Microfiber fallout during dining and potential human intake

Microplastics suspended in dust from different indoor environments in Barranquilla, Colombia: Predominant microparticles?

Considering that microplastics (MPs) are classified as ubiquitous pollutants, that air quality affects human health, and that people remain indoors most of the time, the need has arisen to evaluate the exposure to MPs within the suspended dust in indoor environments. With this objective, the present study carried out passive sampling to analyze the precipitation of microparticles in some indoor residential environments (2 apartments) and workplaces (an office, a pastry shop, a gift shop, and a paint shop) in Barranquilla, Colombia. The quantification and physical characterization of microparticles were carried out under a stereomicroscope, and the chemical characterization was carried out by infrared microspectroscopy (μFTIR). The highest average concentration of MPs in the apartments was found in the air-conditioned rooms (1.1 × 104 MP/m2/day), and concerning the workplaces, the gift shop and the paint shop were the spaces with a higher proportion of MPs (6.0-6.1 × 103 MP/m2/day), with polyesters being the main synthetic polymers, but being semi-synthetic particles the predominant among the samples. Regarding its morphology, fibers were the most abundant shape (>90%), grouping mainly in the 1000-5000 μm range, while the few fragments found were mostly grouped below 50 μm. Exposure by inhalation of MPs in adults was estimated between 1.7 × 102-1.6 × 103 MP/kg/day, while by ingestion it ranged between 2.7 × 102-2.4 × 103 MPs/kg/day. On the other hand, within our research, a significant presence of non-plastic microparticles was found, which reached up to 69% in analyzed samples, corresponding mainly to cotton and cellulose, so we suggest that these should also be included in future studies that aim to estimate potential health implications from exposure to suspended micropollutants.

Probabilistic Estimation of Airborne Micro- and Nanoplastic Intake in Humans

Little research exists on the magnitude, variability, and uncertainty of human exposure to airborne micro- and nanoplastics (AMNPs), despite their critical role in human exposure to MNPs. We probabilistically estimate the global intake of AMNPs through three main pathways: indoor inhalation, outdoor inhalation, and ingestion during indoor meals, for both children and adults. The median inhalation of AMPs is 1,207.7 (90% CI, 42.5-8.48 × 104) and 1,354.7 (90% CI, 47.4-9.55 × 104) N/capita/day for children and adults, respectively. The annual intake of AMPs is 13.18 mg/capita/a for children and 19.10 mg/capita/a for adults, which is approximately one-fifth and one-third of the mass of a standard stamp, assuming a consistent daily intake of medians. The majority of AMP number intake occurs through inhalation, while the ingestion of deposited AMPs during meals contributes the most in terms of mass. Furthermore, the median ANP intake through outdoor inhalation is 9,638.1 N/day (8.23 × 10-6 μg/d) and 5,410.6 N/day (4.62 × 10-6 μg/d) for children and adults, respectively, compared to 5.30 × 105 N/day (5.79 × 10-4 μg/d) and 6.00 × 105 N/day (6.55 × 10-4 μg/d) via indoor inhalation. Considering the increased toxicity of smaller MNPs, the significant number of ANPs inhaled warrants great attention. Collaborative efforts are imperative to further elucidate and combat the current MPN risks.

The effects of micro- and nanoplastics on the central nervous system: A new threat to humanity?

Given the widespread production and use of plastics, poor biodegradability, and inadequate recycling, micro/nanoplastics (MNPs) have caused widespread environmental pollution. As a result, humans inevitably ingest MNPs through various pathways. However, there is still no consensus on whether exposure to MNPs has adverse effects on humans. This article aims to provide a comprehensive overview of the knowledge of MNPs and the potential mechanisms of their impact on the central nervous system. Numerous in vivo and in vitro studies have shown that exposure to MNPs may pass through the blood-brain barrier (BBB) and lead to neurotoxicity through impairments in oxidative and inflammatory balance, neurotransmitter alternation, nerve conduction-related key enzymes, and impact through the gut-brain axis. It is worth noting that MNPs may act as carriers and have more severe effects on the body when co-exposed with other substances. MNPs of smaller sizes cause more severe harm. Despite the scarcity of reports directly relevant to humans, this review brings together a growing body of evidence showing that exposure to MNPs disturbs neurons and has even been found to alter the memory and behavior of organisms. This effect may lead to further potential negative influence on the central nervous system and contribute to the development of other diseases such as central nervous system inflammation and Parkinson 's-like neurodegenerative disorders. There is a need further to investigate the threat of MNPs to human health.

Leaching of heavy metals from polyester microplastic fibers and the potential risks in simulated real-world scenarios

Heavy metals have been incorporated as additives into synthetic textiles to enhance their functional properties. However, these fibers are susceptible to shedding due to mechanical wear, and the release of heavy metals from microplastic fibers (MFs) remains largely uncharacterized. Therefore, this study sought to quantify the levels of heavy metals in textiles, evaluate their leaching capabilities under various scenarios, and ultimately assess the potential health risks associated with MFs ingestion. First, we determined the metal content in eight commonly used polyester textiles. Subsequently, we estimated the metal leaching capacities of specific MFs sourced from carpets, curtains, sweaters, and scarves in freshwater, human saliva, human lung fluid, and fish gastric fluid at distinct time intervals. The results indicated that carpets contained the highest amount of total metals, with a concentration of 218 ± 8 mg/kg. Ultraviolet weathering, coupled with longer exposure durations, led to surface coarsening of MFs, which may be the primary reason for the enhanced leaching of metals in freshwater. Furthermore, our findings revealed that carbonyl index was unsuitable for characterizing aging because polyester inherently contains carbonyl groups. Instead, the O/C ratio emerged as a more suitable indicator. The leached concentrations and percentages of metals from MFs exhibited the following order in biofluids: Sb>Mn>Cr and Cr>Mn>Pb in biofluids, respectively. Finally, the estimated daily intake of metals was significantly below the tolerable thresholds (0.0014-0.14 mg/kg/d for fish and 0.0036-1.0 mg/kg/d for humans), indicating a negligible risk of heavy metal exposure through MFs for both fish and humans. ENVIRONMENTAL IMPLICATION: In recent years, the ecological risks posed by heavy metal contaminants loaded onto microplastic fibers have become an increasing concern. Therefore, our study sought to characterize the accumulation of heavy metals on plastic fabrics and the potential for these loaded heavy metals to be released when microplastic fibers originating from these fabrics enter freshwater environments and interact with organisms. This vector-like behavior underscores the importance of investigating the ecological hazards associated with microplastic fibers carrying contaminants in both environmental and organismal contexts.

Long-range atmospheric transport of microplastics across the southern hemisphere

Airborne microplastics (MPs) can undergo long range transport to remote regions. Yet there is a large knowledge gap regarding the occurrence and burden of MPs in the marine boundary layer, which hampers comprehensive modelling of their global atmospheric transport. In particular, the transport efficiency of MPs with different sizes and morphologies remains uncertain. Here we show a hemispheric-scale analysis of airborne MPs along a cruise path from the mid-Northern Hemisphere to Antarctica. We present the inaugural measurements of MPs concentrations over the Southern Ocean and interior Antarctica and find that MPs fibers are transported more efficiently than MPs fragments along the transect, with the transport dynamics of MPs generally similar to those of non-plastic particles. Morphology is found to be the dominant factor influencing the hemispheric transport of MPs to remote Antarctic regions. This study underlines the importance of long-range atmospheric transport in MPs cycling dynamics in the environment.

There's something in the air: A review of sources, prevalence and behaviour of microplastics in the atmosphere

Literature regarding microplastics in the atmosphere has advanced in recent years. However, studies have been undertaken in isolation with minimal collaboration and exploration of the relationships between air, deposition and dust. This review collates concentrations (particle count and mass-based), shape, size and polymetric characteristics for microplastics in ambient air (m3), deposition (m2/day), dust (microplastics/g) and snow (microplastics/L) from 124 peer-reviewed articles to provide a holistic overview and analysis of our current knowledge. In summary, ambient air featured concentrations between <1 to >1000 microplastics/m³ (outdoor) and <1 microplastic/m³ to 1583 ± 1181 (mean) microplastics/m³ (indoor), consisting of polyethylene terephthalate, polyethylene, polypropylene. No difference (p > 0.05) was observed between indoor and outdoor concentrations or the minimum size of microplastics (p > 0.5). Maximum microplastic sizes were larger indoors (p < 0.05). Deposition concentrations ranged between 0.5 and 1357 microplastics/m²/day (outdoor) and 475 to 19,600 microplastics/m²/day (indoor), including polyethylene, polystyrene, polypropylene, polyethylene terephthalate. Concentrations varied between indoor and outdoor deposition (p < 0.05), being more abundant indoors, potentially closer to sources/sinks. No difference was observed between the minimum or maximum reported microplastic sizes within indoor and outdoor deposition (p > 0.05). Road dust concentrations varied between 2 ± 2 and 477 microplastics/g (mean), consisting of polyvinyl chloride, polyethylene, polypropylene. Mean outdoor dust concentrations ranged from <1 microplastic/g (remote desert) to between 18 and 225 microplastics/g, comprised of polyethylene terephthalate, polyamide, polypropylene. Snow concentrations varied between 0.1 and 30,000 microplastics/L, containing polyethylene, polyamide, polypropylene. Concentrations within indoor dust varied between 10 and 67,000 microplastics/g, including polyethylene terephthalate, polyethylene, polypropylene. No difference was observed between indoor and outdoor concentrations (microplastics/g) or maximum size (p > 0.05). The minimum size of microplastics were smaller within outdoor dust (p > 0.05). Although comparability is hindered by differing sampling methods, analytical techniques, polymers investigated, spectral libraries and inconsistent terminology, this review provides a synopsis of knowledge to date regarding atmospheric microplastics.

Atmospheric microplastics: exposure, toxicity, and detrimental health effects

Microplastics (MPs) are micro-particulate pollutants present in all environments whose ubiquity leads humans to unavoidable exposure. Due to low density, MPs also accumulate in the atmosphere, where they are easily transported worldwide and come into direct contact with the human body by inhalation or ingestion, causing detrimental health effects. This literature review presents the sources of atmospheric MPs pollution, transport routes, physicochemical characteristics, and environmental interactions. The document also explains the implications for human health and analyzes the risk of exposure based on the potential toxicity and the concentration in the atmosphere. MPs' toxicity lies in their physical characteristics, chemical composition, environmental interactions, and degree of aging. The abundance and concentration of these microparticles are associated with nearby production sources and their displacement in the atmosphere. The above elements are presented in an integrated way to facilitate a better understanding of the associated risk. The investigation results encourage the development of future research that delves into the health implications of exposure to airborne MPs and raises awareness of the risks of current plastic pollution to promote the establishment of relevant mitigation policies and procedures.

Airborne microplastics: Occurrence, sources, fate, risks and mitigation

This paper serves to enhance the current knowledge base of airborne microplastics which is significantly smaller than that of microplastics in marine, freshwater and terrestrial environments. It systematically presents the prevalence, sources, fate, risks and mitigations of airborne microplastics through the review of >140 scientific papers published mainly in the last 10 years. Unlike the extant review, it places an emphasis on the indoor microplastics, the risks of airborne microplastics on animals and plants and their mitigations. The outdoor microplastics are mostly generated by the wear and tear of tires, brake pads, waste incineration and industrial activities. They have been detected in many regions worldwide at concentrations ranging from 0.3 particles/m³ to 154,000 particles/L of air even in the Pyrenees Mountains and the Arctic. As for indoor microplastics, the reported concentrations range from 1 piece/m³ to 9900 pieces/m²/day, and are frequently higher than those of the outdoor microplastics. They come from the wear and tear of walls and ceilings, synthetic textiles and furniture finishings. Airborne microplastics could be suspended and resuspended, entrapped, settle under gravity as well as interact with chemicals, microorganisms and other microplastic particles. In the outdoors, they could also interact with sunlight and be carried by the wind over long distance. Airborne microplastics could adversely affect plants, animals and humans, leading to reduced photosynthetic rate, retarded growth, oxidative stress, inflammatory responses and increased cancer risks in humans. They could be mitigated indirectly through filters attached to air-conditioning system and directly through source reduction, regulation and biodegradable substitutes.

Atmospheric microfibers dominated by natural and regenerated cellulosic fibers: Explanations from the textile engineering perspective

A large number of synthetic fibers found in the environment have aroused public conern about microfiber pollution. However, more studies have found that the number of natural fibers and regenerated cellulose fibers in the environment is much higher than that of synthetic fibers. If humans are exposed to excessive amounts of these two types of fibers for a long time, they may also suffer physiological injury. However, this is often ignored by previous research on microfiber pollution. Recently, some publications attributed the dominating amounts of natural fiber and regenerated cellulosic fibers in the environment to the past yield advantage and low durability compared to synthetic fibers. This correspondence supports that view and further discusses the main reasons for the domination of natural and regenerated cellulosic fibers: their physicochemical properties, material sources, manufacturing processes (staple yarn and filament) and applications. This correspondence aims to arouse attention to the potential impact of natural fibers and regenerated cellulose fibers.

Review of research on migration, distribution, biological effects, and analytical methods of microfibers in the environment

Microplastics have been proven to be one of the critical environmental pollution issues. Moreover, microfibers, the most prominent form of microplastics in the environment, have likewise attracted the attention of various countries. With the increase in global population and industrialization, the production and use of fibers continue to increase yearly. As a result, a large number of microfibers are formed. If fiber products are not used or handled correctly, it will cause direct/indirect severe microfiber environmental pollution. Microfibers will be further broken into smaller fiber fragments when they enter the natural environment. Presently, researchers have conducted extensive research in the identification of microfibers, laying the foundation for further resourcefulness research. This work used bibliometric analysis to review the microfiber contamination researches systematically. First, the primary sources of microfibers and the influencing factors are analyzed. We aim to summarize the influence of the clothing fiber preparation and care processes on microfiber formation. Then, this work elaborated on the migration in/between water, atmosphere, and terrestrial environments. We also discussed the effects of microfiber on ecosystems. Finally, microfibers' current and foreseeable effective treatment, disposal, and resource utilization methods were explained. This paper will provide a structured reference for future microfiber research.

First evidence of microplastics isolated in European citizens' lower airway

Microplastics (MPs) have been detected in all environmental locations, including the atmosphere. However, few studies have investigated the presence of airborne MPs in the human respiratory system. Our research purpose was to investigate these pollutants in the lower human airways of 44 adult European citizens, using bronchoalveolar lavage fluid (BALF) collection as a minimally invasive method, that enables the detection of these pollutants in living patients. We studied the relationship between the patients' life habits and physiological parameters, based on background information and medical and occupational history, and the concentration of MPs isolated from their respiratory systems. Our results indicate that most MPs were in the form of microfibers (MFs) (97.06%), with an average concentration of 9.18 ± 2.45 items/100 mL BALF, and only 5.88% (0.57 ± 0.27 items/100 mL BALF) were particulate MPs, without a significant relationship with environmental, physiological, or clinical factors. The average size was 1.73 ± 0.15 mm, with the longest dimension (9.96 mm) corresponding to a polyacrylic fiber. Taken together, the results demonstrated the occurrence of MPs in the lower human airway, although more studies are necessary to elucidate the negative effects these pollutants could induce in the human respiratory system and its associated diseases.

Micro(nano)plastics in food system: potential health impacts on human intestinal system

Micro(nano)plastics (MNPs) in human food system have been broadly recognized by researchers and have drawn an increasing public attention to their potential health risks, particularly the risk to the intestinal system regarding the long-term exposure to MNPs through food consumption. This study aims to review the environmental properties (formation and composition) of MNPs and MNPs pollution in human food system following the order of food production, food processing and food consumption. The current analytic and identical technologies utilized by researchers are also summarized in this review. In fact, parts of commonly consumed food raw materials, processed food and the way to take in food all become the possible sources for human MNPs ingestion. In addition, the available literatures investigating MNPs-induced intestinal adverse effect are discussed from in vitro models and in vivo mammalian experiments, respectively. Particle translocation, cytotoxicity, damaged gut barrier, intestinal inflammation as well as microbial alteration are mostly reported. Moreover, the practical remediation strategies for MNPs pollution are also illustrated in the last section. This review is expected to provide a research insight for foodborne MNPs and arouse more public awareness of MNPs pollution in food and potential risk for human intestinal health.

An Overview of Chemical Additives on (Micro)Plastic Fibers: Occurrence, Release, and Health Risks

Plastic fibers are ubiquitous in daily life with additives incorporated to improve their performance. Only a few restrictions exist for a paucity of common additives, while most of the additives used in textile industry have not been clearly regulated with threshold limits. The production of synthetic fibers, which can shed fibrous microplastics easily (< 5 mm) through mechanical abrasion and weathering, is increasing annually. These fibrous microplastics have become the main composition of microplastics in the environment. This review focuses on additives on synthetic fibers; we summarized the detection methods of additives, compared concentrations of different additive types (plasticizers, flame retardants, antioxidants, and surfactants) on (micro)plastic fibers, and analyzed their release and exposure pathways to environment and human beings. Our prediction shows that the amounts of predominant additives (phthalates, organophosphate esters, bisphenols, per- and polyfluoroalkyl substances, and nonylphenol ethoxylates) released from clothing microplastic fibers (MFs) are estimated to reach 35, 10, 553, 0.4, and 568 ton/year to water worldwide, respectively; and 119, 35, 1911, 1.4, and 1965 ton/year to air, respectively. Human exposure to MF additives via inhalation is estimated to be up to 4.5–6440 µg/person annually for the above five additives, and via ingestion 0.1–204 µg/person. Notably, the release of additives from face masks is nonnegligible that annual human exposure to phthalates, organophosphate esters, per- and polyfluoroalkyl substances from masks via inhalation is approximately 491–1820 µg/person. This review helps understand the environmental fate and potential risks of released additives from (micro)plastic fibers, with a view to providing a basis for future research and policy designation of textile additives.