Enhanced degradation of poly(ethylene terephthalate) by the addition of lactic acid / glycolic acid: composting degradation, seawater degradation behavior and comparison of degradation mechanism

Invasion of Trifolium repens L. aggravated by biodegradable plastics: adjustable strategy for foraging N and P

The invasion of alien plant and the pollution caused by soil microplastics have emerged as significant ecological threats. Recent studies have demonstrated aggravating effect of non-biodegradable microplastics on plant invasion. However, the impact of biodegradable microplastics (BMPs) on plant invasion remains unclear. Therefore, it is imperative to explore the impact of BMPs on plant invasion. In this study, a 30-day potting experiment with Trifolium repens L. (an invasive plant) and Oxalis corniculata L. (a native plant) was conducted to evaluate the influence of BMPs on T. repens's invasion. The findings revealed that BMPs results in a reduction in available N and P contents, thereby facilitating the colonization of arbuscular mycorrhizal fungi on T. repens 's roots. Consequently, T. repens adjusted its N and P foraging strategy by increasing P absorption ratio, and enhancing the accumulation of N and P in leaves. This ultimately led to the decrease of relative neighbor effect index of T. repens, indicating an aggravated invasion by T. repens. This study significantly enhances and expands the understanding of mechanisms by which microplastics aggravate plant invasion.

Closed-Loop Polymer-to-Polymer Upcycling of Waste Poly (Ethylene Terephthalate) into Biodegradable and Programmable Materials

Poly(ethylene terephthalate) (PET), extensively employed in bottles, film, and fiber manufacture, has generated persistent environmental contamination due to its non-degradable nature. The resolution of this issue requires the conversion of waste PET into valuable products, often achieved through depolymerization into monomers. However, the laborious purification procedures involved in the extraction of monomers pose challenges and constraints on the complete utilization of PET. Herein, a strategy is demonstrated for the polymer-to-polymer upcycling of waste PET into high-value biodegradable and programmable materials named PEXT. This process involves reversible transesterifications dependent on ester bonds, wherein commercially available X-monomers from aliphatic diacids and diols are introduced, utilizing existing industrial equipment for complete PET utilization. PEXT features a programmable molecular structure, delivering tailored mechanical, thermal, and biodegradation performance. Notably, PEXT exhibits superior mechanical performance, with a maximal elongation at break of 3419.2 % and a toughness of 270.79 MJ m-3. These characteristics make PEXT suitable for numerous applications, including shape-memory materials, transparent films, and fracture-resistant stretchable components. Significantly, PEXT allows closed-loop recycling within specific biodegradable analogs by reprograming PET or X-monomers. This strategy not only offers cost-effective advantages in large-scale upcycling of waste PET into advanced materials but also demonstrates its enormous prospect in environmental conservation.

Hydrolase and plastic-degrading microbiota explain degradation of polyethylene terephthalate microplastics during high-temperature composting

This research aims to explore the degradation properties of polyethylene terephthalate (PET) by PET hydrolase (WCCG) in high-temperature composting and its impact on microbial communities. PET degradation, composting parameters and microbial communities were assessed in 220 L sludge composters with PET and WCCG using high-throughput sequencing. Results showed that WCCG addition led to a deceleration of the humification process and a reduction in the relative abundance of thermophilic genera. Potential PET degrading microbiota, e.g. Acinetobacter, Bacillus, were enriched in the plastisphere in the composters where PET reduced by 26 % without WCCG addition. The external introduction of the WCCG enzyme to compost predominantly instigates a chemical reaction with PET, concurently curtailing the proliferation of plastic-degrading bacteria, leading to a 35 % degradation of PET. Both the WCCG enzyme and the microbiota associated with plastic-degradation showed the potential for reducing PET, offering a novel method for mitigating pollution caused by environmental microplastics.

All-natural environmentally degradable poly (butylene terephthalate-co-caprolactone): A theoretical and experimental study of its degradation properties and mechanisms

The design and production of materials with excellent mechanical properties and biodegradability face significant challenges. Poly (butylene terephthalate-co-caprolactone) copolyesters (PBTCL) is obtained by modifying the engineering plastic polybutylene terephthalate (PBT) with a simple one-pot process using readily biodegradable ε-caprolactone (ε-CL). The material has mechanical properties comparable to those of commercial biodegradable copolyester PBAT. Besides, this copolyester exhibited remarkable degradability in natural environments such as soil and ocean, for example, PBTCL1.91 lost >40 % of its weight after 6 months of immersion in the Bohai Sea. The effect and diversity of specific microorganisms acting on degradation in the ocean were analyzed by 16 s rDNA gene sequencing. Theoretical calculations such as Fukui function and DFT, and experimental studies on water-soluble intermediates and residual matrixes produced after degradation, confirmed that the insertion CL units not only act as active sites themselves susceptible to hydrolysis reactions, but also promote the reactivity of ester bonds between aromatic segments. This work provides insight for the development of novel materials with high performance and environmental degradability.

Degradation Characteristics of Cellulose Acetate in Different Aqueous Conditions

Cellulose acetate (CA) is widely used in cigarette filters and packaging films, but due to its acetylation, it is difficult to degrade in the natural environment, and the problem of pollution has become a serious challenge. Understanding the degradation behavior and performance of CA in different environments is the basis and prerequisite for achieving its comprehensive utilization and developing efficient degradation methods. In this study, we investigated the degradation performance of CA in different aqueous environments to evaluate the effects of pH, salinity and microorganisms on CA degradation. The CA tows and films were immersed in HCl, NaOH solution, river water, seawater or homemade seawater for 16 weeks and the degradation mechanism was investigated by the changes in weight loss rate, degree of substitution, hydrophilicity, molecular structure and surface morphology. The results showed that the degradation of CA tow and film were the fastest in NaOH solution; the weight loss rates after 16 weeks were 40.29% and 39.63%, respectively, followed by HCl solution, and the degradation performance of CA tow was better than that of film. After 16 weeks of degradation in river water, seawater and homemade seawater, all the weight loss rates were less than 3%. In summary, this study illustrated that the environmental acidity, basicity and high concentration of inorganic salts had a critical promotion effect on the non-enzymatic hydrolysis of CA, whereas the number and type of microorganisms were the key factors affecting the biodegradation of CA.

Synthesis and Characterization of High Glycolic Acid Content Poly(glycolic acid-co-butylene adipate-co-butylene terephthalate) and Poly(glycolic acid-co-butylene succinate) Copolymers with Improved Elasticity

Poly(glycolic acid) (PGA) is a biodegradable polymer with high gas barrier properties, mechanical strength, and heat deflection temperature. However, PGA's brittleness severely limits its application in packaging, creating a need to develop PGA-based copolymers with improved elasticity that maintain its barrier properties and hydrolytic degradability. In this work, a series of PGBAT (poly(glycolic acid-co-butylene) adipate-co-butylene terephthalate) copolymers containing 21-92% glycolic acid (nGA) with Mw values of 46,700-50,600 g mol-1 were synthesized via melt polycondensation, and the effects of altering the nGA on PGBAT's thermomechanical properties and hydrolysis rate were investigated. Poly(glycolic acid-co-butylene succinate) (PGBS) and poly(glycolic acid-co-butylene terephthalate) (PGBT) copolymers with high nGA were synthesized for comparison. DSC analysis revealed that PGBAT21 (nGA = 21%) and PGBAT92 were semicrystalline, melting between 102.8 and 163.3 °C, while PGBAT44, PGBAT86-89, PGBT80, and PGBS90 were amorphous, with Tg values from -19.0 to 23.7 °C. These high nGA copolymers showed similar rates of hydrolysis to PGA, whereas those containing <50% GA showed almost no mass loss over the testing period. Their mechanical properties were highly dependent upon their crystallinity and improved significantly after annealing. Of the high nGA copolymers, annealed PGBS90 (Mw 97,000 g mol-1) possessed excellent mechanical properties with a modulus of 588 MPa, tensile strength of 30.0 MPa, and elongation at break of 171%, a significant improvement on PGA's elongation at break of 3%. This work demonstrates the potential of enhancing PGA's flexibility by introducing minor amounts of low-cost diols and diacids into its synthesis.

Fluorescence tracing the degradation process of biodegradable PBAT: Visualization and high sensitivity

Biodegradable plastics have emerged as a potential solution to the mounting plastic pollution crisis. However, current methods for evaluating the degradation of these plastics are limited in detecting structural changes rapidly and accurately, particularly for PBAT, which contains worrying benzene rings. Inspired by the fact that the aggregation of conjugated groups can endow polymers with intrinsic fluorescence, this work found that PBAT emits a bright blue-green fluoresces under UV irradiation. More importantly, we pioneered a degradation evaluation approach to track the degradation process of PBAT via fluorescence. A blue shift of fluorescence wavelength as the thickness and molecular weight of PBAT film decreased during degradation in an alkali solution was observed. Additionally, the fluorescence intensity of the degradation solution increased gradually as the degradation progressed, and was found to be exponentially correlated with the concentration of benzene ring-containing degradation products following filtration with the correlation coefficient is up to 0.999. This study proposes a promising new strategy for monitoring the degradation process with visualization and high sensitivity.