Mn3O4-g-C3N4 composite to activate peroxymonosulfate for organic pollutants degradation: Electron transfer and structure-dependence

Qualitative and quantitative analysis of electrons donated by pollutants in electron transfer-based oxidation system: Electrochemical measurement and theoretical calculations

In order to gain a profound understanding of the fate of pollutants in advanced oxidation processes (AOPs), this study analyzed the electron contribution of pollutants qualitatively and quantitatively which rarely reported before. The rich electron transfer system was constructed by mesoporous carbon nitride (MCN) coupling with persulfate (PS) driven by visible light and the sulfanilamide antibiotics (SULs) were used as target contaminants. Firstly, the qualitative analysis of electron transfer in the system was confirmed systematically. The electron flow direction tested by i-t curves indicated that PS absorbed electrons, while SULs released electrons. The flow rate of electrons was also accelerated after the addition of SULs. The fitting curve between the kinetics and the peak potential difference tested by CV curve showed that the larger potential difference, the slower rate of oxidative degradation. Secondly, the quantification of electron transfer was achieved through theoretical calculations to simulate the interactions of the 'catalyst-oxidant-antibiotic' system. After the addition of SULs, the adsorption energy of the 'catalyst-oxidant-antibiotic' system was enhanced and the bond length of the peroxide bond was stretched. Notably, the electron transfer analysis results showed that the charge of SULs was around 0.032-0.056e, indicating that SULs pollutants played the role of electron contributors in the system. The oxidative degradation pathway included the direct cracking of S-N bond, shedding of marginal groups, ring-opening and hydroxyl addition reaction. This study clarified the electronic contribution of SULs in the oxidation system, providing necessary theoretical supplement for the analysis of the transformation of pollutants in AOPs.

Multiple interface coupling on natural tourmaline enables high-efficiency removal of antibiotic: Superior property and mechanism

Reasonably designing highly active, environmentally friendly, and cost-effective catalysts for efficient elimination of pollutants from water is desirable but challenging. Herein, an efficient heterogeneous photo-Fenton catalyst tourmaline (TM)/tungsten oxide (WO3-x) (named TW10) containing tungsten/boron/iron (W/B/Fe) synergistic active centers and 90% of cheap natural tourmaline (TM) mineral rich in Fe and B elements. The TW10 catalyst can quickly activate peroxymonosulfate (PMS) to generate massive active free radicals, which may induce the rapid and efficient degradation of tetracycline (TC). The TW10/PMS/Visible light system can effectively degrade up to 98.7% of tetracycline (TC) in actual waters (i.e. seawater, Yellow River, and Yangtze River water), and the catalytic degradation rates reach 1.65, 5.569, and 2.38 times higher than those of TM, WO3-x, and commercial P25 (Degussa, Germany), respectively. In addition, the catalyst can be recycled and reused multiple times. Electron spin resonance spectroscopy (EPR), X-ray photoelectron spectroscopy (XPS), and liquid chromatograph-mass spectrometer (LC-MS) analyses confirm that the synergistic catalytic effect of W/B/Fe sites on the TW10 catalyst accelerates the electron transfer between Fe(II) and Fe(III), as well as between W(V) and W(VI), and thus promotes the rapid degradation of TC. The catalytic reaction mechanism and degradation pathway of TC were explored. This work provides a feasible route for the design and development of new eco-friendly and efficient catalyst.

Boosting the Photocatalytic Performance of g-C3N4 through MoS2 Nanotubes with the Cavity Enhancement Effect

The development of catalysts with high photon utilization efficiency is crucial for enhancing the catalytic performance of photocatalysts. Graphitic carbon nitride (g-C3N4) is a prominent material in the field of photocatalysis. However, it still exhibits drawbacks such as low utilization of visible light and severe recombination of photogenerated carriers. To address these issues, this study employs MoS2 nanotubes (NTs) as cocatalysts and constructs MoS2 NTs/g-C3N4. The MoS2 NTs/g-C3N4 exhibits a significant cavity enhancement effect through multiple light reflections. This results in a broad spectral absorption range and high photon utilization efficiency, while also reducing the recombination of photogenerated carriers. The photocatalyst demonstrates outstanding performance in both photocatalytic hydrogen production and photodegradation of organic pollutants. Specifically, the hydrogen production rate is 1921 μmol·g-1·h-1, which is approximately 2.4 times that of g-C3N4. Furthermore, the photodegradation rate of Rhodamine B reaches 98.6% within 30 min, which is approximately three times higher than that of g-C3N4. Free radical capture experiments confirm that holes (h+) are the primary active species in photodegradation. A plausible photocatalytic mechanism for the catalyst is proposed. This study provides valuable insights into the development of heterojunction photocatalysts with high photon utilization efficiency.

Carbon redirection via tunable Fenton-like reactions under nanoconfinement toward sustainable water treatment

The ongoing pattern shift in water treatment from pollution control to energy recovery challenges the energy-intensive chemical oxidation processes that have been developed for over a century. Redirecting the pathways of carbon evolution from molecular fragmentation to polymerization is critical for energy harvesting during chemical oxidation, yet the regulation means remain to be exploited. Herein, by confining the widely-studied oxidation system-Mn3O4 catalytic activation of peroxymonosulfate-inside amorphous carbon nanotubes (ACNTs), we demonstrate that the pathways of contaminant conversion can be readily modulated by spatial nanoconfinement. Reducing the pore size of ACNTs from 120 to 20 nm monotonously improves the pathway selectivity toward oligomers, with the yield one order of magnitude higher under 20-nm nanoconfinement than in bulk. The interactions of Mn3O4 with ACNTs, reactant enrichment, and pH lowering under nanoconfinement are evidenced to collectively account for the enhanced selectivity toward polymerization. This work provides an adaptive paradigm for carbon redirection in a variety of catalytic oxidation processes toward energy harvesting and sustainable water purification.

Three-dimensional porous La(OH)3/g-C3N4 adsorption-photocatalytic synergistic removal of tetracycline

La(OH)3/g-C3N4 composites were successfully synthesized via one-step calcination using urea, melamine, and La(NO3)3·nH2O as raw materials, and applied to UV-induced photocatalytic tetracycline (TC) removal. Comprehensive characterization by an X-ray diffraction (XRD), Fourier transform infrared reflection (FT-IR), high-resolution transmission electron microscope (HRTEM), and other techniques analyzed effects of La3+ doping, especially N vacancies and cyano groups as active sites. Compared to pure g-C3N4 and La(OH)3, synthesized La(OH)3/g-C3N4 composites exhibited a three-dimensional porous nanosheet structure with specific surface area of 83.62 m2/g and equilibrium TC adsorption capacity up to 285.59 mg/g; La(OH)3 doping significantly improved composite structure. After dispersing 10 mg La-CN-0.5 photocatalyst in 60 mL 40 mg/L TC solution, TC removal reached 91.08% in 30 min under UV irradiation, exhibiting excellent performance. Additionally, La-CN-0.5 showed significant adsorption-photocatalytic synergism, with the quasi-primary kinetic constant increased by 1.83-fold. The efficiency of high tetracycline (TC) concentration treatment through adsorption photocatalytic degradation by La-CN-0.5 was confirmed by the utilization of free radical trapping and electron spin resonance (ESR) tests. The significant involvement of ∙O2-, ∙OH, and h+ in this process was observed. These findings propose that the prepared La-CN-0.5 material exhibits a unique capability for adsorption photocatalysis, providing a promising approach for the efficient removal of high TC concentrations.

Z-scheme MnO2/Mn3O4 heterojunctions with efficient peroxymonosulfate activation for organic pollutant removal

The exploration of efficient heterogeneous catalysts for persistent organic pollutant removal is extremely attractive. In the present work, MnO2/Mn3O4 photo-Fenton catalysts were designed by a facile hydrothermal route to activate peroxymonosulfate (PMS) under visible light irradiation for organic pollutant degradation. The optimized MnO2/Mn3O4 heterojunction shows excellent Rhodamine B (RhB) removal efficiency, whose apparent kinetic constant is 11.9 and 5.36 times as high as the MnO2 and Mn3O4. Meanwhile, there is a neglectable attenuation in catalytic performance after 5 recycling runs. Based on the active species trapping experiments, the non-radical process contributes more than the radical process during RhB degradation. Moreover, factors including the dosage of PMS, initial RhB concentration, initial pH, the presence of various anions, different organic pollutants, and water sources are investigated. Systematical characterizations reveal that the enlarged specific surface areas and the efficient charge separation aroused from the Z-scheme mechanism are attributed to the enhanced photo-Fenton performance. The present work contributes to the construction of the Mn-based photo-Fenton catalyst with efficient PMS activation capacity for environmental remediation.

A new multimodal magnetic nanozyme and a reusable peroxymonosulfate oxidation catalyst: Manganese oxide coated-monodisperse-porous and magnetic core-shell microspheres

Monodisperse-porous, polydopamine and manganese oxide coated, core-shell type, magnetic SiO2 (MagSiO2@PDA@MnO2) microspheres 6.4 μm in size were synthesized for the first time, using magnetic, monodisperse-porous SiO2 (MagSiO2) microspheres 6.2 μm in size as the starting material. MagSiO2 microspheres were obtained by a recently developed method namely "staged shape templated hydrolysis and condensation protocol". In the synthesis, MagSiO2 microspheres were consecutively coated by polydopamine (PDA) and then by a MnO2 layer in the aqueous medium. The pore volume and the specific surface area of monodisperse-porous MagSiO2@PDA@MnO2 microspheres were measured as 0.59 cm3 g-1 and 154 m2 g-1, respectively. Their Mn and Fe contents were determined as 66 ± 1 mg g-1 and 165 ± 5 mg g-1 respectively. MagSiO2@PDA@MnO2 microspheres exhibited multimodal enzyme mimetic behavior with highly superior catalase-like, oxidase-like and peroxidase-like activities. The effective production of singlet oxygen (1O2) and superoxide anion (O2-*) radicals in MagSiO2@PDA@MnO2-peroxymonosulfate (PMS) system was demonstrated by ESR spectroscopy. By evaluating this property, MagSiO2@PDA@MnO2 microspheres were tried as a reusable catalyst for dye removal via peroxymonosulfate (PMS) activation in batch experiments for the first time. The degradation runs were made with, rhodamine B (Rh B), methyl orange (MO) and methylene blue (MB) as the pollutant. The core-shell type design allowing the deposition of porous MnO2 layer onto a large surface area provided very fast, instant removals with all dyes, via both physical adsorption and degradation via PMS activation. In the reusability experiments, the removal yields of MO and Rh B decreased 1.8% and 8.9% over five consecutive runs in batch fashion. MagSiO2@PDA@MnO2 microspheres exhibited very good functional and structural stability in consecutive dye degradations. No significant change was observed in Fe content of microspheres while Mn content exhibited a decrease of 7.4% w/w over 5 consecutive degradation runs.

An anode fabricated by Co electrodeposition on ZIF-8/CNTs/CF for peroxymonosulfate (PMS) activation

A Co@ZIF-8/CNTs-CF anode for PMS activation was prepared by Co electrodeposition on carbon felt (CF) modified with ZIF-8 and carbon nanotubes (CNTs). The results showed that the fabricated Co@ZIF-8/CNTs-CF anode was an effective peroxymonosulfate (PMS) activator toward tetracycline (TC) removal. Compared with that in reaction system of bare CF anode + PMS, the reaction system of Co@ZIF-8/CNTs-CF anode + PMS exhibited 3.08 times decrease in the activation energy demanded and 4.21 times increase in the reaction rate constant (k), resulting in a kinetic favorable process of PMS activation by the Co@ZIF-8/CNTs-CF anode. The enhanced activation performance of the fabricated anode was ascribed to the high contents of the pyrrolic N and low valence state of Co in the Co@ZIF-8/CNTs-CF anode. Furthermore, the influence factors on the characteristics of transformation among the generated reactive species during the anodic PMS activation process were comprehensively investigated by the quenching experiments and the electron paramagnetic resonance (EPR) tests. The results showed that the SO₄^•- and reactive oxygen-containing reactive species (O₂^•- and ¹O₂) were generated during the activation of PMS by anode and became the major contributors toward TC removal. The production of ¹O₂ was through the dismutation of O₂^•-. In addition, the EPR experiments demonstrated that O₂^•- was generated mainly through the anodic PMS activation but the electrochemically driven molecular oxygen reduction reaction (ORR) process. The fabricated Co@ZIF-8/CNTs-CF anode for PMS activation provided a reference for the wastewater treatment based on the electrochemical advanced oxidation processes (EAOPs).

Efficient photocatalytic remediation of typical antibiotics in water via Mn3O4 decorated carbon nitride nanotube

Antibiotic abuse will seriously affect the ecology and environment. Photocatalytic oxidation technology based on carbon nitride (g-C₃N₄) has been widely adopted to treat wastewater containing antibiotics. Here, a novel composite photocatalyst MCNT was prepared by loading manganese oxide (Mn₃O₄) on the surface of g-C₃N₄ nanotubes (CNT). Three typical antibiotics, trimethoprim (TMP), norfloxacin (NOR), and tetracycline (TC) were used as model contaminants to evaluate the oxidative properties of prepared materials. Compared with bulk g-C₃N₄, the degradation rates of TMP, NOR, and TC catalyzed by MCNT-5 were increased by 2, 3, and 1.4 times, respectively, mainly due to 1) the larger specific surface area of the nanotube structure of CNT, which provides abundant active sites for antibiotic adsorption and catalytic oxidation, and 2) the loading of Mn₃O₄, which promotes the directional migration of photogenerated charges and improves the separation efficiency of photogenerated electrons and holes. The free radical capture and quenching experiments confirmed that MCNT degraded the target organic pollutants with hydroxyl radical (·OH) and singlet oxygen (¹O₂) as the main active oxidants. This catalyst maintained 80% photocatalytic oxidation performance after five cyclic experiments. This study provides new insights into developing efficient, stable, and environmentally-friendly photocatalysts and provides a new dimension to mitigate the antibiotic pollution problem.

Mn3O4 Catalysts for Advanced Oxidation of Phenolic Contaminants in Aqueous Solutions

Water-soluble organic pollutants, such as phenolic compounds, have been exposed to environments globally. They have a significant impact on groundwater and surface water quality. In this work, different Mn3O4 catalysts were prepared for metal oxide activation of peroxymonosulfate (PMS) to remove the phenolic compound from the water environment. The as-prepared catalysts were characterized using thermogravimetric-differential thermal analysis (TG-DTA), powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET) surface area analysis. Furthermore, the effect of temperature and reusability of the as-prepared Mn3O4 catalysts is also investigated. The Mn3O4 nanoparticles (NPs) catalyst reveals an excellent performance for activating PMS to remove phenol compounds. Mn3O4 NPs exhibits 96.057% efficiency in removing 25 ppm within 60 min. The kinetic analysis shows that Mn3O4 NPs fitted into pseudo-first order kinetic model and exhibited relatively low energy activation of 42.6 kJ/mol. The reusability test of Mn3O4 NPs displays exceptional stability with 84.29% efficiency after three-sequential cycles. The as-prepared Mn3O4 NPs is proven suitable for phenolic remediation in aqueous solutions.