Insight into the mechanism of deep NO photo-oxidation by bismuth tantalate with oxygen vacancies

One-step in-situ construction engineering of ZnO-Zn2SnO4 heterojunction for deeply photocatalytic oxidation of nitric oxide

The generation of hazardous intermediates during the process of photocatalytic nitric oxide (NO) oxidation presents a tough issue. Herein, a one-step microwave strategy was employed to introduce oxygen vacancies (OVs) into zinc oxide-zinc stannate (ZnO-Zn2SnO4) heterojunction, resulting in an improvement in the photocatalytic efficiency for NO removal. The construction ZnO-Zn2SnO4 heterojunction with the OVs (ZSO-3) owns a significant contribution towards highly efficient electron transfer efficiency (99.7%), which renders ZSO-3 to exert a deep oxidation of NO-to-nitrate (NO3-) rather than NO-to-nitrite (NO2-) or NO-to-nitrogen dioxide (NO2). Based on the solid supports of experimental and simulated calculations, it can be found that OVs play an irreplaceable role in activating small molecules such as NO and O2. Moreover, the enhanced adsorption capacity of small molecules, which guarantees the high yield of active radical due to the formation of S-scheme heterojunction. This work illuminates a novel viewpoint on one-step in-situ route to prepare Zn2SnO4-based heterojunction photocatalyst with deep oxidation ability of NO-to-NO3-.

Water-Resistance-Based S-Scheme Heterojunction for Deep Mineralization of Toluene

Deep mineralization of low concentration toluene (C7 H8 ) is one of the most significant but challenging reactions in photocatalysis. It is generally assumed that hydroxyl radicals (⋅OH) as the main reactive species contribute to the enhanced photoactivity, however, it remains ambiguous at this stage. Herein, a S-scheme ZnSn(OH)6 -based heterojunction with AlOOH as water resistant surface layer is in situ designed for tuning the free radical species and achieving deep mineralization of C7 H8 . By employing a combination of in situ DRIFTS and materials characterization techniques, we discover that the dominant intermediates such as benzaldehyde and benzoic acid instead of toxic phenols are formed under the action of holes (h+ ) and superoxide radicals (⋅O2 - ). These dominant intermediates turn out to greatly decrease the ring-opening reaction barrier. This study offers new possibilities for rationally tailoring the active species and thus directionally producing dominant intermediates via designing water resistant surface layer.

A More Efficient Method for Preparing a MIP-CQDs/ZnO1-x Photodegradant with Highly Selective Adsorption and Photocatalytic Properties

The application of semiconductor photocatalysts in wastewater treatment always has a drawback, which is the lack of selectivity for pollutants, but molecular imprinting technology (MIT) is a remarkable method for preparing highly selective adsorbents for low concentration target pollutants. Up to now, the research of molecular imprinting materials has mainly focused on organic polymers, and there has been little research on inorganic molecular imprinting materials. In the present work, we introduced carbon quantum dots (CQDs) into the flower-like hierarchical ZnO to prepare photocatalysts CQDs/ZnO. Further, with ciprofloxacin (CIP) as the template molecule, a molecular imprinting material MIP-CQDs/ZnO1-x was prepared by introducing both oxygen vacancies and imprinted cavities into CQDs/ZnO by the hydrothermal calcination method. It can not only increase the concentration of oxygen vacancies and broaden the light absorption range of zinc oxide without changing the crystal form of ZnO but also make it have the characteristics of preferential adsorption and degradation of CIP during the degradation process. Under the synergistic effect of CQDs, oxygen vacancies, and molecularly imprinted cavities, the molecularly imprinted material exhibits excellent photocatalytic and selective adsorption performance.

Jointly augmented photocatalytic NO removal by S-scheme Bi12SiO20/Ag2MoO4 heterojunctions with surface oxygen vacancies

The deep oxidation of NO molecules to NO₃^- species with the avoidance of toxic NO₂ generation is a big and challengeable concern, which can be solved by the rational design and construction of catalytic systems with satisfactory structural and optical features. For such, in this investigation binary composites Bi₁₂SiO₂₀/Ag₂MoO₄ (BSO-XAM) were fabricated through a facile mechanical ball-milling route. From microstructural and morphological analyses, heterojunction structures with surface oxygen vacancies (OVs) were simultaneously created, contributing to the enhanced visible-light absorption, reinforced migration and separation of charge carries, and further boosted generation of reactive species such as superoxide radicals and singlet oxygen. Based on the density-functional theory (DFT) calculations, surface OVs induced the strengthened adsorption and activation of O₂, H₂O, and NO molecules and oxidation of NO to NO₂, while heterojunction structures were beneficial for the continuous oxidation of NO₂ to NO₃^- species. Thus, the heterojunction structures with surface OVs synergistically guaranteed the augmented photocatalytic NO removal and constrained NO₂ generation of BSO-XAM through a typical S-scheme model. This study may provide scientific guidances for the photocatalytic control and removal of NO at ppb level by Bi₁₂SiO₂₀-based composites through the mechanical ball-milling protocol.

Surface Modification of TiO2 by Hyper-Cross-Linked Polymers for Efficient Visible-Light-Driven Photocatalytic NO Oxidation

Solar-driven photocatalysis offers an environmentally friendly and sustainable approach for the removal of air pollutants such as nitric oxides without chemical addition. However, the low specific surface area and adsorption capacity of common photocatalysts restrict the surface reactions with NO at the ppb-level. In this study, imidazolium-based hyper-cross-linked polymer (IHP) was introduced to modify the surface of TiO₂ to construct a porous TiO₂/IHP composite photocatalyst. The as-prepared composite with hierarchical porous structure achieves a larger specific surface area as 309 m²/g than that of TiO₂ (119 m²/g). Meanwhile, the wide light absorption range of the polymer has brought about the strong visible-light absorption of the TiO₂/IHP composite. In consequence, the composite photocatalyst exhibits excellent performance toward NO oxidation at a low concentration of 600 ppb under visible-light irradiation, reaching a removal efficiency of 51.7%, while the generation of the toxic NO₂ intermediate was suppressed to less than 1 ppb. The enhanced NO adsorption and the suppressed NO₂ generation on the TiO₂/IHP surface were confirmed by in situ monitoring technology. This work demonstrates that the construction of a porous structure is an effective approach for efficient NO adsorption and photocatalytic oxidation.

Construction of a TiO2/BiOCl heterojunction for enhanced solar photocatalytic oxidation of nitric oxide

TiO₂/BiOCl heterojunction photocatalysts with different molar ratios (Ti : Bi) were synthesized by a simple solvothermal method. Various spectroscopic techniques including X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), nitrogen adsorption-desorption, X-ray photoelectron spectroscopy (XPS), photoluminescence (PL) and UV-Vis diffuse reflectance spectroscopy (UV-vis DRS) were used to characterize the prepared photocatalysts. The photocatalytic activity of the catalysts was investigated by removing low concentrations of nitrogen oxides. The characterization results show that the TiO₂/BiOCl composite photocatalyst exhibits superior visible light response performance than pure BiOCl and TiO₂. The optimized TiO₂/BiOCl heterojunction with a Ti : Bi molar ratio of 4 : 1 has the best photocatalytic performance. The removal rate of nitrogen oxides of the composite photocatalyst can reach 75%, which is 2.34 times higher than that of pure BiOCl. The observed photocatalytic degradation activity of nitrogen oxides outperforms current state-of-the-art functional photocatalysts. The TiO₂/BiOCl composite photocatalyst has a larger specific surface area, stronger visible light absorption and higher charge separation efficiency compared to other control samples, which contribute to the enhanced photocatalytic activity. The experimental results indicate that the combination of TiO₂ with BiOCl is a promising technique to design visible light-responsive photocatalysts.