Solar-assisted high-efficient cleanup of viscous crude oil spill using an ink-modified plant fiber sponge

Stereo-complex polylactide composite aerogel for crude oil adsorption

Adsorption materials are a cost-effective and simple method for oil spill remediation, but their efficiency is limited by high crude oil viscosity. Additionally, non-degradable materials pose another risk of secondary pollution, such as microplastic debris. Here, an environmentally-friendly stereo-complex polylactide composite (SCC) aerogel were developed via water-assisted thermally induced phase separation. The SCC with 3 wt% carbon nanotubes had a hierarchical structure of micro/nanoscale pores and high content of stereo-complex crystallites (35.7 %). Along with the excellent water repellency (water contact angle: 157°), SCC aerogel was 2.7 times as resistant to hydrolysis than poly(l-lactide) aerogel (Ph = 13, 37 °C). Additionally, a maximum absorption capacity of 41.2 g g-1 and over 97 % oil/water separation efficiency after 10 cycles were obtained in low viscosity conditions; while in high viscosity conditions, it displayed excellent photothermal performance, reaching a surface temperature of 85 °C under 1 sunlight, reducing crude oil absorption time from 42 min to 60 s (97.6 %-time savings). Moreover, it facilitated continuous crude oil spill recovery under sunlight with an adsorption rate of 3.3 × 104 kg m-3 h-1. The SCC aerogel presents a potential route for utilizing solar energy in crude oil adsorption applications without additional environmental burden.

Recent advances in hydrophobic nanocellulose aerogels for oil spill applications: A review

In a rapidly growing world, petroleum is used extensively in various industries, and the extraction, processing, and transportation of petroleum generates large amounts of petroleum-containing wastewater. Conventional oil/water separation methodologies are often ineffective and costly. Nanocellulose-based aerogels (NA) have emerged as a possible solution to this problem. However, hydrophobic modification is required for effective use in oil/water separation. This review on materials commonly used in these processes and outlines the requirements for adsorbent materials and methods for creating unique lipophilic surfaces. New trends in hydrophobization methods for NA are also discussed. Additionally, it includes the development of composite nanocellulose aerogels (CNAs) and cellulose based membrane specially developed for oil/water (o/w) separation considering different separation requirements. This analysis also examines how CNAs have evolved by introducing special properties that facilitate oil collection or make the adsorbent recyclable. We also discuss the difficulties in creating effective NAs for these important applications in a changing society, as well as the difficulties in creating oil recovery equipment for oil spill cleanup.

Hydrophobic organogel sorbent and its coated porous substrates for efficient oil/water emulsion separation and effective spilled oil remediation

Frequent offshore oil leakage accidents and large quantities of oily-wastewater produced in industry and daily life bring huge challenges to global water purification. The adaptability and stability of organogels as adsorbent materials have shown wide application prospects in the field of oil-water separation. Herein, the organogels displayed stable hydrophobic/lipophilic properties with high absorption ability (1200 wt./wt%), efficient sorption of multiple emulsions (>99.0%), and good reusability. More importantly, the organogels were successfully assembled with 2D/3D substrates to achieve excellent sorption capacity (102.5 g/g) and recycling performance (50 cycles). The gel-carbon black assembled on MS (GCB-MS) sorbent with excellent photothermal conversion performance, and can rapidly heat the surface to 70.4 °C under 1.0 sunlight radiation (1.0 kW/m2) and achieved an ultra-high sorption capacity of about 103 g/g for viscous crude oil. Meanwhile, the GCB-MS was combined with a pump to build continuous oil spill cleaning equipment to achieve a super-fast cleanup rate of 6.83 g/min. The developed hydrophobic organogels had been expanded unprecedentedly to realize the comprehensive treatment of oily-wastewater in complex environments, including layered oils, emulsions, and viscous crude oil spill, which provided an effective path for the comprehensive treatment of oily wastewater in complex environments.

Highly elastic photothermal nanofibrillated cellulose aerogels for solar-assisted efficient cleanup of viscous oil spill

Frequent oil spills and illegal industrial pollutant discharge cause ecological and resource damages, so it is necessary to establish efficient adsorption and recovery strategies for oils in wastewater. Herein, inspired by solar-driven viscosity-breaking, we propose a facile approach to fabricate multifunctional nanofibrillated cellulose-based aerogel with high elasticity, excellent photothermal conversion, efficient selective oil adsorption and antibacterial properties. Firstly, copper sulfide (CuS) nanoparticles were in situ deposited on the template of oxidative nanofibrillated cellulose (ONC), aiming at achieving efficient photothermal effect and antibacterial properties. Ethylene glycol diglycidyl ether (EGDE) was employed to establish multiple crosslinking network between CuS@ONC and polyethyleneimine (PEI). A thin hydrophobic PMTS layer deposited on the surface of aerogel via a facile gas-solid reaction ensured stable oil selectivity. The resulting composite aerogel can rapidly adsorb oil under solar self-heating, significantly reducing the adsorption time from 25 to 5 min. Furthermore, it exhibits excellent adsorption capacities for various oils, retaining over 92 % of its initial capacity even after 20 adsorption-desorption cycles, and the antibacterial properties extend its lifespan. This work offers a promising method for constructing multifunctional aerogels for efficient oil-water separation, especially beneficial for high-viscosity and high-melting-point oil cleanup.

Superhydrophobic polyurethane sponge for efficient water-oil emulsion separation and rapid solar-assisted highly viscous crude oil adsorption and recovery

Rapid and efficient cleaning of oily wastewater and high viscosity crude oil spills is still a global challenge. Conventional three-dimensional porous adsorbents are ineffective for oil-water separation in harsh environment and are restricted to the low fluidity of high viscosity crude oil at room temperature. Increasing temperature can enormously improve the fluidity of viscous crude oil. Herein, the polydimethylsiloxane (PDMS) /carbon black (CB) -modified polyurethane sponge (PU) were prepared by a simple one-step dip-coating method. PDMS/CB@PU (PCPU) exhibits high adsorption capacity to various oils and organic liquid (28.5-68.7 g/g), strong mechanical properties (500 cycles at 50%), outstanding reusability (100 cycles of adsorption and desorption) and excellent environmental stability due to the special PDMS/CB coating. The maximum surface temperature of PCPU sponge can reach 84.7 ℃ under 1 sunlight irradiation. Therefore, the PCPU sponge can rapidly heat and enhance the fluidity of viscous crude oil, significantly speeding up the viscous oil recovery process with the maximum adsorption capacity of 44.7 g/g. In addition, the PCPU sponge can also combine with the vacuum pump to realize the continuous and rapid repair of viscous oil spills from the seawater surface. In consideration of its simple preparation, cost-effectiveness and high oil absorption ability, this solar-assisted self-heating adsorbent provides a new direction for large-scale cleanup and recycling of viscous crude oil spill on the seawater surface.

Ultrathin Cellulose Nanofiber Assisted Ambient-Pressure-Dried, Ultralight, Mechanically Robust, Multifunctional MXene Aerogels

Ambient-pressure-dried (APD) preparation of transition metal carbide/nitrides (MXene) aerogels is highly desirable yet remains highly challenging. Here, ultrathin, high-strength-to-weight-ratio, renewable cellulose nanofibers (CNFs) are efficiently utilized to assist in the APD preparation of ultralight yet robust, highly conductive, large-area MXene-based aerogels via a facile, energy-efficient, eco-friendly, and scalable freezing-exchanging-drying approach. The strong interactions of large-aspect-ratio CNF and MXene as well as the biomimetic nacre-like microstructure induce high mechanical strength and stability to avoid the structure collapse of aerogels in the APD process. Abundant functional groups of CNFs facilitate the chemical crosslinking of MXene-based aerogels, significantly improving the hydrophobicity, water resistance, and even oxidation stability. The ultrathin, 1D nature of the CNF renders the minimal MXenes' interlayered gaps and numerous heterogeneous interfaces, yielding the excellent conductivity and electromagnetic interference (EMI) shielding performance of aerogels. The synergies of the MXene, CNF, and abundant pores efficiently improve the EMI shielding performance, photothermal conversion, and absorption of viscous crude oil. This work shows great promises of the APD, multifunctional MXene-based aerogels in electromagnetic protection or compatibility, thermal therapy, and oil-water separation applications.

Bio-Based Porous Aerogel with Bionic Structure and Hydrophobic Polymer Coating for Efficient Absorption of Oil/Organic Liquids

Increasing contamination risk from oil/organic liquid leakage creates strong demand for the development of absorbents with excellent hydrophobicity and absorption capacity. Herein, bagasse was carbonized to form porous char with a special structure of array-style and vertically perforated channels, and then the activation process enlarged the pore volume of the char. With the cooperation of low-surface-energy polydimethylsiloxane and diatomaceous earth particles, the modified activated carbon aerogel (MACA) was fabricated by modifying the surface coating and mastoid structure on the bagasse char. Moreover, the MACA demonstrates high porosity oil-water separation, hydrophobicity, and considerable absorption capacity (4.06–12.31 g/g) for gasoline and various organic solvents. This work converts agricultural waste into an efficient porous adsorbent, offering a scalable and commercially feasible solution to solving the leakages of oil/organic solvents.