Enhanced electrokinetic remediation by magnetic induction for the treatment of co-contaminated soil

Enhanced remediation of PFAS-metal co-contaminated soil by ceramsite supported Fe3O4-MoS2 heterojunction as a high-performance piezocatalyst

In this study, a novel piezoremediation system was developed to remediate an actual soil co-polluted by high contents of per- and polyfluoroalkyl substances (PFAS, 5725 μg/kg soil) and heavy metals (6455 mg/kg soil). Two piezocatalysts, MoS2/ceramsite (MC) and Fe3O4-MoS2/ceramsite (FMC), were synthesized using a facile hydrothermal-coprecipitation method. These two materials were employed to treat the co-contaminated soil in soil slurry environment under sonication. FMC exhibited significantly higher piezoremediation performance than MC, wherein 91.6% of PFAS, 97.8% of Cr6+ ions and 81% of total metals (Cr, Cu, Zn and Ni) were removed from the soil after 50 min of the FMC piezoremediation process. FMC also exhibited the advantages of easy separation from the slurry phase and excellent reusability. In comparison with MC, the Fe3O4-MoS2 heterojunction in FMC can stabilize MoS2 particles on the surface of ceramsite granules, promote the separation of electron/hole pairs, accelerate charge transfer, therefore enhancing piezocatalytic performance. The electron spin resonance analysis and free radical quenching tests show that •OH was the dominant oxidative radical responsible for PFAS degradation. The count of bacteria and the bacterial community structure in the treated soil can be basically restored to the initial states after 30 days of incubation under nutrient stimulation. Overall, this study not only provides a deep insight on soil remediation process, but also offers an efficient and reliable technique for simultaneous decontamination of organic and metal pollutants in soil.

Heavy metal pollution in agricultural soils from surrounding industries with low emissions: Assessing contamination levels and sources

The potential for heavy metal (HM) pollution in agricultural soils adjacent to industries with elevated HM emissions has long been recognized. However, industries with relatively lower levels of HM emissions, such as alumina smelting and glass production, may still contribute to the pollution of surrounding agricultural soils through continuous, albeit low-level, emissions. Despite this, this issue has not garnered adequate attention thus far. Therefore, this study aimed to assess the extent of HM pollution in agricultural soils adjacent to an alumina smelting and a glass production factory, identifying contamination levels and potential sources through the analysis of input fluxes, isotope fingerprints, and receptor models. Results showed moderate cadmium (Cd) contamination in surface soil, exceeding standards at a rate of 86.36 %. Further analysis revealed that atmospheric deposition was the primary route for Cd input in both paddy fields (89.20 %) and dryland soils (91.61 %). Additionally, the δ114/110Cd values in surface soils indicated that dust played a role in influencing Cd levels in distant surface soils, while raw materials and slags were identified as primary sources near the factory. Industrial sources were considered the primary contributors of Cd in soil accounting for approximately 73.38 % and 82.67 %, respectively, according to the positive matrix factorization model (PMF) and absolute principal component scores-multiple linear regression model (APCS-MLR). Overall, this study underscores the importance of monitoring HMs from industries with relatively low emissions and provides a scientific basis for effectively managing HMs pollution in agricultural soils, ensuring the preservation of agricultural soil quality.

Temperature-dependent dynamics of electrokinetic conservative and reactive transport in porous media: A model-based analysis

Electrokinetic techniques employ direct current electric fields to enhance the transport of amendments in low permeability porous media and have been demonstrated effective for in situ remediation of both organic contaminants and heavy metals. The application of electric potential gradients give rise to coupled chemical, hydraulic and electric fluxes, which are at the basis of the main transport mechanisms: electromigration and electroosmosis. Previous research has highlighted the significant impacts of charge interactions and fluid composition, including temperature-dependent properties such as electrolyte conductivity and density, on these transport phenomena. However, current models of electrokinetic applications often assume isothermal conditions and overlook the production of heat resulting from Joule heating. This study provides a detailed model-based investigation, systematically exploring the effects of temperature on electrokinetic conservative and reactive transport in porous media. By incorporating temperature-dependent material properties and progressively investigating the impact of temperature on each transport mechanism, we analyze the effects of temperature variations in both 1D and 2D systems. The study reveals how temperature dynamically influences the physical, chemical and electrostatic processes controlling electrokinetic transport. A temperature increase results in a higher speed of amendments delivery by both electromigration and electroosmosis and increases the kinetics of degradation reactions. The simulations also reveal a feedback mechanism in which higher aqueous conductivity results in increased Joule heating, leading to a faster temperature rise and, subsequently, to higher electrolyte conductivity. Finally, we estimate the electric energy requirements of the system at varying temperatures and show how these changes impact the rate of contaminant removal.