Design of a high-performance ternary LDHs containing Ni, Co and Mn for arsenate removal

In-situ immobilization of arsenic and antimony containing acid mine drainage through chemically forming layered double hydroxides

Acid mine drainage (AMD) rich in arsenic (As) and antimony (Sb) is considered as a significant environmental challenge internationally. However, simultaneous removal of As and Sb from AMD is still inadequately studied. In this study, a highly effective and simple approach was proposed for mitigating As and Sb-rich AMD, which involves in-situ formation of layered double hydroxides (LDHs). Following the treatment, the residual concentrations of iron (Fe), magnesium (Mg), sulfate, As and Sb in field AMD were decreased from their initial concentrations of 1690, 1524, 2055, 7.8 and 10.6 mg L-1, respectively, to 1.3, 12.4, 623, 0.006 and 0.004 mg L-1, respectively. Chemical formula of the resulting As and Sb-loaded LDHs can be identified as Mg4.226Fe2.024OH2SO4AsSb0.006∙mH2O. The dissolution rates of metal(loid)s in As and Sb-loaded LDH were lower than 1% under strongly acidic and alkaline environments. In presence of the mixed adsorbates, the As immobilization capacity by LDHs was significantly decreased, with an apparent intervention from Sb. However, As did not have a significant effect on the immobilization of Sb by LDH. As was immobilized by LDHs through anion exchange and complexation with -OH groups, while Sb was captured by anion exchange and complexation with [Formula: see text] . Density functional theory (DFT) calculations further proved the above conclusions. This novel approach is effective and can be applied for in-situ AMD treatment from abandoned mines.

Recent Progress of Layered Double Hydroxide-Based Materials in Wastewater Treatment

Layered double hydroxides (LDHs) can be used as catalysts and adsorbents due to their high stability, safety, and reusability. The preparation of modified LDHs mainly includes coprecipitation, hydrothermal, ion exchange, calcination recovery, and sol-gel methods. LDH-based materials have high anion exchange capacity, good thermal stability, and a large specific surface area, which can effectively adsorb and remove heavy metal ions, inorganic anions, organic pollutants, and oil pollutants from wastewater. Additionally, they are heterogeneous catalysts and have excellent catalytic effect in the Fenton system, persulfate-based advanced oxidation processes, and electrocatalytic system. This review ends with a discussion of the challenges and future trends of the application of LDHs in wastewater treatment.

Highly effectual photocatalytic degradation of tartrazine by using Ag nanoparticles decorated on Zn-Cu-Cr layered double hydroxide@ 2D graphitic carbon nitride (C3N5)

Pollution of water resources is one of the main concerns of many countries. This issue originates from the entry of diverse pollutants, including dye compounds, into water sources. In this work, ternary Zn-Cu-Cr layered double hydroxides (LDH) supported on graphitic carbon nitride (g-C₃N₅) decorated by silver nanoparticles (C₃N₅-LDH-Ag) was first prepared. Application of various characterization techniques such as SEM, XRD, and FT-IR revealed that the synthesized nanocomposite was composed of Zn-Cu-Cr LDH nanoparticles, g-C₃N₅ nanosheets, and Ag nanoparticles. The prepared nanomaterials were employed for the photodegradation of tartrazine in aqueous solutions. It was found that the C₃N₅-LDH-Ag catalyst outperformed their pure g-C₃N₅, Zn-Cu-Cr LDH, and C₃N₅-LDH composite in photocatalytic degradation of tartrazine under visible light irradiation. Tartrazine (20 mg/L) can be entirely removed by 0.25 g/L C₃N₅-LDH-Ag photocatalyst under 1 h visible light irradiation (200 W) at pH 6 with a rapid degradation rate constant (k) that is 4.4, 3.9, and 2.6 times higher than that of pure C₃N₅, Zn-Cu-Cr LDH, and C₃N₅-LDH component, respectively. The formation of hydroxyl radicals on the surface of C₃N₅-LDH-Ag as the main active species was approved by the capturing experiment. The finding results approved the stability and reusability of C₃N₅-LDH-Ag in four photocatalytic degradation cycles. In general, our findings revealed that the synthesized nanocomposite could be employed as an efficient photocatalyst in environmental remediation.

NiFe-CN catalysts derived from Solid-phase Exfoliation of NiFe-Layered Double Hydroxide for CO2 Electroreduction

The development of efficient carbon dioxide reducing reaction (CO2RR) catalysts is one of the practical solutions to environmental problems. Usually metal-doped catalysts were used for CO2RR, but the metal elements...