Computer chip-inspired design of nanocellulose/carbon dots hydrogel as superior intensifier of nano-sized photocatalyst for effective Cr(VI) removal

β-Cyclodextrin/carbon dots-grafted cellulose nanofibrils hydrogel for enhanced adsorption and fluorescence detection of levofloxacin

In this study, a novel hydrogel, β-cyclodextrin/carbon dots-grafted cellulose nanofibrils hydrogel (βCCH), was fabricated for removal and fluorescence determination of levofloxacin (LEV). A comprehensive analysis was performed to characterize its physicochemical properties. Batch adsorption experiments were conducted, revealing that βCCH reached a maximum adsorption capacity of 1376.9 mg/g, consistent with both Langmuir and pseudo-second-order models, suggesting that the adsorption process of LEV on βCCH was primarily driven by chemical adsorption. The removal efficiency of βCCH was 99.2 % under the fixed conditions (pH: 6, initial concentration: 20 mg/L, contact time: 300 min, temperature: 25 °C). The removal efficiency of βCCH for LEV still achieved 97.3 % after five adsorption-desorption cycles. By using βCCH as a fluorescent probe for LEV, a fast and sensitive method was established with linear ranges of 1-120 mg/L and 0.2-1.0 μg/L and a limit of detection (LOD) as low as 0.09 μg/L. The viability of βCCH was estimated based on the economic analysis of the synthesis process and the removal of LEV, demonstrating that βCCH was more cost-effective than commercial activated carbon. This study provides a novel approach for preparing a promising antibiotic detection and adsorption material with the advantages of stability, and cost-effectiveness.

Cellulose-based materials in environmental protection: A scientometric and visual analysis review

As sustainable materials, cellulose-based materials have attracted significant attention in the field of environmental protection, resulting in the publication of numerous academic papers. However, there is a scarcity of literature that involving scientometric analysis within this specific domain. This review aims to address this gap and highlight recent research in this field by utilizing scientometric analysis and a historical review. As a result, 21 highly cited articles and 10 mostly productive journals were selected out. The scientometric analysis reveals that recent studies were objectively clustered into five interconnected main themes: extraction of cellulose from raw materials and its degradation, adsorption of pollutants using cellulose-based materials, cellulose-acetate-based membrane materials, nanocellulose-based materials, and other cellulose-based materials such as carboxymethyl cellulose and bacterial cellulose for environmental protection. Analyzing the distribution of author keywords and thoroughly examining relevant literature, the research focuses within these five themes were summarized. In the future, the development of eco-friendly and cost-effective methods for extracting and preparing cellulose and its derivatives, particularly nanocellulose-based materials, remains an enduring pursuit. Additionally, machine learning techniques holds promise for the advancement and application of cellulose-based materials. Furthermore, there is potential to expand the research and application scope of cellulose-based materials for environmental protection.

Review of carbon dot-hydrogel composite material as a future water-environmental regulator

As water pollution and scarcity pose severe threats to the sustainable progress of human society, it is important to develop a method or materials that can accurately and efficiently detect pollutants and purify aquatic environments or exploit marine resources. The compositing of photoluminescent and hydrophilic carbon dots (CDs) with hydrogels bearing three-dimensional networks to form CD-hydrogel composites to protect aquatic environments is a "win-win" strategy. Herein, the feasibility of the aforementioned method has been demonstrated. This paper reviews the recent progress of CD-hydrogel materials used in aquatic environments. First, the synthesis methods for these composites are discussed, and then, the composites are categorized according to different methods of combining the raw materials. Thereafter, the progress in research on CD-hydrogel materials in the field of water quality detection and purification is reviewed in terms of the application of the mechanisms. Finally, the current challenges and prospects of CD-hydrogel materials are described. These results are expected to provide insights into the development of CD-hydrogel composites for researchers in this field.

Nanocellulose-stabilized nanocomposites for effective Hg(II) removal and detection: a comprehensive review

Mercury pollution, with India ranked as the world's second-largest emitter, poses a critical environmental and public health challenge and underscores the need for rigorous research and effective mitigation strategies. Nanocellulose is derived from cellulose, the most abundant natural polymer on earth, and stands out as an excellent choice for mercury ion remediation due to its remarkable adsorption capacity, which is attributed to its high specific surface area and abundant functional groups, enabling efficient Hg(II) ion removal from contaminated water sources. This review paper investigates the compelling potential of nanocellulose as a scavenging tool for Hg(II) ion contamination. The comprehensive examination encompasses the fundamental attributes of nanocellulose, its diverse fabrication techniques, and the innovative development methods of nanocellulose-based nanocomposites. The paper further delves into the mechanisms that underlie Hg removal using nanocellulose, as well as the integration of nanocellulose in Hg detection methodologies, and also acknowledges the substantial challenges that lie ahead. This review aims to pave the way for sustainable solutions in mitigating Hg contamination using nanocellulose-based nanocomposites to address the global context of this environmental concern.

Cellulose nanofibril/titanate nanofiber modified with CdS quantum dots hydrogel with 3D porous structure: A stable photocatalytic adsorbent for Cr(VI) removal

A novel cellulose nanofibril/titanate nanofiber modified with CdS quantum dots hydrogel (CTH) was synthesized as an effective, stable, and recyclable photocatalytic adsorbent using cellulose nanofibril (CN), titanate nanofiber (TN), and CdS quantum dots. Within the CTH structure, CN formed an essential framework, creating a three-dimensional (3D) porous structure that enhanced the specific surface area and provided abundant adsorption sites for Cr(VI). Simultaneously, TN modified with CdS quantum dots (TN-CdS) served as a nanoscale Z-type photocatalyst, facilitating the efficient separation of photoinduced electrons and holes, further increasing the photocatalytic efficiency. The morphological, chemical, and optical properties of CTH were thoroughly characterized. The CTH demonstrated the maximum theoretical adsorption capacity of 373.3 ± 14.2 mg/g, which was 3.4 times higher than that of CN hydrogel. Furthermore, the photocatalytic reduction rate constant of the CTH was 0.0586 ± 0.0038 min-1, which was 6.4 times higher than that of TN-CdS. Notably, CTH displayed outstanding stability, maintaining 84.9 % of its initial removal efficiency even after undergoing five consecutive adsorption-desorption cycles. The remarkable performance of CTH in Cr(VI) removal was attributed to its 3D porous structure, comprising CN and TN-CdS. These findings provide novel insights into developing a stable photocatalytic adsorbent for Cr(VI) removal.

Fluorescent starch-based hydrogel with cellulose nanofibrils and carbon dots for simultaneous adsorption and detection of Pb(II)

The adsorption removal of lead (Pb) ions has become a crucial area of research due to the potential health hazards associated with Pb contamination. Developing cost-effective adsorbents for the removal of Pb(II) ions is significantly important. Hence, a novel fluorescent starch-based hydrogel (FSH) using starch (ST), cellulose nanofibrils (CN), and carbon dots (CD) was fabricated for simultaneous adsorption and detection of Pb(II). A comprehensive characterization of FSH, including its morphological features, chemical composition, and fluorescence characteristics, was conducted. Notably, FSH exhibited a maximum theoretical adsorption capacity of 265.9 mg/g, which was 13.0 times higher than that of pure ST. Moreover, FSH was employed as a fluorescent sensor for Pb(II) determination, achieving a limit of detection (LOD) of 0.06 μg/L. An analysis was further performed to investigate the adsorption and detection mechanisms of Pb(II) utilizing FSH. This study provides valuable insights into the production of a novel cost-effective ST-based adsorbent for the removal of Pb(II) ions.

Preparation of amino-modified carbon quantum dots-ZnO/cellulose nanofiber multifunctional hydrogel: Enhanced adsorption synergistic photoreduction and reversible fluorescence response visual recognition of Cr(VI)

This work innovatively used cellulose nanofibers as a photocatalyst carrier, which could recycle nano-photocatalysts and minimize nanoparticle aggregation. The morphology, structures, chemical composition, optical-electronic properties and photocatalytic performance of amino-modified carbon quantum dots-ZnO/cellulose nanofiber (N-CQDs-ZnO/CNF: ZCH-2) hydrogel were characterized by SEM, TEM, BET, EDS, XRD, FTIR, UV-vis, XPS, PL and other techniques. The mechanism of Cr(VI) adsorption synergistic photoreduction by ZCH-2 was discussed in detail. The results showed that the prepared ZCH-2 had excellent removal performance for Cr(VI). After 120 min of adsorption and 40 min of photoreduction, the removal efficiency of Cr(VI) was 98.9 %. Compared with ZnO/CNF hydrogel, the adsorption performance of ZCH-2 increased by 268 % and the photoreduction performance increased by 116 %. The adsorption of Cr(VI) by ZCH-2 was controlled by electrostatic attraction and chemical adsorption. The photoreduction kinetic constant of ZCH-2 was 0.106 min-1, which was 8.9 times that of ZnO/CNF hydrogel. The N-CQDs in ZCH-2 could form N-CQDs-metal complexes with Cr(VI), resulting in fluorescence quenching, so Cr(VI) could be visually identified by fluorescence changes. This study provides a new idea for the design and optimization of a new multifunctional hydrogel with efficient adsorption-photoreduction-fluorescence recognition.

Visualized adsorption and enhanced photocatalytic removal of Cr6+ by carbon dots-incorporated fluorescent nanocellulose aerogels

In this study, carbon dots (CDs) and titanate nanofibers (TNs) were mixed with TEMPO-oxidized nanocellulose (TOCNC) to prepare fluorescent nanocellulose aerogels (FNAs) by a Schiff base reaction. The resulting FNA can detect the adsorption of Cr6+ through the fluorescence quenching in CDs and promote the removal of Cr6+ through the synergistic effect of CDs in photocatalysis. The optimized FNA has a maximum adsorption capacity of 543.38 mg/g, higher than most reported Cr6+ adsorbents. This excellent performance is due to the porous structure of the aerogel, which gives it a high specific surface area of 20.53 m2/g and provides abundant adsorption sites. Simultaneously, CDs can enhance the amino-induced Cr6+ adsorption, improve the photocatalytic performance of TNs, and expose more adsorption sites through electrostatic adsorption of amino-induced reduction products (Cr3+). This study explores the preparation of visualized nanosorbents with enhanced photocatalytic removal of Cr6+ and provides a new direction for nanoscale photocatalysts.