A novel g-C3N4/g-C3N4-x homojunction with efficient interfacial charge transfer for photocatalytic degradation of atrazine and tetracycline

Mechanistic insights of PO43- functionalized carbon nitride homojunction hydrogels in photocatalytic-self-Fenton-peroxymonosulfate system for tetracycline degradation

In this study, metal-free PO43- enriched g-C3N4/g-C3N4 (PGCN) homojunction alginate 3D beads were developed for in-situ H2O2 production under visible light. Later, the photocatalytic-self-Fenton system was integrated with peroxymonosulfate for tetracycline degradation. Initially, the PO43- enriched g-C3N4 (PCN) and a homojunction composed of PCN and g-C3N4 (GCN) were prepared via the wet-impregnation method. Later, PGCN homojunction was formulated into 3D alginate beads through the blend-crosslinking method. The comprehensive characterization of the homojunction beads affirmed the closer contact between the semiconductors, alteration of the bandgap, faster channelization of electron-hole pairs, and improved separation of charge carriers that attributed to higher catalytic efficacy. The PGCN beads exhibited a maximum H2O2 production of 535 ± 12 µM under visible light irradiation for 60 min. The homojunction hydrogels displayed 99 ± 0.25 % tetracycline degradation in 20 min in the photocatalytic-self-Fenton-PMS system. The experimental studies also claimed a maximum chemical oxygen demand removal of 81 ± 3.6 % in 20 min with maximum reusability of beads up to 20 cycles. The Z-scheme electron migration mechanism is proposed based on the results aided by scavenger and electron spin resonance analysis. Overall, the as-synthesized alginate-supported homojunction-based photocatalytic-self-Fenton-peroxymonosulfate system is highly versatile and reusable for energy and environmental remediation.

S-scheme homojunction of 0D cubic/2D hexagonal ZnIn2S4 for efficient photocatalytic reduction of nitroarenes

The targeted conversion of toxic nitroarenes to corresponding aminoarenes presents significant promise in simultaneously addressing environmental pollution concerns and producing value-added fine chemicals. In this study, we synthesize a 0D/2D ZnIn2S4 homojunction (CH-ZnIn2S4) by in situ growth of cubic ZnIn2S4 (C-ZnIn2S4) quantum dots onto the surface of ultrathin hexagonal ZnIn2S4 (H-ZnIn2S4) nanosheets for photocatalytic reduction of nitroarenes to aminoarenes using water as a hydrogen donor. The optimal performance of photocatalytic nitro reduction over the 0D/2D CH-ZnIn2S4 homojunction reaches 96.1% within 20 min of visible light irradiation, which is 2.45 and 1.52 times than that of C-ZnIn2S4 (39.3%) and H-ZnIn2S4 (63.3%), respectively. The improved photocatalytic performance can be attributed to the formation of a step-type S-scheme homojunction, characterized by identity chemical composition and natural lattice matching. The configuration enables continuous band bending and a low energy barrier of charge transportation, benefiting the charge transfer across the interface while maximizing their redox capabilities. Furthermore, the 2D structure of H-ZnIn2S4 nanosheets offers abundant surface sites to immobilize the 0D C-ZnIn2S4 that provides ample exposed active sites with low overpotential for HER, thereby ensuring high hydrogenation reduction activity of nitroarenes. The study is expected to inspire further interest in the reasonable design of homojunction structures for efficient and sustainable photocatalytic redox reactions.

Developing In2S3 upon modified MgTiO3 anchored on nitrogen-doped CNT for sustainable sensing and removal of toxic insecticide clothianidin

Herein, the study introduces a novel bifunctional In2S3/MgTiO3/TiO2@N-CNT (IMTNC) nanocomposite, which is poised to revolutionize the detection and removal of clothianidin (CLD) from aquatic environments by synergistic adsorption and photodegradation. Confirmation of the material's synthesis was done using structural, optical, morphological, and chemical characterizations. An outstanding sensitivity of 2.168 μA/nM.cm2 with a linear range of 4-100 nM and a LOD of 0.04 nM, along with an exceptional elimination efficiency of 98.06 ± 0.84% for about 10 ppm CLD within 18 min was demonstrated by the IMTNC nanocomposite. Extensive studies were carried out to appraise the material's effectiveness in the presence of various interfering species, such as cations, anions, organic compounds, and different water matrices, and a comprehensive assessment of its stability throughout several cycles was made. Response Surface Methodology (RSM) study was used to determine the ideal removal conditions for improved performance. In addition, the catalytic performance in removing various other pollutants was also analyzed. Adding In2S3 and developing N-doped Carbon Nanotubes (N-CNT) increased conductivity and higher electrochemical sensing skills, improving charge transfer and increasing photocatalytic activity. This research underscores the potential of the IMTNC nanocomposite as a promising candidate for advanced environmental sensing and remediation applications.

Phosphorylated g-C3N4/sulfur self-doped g-C3N4 homojunction carboxymethyl cellulose beads: An efficient photocatalyst for H2O2 production

The development of highly reusable, affordable, and durable photocatalysts for the production of hydrogen peroxide (H2O2) remained a challenge. In this study, a homojunction photocatalyst (SPGCN) is constructed between phosphorylated g-C3N4 (PCN) and sulfur self-doped g-C3N4 (SCN) using a simple wet impregnation method. Later, the obtained SPGCN homojunction is transformed into hydrogel beads using carboxymethyl cellulose via an effective cross-linking strategy (SPGCN/CMC). The photocatalytic beads displayed a phenomenal H2O2 production of 3.5 mM under visible light illumination for 60 min. The SPGCN/CMC hydrogel beads showed a maximum reusability of 10 cycles with a decline of 1.5 mM H2O2 production. The improved photocatalytic efficiency is indicated by strengthened utilization of visible light via tuning of the band gap, suppressed recombination of electron-hole pairs, and higher separation efficiency through the effective construction of Z-scheme between the phosphorylated carbon nitride and the sulfur-self-doped carbon nitride present in the SPGCN/CMC beads. The mechanistic studies affirmed the dominant role of superoxide radicals in H2O2 production. The photocatalytic H2O2 production followed a highly selective two-electron reduction reaction. Overall, this study highlights the efficient engineering of carbon nitride-based materials towards artificial photosynthesis.

Fabrication of lignosulfonate-derived porous carbon via pH-tunable self-assembly strategy for efficient atrazine removal

Herein, a straightforward protocol was developed for the one-pot synthesis of N-doped lignosulfonate-derived carbons (NLDCs) with a tunable porous structure using natural amino acids-templated self-assembly strategy. Specifically, histidine was employed as a template reagent, leading to the preparation of 10-NLDC-21 with remarkable characteristics, including the large specific surface area (SBET = 1844.5 m2/g), pore volume (Vmes = 1.22 cm3/g) and efficient adsorption for atrazine (ATZ) removal. The adsorption behavior of ATZ by NLDCs followed the Langmuir and pseudo-second-order models, suggesting a monolayer chemisorption nature of ATZ adsorption with the maximum adsorption capacity reached up to 265.77 mg/g. Furthermore, NLDCs exhibited excellent environmental adaptability and recycling performance. The robust affinity could be attributed to multi-interactions including pore filling, electrostatic attraction, hydrogen bonding and π-π stacking between the adsorbents and ATZ molecules. This approach offers a practical method for exploring innovative bio-carbon materials for sewage treatment.

Composite RGO/Ag/Nanosponge Materials for the Photodegradation of Emerging Pollutants from Wastewaters

Some composite materials have been prepared, constituted by a cyclodextrin-bis-urethane-based nanosponge matrix in which a reduced graphene oxide/silver nanoparticles photocatalyst has been dispersed. Different chain extenders were employed for designing the nanosponge supports, in such a way as to decorate their hyper-cross-linked structure with diverse functionalities. Moreover, two different strategies were explored to accomplish the silver loading. The obtained systems were successfully tested as catalysts for the photodegradation of emerging pollutants such as model dyes and drugs. Enhancement of the photoactive species performance (up to nine times), due to the synergistic local concentration effect exerted by the nanosponge, could be assessed. Overall, the best performances were shown by polyamine-decorated materials, which were able to promote the degradation of some particularly resistant drugs. Some methodological issues pertaining to data collection are also addressed.

Metal-organic-framework-confined quantum dots enhance photocurrent signals: A molecularly imprinted photoelectrochemical cathodic sensor for rapid and sensitive tetracycline detection

BACKGROUND

Tetracycline (TC), a cost-effective broad-spectrum antibacterial drug, has been excessively utilized in the livestock and poultry industry, leading to a serious overabundance of TC in livestock wastewater. However, conventional analytical methods such as liquid chromatography and gas chromatography face challenges in achieving sensitive detection of trace amounts of TC in complex substrates. Therefore, it is imperative to develop a highly sensitive and anti-interference analytical method for the detection of tetracycline in livestock wastewater.

RESULTS

A porphyrin-based MOF (PCN-224)-confined carbon dots (CDs) material (CDs@PCN-224) was synthesized by a "bottle-around-ship" strategy. The reduced carrier migration distance is conducive to the separation of electron-hole pairs and enhanced the photocurrent signal due to the tight coupling of CDs and PCN-224. Further, molecularly imprinted polymer (MIP) was synthesized by rapid in-situ UV-polymerization and employed as a recognition element. The specific recognition of the target by imprinted cavities blocks electron transfer, resulting in a "turn off" response signal, thus realizing the selective detection of TC. Under optimal conditions, the constructed MIP-PEC cathodic sensor detected 1.00 × 10-12 M to 1.00 × 10-7 M of TC sensitively, with a limit of detection of 3.72 × 10-13 M. In addition, the proposed MIP-PEC sensor demonstrated good TC detection performance in actual livestock wastewater.

SIGNIFICANCE

The strategy based on MOF pore-confined quantum dots can effectively enhance the photocurrent response of the photosensitive substrate. Simultaneously, the MIP constructed by in-situ rapid UV-polymerization showed excellent anti-interference and reusable properties. This work provides a promising MIP-PEC cathodic sensing method for the rapid and sensitive detection of antibiotics in complex-matrix environmental samples.

Using halofuginone-silver thermosensitive nanohydrogels with antibacterial and anti-inflammatory properties for healing wounds infected with Staphylococcus aureus

Contamination by pathogens, such as bacteria, can irritate a wound and prevent its healing, which may affect the physical fitness of the infected person. As such, the development of more novel nano-biomaterials able to cope with the inflammatory reaction to bacterial infection during the wound healing process to accelerate wound healing is required. Herein, a halofuginone‑silver nano thermosensitive hydrogel (HTPM&AgNPs-gel) was prepared via a physical swelling method. HTPM&AgNPs-gel was characterized based on thermogravimetric analysis, differential scanning calorimetry, morphology, injectability, and rheological mechanics that reflected its exemplary nature. Moreover, HTPM&AgNPs-gel was further tested for its ability to facilitate healing of skin fibroblasts and exert antibacterial activity. Finally, HTPM&AgNPs-gel was tested for its capacity to accelerate general wound healing and treat bacterially induced wound damage. HTPM&AgNPs-gel appeared spherical under a transmission electron microscope and showed a grid structure under a scanning electron microscope. Additionally, HTPM&AgNPs-gel demonstrated excellent properties, including injectability, temperature-dependent swelling behavior, low loss at high temperatures, and appropriate rheological properties. Further, HTPM&AgNPs-gel was found to effectively promote healing of skin fibroblasts and inhibit the proliferation of Escherichia coli and Staphylococcus aureus. An evaluation of the wound healing efficacy demonstrated that HTPM&AgNPs-gel had a more pronounced ability to facilitate wound repair and antibacterial effects than HTPM-gel or AgNPs-gel alone, and exhibited ideal biocompatibility. Notably, HTPM&AgNPs-gel also inhibited inflammatory responses in the healing process. HTPM&AgNPs-gel exhibited antibacterial, anti-inflammatory, and scar repair features, which remarkably promoted wound healing. These findings indicated that HTPM&AgNPs-gel holds great clinical potential as a promising and valuable wound healing treatment.

Boosted Photocatalytic Degradation of Atrazine Using Oxygen-Modified g-C3N4: Investigation of the Reactive Oxygen Species Interconversion

Elaborating the specific reactive oxygen species (ROS) involved in the photocatalytic degradation of atrazine (ATZ) is of great significance for elucidating the underlying mechanism. This study provided conclusive evidence that hydroxyl radicals (·OH) were the primary ROS responsible for the efficient photocatalytic degradation of ATZ, thereby questioning the reliability of widely adopted radical quenching techniques in discerning authentic ROS species. As an illustration, oxygen-modified g-C3N4 (OCN) was prepared to counteract the limitations of pristine g-C3N4 (CN). Comparative assessments between CN and OCN revealed a remarkable 10.44-fold improvement in the photocatalytic degradation of ATZ by OCN. This enhancement was ascribed to the increased content of C-O functional groups on the surface of the OCN, which facilitated the conversion of superoxide radicals (·O2-) into hydrogen peroxide (H2O2), subsequently leading to the generation of ·OH. The increased production of ·OH contributed to the efficient dealkylation, dechlorination, and hydroxylation of ATZ. Furthermore, toxicity assessments revealed a significant reduction in ATZ toxicity following its photocatalytic degradation by OCN. This study sheds light on the intricate interconversion of ROS and offers valuable mechanistic insights into the photocatalytic degradation of ATZ.

Decade Milestone Advancement of Defect-Engineered g-C3N4 for Solar Catalytic Applications

Over the past decade, graphitic carbon nitride (g-C3N4) has emerged as a universal photocatalyst toward various sustainable carbo-neutral technologies. Despite solar applications discrepancy, g-C3N4 is still confronted with a general fatal issue of insufficient supply of thermodynamically active photocarriers due to its inferior solar harvesting ability and sluggish charge transfer dynamics. Fortunately, this could be significantly alleviated by the "all-in-one" defect engineering strategy, which enables a simultaneous amelioration of both textural uniqueness and intrinsic electronic band structures. To this end, we have summarized an unprecedently comprehensive discussion on defect controls including the vacancy/non-metallic dopant creation with optimized electronic band structure and electronic density, metallic doping with ultra-active coordinated environment (M-Nx, M-C2N2, M-O bonding), functional group grafting with optimized band structure, and promoted crystallinity with extended conjugation π system with weakened interlayered van der Waals interaction. Among them, the defect states induced by various defect types such as N vacancy, P/S/halogen dopants, and cyano group in boosting solar harvesting and accelerating photocarrier transfer have also been emphasized. More importantly, the shallow defect traps identified by femtosecond transient absorption spectra (fs-TAS) have also been highlighted. It is believed that this review would pave the way for future readers with a unique insight into a more precise defective g-C3N4 "customization", motivating more profound thinking and flourishing research outputs on g-C3N4-based photocatalysis.

Performance and mechanism investigation on the enhanced photocatalytic removal of atrazine on S-doped g-C3N4

Developing efficient method for removing low-concentration atrazine, a poisonous chlorinated triazine herbicide with poor biodegradability, was an important measure to control its risk. In this work, highly efficient photocatalytic oxidation of atrazine was achieved on S-doped g-C3N4 (S-g-C3N4). Approximate 99.6% of atrazine was removed in 2 h with a reaction rate constant of 2.76 h-1, nearly 2.44 times that on g-C3N4. The mechanism investigation indicated the improved photocatalytic performance of S-g-C3N4 could be attributed to the enlarged specific surface area, extended light absorption as well as the accelerated separation of the photogenerated charge carriers, which was brought about by the successful doping of sulfur in g-C3N4. Meanwhile, the influence of sulfur doping on the generation and contribution of different reactive species in atrazine removal were also elucidated. It revealed that compared with g-C3N4, the more positive valence band potential of S-g-C3N4 was beneficial to produce more singlet oxygen, which could react synergistically with the superoxide radicals, leading to the improved atrazine removal efficiency. The S-g-C3N4 based photocatalytic system also showed preferential photocatalytic oxidation capability in removing other triazine pesticides compared with 3-chlorophenol (3-CP). The potential applicability of the S-g-C3N4 based photocatalytic system in removing atrazine in high salty water was also investigated, which exhibited superior anti-interference ability towards virous coexistent ions. This work will provide essential and fundamental information for establishing efficient photocatalytic system for triazine type pollutants in waters.

G-C3N4 sheet nanoarchitectonics with island-like crystalline/amorphous homojunctions towards efficient H2 and H2O2 evolution

Photocatalystic evolution of H2O2 from water and oxygen has attracted significant attention because of environmentally friendly. The absorption in visible and hydrophilic feature of graphitic carbon nitride (g-C3N4) make it a good candidate. In this paper, a rapid post-treatment at high temperature was developed to obtain g-C3N4 nanosheets with abundant crystalline/amorphous interfaces to form homojunctions, which optimized uniplanar carrier mobility dynamics. The conversion from bulk to two-dimensional g-C3N4 resulted from the breakage of interplanar hydrogen bonds and interlayer Van der Waals force. The unique morphology not only rendered photocatalyst with larger specific surface area but also inhibited the robust volume recombination of charge carriers. The accelerated charge carriers flow at the interface, interplane and interlayer together ameliorated the separation and transfer of electrons and holes. A new-emerged n→π* transition ameliorated the poor light utilization efficiency. Beyond the increased photocatalytic H2 evolution property (779.2 μmol g-1 h-1), optimized sample displayed a H2O2 evolution activity as high as 4877.1 μM g-1 h-1 under visible light illumination, which was ∼5.8 times of that of bulk g-C3N4. Detailed photocatalytic mechanism investigation manifested that the two-step single-electron oxygen reduction process occupied the dominant status in H2O2 evolution. This work proposed a novel strategy for obtaining g-C3N4 homojunctions as a promising bi-functional metal-free catalyst to be applied in clean energy production field.

Preparation of Structure Vacancy Defect Modified Diatomic-Layered g-C3 N4 Nanosheet with Enhanced Photocatalytic Performance

Structure self-modification of graphitic carbon nitride (g-C3 N4 ) without the assistance of other species has attracted considerable attention. In this study, the structure vacancy defect modified diatomic-layered g-C3 N4 nanosheet (VCN) is synthesized by thermal treatment of bulk g-C3 N4 in a quartz tube with vacuum atmosphere that will generate a pressure-thermal dual driving force to boost the exfoliation and formation of structure vacancy for g-C3 N4 . The as-prepared VCN possesses a large specific surface area with a rich pore structure to provide more active centers for catalytic reactions. Furthermore, the as-formed special defect level in VCN sample can generate a higher exciton density at photoexcitation stage. Meanwhile, the photogenerated charges will rapidly transfer to VCN surface due to the greatly shortened transfer path resulting from the ultrathin structure (≈1.5 nm), which corresponds to two graphite carbon nitride atomic layers. In addition, the defect level alleviates the drawback of enlarged bandgap caused by the quantum size effect of nano-scaled g-C3 N4 , resulting in a well visible-light utilization. As a result, the VCN sample exhibits an excellent photocatalytic performance both in hydrogen production and photodegradation of typical antibiotics.

Construction of Built-In Electric Field in TiO2@Ti2O3 Core-Shell Heterojunctions toward Optimized Photocatalytic Performance

A series of Ti₂O₃@TiO₂ core-shell heterojunction composite photocatalysts with different internal electric fields were synthesized using simple heat treatment methods. The synthesized Ti₂O₃@TiO₂ core-shell heterojunction composites were characterized by means of SEM, XRD, PL, UV-Vis, BET, SPV, TEM and other related analytical techniques. Tetracycline (TC) was used as the degradation target to evaluate the photocatalytic performance of the synthesized Ti₂O₃@TiO₂ core-shell heterojunction composites. The relevant test results show that the photocatalytic performance of the optimized materials has been significantly enhanced compared to Ti₂O₃, while the photocatalytic degradation rate has increased from 28% to 70.1%. After verification via several different testing and characterization techniques, the excellent catalytic performance is attributed to the efficient separation efficiency of the photogenerated charge carriers derived from the built-in electric field formed between Ti₂O₃ and TiO₂. When the recombination of electrons and holes is occupied, more charges are generated to reach the surface of the photocatalyst, thereby improving the photocatalytic degradation efficiency. Thus, this work provides a universal strategy to enhance the photocatalytic performance of Ti₂O₃ by coupling it with TiO₂ to build an internal electric field.