A sponge heated by electromagnetic induction and solar energy for quick, efficient, and safe cleanup of high-viscosity crude oil spills

Recent advances in functional micro/nanomaterials for removal of crude oil via thermal effects

Crude oil is one of the most widely used energy and industrial raw materials that is crucial to the world economy, and is used to produce various petroleum products. However, crude oil often spills during extraction, transportation and use, causing negative impacts on the environment. Thus, there is a high demand for products to remediate leaked crude oil. Among them, oleophilic and hydrophobic adsorbents can absorb crude oil through thermal effects and are research hotspots. In this review, we first present an overview of wettability theory, the heating principles of various thermal effects, and the theory of reducing crude oil viscosity by heating. Then we discuss adsorbents based on different heating methods including the photothermal effect, Joule heating effect, alternating magnetic field heating effect, and composite heating effect. Preparation methods and oil adsorption performance of adsorbents are summarized. Finally, the advantages and disadvantages of various heating methods are briefly summarized, as well as the prospects for future research.

A Novel, Controllable, and Efficient Method for Building Highly Hydrophobic Aerogels

Aerogels prepared using freeze-drying methods have the potential to be insulation materials or absorbents in the fields of industry, architecture, agriculture, etc., for their low heat conductivity, high specific area, low density, degradability, and low cost. However, their native, poor water resistance caused by the hydrophilicity of their polymer matrix limits their practical application. In this work, a novel, controllable, and efficient templating method was utilized to construct a highly hydrophobic surface for freeze-drying aerogels. The influence of templates on the macroscopic morphology and hydrophobic properties of materials was investigated in detail. This method provided the economical and rapid preparation of a water-resistant aerogel made from polyvinyl alcohol (PVA) and montmorillonite (MMT), putting forward a new direction for the research and development of new, environmentally friendly materials.

TDA/rGO@WS with Joule heat and photothermal synergistic effect: A promising adsorption material for all-weather recovery of viscous oil spills at sea

Oil spills are a global environmental protection challenge, and traditional adsorption materials have poor effect on low temperature and high viscosity marine oil spills. This article reports composite adsorption materials TDA/rGO@WS for viscous oil spills: loaded with rGO/TDA coating on a commercial biomass wood pulp sponge (WS), achieving Joule heating, photothermal effect and hydrophobic modification. The results showed that the TDA/rGO@WS has good photothermal conversion ability and Joule heating ability, and the temperature increased to 83.7 °C and 148 °C, respectively, under simulated solar irradiation and additional voltage at room temperature. The efficiency of adsorption at a low temperature of 5 °C increased by 22.41% at 1 sun and by 51.53% at 10 V. Temperature effectively reduced the viscosity of the offshore oil spill and ensures the efficient adsorption of oil spills at low temperatures promoted. The TDA/rGO@WS also showed good hydrophobicity (WCA=129°), excellent efficiency of water-oil separation (99.53%) and good adsorption capacity (9.4-13.68 g/g) for marine fuel oils. TDA/rGO@WS effectively solves the problem of cleaning up high-viscosity oil spills from ships in winter and polar waters, and proposes a new strategy for all-weather efficient treatment of oil spills at sea.

Robust mussel-inspired superhydrophobic sponge with eco-friendly photothermal effect for crude oil/seawater separation

Frequent oil spills have significant implications for the preservation of ecological balance. However, conventional superhydrophobic materials are limited to organic solvent separation, lacking the ability to undergo thermal conversion. In response to these challenges, photothermal materials have emerged as a promising, environmentally friendly, and cost-effective solution. These materials utilize solar energy as a constant power source to effectively reduce the viscosity of crude oil without the need for additional energy input. This work presents the self-assembly of titanium nitride/polydopamine (TiN/PDA) nanoparticles using hydrolytic methyltrimethoxysilane (MTMS) on the polyurethane (PU) sponge and subsequently dip-coats this sponge with polydimethylsiloxane (PDMS). The TiN nanoparticles act as a photothermal medium, while the PDA coating exhibits a photothermal synergistic effect on TiN nanoparticles. Additionally, the PDA coating demonstrates strong adhesion on the PU sponge through chemical bonding with MTMS, as confirmed by density functional theory (DFT). Furthermore, the superhydrophobic sponges process exceptional mechanical or chemical stability in harsh environments, thanks to the dual protective mechanisms provided by MTMS and PDMS. Particularly important, the excellent photothermal conversion efficiency of this material results in a maximum temperature of 99.4 °C being achieved within 3 min and a stable heating performance of over 99.0 °C across 10 cycles under a standard sunlight intensity. These superhydrophobic sponges can be effectively utilized for continuous vacuum-assisted separation of crude oil/seawater, enabling rapid adsorption and purification in oceanic environments.

"Rigid-Flexible" Anisotropic Biomass-Derived Aerogels with Superior Mechanical Properties for Oil Recovery and Thermal Insulation

Aerogels with low density, high mechanical strength, and excellent elasticity have a wide potential for applications in wastewater treatment, thermal management, and sensors. However, the fabrication of such aerogels from biomass materials required complex preparation processes. Herein, a sustainable and facile strategy was reported to construct lignin/cellulose aerogels (LCMA) with three-dimensional interconnected structures by introducing homologous lignin with a polyphenyl propane structure as a structural enhancer through a top-down directional freezing approach, prompting a 2036% enhancement in compressive modulus and an 8-12-fold increase in oil absorption capacity. In addition, the hydrophobic aerogels with superelasticity were achieved by combining the aligned polygon-like structure and flexible silane chains, which exhibited remarkable compressional fatigue resistance and superhydrophobicity (WCA = 168°). Attributed to its unique pore design and surface morphology control, the prepared aerogel exhibited excellent performance in immiscible oil-water separation and water-in-oil emulsion separation. Due to the ultra-low density (8.3 mg·cm-3) as well as high porosity (98.87%), the obtained aerogel showed a low thermal conductivity (0.02565 ± 0.0024 W·m-1·K-1), demonstrating a potential in insulation applications. The synthetic strategy and sustainability concept presented in this work could provide guidance for the preparation of advanced biomass-based aerogels with unique properties for a wide range of applications.

C,N co-doped TiO2 hollow nanofibers coated stainless steel meshes for oil/water separation and visible light-driven degradation of pollutants

Complex pollutants are discharging and accumulating in rivers and oceans, requiring a coupled strategy to resolve pollutants efficiently. A novel method is proposed to treat multiple pollutants with C,N co-doped TiO₂ hollow nanofibers coated stainless steel meshes which can realize efficient oil/water separation and visible light-drove dyes photodegradation. The poly(divinylbenzene-co-vinylbenzene chloride), P(DVB-co-VBC), nanofibers are generated by precipitate cationic polymerization on the mesh framework, following with quaternization by triethylamine for N doping. Then, TiO₂ is coated on the polymeric nanofibers via in-situ sol-gel process of tetrabutyl titanate. The functional mesh coated with C,N co-doped TiO₂ hollow nanofibers is obtained after calcination under nitrogen atmosphere. The resultant mesh demonstrates superhydrophilic/underwater superoleophobic property which is promising in oil/water separation. More importantly, the C,N co-doped TiO₂ hollow nanofibers endow the mesh with high photodegradation ability to dyes under visible light. This work draws an affordable but high-performance multifunctional mesh for potential applications in wastewater treatment.

Application of graphene aerogels in oil spill recovery: A review

Oil spills have long been a serious threat to marine environment. Physical recovery is the safest and most efficient method in the emergency disposal of offshore oil spill. Graphene aerogel (GA) has a wide application prospect in offshore oil spill emergency recovery and disposal given its unique structural characteristics. In this article, the preparation methods of GA adsorbent are summarized. On this basis, in the background of the application of offshore oil spill recovery, the related properties and targeted modification schemes of GA, such as adsorption, mechanical, and magnetic properties, as well as photothermal conversion properties for disposal of oil spills with high viscosity, are discussed. The Joule heating/photothermal conversion scheme can improve the recovery efficiency of offshore high viscosity oil spills, and adding metal composite materials can increase the magnetic performance and surface roughness of GA and facilitate positioning and recovery after offshore oil spills disposal. The challenges and prospects of modification research are also highlighted, and guidance for further optimizing the performance of GA in offshore oil spill recovery is provided.