH, initial concentration of CFX, and photocatalyst dose were investigated. Among them, pH was the most effective parameter for the degradation of CFX. Pareto graph revealed that the degradation process was accelerated at acidic conditions. The surface morphology test such as scanning electron microscopy (SEM) was applied to enlighten the surface of the functionalized SWCNT/ZnO/Fe₃O₄ photocatalyst. Highly advanced analyzes such as X-ray Photoelectron Spectroscopy (XPS), Energy Dispersive Spectrometry (EDX), Fourier-Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), and point of zero charge were included to explain the structure of the photocatalyst. The response surface methodology's results show that the optimum CFX efficiency was fully achieved at 94.19%. The optimal conditions with lower standard error (2.08) were given as pH of 5.93, 22.76 ppm of CFX, and 0.46 g L^-1 of the amount of photocatalyst. Besides, the obtained photocatalyst can be easily used many times owing to its high reusability. SWCNT/ZnO/Fe₃O₄ photocatalyst might be recommended to be used for the mineralizing of drug compounds such as antibiotics in water. Moreover, thiazol-2-ol, N-(dihydroxymethyl)-2-(2-hydroxythiazol-4-yl)acetamide,(S)-N-(2-amino-1-hydroxy-2-oxoethyl)-2-(2 hydroxythiazol-4-yl), and 2-(2-hydroxythiazol-4-yl)-N-((2R,3R)-2-mercapto-4-oxoazetidin-3-yl)acetamide were among the detected intermediates products from the cefixime degradation in the process.

One-Pot Thermal Synthesis of g-C3N4/ZnO Composites for the Degradation of 5-Fluoruracil Cytostatic Drug under UV-LED Irradiation

Graphitic carbon nitride (g-C₃N₄) was used to enhance the photocatalytic activity of ZnO nanoparticles for the degradation of 5-fluorouracil (5-FU) cytostatic drug under UV-LED irradiation. CN/ZnO composites were synthetized by an easy one-pot thermal method, varying the g-C₃N₄ loading, i.e., from 10 to 67 wt% and a post-thermal exfoliation in air. The physicochemical and optical properties of the materials were analyzed by several techniques. CN/ZnO composites showed a coral-like structure of spherical ZnO wurtzite particles on the g-C₃N₄ structure. In general, the synergism and heterojunction interface between both phases allowed the enhancement of the mesoporosity, light absorption ability, and the aromaticity of the corresponding composites. Moreover, the photocatalytic activity of the CN/ZnO composites was increased with the addition of g-C₃N₄ in comparison with pristine ZnO. The highest activity was found for the composite containing 25 wt% of g-C₃N₄ (i.e., CN25/ZnO), reaching the total degradation of 5-FU and a mineralization of 48% at 180 min, as well as a good photostability during four reuse cycles. Experiments with different pH solutions and scavengers allowed for the assessment of the reactive oxygen species (ROS) involved in the 5-FU degradation pathway, with radicals and non-radical species as the main responsible active species. Furthermore, a tentative photocatalytic mechanism was proposed for CN/ZnO composites.

Facile interface engineering of hierarchical flower spherical-like Bi-metal-organic framework microsphere/Bi2MoO6 heterostructure for high-performance visible-light photocatalytic tetracycline hydrochloride degradation

The self-assembled Bi-based metal-organic framework microspheres (Bi-MOF-M) by nanorods were successfully constructed by the glycol-assisted solvothermal method. Using Bi-MOF-M as a homologous template, a petal-like Bi₂MoO₆ (BMO) layer was grown in situ on its surface to facilely construct a chemically bonded heterojunction interface, realizing a micro/nano hierarchical flower spherical-like Bi-MOF-M/BMO heterojunction composite photocatalyst. The as-prepared series of Bi-MOF-M/BMO-x catalysts show higher visible light catalytic performance for tetracycline hydrochloride (TC) degradation. Among them, Bi-MOF-M/BMO-0.3 has the optimal catalytic activity, and the degradation efficiency can reach 93.6% within 60 min of light irradiation with superior mineralization ability and structural stability, and the degradation kinetic constant is 6.12 times that of Bi-MOF-M and 5.69 times that of BMO, respectively. The homologously grown Bi-MOF-M/BMO chemically bonded heterojunction not only effectively broadens the spectral absorption range and enhances the absorption intensity but also promotes the efficient separation of photogenerated carriers through forming a favorable interfacial electric field and well-matched energy band alignment. A reasonable mechanism for the visible light degradation of TC by the Bi-MOF-M/BMO composite catalyst with h⁺ and ¹O₂ as the main reactive species is proposed. The micro/nano hierarchical structure of the Bi-MOF/BMO catalyst allows it to exhibit the easy recovery advantage of micron-scale materials while maintaining the high catalytic activity of the primary nano-components.

Unraveling the photocatalytic electron transfer mechanism in a Ti-MOF/g-C3N4 heterojunction for high-efficient coupling performance of primary amines

An efficient Ti-MOF/g-C3N4 hetero-structure was prepared for the photocatalytic coupling of benzylamine under irradiation with 88% imine yield in 3 h.