Enrichment of diamide insecticides from environmental water samples using metal-organic frameworks as adsorbents for determination by liquid chromatography tandem mass spectrometry

Diamide insecticides in PM2.5: The unreported rural and urban air pollutants

The broad application of various pesticides guarantees the development of agriculture all over the word but has ultimately led to their ubiquitous release into the environment as hazardous chemical residues. Diamide insecticides (DAIs) are regarded as new choice for prevention and protection of agricultural crops and city landscaping plants from the pests in more and more countries. However, their presence in fine particulate matter (PM2.5) and associated health risks have not been studied. We reported for the first time the extensive distributions of PM2.5-bound DAIs in rural and urban areas of China, one of the world's largest agricultural countries. Eight DAIs were analyzed, and five were consistently detected in PM2.5 samples at concentrations primarily of pg m-3 level. Evident spatial/temporal variations were observed, with generally more serious DAIs' contamination and long-term health risks in rural areas during spring, summer and autumn. The first exploration of DAIs' toxicities on human bronchial epithelial cells discovered their capability of inhibiting cell viabilities, further demonstrating the potential detrimental effects of these emerging pollutants in PM2.5. This study confirms the widespread appearance of DAIs in PM2.5, emphasizing the need and urgency for concern about their pollution in both rural and urban air.

Effects of anthranilic diamide insecticides on metamorphosis in the common toad Rhinella arenarum (Hensel, 1867) at concentrations found in aquatic environments

Anthranilic diamides (AD) are a modern class of insecticides used as alternatives to pyrethroids and neonicotinoids, particularly against lepidopteran pests. Despite their widespread use and presence in surface waters, little is known regarding their effects on amphibians. The aim of this study was to examine the effects of environmentally-relevant concentrations of AD insecticides chlorantraniliprole (CHLO) and cyantraniliprole (CYAN) on metamorphosis of the toad Rhinella arenarum. Tadpoles were exposed to CHLO or CYAN at concentrations ranging from 5 and 5000 µg/L from stage 27 until metamorphosis completion. Both insecticides produced a non-monotonic acceleration of the time required for individuals to progress through development and a decrease in the proportion of individuals completing metamorphosis, although a delay in metamorphosis was also observed at 5 µg/L of CHLO. Snout-vent length and body weight of metamorphosed toads were not markedly affected by either insecticide. CHLO was more toxic than CYAN, with a lowest observed effect concentration (LOEC) for CHLO on time to metamorphosis defined as 5 µg/L compared to 5000 µg/L for CYAN. The LOEC for reduced metamorphic success defined as 50 µg/L for CHLO compared to 500 µg/L for CYAN. As most effects occurred after stage 39, when metamorphosis depends upon thyroid hormones, it is conceivable that that AD insecticides act as endocrine disruptors. These findings suggest that contamination of surface waters with CHLO and CYAN may disrupt amphibian development in the wild and warrant further research to investigate the possibility of endocrine-disruption by ADs.

Magnetic molecularly imprinted polymers integrated ionic liquids for targeted detecting diamide insecticides in environmental water by HPLC-UV following MSPE

Efficiently detecting diamide insecticides in environmental water is challenging due to their low concentrations and complex matrix interferences. In this study, we developed ionic liquids (ILs)-incorporated magnetic molecularly imprinted polymers (IL-MMIPs) for the detection of diamide insecticides, capitalizing on the advantages of ILs and quick magnetic separation through surface imprinting. Tetrachlorantraniliprole was used as the template, and a specific IL, 1-vinyl-3-ethylimidazolium hexafluorophosphate ([VEIm][PF6]), was employed as the functional monomer. Various synthesis conditions were investigated to optimize adsorption efficiency. The prepared IL-MMIPs were successfully employed as adsorbents in magnetic solid-phase extraction (MSPE) to selectively extract, separate, and quantify three types of diamide insecticides from water samples using HPLC-UV detection. Under optimal conditions, the analytical method achieved low limits of detection (0.69 ng mL-1, 0.64 ng mL-1, 0.59 ng mL-1 for cyantraniliprole, chlorantraniliprole and tetrachlorantraniliprole, respectively). The method also displayed a wide linear range (0.003-10 μg mL-1 for cyantraniliprole and chlorantraniliprole, and 0.004-10 μg mL-1 for tetrachlorantraniliprole, respectively) with satisfactory coefficients (R2≥0.9996), and low relative standard deviation (RSD≤2.55%). Additionally, extraction recoveries fell within the range of 79.4%-109%. The results clearly demonstrate that IL-MMIPs exhibit exceptional recognition and rebinding capabilities. The developed IL-MMIPs-MSPE-HPLC-UV method is straightforward and rapid, making it suitable for the detection and analysis of three kinds of diamide insecticides in environmental water.

Synthesis of in-situ magnetized MOF-cellulose membranes for high-efficiency enrichment of diamide insecticides in vegetables and determination by LC-MS/MS

This study presents a novel, eco-friendly composite adsorbent material designed for the magnetic solid-phase extraction of diamide insecticides from vegetable samples. The membrane, denoted as Fe-MMm, was incorporated with a cellulose framework embedded with Metal-Organic Frameworks (MOFs) and Multi-Walled Carbon Nanotubes (MWCNTs) magnetized with Fe3O4. This innovative material streamlined the conventional solid-phase extraction process, simplifying the sample pre-treatment. By combining it with liquid chromatography tandem mass spectrometry (LC-MS/MS), the method achieves significantly enhanced extraction efficiency through systematic optimization of experimental parameters, including adsorbent selection, pH, ionic strength, adsorption time, and elution time. The method had a wide linear range of 0.1-1000 ng/mL and an exceptionally low detection limit ranging from 0.023 to 0.035 ng/mL. The successful identification of diamide insecticides in vegetable samples underscores the potential of Fe-MMm as a robust material for sample pretreatment in analytical applications.

Chlorantraniliprole in foods: Determination, dissipation and decontamination

Chlorantraniliprole (CAP) is the first commercially available anthranilic diamide insecticide that targets ryanodine receptors. However, excessive use of CAP can lead to persistent contamination on treated foods and adverse effects on human wellness. The current review focuses on CAP residue analysis in foods by using chromatographic techniques. QuEChERS (quick, easy, cheap, effective, rugged and safe) is the most widely used sample preparation strategy and liquid chromatography tandem mass spectrometry is the predominant analytical method for various food matrices including vegetable, fruit, grain, fish and so on. Moreover, this review summarizes the dissipation pattern of CAP on foods and found it usually dissipates fast on plant in open-field environment. For decontamination, common culinary cleaning methods could effectively remove CAP from vegetables. Finally, some new directions are proposed for better advancement.

Fe3O4/ZIFs-based magnetic solid-phase extraction for the effective extraction of two precursors with diverse structures in aflatoxin B1 biosynthetic pathway

The aflatoxin B₁ (AFB₁) early warning technique based on precursors is an effective strategy for the prevention of AFB₁ contamination risk. The determination of precursors is imperative to ensure the efficiency of the early warning technique. Herein, a controllable magnetic adsorbent Fe₃O₄/ZIFs was first introduced for the effective extraction and determination of averantin (AVN) and sterigmatocystin (ST) precursors in cereal by combining magnetic solid-phase extraction (MSPE) and high-performance liquid chromatography (HPLC). Benefiting from the abundant adsorption sites and multifunctional groups matching the analytes, Fe₃O₄/ZIFs effectively and simultaneously extracted AVN and ST with great differences in polarity and structure via multiple interactions. AVN was extracted by Fe₃O₄/ZIFs mainly through π-π and hydrophobic interactions, while ST was extracted predominantly by electrostatic interactions and surface complexation. The limits of detection were 0.08 μg kg^-1 (AVN) and 0.36 μg kg^-1 (ST). The developed method exhibited satisfactory spiked recoveries (79.1%-105.4%) in the determination of AVN and ST in rice. This work provides a novel analytical strategy for further studying AFB₁ early warning technique and the formation and transformation of aflatoxins.

Simultaneous Determination of Neonicotinoid and Carbamate Pesticides in Freeze-Dried Cabbage by Modified QuEChERS and Ultra-Performance Liquid Chromatography-Tandem Mass Spectrometry

Dehydrated vegetables are popular in instant foods, but few reports have focused on their pesticide residues. This research developed and validated a modified QuEChERS method combined with ultra-performance liquid chromatography-tandem mass spectrometry to determine 19 kinds of neonicotinoid and carbamate pesticides in freeze-dried cabbage. Herein, acetonitrile/water (v/v = 2:1) was selected in the extraction step. Meanwhile, 4 g anhydrous magnesium sulfate and 1 g sodium chloride were applied to the partitioning step. Dispersive solid-phase extraction sorbents were selected, and liquid chromatography conditions were further optimized for dealing with the matrix effect. The limits of quantification ranged from 1.0 to 10.0 μg/kg. The validation results were acceptable, with average recoveries of 78.7-114.0% and relative standard deviations below 14.2%. The method recoveries were closely related to the volume proportion of water in the extractant. Finally, the developed method was applied to real freeze-dried cabbages and four pesticides (propamocarb, imidacloprid, acetamiprid, and thiacloprid) were detected in six samples.

Metal-organic frameworks-based microtrapper for real-time monitoring of targeted analyte and mechanism study

Interstitial fluid (ISF) provides important information of clinical value and physiological significance beyond blood tests for obtaining more precise health information and disease theranostics. Generally, current strategies are limited to simple extraction with time-consuming follow-up procedures. Facing challenges in efficient and real-time monitoring of target analytes in transdermal ISF, we develop metal-organic framework (MOF)-functionalized microneedle (MN) patches to achieve efficient antibiotics sampling, coupling direct analysis in real time mass spectrometry (DART-MS). The MOF MN microtrapper is constructed in a double-layered structure with a hard core and a better tissue penetration was accomplished. The MOF-based microtrapper manifests good in-vitro and in-vivo antibiotics tracking capability with a semi-quantitative method established. Moreover, the hydrogen-bond driven interaction is clarified by using molecular dynamics simulations (MDS) and related computational analysis. Good penetration safety is confirmed by histological analysis with promising clinical transnationality. We anticipate MOF MN-based microdevices provide a versatile minimally invasive strategy for transdermal ISF extraction and an extendable platform for a range of target molecules monitoring, including drugs, metabolites, biomarkers, et c, with promising clinical transnationality.

Metal-organic frameworks for food contaminant adsorption and detection

Metal-organic framework materials (MOFs) have been widely used in food contamination adsorption and detection due to their large specific surface area, specific pore structure and flexible post-modification. MOFs with specific pore size can be targeted for selective adsorption of some contaminants and can be used as pretreatment and pre-concentration steps to purify samples and enrich target analytes for food contamination detection to improve the detection efficiency. In addition, MOFs, as a new functional material, play an important role in developing new rapid detection methods that are simple, portable, inexpensive and with high sensitivity and accuracy. The aim of this paper is to summarize the latest and insightful research results on MOFs for the adsorption and detection of food contaminants. By summarizing Zn-based, Cu-based and Zr-based MOFs with low cost, easily available raw materials and convenient synthesis conditions, we describe their principles and discuss their applications in chemical and biological contaminant adsorption and sensing detection in terms of stability, adsorption capacity and sensitivity. Finally, we present the limitations and challenges of MOFs in food detection, hoping to provide some ideas for future development.

Multi-template imprinted solid-phase microextraction coupled with UPLC-Q-TOF-MS for simultaneous monitoring of ten hepatotoxic pyrrolizidine alkaloids in scented tea

Pyrrolizidine alkaloids (PAs) are a series of ubiquitous natural toxins in flowering plants, which are associated with serious hepatic disease in humans. However, the simultaneously fast and sensitive monitoring of different PAs are still challenge because of the diversity of PAs and huge amount of interference in complex samples, such as scented tea samples. In this study, molecularly imprinted solid phase microextraction (MIP-SPME) fibers were fabricated by using multi-template imprinting technique for selective recognition and efficient enrichment of different PAs from scented teas. MIP-SPME could be used for selective adsorption of ten types of PAs through specific recognition cavity and strong ionic interaction, including senecionine, lycopsamine, retrorsine, heliotrine, lasiocarpine, monocrotaline, echimidine, erucifoline, europine and seneciphylline. The extraction parameters were also optimized including extraction time, elution solvent and elution time. Then, ultra performance liquid chromatography- quadrupole-time of flight mass spectrometry (UPLC-Q-TOF-MS) coupled with MIP-SPME method was developed for fast, simple, sensitive and accurate determination of ten PAs in scented teas. The established method was validated and presented satisfactory accuracy and high precision. It was also successfully applied for simultaneous determination of ten PAs in different scented tea samples. PAs were found in most of these scented tea samples, which suggest the cautious use of scented tea for consumers.

Construction of a magnetic solid-phase extraction method for the analysis of azole pesticides residue in medicinal plants

In this work, a sensitive and cost-effective method for the quantitative analysis of azole pesticides residues in six medicinal plants was established based on magnetic cyclodextrin crosslinked with tetrafluoroterephthalonitrile (Fe₃O₄@TFN-CDPs) coupled with high-performance liquid chromatography (HPLC). Through characterization analysis, the outer shell of Fe₃O₄@TFN-CDPs has observed coating with a network of the polymer and forming a core-shell structure. Under the optimum conditions, the limits of detection (LODs) and limits of qualification (LOQs) of target pesticides were ranged from 0.011 to 0.106 µg Kg^-1 and from 0.036 to 0.354 µg Kg^-1, respectively. Finally, the achieved recoveries of pesticides in six medicinal samples fluctuated from 60.1% to 102.3%. Altogether, this method based on Fe₃O₄@TFN-CDPs composites provided a new idea for the analysis of trace pesticides in complicated matrices.

Development of a Simple, Underivatized Method for Rapid Determination of Free Amino Acids in Honey Using Dilute-and-Shoot Strategy and Liquid Chromatography-Tandem Mass Spectrometry

A simple, fast and reliable analytical method was developed for 20 free amino acids (FAAs) determination in honey samples through a dilute-and-shoot strategy and hydrophilic interaction liquid chromatography tandem mass spectrometry. Compared with previous reports, direct dilution by water has significantly reduced the matrix effect and facilitated full extraction of FAAs. Further, a 5 min determination method was established with an acetonitrile–water mobile phase system with 0.1% formic acid addition. The established method was validated and demonstrated several advantages including short detection time, wide linear range over 3–4 orders of magnitude, high sensitivity down to 0.1 ng/mL and negligible matrix effect. Twenty FAAs were determined in 10 honey samples from different botanical origins by this method, and 19 FAAs were found. This general applicable method was also promising for fast determination of FAAs in other practical samples.

Preparation of beta-cyclodextrin based nanocomposite for magnetic solid-phase extraction of organic ultraviolet filters

A simple and efficient analytical method for organic UV filters (UV-Fs) in environmental samples has been established in this study. Taking advantage of the hydrophobicity on the inner cavity, hydrophilicity on the outer wall, and host-guest interaction provided by beta-cyclodextrin, a core-shell magnetic extraction material was firstly synthesized by using a facile method. The extractant was utilized in magnetic solid-phase extraction of UV-Fs in complex environmental samples, including beach sand, sediment and river water samples, followed by the quantitation using high-performance liquid chromatography. A series of factors affecting extraction efficiencies of seven UV-Fs were profoundly optimized. Under the optimal conditions, the linear ranges were at 5.0-5.0 × 10² ng mL^-1 for the UV-Fs with regression coefficients (r) at 0.9984-0.9998. The limits of detection were from 0.12 to 1.4 ng mL^-1. The recoveries were in the range of 84.2-109%. Furthermore, the molecular dynamics simulations and independent gradient model analysis were applied to reveal the adsorption configuration and interaction mechanisms between target analytes and the sorbent.