Chelating agents supported solar photo-Fenton and sunlight/H2O2 processes for pharmaceuticals removal and resistant pathogens inactivation in quaternary treatment for urban wastewater reuse

Highly efficient catalytic Fenton-Like reactions of bimetallic Fe/Cu chelated on radiation functionalized nonwoven fabric for pollutant control

A remarkably efficient and affordable Fe/Cu bimetallic catalyst featuring a substantial light energy utilization and compatibility with a sizable substrate was developed for Fenton-like reactions aimed at pollutant control. Specifically, a novel strategy was employed to synthesize high-density metal sites (Fe:Cu ≈ 3:1) robustly embedded on polyethylene/polyethylene terephthalate nonwoven fabric (PE/PET NWF) via radiation-induced graft polymerization (RIGP) and subsequent chemical modification, labeled as Fe/Cu-PPAO. Its high effectiveness was demonstrated by degrading 50 mg/L of tetracycline hydrochloride within 30 min in the presence of H2O2 under simulate sunlight irradiation. It was investigated that amidoxime groups regulated the optical gaps and HOMO-LUMO gaps of metal ions to enable the absorption of a broader spectrum light while the Cu2+ facilitated the transfer of electrons between the bimetal ions to achieve an improved reaction path. Furthermore, X-ray absorption fine structure (XAFS) and density functional theory (DFT) calculations further revealed its special complex state and delicate electronic structure between bimetal ions and amidoxime groups. Our study offers a new strategy to synthesize high-density bimetallic sites catalyst for environmental remediation and pushes forward insight into understanding the catalytic mechanism of bimetallic Fenton-like catalysts.

Urban wastewater disinfection by iron chelates mediated solar photo-Fenton: Effects on seven pathogens and antibiotic resistance transfer potential

The effects of solar photo-Fenton (SPF) process mediated by the iron chelate Fe3+ imminodisuccinic acid (Fe:IDS) on both the inactivation of seven relevant pathogens and the potential for antibiotic resistance transfer (degradation of antibiotic resistance genes (ARGs) and after treatment regrowth), in real secondary treated urban wastewater, were investigated for the first time. A comparison with results obtained by sunlight/H2O2 process and Fe3+ ethylenediaminedisuccinic acid (Fe:EDDS) SPF was also carried out. ARGs were quantified by polymerase chain reaction (PCR) in samples before and after (3 h) the treatment. The persistence of the selected pathogens and ARGs was also evaluated in regrowth tests (72 h) under environmentally mimicking conditions. Fe:IDS SPF resulted to be more effective (from 1.4 log removal for Staphylococcus spp. to 4.3 log removal for Escherichia coli) than Fe:EDDS SPF (from 0.8 log removal for Pseudomonas aeruginosa to 2.0 log removal for Total coliphages) and sunlight/H2O2 (from 1.2 log removal for Clostridium perfringens to 3.3 log removal for E. coli) processes for the seven pathogens investigated. Potential pathogens regrowth was also severely affected, as no substantial regrowth was observed, both in presence and absence of catalase. A similar trend was observed for ARGs removal too (until 0.001 fold change expression for qnrS after 3 h). However, a poor effect and a slight increase in fold change was observed after treatment especially for gyrA, mefA and intl1. Overall, the effect of the investigated processes on ARGs was found to be ARG dependent. Noteworthy, coliphages can regrow after sunlight/H2O2 treatment unlike SPF processes, increasing the risk of antibiotic resistance transfer by transduction mechanism. In conclusion, Fe:IDS SPF is an attractive solution for tertiary treatment of urban wastewater in small wastewater treatment plants as it can provide effective disinfection and a higher protection against antibiotic resistance transfer than the other investigated processes.

Unlocking the Potential of Nanobubbles: Achieving Exceptional Gas Efficiency in Electrogeneration of Hydrogen Peroxide

The electrogeneration of hydrogen peroxide (H2 O2 ) via the oxygen reduction reaction is a crucial process for advanced water treatment technologies. While significant effort is being devoted to developing highly reactive materials, gas provision systems used in these processes are receiving less attention. Here, using oxygen nanobubbles to improve the gas efficiency of the electrogeneration of H2 O2 is proposed. Aeration with nanobubbles is compared to aeration with macrobubbles under an identical experimental set-up, with nanobubbles showing a much higher gas-liquid volumetric mass transfer coefficient (KL a) of 2.6 × 10-2 min-1 compared to 2.7 × 10-4 min-1 for macrobubbles. Consequently, nanobubbles exhibit a much higher gas efficiency using 60% of O2 delivered to the system compared to 0.19% for macrobubbles. Further, it is observed that the electrogeneration of H2 O2 using carbon felt electrodes is enhanced using nanobubbles. Under the same dissolved oxygen levels, nanobubbles boost the reaction yield to 84%, while macrobubbles yield only 53.8%. To the authors' knowledge, this is the first study to investigate the use of nanobubbles in electrochemical reactions and demonstrate their ability to enhance gas efficiency and electrocatalytic response. These findings have important implications for developing more efficient chemical and electrochemical processes operating under gas-starving systems.