Modulating anion defect in La0.6Sr0.4Co0.8Fe0.2O3-δ for enhanced catalytic performance on peroxymonosulfate activation: Importance of hydrated electrons and metal-oxygen covalency

Advanced oxidation processes for water and wastewater treatment - Guidance for systematic future research

Advanced oxidation processes (AOPs) are a growing research field with a large variety of different process variants and materials being tested at laboratory scale. However, despite extensive research in recent years and decades, many variants have not been transitioned to pilot- and full-scale operation. One major concern are the inconsistent experimental approaches applied across different studies that impede identification, comparison, and upscaling of the most promising AOPs. The aim of this tutorial review is to streamline future studies on the development of new solutions and materials for advanced oxidation by providing guidance for comparable and scalable oxidation experiments. We discuss recent developments in catalytic, ozone-based, radiation-driven, and other AOPs, and outline future perspectives and research needs. Since standardized experimental procedures are not available for most AOPs, we propose basic rules and key parameters for lab-scale evaluation of new AOPs including selection of suitable probe compounds and scavengers for the measurement of (major) reactive species. A two-phase approach to assess new AOP concepts is proposed, consisting of (i) basic research and proof-of-concept (technology readiness levels (TRL) 1-3), followed by (ii) process development in the intended water matrix including a cost comparison with an established process, applying comparable and scalable parameters such as UV fluence or ozone consumption (TRL 3-5). Subsequent demonstration of the new process (TRL 6-7) is briefly discussed, too. Finally, we highlight important research tools for a thorough mechanistic process evaluation and risk assessment including screening for transformation products that should be based on chemical logic and combined with complementary tools (mass balance, chemical calculations).

Lattice oxygen activation of MnO2 by CeO2 for the improved degradation of bisphenol A in the peroxymonosulfate-based oxidation

The structure of MnO2 was modified by constructing the composites CeO2/ MnO2 via a facile hydrothermal method. The catalytic performance of optimal composite (Mn-Ce10) in peroxymonosulfate (PMS) activation for the degradation of bisphenol A (BPA) is approximately three times higher than that of MnO2 alone. The average valence of manganese in CeO2/MnO2 is lowered compared to MnO2, which induces the generation of more free radicals, such as OH and SO4•-. In addition, the composite exhibits a higher concentration of oxygen vacancies than MnO2, facilitating bondingwith PMS to produce more singlet oxygen (1O2). Moreover, the incorporation of CeO2 activates the lattice oxygen of MnO2, improving its oxidative ability. Consequently, approximately 48% of BPA decomposition in 10min is attributed to direct oxidation in the Mn-Ce10/PMS system, whereas only 36% occurs in 30min for the MnO2/PMS system. Simulation results confirm weakened Mn-O covalency and elongated Mn-O bonds due to the activation of lattice oxygen in CeO2/MnO2, demonstrating that PMS tends to be adsorbed on the composite rather than on MnO2. This work establishes a relationship between lattice oxygen and the degradation pathway, offering a novel approach for the targeted regulation of catalytic oxidation.

A novel DBD/VUV/PMS process for efficient sulfadiazine degradation in wastewater: Singlet oxygen-dominated nonradical oxidation

In this study, a novel process of dielectric barrier discharge plasma/vacuum ultraviolet/peroxymonosulfate (DBD/VUV/PMS) for the nonradical-dominated degradation of sulfadiazine (SDZ) was investigated. The hybrid system has significant synergistic effects, with 95.5% SDZ and 68.3% TOC removal within 10 min. The activation efficiency of DBD/VUV (69.0%) on PMS via multipath was 2.07 times higher than that of single DBD (33.3%) under alkaline conditions. Electron paramagnetic resonance analyses and trapping experiments showed 1O2 was the primary active substance in the DBD/VUV/PMS process. The predominant role of 1O2 revealed that SDZ removal mainly followed the nonradical reaction pathway, contrary to the previously reported non-thermal plasma (NTP)-based radical-dominated process. Multiple spectroscopy analysis showed the efficient degradation process of SDZ. Unlike the radical attack sites, the SDZ transformation pathway by nonradical 1O2 was probably initiated by an aniline ring site attack based on density functional theory (DFT) calculations and product analyses. The DBD/VUV/PMS process reduced energy consumption by 69% compared to DBD. Finally, the evaluation of ecotoxicity and PMS utilization demonstrated the advantages and application prospects of the DBD/VUV/PMS process. This research developed a new nonradical-dominated pathway for antibiotic degradation by the photo/plasma/persulfate process.

Oxygen vacancies-dominated reactive species generation from peroxymonosulfate activated by MoO3-x for pollutant degradation

Interface oxygen vacancies (OVs) are commonly used to improve the catalytic performance of activators in persulfate-based advanced oxidation processes, but the underlying mechanism was not fully explored. This work reports a facile heat treatment method to regulate OVs in MoO_3-x to elucidate the mechanism of peroxymonosulfate (PMS) activated by OVs to degrade 2,4,4-Trichlorobiphenyl (PCB28). Electron spin resonance, free radical quenching, X-ray photoelectron spectroscopy, and Raman spectroscopy confirmed that both reducing Mo species and OVs of MoO_3-x surface were responsible for PMS activation. Further experiments and Density Function Theory (DFT) calculation suggest that OVs in MoO_3-x induced the formation of superoxide radical (O₂^•-), and then O₂^•- was transformed into singlet oxygen (¹O₂) or mediated PMS activation to generate radicals, which contritbued to 70.2% of PCB28 degradation. The steady-state concentrations of free radical calculated with the kinetics model show that OVs were more favorable to mediate PMS to generate hydroxyl radicals (^•OH) under oxic conditions, while reducing Mo species would like to induce PMS to produce sulfate radicals (SO₄^•-). Overall, this study is dedicated to a new insight into the in-depth mechanism of PMS activation by OVs-rich catalysts and provides a novel strategy for reactive species regulation in PMS based oxidation process.

Ultrasmall nitrogen-doped Cu0·92Co2·08O4 nanocrystal-decorated cerium dioxide nanoparticles for fast and complete degradation of ranitidine via permonosulfate activation

A simple and efficient coagulation method was used for the rapid preparation of nitrogen-doped copper-cobalt oxide (N-Cu_0.92Co_2·08O₄) supported on cerium dioxide (CeO₂), that is, N-Cu_0.92Co_2·08O₄@CeO₂. A low concentration of N-Cu_0.92Co_2·08O₄@CeO₂ (0.15 g L^-1) was shown to rapidly activate permonosulfate (PMS) (0.15 g L^-1) to achieve 100% degradation of ranitidine within 10 min. A 100% degradation of ranitidine enabled by the catalyst was achieved over a wide range of pH (5.5-9.0), which could be completed within 8 min in the presence of anionic H₂PO₄^-. Moreover, the N-Cu_0.92Co_2·08O₄@CeO₂ catalyst enabled more than 90% degradation of various typical antibiotics within 30 min, including tetracycline, sulfaixoxazole, and chloramphenicol, with degradation rates of 100%, 93.51%, and 90.01%, respectively. Even after four catalytic cycles, N-Cu_0.92Co_2·08O₄@CeO₂ could be regenerated to achieve 100% degradation of ranitidine. Electrochemical analysis demonstrated that the combination of N-Cu_0.92Co_2·08O₄@CeO₂ and PMS immediately produced a strong current density, thereby rapidly producing reactive oxygen species (ROS) with high performance for the degradation of the target pollutant. Combined ion quenching and electron paramagnetic resonance analyses indicated that the main ROS was the non-free radical ¹O₂. Finally, a plausible ranitidine degradation pathway was deduced based on liquid chromatography-mass spectrometry (LC-MS) analysis, wherein the toxic substance N-nitrosodimethylamine was not produced during the degradation process. In short, this study provides a new perspective for preparing ternary metal catalysts for advanced oxidation processes with practical application significance.

Mechanisms and degradation pathways of doxycycline hydrochloride by Fe3O4 nanoparticles anchored nitrogen-doped porous carbon microspheres activated peroxymonosulfate

Peroxymonosulfate (PMS) based advanced oxidation processes have gained widespread attention in refractory antibiotics treatment. In this study, Fe₃O₄ nanoparticles anchored nitrogen-doped porous carbon microspheres (Fe₃O₄/NCMS) were synthesized and applied to PMS heterogeneous activation for doxycycline hydrochloride (DOX-H) degradation. Benefitting from synergy effects of porous carbon structure, nitrogen doping, and fine dispersion of Fe₃O₄ nanoparticles, Fe₃O₄/NCMS showed excellent DOX-H degradation efficiency within 20 min via PMS activation. Further reaction mechanisms revealed that the reactive oxygen species including hydroxyl radicals (•OH) and singlet oxygen (¹O₂) played the dominant role for DOX-H degradation. Moreover, Fe(II)/Fe(III) redox cycle also participated in the radical generation, and nitrogen-doped carbonaceous structures served as the highly active centers for non-radical pathways. The possible degradation pathways and intermediate products accompanying DOX-H degradation were also analyzed in detail. This study provides key insights into the further development of heterogeneous metallic oxides-carbon catalysts for antibiotic-containing wastewater treatment.

Interface engineering-induced perovskite/spinel LaCoO3/Co3O4 heterostructured nanocomposites for efficient peroxymonosulfate activation to degrade levofloxacin

Conventional perovskite oxides (ABO₃) tend to suffer from their inactive surfaces and limited active sites that reduce their catalytic activity and stability, while interface engineering is a facile modulating technique to boost the catalyst's inherent activity by constructing heterogeneous interfaces. In this study, perovskite/spinel LaCoO₃/Co₃O₄ nanocomposites with heterogeneous interfaces were synthesized via sol-gel and in-situ gradient etching methods to activate peroxymonosulfate (PMS) for degrading levofloxacin (LEV). LaCoO₃ on the surface was etched into spinel Co₃O₄, and LaCoO₃/Co₃O₄ nanocomposites with two crystal structures of perovskite and spinel were successfully formed. The surface-modified LaCoO₃/Co₃O₄ exhibited superior catalytic performance with a reaction rate constant more than 2 times that of the original LaCoO₃, as well as excellent pH adaptability (3-11) and reusability (more than 6 recyclings) for LEV degradation. Besides, multiple characterization techniques were carried out to find that LaCoO₃/Co₃O₄ possessed a larger specific surface area and richer oxygen vacancies after surface modification, which provided more active sites and accelerated mass transfer rate. The mechanism of reactive oxygen species involved in the reaction system was proposed that LaCoO₃/Co₃O₄ not only reacted with PMS directly to produce SO₄^•- and ^•OH but also its surface hydroxyl group helped to form the [≡Co(Ⅲ)OOSO₃]⁺ reactive complex with PMS to produce O₂^•- and ¹O₂. In addition, electrochemical experiments demonstrated that the surface electronic structure of LaCoO₃/Co₃O₄ was effectively regulated, exhibiting a faster electron transfer rate and facilitating the redox process. By detecting and identifying degradation intermediates, three degradation pathways for LEV were proposed. Our work provided profound insights into the design of efficient and long-lasting catalysts for advanced oxidation processes.

Radical-/non-radical-mediated catalyst activation of peroxymonosulfate for efficient atrazine degradation

Efficient degradation technologies are urgent to be developed to avoid the ecological and healthy hazards brought from atrazine (ATZ). LaCoO_3-δ/peroxymonosulfate (PMS) system was proved to have strong degradation capabilities to contaminants. In this work, we intended to investigate the effect of the synthesis method on LaCoO_3-δ. However, the hydrothermal method yielded a new material (H-Co) with better catalytic performance than LaCoO_3-δ, which showed stable catalytic ability at pH 3.0-9.0 and 5 consecutive cycles. The coexistence of inorganic Cl^-, SO₄^2-, NO₃^-, H₂PO₄^-, HCO₃^- and organic humic acids exerted little influences on the H-Co/PMS system. In addition, the actual livestock and poultry breeding wastewater could be well degraded and mineralized by the H-Co/PMS system. Free radical burst experiments and EPR characterization were performed to verify the synergistic effects of free radicals and non-free radicals during ATZ degradation. Based on SEM, XRD, O₂-TPD, FTIR, XPS, and electrochemistry characterizations, the efficient catalytic ability of H-Co could be attributed to the abundant oxygen vacancies, surface hydroxyl groups, zero-valent cobalt sites and high electronic conductivity. The degradation pathways were proposed based on the detection of degradation intermediates of ATZ by UPLC-MS. Moreover, the toxic of ATZ during the oxidation was evaluated by TEXT and E. coli inhibition assay. This work comprehensively analyzed the catalytic reaction mechanism of the H-Co/PMS system and provided a feasible pathway for the treatment of the actual livestock and poultry breeding wastewater.

Highly Efficient Copper Doping LaFeO3 Perovskite for Bisphenol A Removal by Activating Peroxymonosulfate

A series of copper doping LaFeO3 perovskite (LaCuxFe1−xO3, LCFO, x = 0.1, 0.4, 0.5, 0.6, 0.9) are successfully synthesized by the sol-gel method under mild conditions. In this study, it is applied for the activation of peroxymonosulfate (PMS) for bisphenol A (BPA) removal. More than 92.6% of BPA was degraded within 30 min at 0.7 g/L of LCFO and 10.0 mM of PMS over a wide pH range with limited leaching of copper and iron ions. The physical–chemical properties of the catalysts were demonstrated by using X-ray diffraction (XRD), N2 adsorption–desorption isotherms, scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). Furthermore, the effects of catalyst dosage, PMS concentration, initial pH value, and inorganic anions on the LCFO/PMS system were fully investigated. Quenching experiments were performed to verify the formation of reactive oxidant species, which showed that the radical reaction and mechanisms play a great role in the catalytic degradation of BPA. The perovskite LCFO is considered a stable, easy to synthesize, and efficient catalyst for the activation of PMS for wastewater treatment.