Atomic H*-mediated electrochemical removal of low concentration antimonite and recovery of antimony from water

Progress and challenges in the use of electrochemical oxidation and reduction processes for heavy metals removal and recovery from wastewaters

Heavy metals-laden industrial wastewater represents both a threat to ecosystems and human health and, in some instances, a potential source of valuable metals however the presence of organic ligands that bind the metals in heavy metal complexes (HMCs) renders metal removal (and, where appropriate, recovery) difficult. Electrochemical-based oxidation and reduction processes represent a potentially promising means of degrading the organic ligands and reducing their ability to retain the metals in solution. In this state-of-the-art review, we provide a comprehensive overview of the current status on use of electrochemical redox technologies for organic ligand degradation and subsequent heavy metal removal and recovery from industrial wastewaters. The principles and degradation mechanism of common organic ligands by various types of electrochemical redox technologies are discussed in this review and consideration given to recent progress in electrode materials synthesis, cell architecture, and operation of electrochemical redox systems. Furthermore, we highlight the current challenges in application of electrochemical redox technologies for treatment of HMC-containing wastewaters including (i) limited understanding of the chemical composition of industrial wastewaters, (ii) constrained mass transfer process affecting the direct/indirect electron transfer, (iii) absence of approaches to convert recovered metal into high-value-added products, and (iv) restricted semi-or full-industrial-scale application of these technologies. Potential strategies for improvement are accordingly provided to guide efforts in addressing these challenges in future research.

Utilizing an Integrated Flow Cathode-Membrane Filtration System for Effective and Continuous Electrochemical Hydrodechlorination

Pd-based electrodes are recognized to facilitate effective electrochemical hydrodechlorination (EHDC) as a result of their superior capacity for atomic hydrogen (H*) generation. However, challenges such as electrode stability, feasibility of treating complex matrices, and high cost associated with electrode synthesis hinder the application of Pd-based electrodes for EHDC. In this work, we investigated the feasibility of degrading 2,4-dichlorophenol (2,4-DCP) by EHDC employing Pd-loaded activated carbon particles, prepared via a simple wet-impregnation method, as a flow cathode (FC) suspension. Compared to other Pd-based EHDC studies, a much lower Pd loading (0.02-0.08 mg cm-2) was used. Because of the excellent mass transfer in the FC system, almost 100% 2,4-DCP was hydrodechlorinated to phenol within 1 h. The FC system also showed excellent performance in treating complex water matrices (including hardness ion-containing wastewater and various other chlorinated organics such as 2,4-dichlorobenzoic acid and trichloroacetic acid) with a relatively low energy consumption (0.26-1.56 kW h m-3 mg-1 of 2,4-DCP compared to 0.32-7.61 kW h m-3 mg-1 of 2,4-DCP reported by other studies). The FC synthesized here was stable over 36 h of continuous operation, indicating its potential suitability for real-world applications. Employing experimental investigations and mathematical modeling, we further show that hydrodechlorination of 2,4-DCP occurs via interaction with H*, with no role of direct electron transfer and/or HO•-mediated processes in the removal of 2,4-DCP.

High energy-efficiency decomplexation of metal-complexes by H*-mediated electro-reduction on hydroxyphenyl Co-porphyrin catalysts

Electrochemical reduction of metal-organic complex pollutants has been recognized as an environmental benign method that operates at mild condition. However, the selective reduction of metal complexes and energy consumption in cathodic process are still a big challenge. Herein, we found that hydroxyphenyl Co-porphyrin catalyst (CoTH@NG) realizes the highly selective decomplexation of metal-organic complexes by H* -mediated reduction, and simultaneously the impressive recovery efficiency of metal ions. Density functional theory (DFT) confirms the generation and capturing ability of H* on CoTH@NG, verifying the dominant role of H* -mediated reduction in the selective decomplexation of Cu-EDTA. CoTH@NG realizes the superior energy efficiency for Cu-EDTA removal (279.3 g kWh-1 of EEOCu-EDTA) and Cu recovery (48.6 g kWh-1 of EEOCu), which are remarkably 3.3 × 102 and 9.7 × 102 times higher than traditional carbon cloth electrode. Moreover, the recovered Cu0(s) nanowires on the electrode surface can be efficiently regenerated in HCOOH by a galvanic reaction through the electron channel of CoTH@NG, regenerating catalytic electrode. This is one of the pioneer studies on H* -mediated electro-reduction decomplexation of metal-complexes, metal recovery, and electrode regeneration on CoTH@NG, which providing a technical strategy for developing efficient electrocatalytic system for pollution control. Environmental Implication Metal complexes is a dramatic increase in the electroplating and mining industries, and seriously affect both public health and environmental sustainability. Our work reported a new hydroxyphenyl Co-porphyrin catalyst (CoTH@NG) which achieves the selective decomplexation of metal-organic complexes, and simultaneously the recovery of metal ions. CoTH@NG realizes the superior energy efficiency for Cu-EDTA removal (279.3 g kWh-1) and Cu0(s) recovery (48.6 g kWh-1), which are remarkably 3.3 × 102 and 9.7 × 102 times higher than traditional carbon cloth electrode. Moreover, the recovered Cu0(s) can be efficiently regenerated in HCOOH by a galvanic reaction through the electron channel of CoTH@NG, regenerating catalytic electrode.

Separation and reutilization of heavy metal ions in wastewater assisted by p-BN adsorbent

Extracting heavy metal ions from wastewater has significant implications for both environmental remediation and resource preservation. However, the conventional adsorbents still suffer from incomplete ion removal and low utilization efficiency of the recovered metals. Herein, we present an extraction and reutilization method assisted by porous boron nitride (p-BN) containing high-density N atoms for metal recovery with simultaneous catalyst formation. The p-BN exhibits stable and efficient metal adsorption performance, particularly for ultra-trace-level water purification. The distribution coefficients towards Pb2+, Cd2+, Co2+ and Fe3+ can exceed 106 mL g-1 and the residual concentrations that reduced from 1 mg L-1 to 0.8-1.3 μg L-1 are much lower than the acceptable limits in drinking water standards of World Health Organization. Meanwhile, the used p-BN after Co ion adsorption can be directly adopted as a high-efficiency catalyst for activating peroxymonosulfate (PMS) in organic pollutant degradation without additional post-treatment, avoiding the secondary metal pollution and the problems of neglected manpower and energy consumption. Moreover, a flow-through multistage utilization system assisted by p-BN/polyvinylidene fluoride (PVDF) membrane is constructed for achieving both metal ion separation and reutilization in the removal of organic pollutants, providing a new avenue for sustainable wastewater remediation.

Pioneering Piezoelectric-Driven Atomic Hydrogen for Efficient Dehalogenation of Halogenated Organic Pollutants

The electrocatalytic hydrodehalogenation (EHDH) process mediated by atomic hydrogen (H*) is recognized as an efficient method for degrading halogenated organic pollutants (HOPs). However, a significant challenge is the excessive energy consumption resulting from the recombination of H* to H2 production in the EHDH process. In this study, a promising strategy was proposed to generate piezo-induced atomic H*, without external energy input or chemical consumption, for the degradation and dehalogenation of HOPs. Specifically, sub-5 nm Ni nanoparticles were subtly dotted on an N-doped carbon layer coating on BaTiO3 cube, and the resulted hybrid nanocomposite (Ni-NC@BTO) can effectively break C-X (X = Cl and F) bonds under ultrasonic vibration or mechanical stirring, demonstrating high piezoelectric driven dehalogenation efficiencies toward various HOPs. Mechanistic studies revealed that the dotted Ni nanoparticles can efficiently capture H* to form Ni-H* (Habs) and drive the dehalogenation process to lower the toxicity of intermediates. COMSOL simulations confirmed a "chimney effect" on the interface of Ni nanoparticle, which facilitated the accumulation of H+ and enhanced electron transfer for H* formation by improving the surface charge of the piezocatalyst and strengthening the interfacial electric field. Our work introduces an environmentally friendly dehalogenation method for HOPs using the piezoelectric process independent of the external energy input and chemical consumption.

Rational design of electrocatalytic system to selective transform nitrate to nitrogen

Nitrate (NO3-) is one of the most common pollutants in natural bodies of water and as such threatens both human health and the safety of aquatic environment. There are efficient electrochemical techniques to directly remove NO3-, but inexpensive, selective and electrocatalytic strategies to eliminate NO3- by converting it into benign nitrogen (N2) remain challenging. This work studied Cu particles that were formed directly on a Ni foam (Cu-NF) and evaluated their electrocatalytic NO3- reduction performance. The use of carbon nanotubes (CNT) functionalized with titanium suboxides (TiSO) as the anode facilitated the generation of active chlorine species that had a key role in the removal of NH4+. An electrochemical system that integrated a Cu-NF cathode with a TiSO-CNT anode could remove 88.5% of NO3- with a >99% N2 selectivity when operated over 6 h (4.1 × 10-4 h-1) at a potential of -1.2 V vs Ag/AgCl. Because the chloride ions are very common in natural sources of water, this technique offers a sustainable and environmentally friendly approach for the removal of NO3- from contaminated water sources.

Separable alginate gel spheres encapsulated with La-Fe modified biochar for efficient adsorption of Sb(III) with high capacity

Sb and its compounds have been widely used in various industrial applications. Therefore, the preparation of Sb adsorbents with easy recovery and excellent adsorption levels is an urgent problem that must be resolved. By calcining and treating La/Fe metal-organic frameworks (MOF) biochar as a precursor, a loaded La-Fe-modified water hyacinth biochar was synthesised and used as a filler to synthesise iron alginate composite gel spheres, MBC/algFe. Through a series of static adsorption experiments, the effects of different filler addition ratios, solution pH, reaction time, coexisting ions, and other factors on the adsorption of Sb(III) were investigated. According to the Langmuir model, the maximum adsorption capacity of MBC/algFe at 25 ℃ was 277.8 mg·g-1. The adsorption mechanism mainly involved hydrogen bonding and metal-organic complexation interactions.

Microreactor-based micro/nanomaterials: fabrication, advances, and outlook

Micro/nanomaterials are widely used in optoelectronics, environmental materials, bioimaging, agricultural industries, and drug delivery owing to their marvelous features, such as quantum tunneling, size, surface and boundary, and Coulomb blockade effects. Recently, microreactor technology has opened up broad prospects for green and sustainable chemical synthesis as a powerful tool for process intensification and microscale manipulation. This review focuses on recent progress in the microreactor synthesis of micro/nanomaterials. First, the fabrication and design principles of existing microreactors for producing micro/nanomaterials are summarized and classified. Afterwards, typical examples are shown to demonstrate the fabrication of micro/nanomaterials, including metal nanoparticles, inorganic nonmetallic nanoparticles, organic nanoparticles, Janus particles, and MOFs. Finally, the future research prospects and key issues of microreactor-based micro/nanomaterials are discussed. In short, microreactors provide new ideas and methods for the synthesis of micro/nanomaterials, which have huge potential and inestimable possibilities in large-scale production and scientific research.