Ultrasound-assisted electrochemical treatment of cosmetic industry wastewater: Mechanistic and detoxification analysis

Electrooxidation of amoxicillin in aqueous solution with graphite electrodes: Optimization of degradation and deciphering of byproducts using HRMS

Contaminants of emerging concern (CECs) such as antibiotics have become a matter of worry in aquatic environments worldwide. Their presence in the environment has been increasing due to the inability of conventional wastewater and water treatments to annihilate them. Hence, attempts have been made to remove CECs using electrochemical oxidation (EO). Present study employed the low cost, active carbon based graphite sheet electrodes as anode and cathode to oxidize and degrade Amoxicillin (AMOX)- a β-lactum thiazolidine antibiotic. Optimization studies found pH 9, 45 mA cm-2, 81 cm2 electrode surface area, 6 mM electrolyte concentration and 60 min treatment time to be optimal for AMOX removal. Studies with varying concentrations of AMOX (20 mg L-1, 30 mg L-1 and 40 mg L-1) found that increase in concentrations of AMOX require higher current densities and treatment time for better TOC removal. High performance liquid chromatography photo diode array (HPLC-PDA) studies found 94% removal for 40 mg L-1 of AMOX at optimal conditions with 90% COD and 46% TOC removal. High resolution mass spectrometry (HRMS) studies using Ultra performance liquid chromatography-quadrupole time of flight-mass spectrometry (UPLC-Q-ToF-MS) identified major degradation mechanisms to be hydroxylation, β-lactum ring cleavage, breakage of thiazolidine ring chain from the aromatic ring and piperazinyl ring formation. The final byproducts of AMOX oxidation were carboxylic acids.

Sustainable application of electrocatalytic and photo-electrocatalytic oxidation systems for water and wastewater treatment: a review

Wastewater treatment and reuse have risen as a solution to the water crisis plaguing the world. Global warming-induced climate change, population explosion and fast depletion of groundwater resources are going to exacerbate the present global water problems for the forthcoming future. In this scenario, advanced electrochemical oxidation process (EAOP) utilising electrocatalytic (EC) and photoelectrocatalytic (PEC) technologies have caught hold of the interest of the scientific community. The interest stems from the global water management plans to scale down centralised water and wastewater treatment systems to decentralised and semicentralised treatment systems for better usage efficiency and less resource wastage. In an age of rising water pollution caused by contaminants of emerging concern (CECs), EC and PEC systems were found to be capable of optimal mineralisation of these pollutants rendering them environmentally benign. The present review treads into the conventional electrochemical treatment systems to identify their drawbacks and analyses the scope of the EC and PEC to mitigate them. Probable electrode materials, potential catalysts and optimal operational conditions for such applications were also examined. The review also discusses the possible retrospective application of EC and PEC as point-of-use and point-of-entry treatment systems during the transition from conventional centralised systems to decentralised and semi-centralised water and wastewater treatment systems.

Ultrasound-based advanced oxidation processes for landfill leachate treatment: Energy consumption, influences, mechanisms and perspectives

Advanced oxidation processes (AOPs) based on ultrasound (US) have attracted considerable attention in recent years due to its advantages in the degradation of landfill leachate. The review summarizes the existing treatment methods of leachate from lab-scale, compares their advantages and disadvantages by focusing on the degradation of emerging contaminants (ECs) in the leachate. Then the US-based AOPs are introduced emphatically, including their degradation mechanisms, influencing factors, energy consumption, further optimization methods as well as the possibility of field-scale application are systematically described. Moreover, this review also expounds on the advantages of dual-frequency US (DFUS) technology compared with single-frequency US, and a theoretically feasible DFUS process is proposed to treat ECs in the leachate. Finally, suggestions and prospects for US technologies in treating landfill leachate are put forward to aid future research on landfill leachate treatment. Meaningfully, this manuscript will provide reference values of US-based technologies in landfill leachate treatment for the practical use, facilitating the development of US-based AOPs in landfill leachate management and disposal.

Comprehensive understanding of electrochemical treatment systems combined with biological processes for wastewater remediation

The presence of toxic pollutants in wastewater discharge can affect the environment negatively due to presence of the organic and inorganic contaminants. The application of the electrochemical process in wastewater treatment is promising, specifically in treating these harmful pollutants from the aquatic environment. This review focused on recent applications of the electrochemical process for the remediation of such harmful pollutants from aquatic environments. Furthermore, the process conditions that affect the electrochemical process performance are evaluated, and the appropriate treatment processes are suggested according to the presence of organic and inorganic contaminants. Electrocoagulation, electrooxidation, and electro-Fenton applications in wastewater have shown effective performance with high removal rates. The disadvantages of these processes are the formation of toxic intermediate metabolites, high energy consumption, and sludge generation. To overcome such disadvantages combined ecotechnologies can be applied in large-scale wastewater pollutants removal. The combination of electrochemical and biological treatment has gained importance, increased removal performance remarkably, and decreased operational costs. The critical discussion with depth information in this review could be beneficial for wastewater treatment plant operators throughout the world.

Sonoelectrochemical oxidation of sulfamethoxazole in simulated and actual wastewater on a piezo-polarizable FTO/BaZr x Ti(1-x)O3 electrode: reaction kinetics, mechanism and reaction pathway studies

The sonoelectrochemical (SEC) oxidation of sulfamethoxazole (SMX) in simulated and actual wastewater on FTO/BaZr_(0.1)Ti_(0.9)O₃, FTO/BaZr_(0.05)Ti_(0.95)O₃ and FTO/BaTiO₃ electrodes is hereby presented. Electrodes from piezo-polarizable BaZr_(0.1)Ti_(0.9)O₃, BaZr_(0.05)Ti_(0.95)O₃, and BaTiO₃ materials were prepared by immobilizing these materials on fluorine-doped tin dioxide (FTO) glass. Electrochemical characterization performed on the electrodes using chronoamperometry and electrochemical impedance spectroscopy techniques revealed that the FTO/BaZr_(0.1)Ti_(0.9)O₃ anode displayed the highest sonocurrent density response of 2.33 mA cm^-2 and the lowest charge transfer resistance of 57 Ω. Compared to other electrodes, these responses signaled a superior mass transfer on the FTO/BaZr_(0.1)Ti_(0.9)O₃ anode occasioned by an acoustic streaming effect. Moreover, a degradation efficiency of 86.16% (in simulated wastewater), and total organic carbon (TOC) removal efficiency of 63.16% (in simulated wastewater) and 41.47% (in actual wastewater) were obtained upon applying the FTO/BaZr_(0.1)Ti_(0.9)O₃ electrode for SEC oxidation of SMX. The piezo-polarizable impact of the FTO/BaZr_(0.1)Ti_(0.9)O₃ electrode was further established by the higher rate constant obtained for the FTO/BaZr_(0.1)Ti_(0.9)O₃ electrode as compared to the other electrodes during SEC oxidation of SMX under optimum operational conditions. The piezo-potential effect displayed by the FTO/BaZr_(0.1)Ti_(0.9)O₃ electrode can be said to have impacted the generation of reactive species, with hydroxyl radicals playing a predominant role in the degradation of SMX in the SEC system. Additionally, a positive synergistic index obtained for the electrode revealed that the piezo-polarization effect of the FTO/BaZr_(0.1)Ti_(0.9)O₃ electrode activated during sonocatalysis combined with the electrochemical oxidation process during SEC oxidation can be advantageous for the decomposition of pharmaceuticals and other organic pollutants in water.

Exolaccase-boosted humification for agricultural applications

Globally, phenolic contaminants have posed a considerable threat to agro-ecosystems. Exolaccase-boosted humification may be an admirable strategy for phenolic detoxification by creating multifunctional humic-like products (H-LPs). Nonetheless, the potential applicability of the formed H-LPs in agricultural production is still overlooked. This review describes immobilized exolaccase-enabled humification in eliminating phenolic pollutants and producing artificial H-LPs. The similarities and differences between artificial H-LPs and natural humic substances (HSs) in chemical properties are compared. In particular, the agronomic effects of these reproducible artificial H-LPs are highlighted. On the basis of the above summary, the granulation process is employed to prepare granular humic-like organic fertilizers, which can be applied to field crops by mechanical side-deep fertilization. Finally, the challenges and perspectives of exolaccase-boosted humification for practical applications are also discussed. This review is a first step toward a more profound understanding of phenolic detoxification, soil improvement, and agricultural production by exolaccase-boosted humification.

•

Exolaccase-initiated humification is conductive to phenolic detoxification

•

Multiple humic-like products are created in exolaccase-boosted humification

•

Similarities and differences between artificial and natural humus are disclosed

•

Humic-like products can be used to sustain soil health and increase crop yield