Polythionine-mediated AgNWs-AuNPs aggregation conductive network: Fabrication of molecularly imprinted electrochemiluminescence sensors for selective capture of kanamycin

Mesoporous DNA-Co@C nanofibers knitted aptasensors performing onsite determination of trace kanamycin residues

The abuse of kanamycin (KAN) poses an increasing threat to human health by contaminating agricultural and animal husbandry products, drinking water, and more. Therefore, the sensitive detection of trace KAN residues in real samples is crucial for monitoring agricultural pollution, ensuring food safety, and diagnosing diseases. However, traditional assay techniques for KAN rely on bulky instruments and complicated operations with unsatisfactory detection limits. Herein, we developed a novel label-free aptasensor to achieve ultrasensitive detection of KAN by constructing mesoporous DNA-cobalt@carbon nanofibers (DNA-Co@C-NFs) as the recognizer. Leveraging the extended π-conjugation structure, prominent surface area, and abundant pores, the Co@C-NFs can effectively load aptamer strands via π-π stacking interactions, serving as KAN capturer and reporter. Due to the change in DNA configuration upon binding KAN, this aptasensor presented an ultralow detection limit and ultra-wide linear range, along with favorable precision and selectivity. Using real tap water, milk, and human serum samples, the aptasensor accurately reported trace KAN levels. As a result, this convenient and rapid autosensing technique holds promise for onsite testing of other antibiotic residues in agriculture, food safety, and clinical diagnosis.

A novel Bi2S3 QD-based DPV/ECL synchronous dual-mode molecularly imprinted sensor for enrofloxacin detection in eggs

Herein, a novel electrochemiluminescence (ECL) and differential pulse voltammetry (DPV) dual-mode-based molecularly imprinted (MIP) sensor had been established for the detection of enrofloxacin (ENR) in eggs. Firstly, bismuth sulfide quantum dots (Bi2S3 QDs) as ECL luminophore were synthesized. Furthermore, a MIP film with ionic liquid (ILs), Bi2S3 QDs, and ENR was prepared via the electrochemical polymerization procedure on the electrode. As ENR was identified and captured by the imprinted cavities, the electron transfer pathway was blocked on the electrochemical interface, resulting in the decrease of both DPV signals and ECL signals. As a novel synchronous dual-mode sensing strategy, a pulsed voltage was applied to produce both the DPV signal and ECL signal simultaneously. The ECL and DPV response showed the good linear relationships with the concentration of ENR with the ranges of 0.5 Nm-25 μM and 5 nM-25 μΜ and the detection limits of 0.13 nM and 1.59 nM, respectively.

Molecularly imprinted electrochemiluminescence sensor based on a novel luminol derivative for detection of human serum albumin via click reaction

A novel luminol derivative of N-(1,4-dioxo-1,2,3,4-tetrahydrophthalazin-5-yl)acrylamide (DTA) with excellent luminescence efficiency was designed and synthesized. Furthermore, a molecularly imprinted electrochemiluminescence sensor (MIECLS) was fabricated to detect ultratrace levels of human serum albumin (HSA) with high sensitivity and selectivity via a click reaction. The molecularly imprinted polymers (MIPs) were formed on the electrode surface via electropolymerization with HSA as a template molecule and catechol as a monomer. In the detection process, the -SH group of HSA on the electrode and the C = C bond of acryloyl group in DTA formed a new C-S bond via the Michael addition reaction to construct the MIECLS. The higher the concentration of HSA, the greater electrochemiluminescence (ECL) intensity measured. Taking advantage of MIECLS for ECL detection (scanning potential, - 0.4 to 0.5 V), there was a good linear relationship between ECL intensity and the logarithm of HSA concentration in the range 5 × 10-9 to 1 × 10-13 mg mL-1. The limit of detection (LOD) of the sensor was 1.05 × 10-15 mg mL-1. The sensor exhibited outstanding selectivity and stability. The sensor was applied to detect HSA in human serum with good recoveries of 97.7-105.2%. The concentration of HSA was detected by electrochemical method using the gating effect of MIP.

Monitoring levamisole in food and the environment with high selectivity using an electrochemical chiral sensor comprising an MOF and molecularly imprinted polymer

We used an enhanced recognition strategy to fabricate a novel levamisole-detecting chiral electrochemical sensor featuring a metal-organic framework (MOF) combined with a molecularly imprinted polymer (MIP). We first synthesised a Cu/Zn-[benzene-1,3,5-tricarboxylic acid] (Cu/Zn-BTC) MOF as the molecular immobilisation and signal-amplifying unit, and then prepared the MIP (molecular recognition unit) using levamisole as the template on a glassy carbon electrode modified with Cu/Zn-BTC. We obtained a composite chiral sensor with enhanced recognition capability for levamisole after template removal. Using the templated sites as the switch and K3[Fe(CN)6]/K4[Fe(CN)6] as a probe, we established a new method for detecting levamisole in meat products and water bodies. The linear detection range and detection limit of our chiral sensor are 5 to 6000 × 10-11 mol/L and 1.65 × 10-12 mol/L, respectively. Moreover, the sensor exhibited 93.8-109.0% recovery in the detection of levamisole in chicken and other real samples.

Newly Developed Electrochemiluminescence Based on Bipolar Electrochemistry for Multiplex Biosensing Applications: A Consolidated Review

Recently, there has been an upsurge in the extent to which electrochemiluminescence (ECL) working in synergy with bipolar electrochemistry (BPE) is being applied in simple biosensing devices, especially in a clinical setup. The key objective of this particular write-up is to present a consolidated review of ECL-BPE, providing a three-dimensional perspective incorporating its strengths, weaknesses, limitations, and potential applications as a biosensing technique. The review encapsulates critical insights into the latest and novel developments in the field of ECL-BPE, including innovative electrode designs and newly developed, novel luminophores and co-reactants employed in ECL-BPE systems, along with challenges, such as optimization of the interelectrode distance, electrode miniaturization and electrode surface modification for enhancing sensitivity and selectivity. Moreover, this consolidated review will provide an overview of the latest, novel applications and advances made in this field with a bias toward multiplex biosensing based on the past five years of research. The studies reviewed herein, indicate that the technology is rapidly advancing at an outstanding purse and has an immense potential to revolutionize the general field of biosensing. This perspective aims to stimulate innovative ideas and inspire researchers alike to incorporate some elements of ECL-BPE into their studies, thereby steering this field into previously unexplored domains that may lead to unexpected, interesting discoveries. For instance, the application of ECL-BPE in other challenging and complex sample matrices such as hair for bioanalytical purposes is currently an unexplored area. Of great significance, a substantial fraction of the content in this review article is based on content from research articles published between the years 2018 and 2023.

Enhanced anode electrochemiluminescence in split aptamer sensor for kanamycin trace monitoring

Covalently modifying electrochemiluminescence (ECL) luminophores to alter their energy levels or generate energy/electron transfer processes for improved performance is hindered by the complex design and fabrication processes. In this study, non-covalent bond self-assembly was employed to enhance the ECL property of gold nanoclusters with tryptophan (Try) and mercaptopropionic acid (MPA) as ligands (Try-MPA-gold nanoclusters). Specifically, through the molecular recognition of Try by cucurbit[7]uril, some non-radiative transition channels of the charge carriers on the surface of the Try-MPA-gold nanoclusters were restricted, resulting in a significant enhancement of the ECL intensity of the nanoclusters. Furthermore, rigid macrocyclic molecules acted on the surface of the nanoclusters through self-assembly, forming a passive barrier that improved the physical stability of the nanoclusters in the water-phase and indirectly improved their luminescent stability. As an application, cucurbit[7]uril-treated Try-MPA-gold nanoclusters (cucurbit[7]uril@Try-MPA-gold nanoclusters) were used as signal probes, and Zn-doped SnO₂ nanoflowers (Zn-SnO₂ NFs) with high electron mobility were used as electrode modification material to establish an ECL sensor for kanamycin (KANA) detection, utilizing split aptamers as capture probes. The advanced split aptamer sensor demonstrated excellent sensitivity analysis for KANA in complex food substrates with a recovery rate of 96.2 to 106.0%.

Band-Edge Effect-Induced Electrochemiluminescence Signal Amplification Based on Inverse Opal Photonic Crystals for Ultrasensitive Detection of Carcinoembryonic Antigen

Photonic crystals (PCs) have emerged as a promising electrochemiluminescence (ECL) matrix in the domain of immunoassay. Making maximum use of light manipulation properties of PCs is highly desired for improving the sensitivity. In this work, we proposed a band-edge effect-induced ECL enhancement strategy based on silica inverse opal PCs (SIOPCs). By fine-tuning the lattice constant and carefully calibrating the stopband position, we found that the band edge of the stopband exerted significant influences on the ECL intensity and spectral distribution. The high density of states at the blue edge of the photonic band gap increased the radiative transition probability of ECL emitters and enhanced the photon extraction during propagation, giving rise to ∼20-fold ECL signal amplification accompanied by a redistributed ECL spectrum for the Ru(bpy)₃²⁺-TPrA system. In combination with the intrinsic structural superiority, like large specific surface area and interconnected macropores, the developed SIOPC electrode was successfully applied in constructing a sandwich-type immunosensor. The fabricated immunosensor displayed a very low detection limit of 0.032 pg/mL and a wide linear range of 0.1 pg/mL-150 ng/mL for a carcinoembryonic antigen assay, showing its potential application in disease diagnosis.