Surface-constructing of visible-light Bi2WO6/CeO2 nanophotocatalyst grafted PVDF membrane for degradation of tetracycline and humic acid

In Situ Interfacial Engineering of CeO2/Bi2WO6 Heterojunction with Improved Photodegradation of Tetracycline and Organic Dyes: Mechanism Insight and Toxicity Assessment

The construction of heterojunction photocatalysts is an auspicious approach for enhancing the photocatalytic performance of wastewater treatment. Here, a novel CeO2/Bi2WO6 heterojunction is synthesized using an in situ liquid-phase method. The optimal 15% CeO2/Bi2WO6 (CBW-15) is found to have the highest photocatalytic activity, achieving a degradation efficiency of 99.21% for tetracycline (TC), 98.43% for Rhodamine B (RhB), and 94.03% for methylene blue (MB). The TC removal rate remained at 95.38% even after five cycles. Through active species capture experiments, •O2 -, h+, and •OH are the main active substances for TC, RhB, and MB, respectively. The possible degradation pathways for TC are analyzed using liquid chromatography-mass spectrometry (LC-MS). The photoinduced charge transfer and possible degradation mechanisms are proposed through experimentation and density functional theory (DFT) calculations. Toxicity assessment experiments show a significant reduction in toxicity during the TC degradation process. This study uncovers the mechanism of photocatalytic degradation in CeO2/Bi2WO6 and provides new insights into toxicity assessment.

Bi2WO6 nanoparticles anchored on membrane by grafting via in-situ polymerization for the treatment of antibiotic and pesticides wastewater

Antibiotics, natural organic matter, and pesticides are detected in the ecosystem's domestic water, surface water, and groundwater and are largely applied in pharmaceuticals and agriculture. Polymeric membranes are effectively remove the various pollutants in the water bodies, but fouling is one of the major limitations of commercial membranes. Herein, we modified the polymeric membrane surface with inorganic photocatalytic nanoparticles. In this work, the hydrothermal method is used for the synthesis of Bi2WO6 nanoparticles and as-synthesized nanoparticles grafted onto the various polymeric membranes, including polyetherimide (PEI), cellulose acetate (CA), polyvinylidene fluoride (PVDF), and polysulfone (PSF). The functional group studies confirmed the existence of nanoparticles and hydroxyl groups on the hybrid membrane. Further, finger-like voids, top-surface morphology, and roughness on the membrane surface were validated via Field Emission Scanning Electron Microscopy (FESEM) and Atomic force microscopy (AFM), respectively. The significant rejection of tetracycline, humic acid, and fulvic acid + atrazine was noted with the synthesized membranes in the following order: PVDF (81.1%, 78.8%, 80.6%) > CA (70.1%, 69.3%, 71.7%) > PSF (72.5%, 73.6%, 67.1%) > PEI (75.9%, 65.5%, 63.7%). The photodegradation efficiency of hybrid membranes against tetracycline, humic acid, and fulvic acid + atrazine was observed in the order: PEI (28.5%, 25.8%, 30.2%) < CA (46.5%, 42.4%, 40.5%) < PSF (46.9%, 37.7%, 44.7%) < PVDF (67.7%, 62.1%, 64.3%). These membranes exhibit an outstanding permeate flux recovery ratio to the neat membrane. Therefore, the grafting of Bi2WO6 nanoparticles creates a potential bonding with PVDF membranes than other polymeric membranes, thus exhibiting an outstanding rejection than hybrid and neat membranes.

Tetracycline removal from wastewater via g-C3N4 loaded RSM-CCD-optimised hybrid photocatalytic membrane reactor

In this study, a split-type photocatalytic membrane reactor (PMR), incorporating suspended graphitic carbon nitride (g-C3N4) as photocatalyst and a layered polymeric composite (using polyamide, polyethersulfone and polysulfone polymers) as a membrane was fabricated to remove tetracycline (TC) from aqueous solutions as the world's second most used and discharged antibiotic in wastewater. The photocatalyst was synthesised from melamine by ultrasonic-assisted thermal polymerisation method and, along with the membrane, was characterised using various methods, including Brunauer-Emmett-Teller analysis (BET), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction analysis (XRD), Field emission scanning electron microscopy (FESEM), and Ultraviolet-visible spectroscopy (UV-Vis). The PMR process was optimised, using Design-Expert software for tetracycline removal in terms of UV irradiation time, pH, photocatalyst loading, tetracycline concentration, and membrane separation iteration. It was revealed that a membrane-integrated reactor as a sustainable system could effectively produce clean water by simultaneous removal of tetracycline and photocatalyst from aqueous solution. The maximum removal of 94.8% was obtained at the tetracycline concentration of 22.16 ppm, pH of 9.78 with 0.56 g/L of photocatalyst in the irradiation time of 113.77 min after six times of passing membrane. The PMR system showed reasonable reusability by about a 25.8% drop in TC removal efficiency after seven cycles at optimal conditions. The outcomes demonstrate the promising performance of the proposed PMR system in tetracycline removal from water and suggest that it can be scaled as an effective approach for a sustainable supply of antibiotic-free clean water.

Synergy of Adsorption and Photocatalytic Reduction for Efficient Removal of Cr(VI) with Polyvinylidene Fluoride@Polyvinyl Alcohol-FeC2O4/Bi2.15WO6

Although the photocatalytic reduction of Cr(VI) to Cr(III) by traditional powder photocatalysts is a promising method, the difficulty and poor recovery of photocatalysts from water hinder their wide practical applications. Herein, we present that FeC2O4/Bi2.15WO6 (FeC2O4/BWO) composites were tightly bonded to modified polyvinylidene fluoride (PVDF) membranes by chemical grafting with the aid of polyvinyl alcohol (PVA) to form photocatalytic composite membranes (PVDF@PVA-FeC2O4/BWO). The contact angle of PVDF@PVA-FeC2O4/BWO (0.06 wt % of FeC2O4/BWO) is 48.0°, which is much lower than that of the pure PVDF membrane (80.5°). Meanwhile, the permeate flux of 61.43 g m-2 h-1 and water flux of 250.60 L m-2 h-1 were observed for PVDF@PVA-FeC2O4/BWO composite membranes. The tensile strength of composite membranes reached 48.84 MPa, which was 9.8 times higher than that of PVDF membrane. It was found that the PVDF@PVA-FeC2O4/BWO membrane exhibited excellent photocatalytic Cr(VI) reduction performance under both simulated and real sunlight irradiation. The adsorption for Cr(VI) by PVDF@PVA-FeC2O4/BWO can reach 47.6% in the dark process within 30 min, and the removal percentage of Cr(VI) could reach 100% with a rate constant k value of 0.2651 min-1 after 10 min of light exposure, indicating a synergistic effect of adsorption and photoreduction for Cr(VI) removal by the composite membrane. The PVDF@PVA-FeC2O4/BWO membrane had good stability and reusability after seven consecutive cycles. Most importantly, the influences of foreign ions on Cr(VI) reduction were investigated to mimic real sewage, which revealed that no obvious adverse effects can be found with the presence of common foreign ions in sewage. The photocatalytic membrane material developed in this study provides a new idea for treating Cr(VI)-containing wastewater and has a more significant application prospect.

Ultrathin g-C3N4 composite Bi2WO6 embedded in PVDF UF membrane with enhanced permeability, anti-fouling performance and durability for efficient removal of atrazine

A novel Bi₂WO₆-g-C₃N₄/polyvinylidene fluoride (PVDF) composite ultrafiltration (UF) membrane (BWO-CN/PVDF) was prepared by microwave hydrothermal and immersion precipitation phase transformation method. The BWO-CN/PVDF-0.10 exhibited an outstanding photocatalytic removal rate of atrazine (ATZ) (97.65 %) under the simulated sunlight and enhanced permeate flux (1356.09 L·m^-2·h^-1). The multiple optical and electrochemical detection confirmed that combining ultrathin g-C₃N₄ and Bi₂WO₆ can increase carrier separation rate and prolong its lifetime. The quenching test revealed that h⁺ and ¹O₂ were the prominent reactive species. Additionally, after a 10-cycle photocatalytic process, the BWO-CN/PVDF membrane presented remarkable reusability and durability. And it showed excellent anti-fouling performance by filtering BSA, HA, SA, and Songhua River under simulated solar irradiation. The molecular dynamic (MD) simulation showed that the combination of g-C₃N₄ and Bi₂WO₆ can enhance the interaction between BWO-CN and PVDF. This work opens up a new idea for designing and constructing a highly efficient photocatalytic membrane for water treatment.

A bimetallic MOF-derived α-Fe2O3/In2O3 heterojunction for a cyclohexane gas sensor

The α-Fe2O3/In2O3 heterojunctions derived from a bimetal–organic framework of an InFc MOF, endows a high sensitivity (86) to 100 ppm cyclohexane at a working temperature of 225 °C, in the top set for similar types of sensors.

Sonocatalytic degradation of ciprofloxacin and organic pollutant by 1T/2H phase MoS2 in Polyvinylidene fluoride nanocomposite membrane

The development of recyclable catalysts with effective properties and stable reusability is great importance for the removal of different types of pollutants in wastewater. Herein, we have synthesized Polyvinylidene fluoride (PVDF) polymer and mixed-phase 1T/2H MoS₂ for immobilizing the sonocatalyst material. Techniques such as FESEM, XRD, FTIR, XPS, and UV-vis spectra have been used for analyzing the structural, and morphological properties. The formation of a 1T/2H mixed phase in MoS₂ has been revealed by XRD and XPS analysis. Consequently, the sonocatalytic performance of the nanocomposite membrane was investigated through ciprofloxacin (CIP) and organic pollutants (Rhodamine B (RhB)). As a result, MoS₂/PVDF (PM4) nanocomposite membrane exhibited a superior sonocatalytic activity with 94.37% and 84.37% of RhB and CIP degradation efficiency with pseudo-first-order kinetic constant (k) of 0.0187 min^-1, and 0.0044 min^-1. The sonocatalytic property of the nanocomposite membrane is related to 1T/2H mixed-phase and PVDF. Additionally, the metallic based 1T phase MoS₂ helps to promote electrons and holes and reduce the recombination rate. Moreover, it promotes the generation of more hydroxy radicals (^.OH), and superoxide radicals (∙O₂^-) play a significant role in sonocatalytic degradation of RhB pollutants. Thus, the improved sonocatalytic degradation of 1T/2H MoS₂/PVDF composite membrane exhibited its application in real-time wastewater treatment.

Surface-initiated polymerization of PVDF membrane using amine and bismuth tungstate (BWO) modified MIL-100(Fe) nanofillers for pesticide photodegradation

Pirimicarb as a pesticide is used to control the aphids in the agriculture field; however, it affects the groundwater ecosystem by leaching through the soil profile. The post-synthetic amine and BWO modified MIL-100 (Fe) nanofillers were synthesized. The photocatalytic property of amine-functionalized and BWO@MIL-100(Fe) nanofillers was confirmed by the lesser bandgap energy than the unmodified MIL-100 (Fe) nanofiller. Herein, we constructed a nanofillers grafted PVDF membrane via in-situ polymerization technique for the pirimicarb reduction and photodegradation. Furthermore, the nanofiller's grafted membranes were characterized by FESEM, XRD, FTIR, and contact angle analysis. The carboxylic acid peak was observed on the FTIR which demonstrated the PAA grafted on the membrane surface and similar crystalline peaks evident that the nanofillers were grafted on the membrane surface. Furthermore, surface morphology studies have exhibited the dispersion of nanofillers and enhanced microvoids in the cross-section of the membrane. The decrease in the water contact angle of the membrane depicted the improved antifouling properties and surface energy. The nanofiller's grafted membranes have shown higher hydrophilicity correlated well with the enhanced pure water flux in the order M4 > M5 > M2 > M3 > M6 > M7 compared to the neat membrane (M1). In BWO@MIL-100(Fe) membrane has shown a higher permeate flux (25.99 L m^-2.h^-1) than the neat PVDF membrane. The BWO@MIL-100(Fe) grafted PVDF membrane has also shown excellent pirimicarb photodegradation of 81% at pH 5. The proposed MIL-100 (Fe) and bismuth tungsten nanocomposite will pave the way for the different MOF-based photocatalytic materials for membrane-based pesticide degradation.

Piezotronic Effect-Assisted Photoelectrochemical Exosomal MicroRNA Monitoring Based on an Electron Donor Self-Supplying Strategy

Exosomal microRNAs (miRNAs) as newly emerging reliable and noninvasive biomarkers have demonstrated a significant function in early cancer diagnosis. Photoelectrochemical (PEC) biosensing has attracted unprecedented attention in exosomal miRNA monitoring due to its inherent advantages of both electrochemical and optical techniques; however, the severe charge carrier recombination greatly restricts the PEC assay performance. Herein, a high-sensitive PEC strategy assisted by the piezoelectric effect is designed based on Bi₂WO₆/Cu₂S heterojunctions and implemented for the monitoring of exosomal miRNAs. The introduction of the piezoelectric effect enables promoted electron-hole transfer and separation, thereby improving the analytical sensitivity. In addition, a target reprogramming metal-organic framework-capped CaO₂ (MOF@CaO₂) hybrids is prepared, in which MOF@CaO₂ being responsive to exosomal miRNAs induces exposure of the capped CaO₂ to H₂O and then triggers self-supplying of H₂O₂, which effectively suppresses the electron-hole recombination, giving rise to an amplified photocurrent and a decrease in the cost of the reaction. Benefiting from the coupled sensitization strategy, the as-fabricated PEC strategy exhibits high sensitivity, specificity, low cost, and ease of use for real-time analysis of exosomal miRNAs within the effectiveness linear range of 0.1 fM-1 μM. The present work demonstrates promising external field coupling-enhanced PEC bioassay and offers innovative thoughts for applying this strategy in other fields.

Tin bisulfide nanoplates anchored onto flower-like bismuth tungstate nanosheets for enhancement in the photocatalytic degradation of organic pollutant

The development of efficient heterojunctions through a simple and facile method is an effective way to enhance the photocatalytic performance of bismuth-based oxide semiconductors for industrial applications. Here, the novel flower-like type II SnS₂/Bi₂WO₆ heterostructure consisting of bismuth tungstate (Bi₂WO₆) nanosheets and tin bisulfide (SnS₂) nanoplates was successfully designed and synthesized. The crystal structure, composition, morphology, and photoelectric properties of the heterostructure were systematically characterized. In addition, the photocatalytic activity of SnS₂/Bi₂WO₆ was analyzed and compared with Bi₂WO₆ or SnS₂ alone or physical mixture of SnS₂ and Bi₂WO₆. 2%SnS₂/Bi₂WO₆ presents a 3.1 times greater degradation rate constant (0.0065 min^-1) than that of Bi₂WO₆ (0.0021 min^-1) under low visible light irradiation (5.3 mW·cm^-2, a 44 W LED), while SnS₂ alone exhibits no photocatalytic effect toward glyphosate. Furthermore, 2%SnS₂/Bi₂WO₆ maintains 93% of its original photocatalytic activity even after four cycles. The possible photocatalytic degradation pathway of glyphosate and photocatalytic mechanism are also proposed. The excellent photocatalytic performance of SnS₂/Bi₂WO₆ is attributed to the decoration of SnS₂ nanoplates on the surface of Bi₂WO₆, appropriate (113)/(020) ratio, increased visible-light absorption, and effective separation of photoinduced carriers. This paper reports a new methodology that can act as a reference basis to design and develop visible-light responsive photocatalysts with outstanding photocatalytic performance for carbon dioxide reduction, water splitting, and pollutant degradation.

Removal of protein, histological dye and tetracycline from simulated bioindustrial wastewater with a dual pore size PPSU membrane

Wastewater from production of active pharmaceutical ingredients (APIs) often contains proteins, azo dyes or antibiotics, which cause severe water eutrophication and growth of drug-resistant bacteria. A series of polyphenylsulfone (PPSU) membranes was prepared to determine the relationships between pore structures and the abilities of different membranes to separate foulants, and the characteristics and performance of the ultrafiltration membranes were investigated. The structure of the skin layer and the cross-sectional texture were converted from dense and finger-like macrovoids to porous sponge shapes because of a delayed liquid-liquid (L-L) demixing time. Formation of novel PPSU membranes via noncovalent bonding interactions was evaluated, and this selectively affected the membrane surface pore structure, layer thickness, surface polarity and electronic repulsive force. All PPSU membranes demonstrated excellent rejection of organic foulants, including bovine serum albumin (BSA) (~100% rejection) and acid red 1 (AR1) (~90% rejection). Additionally, M5 provided an excellent tetracycline (TC) rejection efficiency of 89% in the 1^st cycle. Due to the small size of TC, pore size effects were displayed. Moreover, the pure water flux recovery rate (FRR) increased from 85% (M1, water/ethanol: 100/0) to 99.9% (M4, water/ethanol: 30/70) after BSA filtration because the weak nonsolvent decreased the roughness of the membrane surface, and the membrane made with added EtOH yielded excellent FRR values (99.9%) after AR1 filtration. Therefore, PPSU membranes successfully achieved over 90% rejection of organic foulants and excellent FRRs, indicating that they may be suitable for purifying wastewater from API plants that generate organic foulants with a wide range of sizes.

Evaluation of membrane tailored with biocompatible halloysite‒polyaniline nanomaterial for efficient removal of carcinogenic disinfection by‒products precursor from water

Humic acid (HA) is the main component of natural organic matter that generates carcinogenic by‒products during disinfection and its removal from water resources is challenging. Biocompatible halloysite (HNTs) nanomaterial decorated with polyaniline (HNTs‒PANI) was synthesized via polymerization technique. HNTs‒PANI was added to prepare polyethersulfone mixed matrix membranes (MMMs). The influence of HNTs‒PANI concentration on HA removal efficiency was studied by varying the HNTs‒PANI (0.5, 1 and 1.5 wt%). The characterization studies of MMMs revealed that the addition of HNTs‒PANI improved the morphology of the membranes, surface properties, chemical stability and thermal property. The amine and hydroxyl groups within the MMMs improved the membrane wettability. The addition of HNTs‒PANI within the MMMs had significantly enhanced the pure water flux and HA filtration. YHP2 MMM with 1 wt% of HNTs‒PANI demonstrated sieving coefficient of 0.10 and the highest HA removal efficiency of 91% greater than the neat PES membrane. Furthermore, the antifouling property of the MMMs was studied using HA as foulant. 1 wt% of HNTs‒PANI added MMM showed a high flux recovery ratio (94.9%) with low total fouling of 12% and low irreversible fouling of 5%, respectively. Thus, HNTs‒PANI was an efficient nanomaterial for enhancing the pure water flux, removal efficiency and antifouling property to treat water contaminated with HA.