Di-functional Cu2+-doped BiOCl photocatalyst for degradation of organic pollutant and inhibition of cyanobacterial growth

Small-molecule intercalation induces defective generation of bromine-doped bismuth oxychloride to enhance photocatalytic degradation and detoxification of tetracycline

Photocatalysts are one of the effective methods to degrade antibiotic contamination, but the efficiency is low and the toxicity is not well recognized. Deep lattice doping to induce defect generation is an effective way to improve the performance of photocatalysts. Here, defect-rich bromine-doped BiOCl-XBr photocatalysts were constructed with the help of small molecules inserted into the interlayer. The photocatalytic degradation performance of BiOCl-XBr was significantly enhanced, and its degradation rate was up to about 12 times that of BiOCl monomer. The main reasons for the stronger photocatalytic performance of BiOCl-XBr include Br doping to enhance visible light absorption, surface defects, and Bi valence changes to improve charge transport. The degradation of tetracycline (TC) produced more toxic intermediates, and the biotoxicity experiments also confirmed that the toxicity showed a trend of increasing and then decreasing, indicating that the more toxic intermediates were also mineralized during the degradation process. However, the mortality and hatching rate of zebrafish in the exposed group after degradation recovered but changed their activity pattern under light and dark conditions. This further warns us to focus on the toxicity changes after antibiotic degradation. Finally, based on the free radical analysis, the mechanism of photocatalytic degradation and detoxification of TC by BiOCl-XBr was proposed.

Facile synthesis of Bi3O(OH)(AsO4)2 and simultaneous photocatalytic oxidation and adsorption of Sb(III) from wastewater

Antimony (Sb) decontamination in water is necessary owing to the worsening pollution which seriously threatens human life safety. Designing bismuth-based photocatalysts with hydroxyls have attracted growing interest because of the broad bandgap and enhanced separation efficiency of photogenerated electron/hole pairs. Until now, the available photocatalysis information regarding bismuth-based photocatalysts with hydroxyls has remained scarce and the contemporary report has been largely limited to Bi3O(OH)(PO4)2 (BOHP). Herein, Bi3O(OH)(AsO4)2 (BOHAs), a novel ultraviolet photocatalyst, was fabricated via the co-precipitation method for the first time, and developed to simultaneous photocatalytic oxidation and adsorption of Sb(III). The rate constant of Sb(III) removal by the BOHAs was 32.4, 3.0, and 4.3 times higher than those of BiAsO4, BOHP, and TiO2, respectively, indicating that the introduction of hydroxyls could increase the removal of Sb(III). Additionally, the crucial operational parameters affecting the adsorption performance (catalyst dosage, concentration, pH, and common anions) were investigated. The BOHAs maintained 85% antimony decontamination of the initial yield after five successive cycles of photocatalysis. The Sb(III) removal involved photocatalytic oxidation of adsorbed Sb(III) and subsequent adsorption of the yielded Sb(V). With the acquired knowledge, we successfully applied the photocatalyst for antimony removal from industrial wastewater. In addition, BOHAs could also be powerful photocatalysts in the photodegradation of organic pollutants studies of which are ongoing. It reveals an effective strategy for synthesizing bismuth-based photocatalysts with hydroxyls and enhancing pollutants' decontamination.

Low concentration of peroxymonosulfate coupled with visible light triggers oxygen reactive species generation over constructed Bi25FeO40/BiOCl Z-scheme heterojunction for various tetracycline antibiotics removal

Photocatalytic peroxymonosulfate (PMS) oxidation systems demonstrate significant potential and promising prospects through the interconnection of photocatalytic and PMS oxidation for simultaneously achieving efficient pollutant removal and reduction of PMS dosage, which prevents resource wastage and secondary pollution. In this study, a Z-scheme Bi25FeO40/BiOCl (BOFC) heterojunction was constructed to carry out the photocatalytic PMS oxidation process for tetracyclines (TCs) pollutants at low PMS concentrations (0.08 mM). The photocatalytic PMS oxidation rate of Bi25FeO40/BiOCl composites for tetracycline hydrochloride (TCH), chlortetracycline (CTC), oxytetracycline (OTC) and doxycycline (DXC) reaches 86.6%, 83.6%, 86.7%, and 88.0% within 120 min. Simultaneously, the BOFC/PMS system under visible light (Vis) equally displayed the practical application prospects for the solo and mixed simulated TCs antibiotics wastewater. Based on the electron spin resonance (ESR) and X-ray photoelectron spectroscopy (XPS) valence band spectrum, a Z-scheme electron migration pathway was proposed to elucidate the mechanism underlying the performance enhancement of BOFC composites. Bi25FeO40 in BOFC composites can serve as active site for activating PMS by the formation of Fe3+/Fe2+ cycle. Toxicity estimation software tool (T.E.S.T.) and mung beans planting experiment demonstrates that BOFC/PMS/Vis system can reduce toxicity of TCs wastewater. Therefore, BOFC/PMS/Vis system achieves efficient examination in different water environments and efficient utilization of PMS, which displays a scientific reference for achieving environmentally-friendly and resource-saving handling processes.

Recent advances in visible light driven inactivation of bloom forming blue-green algae using novel nano-composites: Mechanism, efficiency and fabrication approaches

Over the years, algae have proved to be a water pollutant due to global warming, climate change, and the unregulated addition of organic compounds in water bodies from diffused resources. Harmful algal blooms (HABs) are severely affecting the health of humans and aquatic ecosystems. Among available anti-blooming technologies, semiconductor photocatalysis has come forth as an effective alternative. In the recent past, literature has been modified extensively with a decisive knowledge regarding algal invasion, desired preparation of nanomaterials with enhanced visible light absorption capacity and mechanisms for algal cell denaturation. The motivation behind this review article was to gather algal inactivation data in a systematic way based on various research studies, including the construction of nanoparticles and purposely to test their anti-algal activities under visible irradiation. Additionally, this article mentions variety of starting materials employed for preparation of various nano-powders with focus on their synthesis routes, analytical techniques as well as proposed mechanisms for lost cellular integrity in context of reduced chlorophyll' a' level, cell rapture, cell leakage and damages to other physiological constituents; credited to oxidative damage initiated by reactive oxidation species (ROS). Various floating and recyclable composited catalysts Ag2CO3-N: GO, Ag/AgCl@ZIF-8, Ag2CrO4-g-C3N4-TiO2/mEP proved to be game-changers owing to their enhanced VL absorption, adsorption, stability, separation and reusability. An outlook for the generalized limitations of published reports, cost estimations for practical implementation, issues and challenges faced by nano-photocatalysts and possible opportunities for future studies are also proposed. This review will be able to provide vast insights for coherent fabrication of catalysts, breakthroughs in experimental methodologies and help in elaboration of damage mechanisms.

Oxygen Vacancy Defect Enhanced NIR-II Photothermal Performance of BiOxCl Nanosheets for Combined Phototherapy of Cancer Guided by Multimodal Imaging

Narrow photo-absorption range and low carrier utilization are significant barriers that restrict the antitumor efficiency of 2D bismuth oxyhalide (BiOX, X = Cl, Br, I) nanosheets (NSs). Introducing oxygen vacancy (OV) defects can expand the absorption range and improve carrier utilization, which are crucial but also challenging. In this study, a series of BiOxCl NSs with different OV defect concentrations (x = 1, 0.7, 0.5) is developed, which shows full spectrum absorption and strong absorption in the second near-infrared region (NIR-II). Density functional theory calculations are utilized to calculate the crystal structure and density states of BiOxCl, which confirm that part of the carriers is separated by OV enhanced internal electric field to improve carrier utilization. The carriers without redox reaction can be trapped in the OV, leading to great majority of photo-generated carriers promoting the photothermal performance. Triggered by single NIR-II (1064 nm), BiOxCl NSs' bidirectional efficient utilization of carriers achieves synchronously combined phototherapy, leading to enhanced tumor ablation and multimodal diagnostic in vitro and vivo. It is thus believed that this work provides an innovative strategy to design and construct nanoplatforms of indirect band gap semiconductors for clinical phototheranostics.

Highly efficient visible-light driven dye degradation via 0D BiVO4 nanoparticles/2D BiOCl nanosheets p-n heterojunctions

The construction of hybrid heterojunction photocatalysts is an effective strategy to improve the utilization of photogenerated carriers and photocatalytic activity. To enhance the separation distance of photogenerated carriers and accelerate the effective separation at the heterojunction of the interface, a unique 0D-2D hierarchical nanostructured p-n heterojunction was successfully fabricated in this work. BiOCl (BOC) nanosheets (p-type) were in situ grown on BiVO4 (BVO) nanoparticles (n-type) using the microemulsion-calcination method for highly efficient visible-light-driven organic dye degradation. Compared with pure BVO (the degradation rate of rhodamine B (RhB): about 32.0% in 55 min, the mineralization rate: 24.9% in 120 min), the RhB degradation rate can reach about 99.5% in 55 min and the mineralization rate of 62.1% in 120 min by utilizing BVO/25%BOC heterojunction photocatalyst under visible light irradiation. Various characterizations demonstrate that the formation of BVO/BOC p-n heterojunction greatly facilitates photogenerated carriers separation efficiency. Meanwhile, the results of the scavenging experiments and electron spin resonance tests indicate that ·O2- and h+ are the prominent active species for Rh B degradation. In addition, possible degradation pathways for Rh B were proposed using LC-MS tests. This work proves that building low dimensional p-n heterojunction photocatalysts is a promising strategy for developing photocatalysts with high efficiency.

Copper-doped bismuth oxychloride nanosheets assembled into sphere-like morphology for improved photocatalytic inactivation of drug-resistant bacteria

The devastating microbiological contamination as well as emerging drug-resistant bacteria has posed severe threats to the ecosystem and public health, which propels the continuous exploitation of safe yet efficient disinfection products and technology. Here, copper doping engineered bismuth oxychloride (Cu-BiOCl) nanocomposite with a hierarchical spherical structure was successfully prepared. It was found that due to the exposure of abundant active sites for the adsorption of both bacteria cells and molecular oxygen in the structure, the obtained Cu-BiOCl with nanosheets assembled into sphere-like morphology exhibited remarkable photocatalytic antibacterial effects. In particular, compared to the pure BiOCl, composite Cu-BiOCl possessed improved antibacterial effects against Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), and Methicillin-resistant Staphylococcus aureus (MRSA). The combination of physicochemical characterizations and theoretical calculations has revealed that copper doping significantly promoted the light absorbance, inhibited the recombination of electron-hole pairs, and enhanced molecular oxygen adsorption, which resulted in more generation of active species including reactive oxygen species (ROS) and h+ to achieve superior photocatalytic bacterial inactivation. Finally, transcriptome analysis on MRSA pinpointed photocatalytic inactivation induced by Cu-BiOCl may retard largely the development of drug-resistance. Therefore, the built spherical Cu-BiOCl nanocomposite has provided an ecofriendly, economical and robust strategy for the efficient removal of drug-resistant bacteria with promising potentials for environmental and healthcare utilizations.

Elevating the Photocatalytic Performance of BiOCl by Promoting Light Utilization: From Co doping to the Microreactor

Owing to its unique layered structure, BiOCl demonstrates high photocatalytic activity. However, its wide bandgap hinders the absorption of visible light. Doping modification is an effective method to expand the light absorption edge of photocatalysts by creating a doping energy level within the bandgap. Herein, Co as a variable valence element was used to dope the BiOCl nanosheets through a simple hydrothermal approach. As a result, the absorption edge of Co-BiOCl extends to the visible light region, and the photocatalytic performance was enhanced by 3.02 times. To overcome the shortcoming of photons being consumed easily in the bulk reactor, a planar microreactor was introduced to reduce the attenuation of light and accelerate the mass transfer. By comparison to the bulk reactor, a maximum of 15.3-fold additional activity promotion emerged. This work combines doping modification and reactor improvement to realize highly efficient photocatalysis in practical application.

Fabrication of CuFe2O4/Bi12O17Cl2 photocatalyst with intrinsic p-n junction for highly efficient bisphenol A degradation

The construction and application of novel highly efficient photocatalysts have been the focus in the field of environmental pollutant removal. In this work, a novel CuFe2O4/Bi12O17Cl2 photocatalysts were synthesized by simple hydrothermal and chemical precipitation method. The fabricated CuFe2O4/Bi12O17Cl2 composite exhibited much higher photocatalytic activity than pristine CuFe2O4 and Bi12O17Cl2 in the removal of bisphenol A (BPA) under visible-light illumination, which ascribed to the intrinsic p-n junction of CuFe2O4 and Bi12O17Cl2. The photocatalytic degradation rate of BPA on CuFe2O4/Bi12O17Cl2 with an optimized CuFe2O4 content (1.0 wt.%) reached 93.0% within 30 min. The capture experiments of active species confirmed that the hydroxyl radicals (•OH) and superoxide radicals (•O2-) played crucial roles in photocatalytic BPA degradation process. Furthermore, the possible degradation mechanism and pathways of BPA was proposed according to the detected intermediates in photocatalytic reaction process.

Br-Doped BiOCl Nanosheet Exposed (001) Facet: Surface Oxygen Vacancy and Directed Electron Flow Boosting the Photocatalytic Performance

The defective BiOCl nanosheet exposed (001) facet with favorable photocatalytic performance was designed. The surface microstructure analysis and theoretical calculation certified the dominant exposed (001) facet and rich surface oxygen defects of Br--doped BiOCl (B-6) nanosheets. The energy level structure analysis indicates that the band gap can be narrowed and the light absorption range can be widened by introducing Br- to BiOCl, and the presence of defective energy levels increases the photogenerated carrier transfer efficiency. Moreover, the doping of Br- in BiOCl promotes the directional flow of electrons to the surface of B-6, which improves the photocatalytic performance of the sample. Thus, the Br--doped BiOCl can degrade 96.5% RhB within 6 min under visible-light irradiation with high apparent reaction rate constants of 0.51 min-1, exhibiting the strongest photocatalytic degradation performance. This work provides guidance for the preparation of Bi-based photocatalysts with excellent performance.

BiOCl Nanosheets with (001), (002), and (003) Dominant Crystal Faces with Excellent Light-Degradation Ability

Gray bismuth chloride nanosheets with a highly enhanced electric field intensity were prepared by a simple and efficient method. Their energy gap is reduced to 2.35 eV. The prepared nanosheets show high photocatalytic activity for the degradation of rhodamine B under visible light. The resulting samples were characterized by X-ray diffractometry, high-resolution scanning electron microscopy, X-ray photoelectron spectroscopy, infrared spectroscopy, UV-vis diffuse reflectance spectroscopy, specific surface area analysis, electrochemical analysis, electron paramagnetic resonance, and UV-vis spectroscopy. The photocatalytic activity of prepared BiOCl was evaluated by the degradation of RhB. The prepared BiOCl sample (0.5 g/L) could completely degrade RhB (10 mg/L) within 10 min, and its visible photocatalytic activity was 80 times that of the original white BiOCl. Superoxide radicals were the main active substance involved in organic degradation.

Research on the Antibacterial Properties of MXene-Based 2D-2D Composite Materials Membrane

Novel MXene-based two-dimensional (2D) membranes are widely used for water purification due to their highly controllable structure and antibacterial properties. However, in the process of membrane separation, the problems of membrane fouling, especially biological fouling, limits the further application of MXene-based membranes. In this study, in order to improve the antibacterial and separation properties of membranes, three kinds of MXene-based 2D-2D composite membranes (M2~M4) were prepared using polyethersulfone (PES) as the substrate, which were GO@MXene, O-g-C₃N₄@MXene and BiOCl@MXene composite membranes respectively. The results showed that the antibacterial activity of M2~M4 against Escherichia coli and Staphylococcus aureus was further improved, especially the antibacterial ratio of M4 against Escherichia coli and Staphylococcus aureus was up to 50% and 82.4%, respectively. By comparing the surface morphology of MXene membrane and modified membrane treated bacteria through scanning electron microscopy (SEM), it was found that the cell density on modified membrane was significantly lower than that of pure MXene membrane.

Boosting the photocatalytic CO2 reduction reaction over BiOCl nanosheet via Cu modification

The development of photocatalytic reduction of CO₂ is hindered by slow surface reaction kinetics due to the high activation barrier of CO₂ and the lack of activation centers in the photocatalyst. To overcome these limitations, this study focuses on enhancing the photocatalytic performance through incorporating Cu atoms into BiOCl. By introducing a minute amount of Cu (0.18 wt%) into BiOCl nanosheets, significant improvements were achieved, with a CO yield of 38.3 µmol g^-1 from CO₂ reduction, surpassing that of pristine BiOCl by 50%. To explore the surface dynamics of CO₂ adsorption, activation and reactions, in situ DRIFTS was employed. Theoretical calculations were further performed to elucidate the role of Cu in the photocatalytic process. The results demonstrate that the incorporation of Cu into BiOCl induces surface charge redistribution, which facilitates efficient trapping of photogenerated electrons and accelerates the separation of photogenerated charge carriers. Furthermore, Cu modification on BiOCl effectively lowers the activation energy barrier by stabilizing the COOH* intermediate, thereby turning the rate-limiting step from COOH* formation to CO* desorption and boosting the CO₂ reduction process. This work unveils the atomic-level role of modified Cu in enhancing the CO₂ reduction reaction and presents a novel concept for achieving highly efficient photocatalysts.

Preparation and application of Ag plasmon Bi3O4Cl photocatalyst for removal of emerging contaminants under visible light

Photocatalytic degradation has been extensively investigated toward the removal emerging contaminants (ECs) from water. In this study, a series of Ag-Bi₃O₄Cl plasmon photocatalysts were synthesized through the photo-deposition of metallic Ag on the Bi₃O₄Cl surface. The effects of plasmon modification on the catalytic performance of bismuth oxychlorides were analyzed. Ag addition did not alter the morphology of Bi₃O₄Cl. With the increasing Ag content, the number of oxygen defects on the catalyst surface first increased and then decreased. Moreover, the surface plasmon resonance effect of Ag suppressed the recombination of electron-hole pairs, promoting the migration and separation of photocarriers and improving the light absorption efficiency. However, the addition of excessive Ag reduced the number of active sites on the Bi₃O₄Cl surface, hindering the catalytic degradation of pollutants. The optimal Ag-Bi₃O₄Cl photocatalyst (Ag ratio: 0.025; solution pH: 9; dosage: 0.8 g/L) achieved 93.8 and 94.9% removal of ciprofloxacin and tetrabromobisphenol A, respectively. The physicochemical and photoelectric properties of Ag-Bi₃O₄Cl were determined through various characterization techniques. This study demonstrates that introducing metallic Ag alters the electron transfer path of the catalyst, reduces the recombination rate of electron-hole pairs, and effectively improves the catalytic efficiency of Bi₃O₄Cl. Furthermore, the pathways of ciprofloxacin degradation products and their biotoxicity were revealed.

Enhanced photocatalytic reduction of CO2 on BiOBr under synergistic effect of Zn doping and induced oxygen vacancy generation

In this work, different BiOBr powders (without and with Zn doping) were prepared. Their specific properties and photocatalytic performance were studied. Zn doped BiOBr showed higher carrier transportation ability, beneficial to high performance photocatalysis. Further analysis and theoretical calculations unveiled that Zn doping resulted in more dispersive energy band structure with improved oxygen vacancy (O_V) generation due to lattice distortion. O_V acted as trap centers, playing dominant role in carrier transportation enhancement, which also synergized with more dispersive energy band due to Zn doping, improving carrier separation and transfer. Besides, Zn doping would further strengthen trapping effect under O_V existence, stimulating synergistic enhancement to spatial charge separation and transfer with O_V. With synergy of Zn doping and O_V, Zn doped samples produced 1.75 times higher CH₄ generation during gas-solid photocatalytic reduction of CO₂ under visible light, testifying successful conducting of Zn doping improved photocatalytic capacity on BiOBr.

Versatile iodine-doped BiOCl with abundant oxygen vacancies and (110) crystal planes for enhanced pollutant photodegradation

Crystal plane regulation, defect engineering, and element doping can effectively solve the problems of large band gaps, poor light absorption, and fast recombination of BiOCl. In this work, iodine-doped BiOCl (I/BiOCl) nanowafers with abundant (110) crystal planes and oxygen vacancies (OV) were prepared by a simple hydrothermal method and assessed for pollutant photodegradation. I/BiOCl with a molar ratio of I to Cl of 0.6 (I_0.6/BiOCl) degraded under visible light 95.8% of the toxic dye rhodamine B and 85.1% of the persistent antibiotic tetracycline in 5 and 10 min, respectively. In comparison, unmodified BiOCl photodegraded only between 42.0% and 48.2% of these critical water pollutants. Furthermore, I_0.6/BiOCl was highly stable with most of its photocatalytic activity remaining after 4 cycles. Three reasons explain the excellent photodegradation properties of I_0.6/BiOCl. First, the doped photocatalyst grew abundant (110) crystal planes, which inhibits the recombination of photogenerated electron-hole pairs. Second, the large quantity of OV present in I_0.6/BiOCl increased active sites for reactive oxygen species generation, improved photogenerated charge separation, and pollutants adsorption. Lastly, I_0.6/BiOCl had a modified electronic band structure enhancing light absorption. Overall, these results describe a promising photocatalyst capable of degrading efficiently major pollutants with different structures.

A comprehensive review on the photocatalytic inactivation of Microcystis aeruginosa: Performance, development, and mechanisms

Harmful algae blooms (HABs), caused by severe eutrophication and extreme weather, have spread all over the world, posing adverse effects on eco-environment and human health. Microcystis aeruginosa is the dominant harmful cyanobacterial species when HABs occur, and the toxic metabolites produced by it, microcystins, are even fatal to humans. Photocatalytic technology has received wide attention from researchers for its clean and energy-efficient features, while the basic mechanisms and modification methods of photocatalysts have also been widely reported. In recent years, photocatalytic technology has shown great promise in the inhibition of HABs. In this article, we systematically reviewed the progress in photocatalytic performance and algae removal efficiency, discuss the damage mechanisms of photocatalysts for algae removal, including physical damage and various oxidative stresses, and also explore the degradation rates and possible pathways of microcystins. It can be concluded that during the photocatalytic process, the cytoarchitectural integrity of algae cells was damaged, a variety of important protein and enzyme systems were disrupted, and the antioxidant systems collapsed due to the continuous attack of ROS, which adversely affected the normal physiological activities and growth, resulting in the inactivation of algae cells. Moreover, photocatalysts have a degrading effect on microcystins, thus reducing the adverse effects of HAB. Finally, a brief summary of future research priorities regarding the photocatalytic degradation of algae cells is presented. This study helps to enhance the understanding of the destruction mechanism of Microcystis aeruginosa during the photocatalytic process, and provides a reference for the photodegradation of HAB in water bodies.

Efficient Near-Infrared Response Antibacterial Ceramics Based on the Method of Facile In Situ Etching Upconversion Glass-Ceramics

As the world is faced with the coronavirus disease 2019 (COVID-19) pandemic, photocatalytic antibacterial ceramics can reduce the consumption of disinfectants and improve the safety of the public health environment. However, these antibacterial ceramics are often limited by poor stability and low light utilization efficiency. Herein, an antibacterial ceramic was developed via the method of facile in situ etching of upconversion glass-ceramics (UGC) (FIEG) with HCl, in which the BiOCl nanosheets were in situ grown on the surface of GC to improve its stability and antibacterial activity. The results suggest that the upconversion antibacterial ceramics can harvest and utilize near-infrared (NIR) photons efficiently, which display notable antibacterial activity for Escherichia coli (E. coli) under NIR (≥780 nm) and visible light (420-780 nm) irradiation, with a maximum inactivation rate of 7.5 log in 30 min. Meanwhile, in the cycle experiment, more than 6 log inactivation of E. coli was achieved using an antibacterial ceramic sheet after 2-h NIR light irradiation, and the stability of the antibacterial ceramic was discussed. Furthermore, the reactive species, fluorescence-based live/dead cells, and cell structure of bacteria were analyzed to verify the antibacterial mechanism. This study provides a promising strategy for the construction of efficient and stable antibacterial ceramics.

Recent developments on bismuth oxyhalide-based functional nanomaterials for biomedical applications

Multifunctional bismuth oxyhalide (BiOX, X = F, Cl, Br, and I) nanomaterials have great potential advantages in medical diagnostic and therapeutic applications. Pure BiOX nanomaterials have some limitations such as...

Insight into the relationship between redox ability and separation efficiency via the case of α-Bi2O3/Bi5NO3O7

α-Bi2O3/Bi5NO3O7 heterojunctions are constructed, and show higher separation efficiency but lower photocatalytic activity. The reasons are related to the shift of energy band positions.