Efficient removal of PFOA with an In2O3/persulfate system under solar light via the combined process of surface radicals and photogenerated holes

Highly efficient degradation of perfluoroalkyl substances (PFAS) by a novel polytetrafluoroetylene piezocatalyst

Perfluoroalkyl substances (PFAS) are environmentally persistent, bioaccumulative and toxic pollutants. However, thorough degradation of PFAS remains exceptionally difficult due to the high dissociation energy of the C-F bond. Here, we report a viable strategy to markedly degrade PFAS completely by capitalizing on a harmless polytetrafluoroetylene (PTFE) as a piezocatalyst. Remarkably, perfluorooctanoic acid (PFOA), as one of the widely used PFAS, was almost completely removed with a degradation rate of 93.4 % and a defluorination rate of 91.5 % by the ultrasound excitation of PTFE for 1 h. On the basis of the intermediate analysis, we proposed an oxidation mechanism for the piezocatalytic PFOA degradation. Furthermore, this strategy was also efficient for the degradation of perfluoroheptanoic acid (PFNA), perfluorooctane sulfonate (PFOS) and hexafluoropropylene oxide dimer acid (Gen-X), implying its effectiveness to remediate water containing multiple PFAS. Impressively, due to the diverse energy gap between HOMO and LUMO energy of various PFAS, the degradation reaction kinetics of different PFAS are of significant difference. This study provides the deep insight into the piezocatalytic technique for the remediation of persistent and disparate PFAS.

Efficient PFAS Removal Using Reusable and Non-Toxic 3D Printed Porous Trianglamine Hydrogels

Per- and polyfluoroalkyl substances (PFAS) are now a paramount concern in water remediation. Nowadays, urgent action is required for the development of advanced technologies aimed at capturing PFAS and mitigating their impact. To offer a solution, a functional 3D printed hydrogel tailored is designed to trap a broad spectrum of PFAS contaminants. The hydrogel is made of a photo-crosslinked dimethacrylate-ureido-trianglamine (DMU-Δ) and Pluronic P123 dimethacrylate (PDM) fabricated by stereolithography (SLA). With the aid of 3D-printing, porous and nonporous hydrogels (3D-PSHΔ, 3D-SHΔ) as well as quaternized hydrogels (3D-PSHΔQ+) are prepared. These tailored hydrogels, show high uptake capacities and fast removal kinetics for PFAS from aqueous sources. The PFAS removal efficiency of these hydrogels are then compared to P123 hydrogels with no trianglamine (3D-SH). The 3D-SH hydrogel shows no affinity to PFAS, proving that the sorption is due to the interaction between the trianglamine (Δ) and PFAS. Metadynamic simulations also confirmed this interaction. The porous matrices showed the fastest and highest uptake capacity. 3D-PSHΔ is able to capture ≈ 91% of PFAS within 5 h using initial concentrations of 5 and 0.5 ppm in both deionized and river water. The sorption of PFAS is further enhanced by introducing permanent positive charges to the structure of the porous hydrogels, resulting in even faster sorption kinetics for both long and short PFAS chains with diverse polar heads. Besides the remarkable efficiency in capturing PFAS, these designed hydrogels are non-toxic and have outstanding chemical and thermal stability, making them a brilliant candidate for mass use in the combat against PFAS pollution.

Innovative techniques for combating a common enemy forever chemicals: A comprehensive approach to mitigating per- and polyfluoroalkyl substances (PFAS) contamination

The pervasive presence of per and polyfluoroalkyl substances (PFAS), commonly referred to as "forever chemicals," in water systems poses a significant threat to both the environment and public health. PFAS are persistent organic pollutants that are incredibly resistant to degradation and have a tendency to accumulate in the environment, resulting in long-term contamination issues. This comprehensive review delves into the primary impacts of PFAS on both the environment and human health while also delving into advanced techniques aimed at addressing these concerns. The focus is on exploring the efficacy, practicality, and sustainability of these methods. The review outlines several key methods, such as advanced oxidation processes, novel materials adsorption, bioremediation, membrane filtration, and in-situ chemical oxidation, and evaluates their effectiveness in addressing PFAS contamination. By conducting a comparative analysis of these techniques, the study aims to provide a thorough understanding of current PFAS remediation technologies, as well as offer insights into integrated approaches for managing these persistent pollutants effectively. While acknowledging the high efficiency of adsorption and membrane filtration in reducing persistent organic pollutants due to their relatively low cost, versatility, and wide applicability, the review suggests that the integration of these methods could result in an overall enhancement of removal performance. Additionally, the study emphasizes the need for researcher attention in key areas and underscores the necessity of collaboration between researchers, industry, and regulatory authorities to address this complex challenge.

A data-driven analysis to discover research hotspots and trends of technologies for PFAS removal

The frequent detection of persistent per- and polyfluoroalkyl substances (PFAS) in organisms and environment coupled with surging evidence for potential detrimental impacts, have attracted widespread attention throughout the world. In order to reveal research hotspots and trends of technologies for PFAS removal, herein, we performed a data-driven analysis of 3975 papers and 436 patents from Web of Science Core Collection and Derwent Innovation Index databases up to 2023. The results showed that China and the USA led the way in the research of PFAS removal with outstanding contributions to publications. The progression generally transitioned from accidental discovery of decomposition, to experimentation with removal effects and mechanisms of existing methods, and finally to enhanced defluorination and mechanism-driven design approaches. The keywords co-occurrence network and technology classification together revealed the main knowledge framework, which was constructed and correlated through contaminants, substrates, materials, processes and properties. Moreover, adsorption was demonstrated to be the dominant removal process among the current studies. Subsequently, we concluded the principles, advances and drawbacks of enrichment and separation, biological methods, advanced oxidation and reduction processes. Further exploration indicated the hotspots such as alternatives and precursors for PFAS ("genx": 1.258, "f-53b": 0.337), degradable mineralization technologies ("photocatalytic degrad": 0.529, "hydrated electron": 0.374), environment-friendly remediation technologies ("phytoremedi": 0.939, "constructed wetland": 0.462) and combination with novel materials ("metal-organic framework": 1.115, "layered double hydroxid": 0.559) as well as computer science ("molecular dynamics simul": 0.559, "machine learn"). Furthermore, the future direction of technological innovation might lie in high-performance processes that minimize secondary pollution, the development of recyclable and renewable treatment agents, and collaborative control strategies for multiple pollutants. Overall, this study offers comprehensive and objective review for researchers and industry professionals in this field, enabling rapid access to knowledge guidance and insights into research frontiers.

Current state of knowledge of environmental occurrence, toxic effects, and advanced treatment of PFOS and PFOA

Per- and polyfluoroalkyl substances (PFAS) are anthropogenic synthetic compounds, with high chemical and thermal stability and a persistent, stable and bioaccumulative nature that renders them a potential hazard for the environment, its organisms, and humans alike. Perfluorooctane sulfonic acid (PFOS) and Perfluorooctanoic acid (PFOA) are the most well-known substances of this category and even though they are phased out from production they are still highly detectable in several environmental matrices. As a result, they have been spread globally in water sources, soil and biota exerting toxic and detrimental effects. Therefore, up and coming technologies, namely advanced oxidation processes (AOPs) and advanced reduction processes (ARPs) are being tested for their implementation in the degradation of these pollutants. Thus, the present review compiles the current knowledge on the occurrence of PFOS and PFOA in the environment, the various toxic effects they have induced in different organisms as well as the ability of AOPs and ARPs to diminish and/or eliminate them from the environment.

Research Updates on the Mechanism and Influencing Factors of the Photocatalytic Degradation of Perfluorooctanoic Acid (PFOA) in Water Environments

Perfluorooctanoic acid is ubiquitous in water bodies and is detrimental to the health of organisms. Effectively removing perfluorooctanoic acid (PFOA), a persistent organic pollutant, has been a hot topic around the world. With traditional physical, chemical, and biological methods, it is difficult to effectively and completely remove PFOA, the costs are high, and it is easy to cause secondary pollution. There are difficulties in applying some technologies. Therefore, more efficient and green degradation technologies have been sought. Photochemical degradation has been shown to be a low-cost, efficient, and sustainable technique for PFOA removal from water. Photocatalytic degradation technology offers great potential and prospects for the efficient degradation of PFOA. Most studies on PFOA have been conducted under ideal laboratory conditions at concentrations that are higher than those detected in real wastewater. This paper summarizes the research status of the photo-oxidative degradation of PFOA, and it summarizes the mechanism and kinetics of PFOA degradation in different systems, as well as the influence of key factors on the photo-oxidative degradation and defluoridation process, such as system pH, photocatalyst concentration, etc. PFOA photodegradation technology's existing problems and future work directions are also presented. This review provides a useful reference for future research on PFOA pollution control technology.

Degradation of Perfluorooctanoic Acid on Aluminum Oxide Surfaces: New Mechanisms from Ab Initio Molecular Dynamics Simulations

Perfluorooctanoic acid (PFOA) is a part of a large group of anthropogenic, persistent, and bioaccumulative contaminants known as per- and polyfluoroalkyl substances (PFAS) that can be harmful to human health. In this work, we present the first ab initio molecular dynamics (AIMD) study of temperature-dependent degradation dynamics of PFOA on (100) and (110) surfaces of γ-Al₂O₃. Our results show that PFOA degradation does not occur on the pristine (100) surface, even when carried out at high temperatures. However, introducing an oxygen vacancy on the (100) surface facilitates an ultrafast (<100 fs) defluorination of C-F bonds in PFOA. We also examined degradation dynamics on the (110) surface and found that PFOA interacts strongly with Al(III) centers on the surface of γ-Al₂O₃, resulting in a stepwise breaking of C-F, C-C, and C-COO bonds. Most importantly, at the end of the degradation process, strong Al-F bonds are formed on the mineralized γ-Al₂O₃ surface, which prevents further dissociation of fluorine into the surrounding environment. Taken together, our AIMD simulations provide critical reaction mechanisms at a quantum level of detail and highlight the importance of temperature effects, defects, and surface facets for PFOA degradation on reactive surfaces, which have not been systematically explored or analyzed.

Efficient degradation of atrazine through in-situ anchoring NiCo2O4 nanosheets on biochar to activate sulfite under neutral condition

Sulfite (S(IV)) is a promising substitute for sulfate radical-based advanced oxidation processes. Here, a composite of in-situ anchoring NiCo₂O₄ nanosheets on biochar (BC) was firstly employed as a heterogeneous activator for sulfite (NiCo₂O₄@BC-sulfite) to degrade atrazine (ATZ) in the neutral environment. The synergistic coupling of BC and NiCo₂O₄ endows the resulting composite excellent catalytic activity. 82% of the degradation ratio of ATZ (1 mg/L) could be achieved within 10 min at initial concentrations of 0.6 g/L NiCo₂O₄@BC, 3.0 mmol/L sulfite in neutral environment. When further supplementing sulfite into the system at 20 min (considering the depletion of sulfite), outstanding degradation efficiency (∼ 100%) were achieved in the next 10 min without any other energy input by the NiCo₂O₄@BC-sulfite system. The features of the prepared catalysts and the effects of some key parameters on ATZ degradation were systematically examined. A strong inner-sphere complexation (Co²⁺/Ni²⁺-SO₃^2-) was explored between sulfite and the metal sites on the NiCo₂O₄@BC surface. The redox cycle of the surface metal efficiently mediated sulfite activation and triggered the series radical chain reactions. The generated radicals, in particular the surface-bound radicals were involved in ATZ degradation. High performance liquid chromatography-tandem mass spectrometry (LC-MS) technique was used to detect the degradation intermediates. Density functional theory (DFT) calculations were performed to illustrate the possible degradation pathways of ATZ. Finally, an underlying mechanism for ATZ removal was proposed. The present study offered a low-cost and sustainable catalyst for sulfite activation to remove ATZ in an environmentally friendly manner from wastewater.

Effects of trace PFOA on microbial community and metabolisms: Microbial selectivity, regulations and risks

Perfluorooctanoic acid (PFOA), a "forever chemical", is continuously discharged and mitigated in the environment despite its production and use being severely restricted globally. Due to the transformation, attachment, and adsorption of PFOA in aquatic environments, PFOA accumulates in the porous media of sediments, soils, and vadose regions. However, the impact of trace PFOA in the porous media on interstitial water and water safety is not clear. In this work, we simulated a porous media layer using a sand column and explored the effects of µg-level PFOA migration on microbial community alternation, microbial function regulation, and the generation and spread of microbial risks. After 60 days of PFOA stimulation, Proteobacteria became the dominant phylum with an abundance of 91.8%, since it carried 71% of the antibiotic resistance genes (ARGs). Meanwhile, the halogen-related Dechloromonas abundance increased from 0.4% to 10.6%. In addition, PFOA significantly stimulated protein (more than 1288%) and polysaccharides (more than 4417%) production by up-regulating amino acid metabolism (p< 0.001) and membrane transport (p < 0.001) to accelerate the microbial aggregation. More importantly, the rapidly forming biofilm immobilized and blocked PFOA. The more active antioxidant system repaired the damaged cell membrane by significantly up-regulating glycerophospholipid metabolism and peptidoglycan biosynthesis. It is worth noting that PFOA increased the abundance of antibiotic resistance genes (ARGs) and human bacterial pathogens (HBPs) in porous media by 30% and 106%. PFOA increased the proportion of vertical transmission ARGs (vARGs), and co-occurrence network analysis (r ≥ 0.8, p ≤ 0.01) verified that vARGs were mainly mediated by HBPs. A comprehensive understanding of PFOA interactions with its microecological environment is provided.

Photodegradation of per- and polyfluoroalkyl substances in water: A review of fundamentals and applications

Per- and polyfluoroalkyl substances (PFAS) are persistent, mobile, and toxic chemicals that are hazardous to human health and the environment. Several countries, including the United States, plan to set an enforceable maximum contamination level for certain PFAS compounds in drinking water sources. Among the available treatment options, photocatalytic treatment is promising for PFAS degradation and mineralization in the aqueous solution. In this review, recent advances in the abatement of PFAS from water using photo-oxidation and photo-reduction are systematically reviewed. Degradation mechanisms of PFAS by photo-oxidation involving the holes (h_vb⁺) and oxidative radicals and photo-reduction using the electrons (e_cb^-) and hydrated electrons (e_aq^-) are integrated. The recent development of innovative heterogeneous photocatalysts and photolysis systems for enhanced degradation of PFAS is highlighted. Photodegradation mechanisms of alternative compounds, such as hexafluoropropylene oxide dimer acid (GenX) and chlorinated polyfluorinated ether sulfonate (F-53B), are also critically evaluated. This paper concludes by identifying major knowledge gaps and some of the challenges that lie ahead in the scalability and adaptability issues of photocatalysis for natural water treatment. Development made in photocatalysts design and system optimization forges a path toward sustainable treatment of PFAS-contaminated water through photodegradation technologies.

Removal of PFASs from water by carbon-based composite photocatalysis with adsorption and catalytic properties: A review

Per- and polyfluoroalkyl substances (PFASs) are a class of persistent organic pollutants widely distributed in aquatic environments. The adsorption and photocatalytic methods have been widely used to remove PFASs in water because of their respective advantages. Still, they have apparent defects when used alone. Therefore, the adsorption and photocatalytic technologies are combined through suitable preparation methods, and the excellent properties of the two are used to synergize the treatment of organic pollutants. This strategy of "concentrating" pollutants and then degrading them in a centralized manner plays an essential role in removing trace PFASs. Nevertheless, a review focusing on this kind of adsorption photocatalyst system is lacking. This review will fill this gap and provide a reference for developing a carbon-based composite photocatalyst. Firstly, different carbon-based composite photocatalysts are reviewed in detail, focusing on the differences in various composite materials' excellent adsorption and catalytic properties. Secondly, the factors influencing the removal effect of carbon-based composite photocatalysts are discussed. Thirdly, the removal mechanism of carbon-based composite photocatalysts is summarized in detail. The removal process involves two steps: adsorption and photodegradation. The adsorption process involves multiple cooperative adsorption mechanisms, and photocatalytic degradation includes oxidative and reductive degradation. Fourthly, the comparison of adsorption-photocatalysis with common treatment techniques (including removal rate, range of adaptation, cost, and the possibility of expanding application) is summarized. Finally, the prospects of carbon-based composite photocatalysts for repairing PFASs are given by evaluating the performance of different composites.