Scaffolds containing growth factors and extracellular matrix induce hepatocyte proliferation and cell migration in normal and regenerating rat liver

Gelatin scaffold ameliorates proliferation & stem cell differentiation into the hepatic like cell and support liver regeneration in partial-hepatectomized mice model

Stem cell-based tissue engineering is an emerging tool for developing functional tissues of choice. To understand pluripotency and hepatic differentiation of mouse embryonic stem cells (mESCs) on a three-dimensional (3D) scaffold, we established an efficient approach for generating hepatocyte-like cells (HLCs) from hepatoblast cells. We developed porous and biodegradable scaffold, which was stimulated with exogenous growth factors and investigated stemness and differentiation capacity of mESCs into HLCs on the scaffoldin-vitro. In animal studies, we had cultured mESCs-derived hepatoblast-like cells on the scaffold and then, transplanted them into the partially hepatectomized C57BL/6 male mice model to evaluate the effect of gelatin scaffold on hepatic regeneration. The 3D culture system allowed maintenance of stemness properties in mESCs. The step-wise induction of mESCs with differentiation factors leads to the formation of HLCs and expressed liver-specific genes, including albumin, hepatocyte nucleic factor 4 alpha, and cytokeratin 18. In addition, cells also expressed Ki67, indicating cells are proliferating. The secretome showed expression of albumin, urea, creatinine, alanine transaminase, and aspartate aminotransferase. However, the volume of the excised liver which aids regeneration has not been studied. Our results indicate that hepatoblast cells on the scaffold implanted in PH mouse indicates that these cells efficiently differentiate into HLCs and cholangiocytes, forming hepatic lobules with central and portal veins, and bile duct-like structures with neovascularization. The gelatin scaffold provides an efficient microenvironment for liver differentiation and regeneration bothin-vitroandin-vivo. These hepatoblasts cells would be a valuable source for 3D liver tissue engineering/transplantation in liver diseases.

Engineered Fibrous NiTi Scaffolds with Cultured Hepatocytes for Liver Regeneration in Rats

At present, the use of alternative systems to replenish the lost functions of hepatic metabolism and partial replacement of liver organ failure is relevant, due to an increase in the incidence of various liver disorders, insufficiency, and cost of organs for transplantation, as well as the high cost of using the artificial liver systems. The development of low-cost intracorporeal systems for maintaining hepatic metabolism using tissue engineering, as a bridge before liver transplantation or completely replacing liver function, deserves special attention. In vivo applications of intracorporeal fibrous nickel-titanium scaffolds (FNTSs) with cultured hepatocytes are described. Hepatocytes cultured in FNTSs are superior to their injections in terms of liver function, survival time, and recovery in a CCl₄-induced cirrhosis rats' model. 232 animals were divided into 5 groups: control, CCl₄-induced cirrhosis, CCl₄-induced cirrhosis followed by implantation of cell-free FNTSs (sham surgery), CCl₄-induced cirrhosis followed by infusion of hepatocytes (2 mL, 10⁷ cells/mL), and CCl₄-induced cirrhosis followed by FNTS implantation with hepatocytes. Restoration of hepatocyte function in the FNTS implantation with the hepatocytes group was accompanied by a significant decrease in the level of aspartate aminotransferase (AsAT) in blood serum compared to the cirrhosis group. A significant decrease in the level of AsAT was noted after 15 days in the infused hepatocytes group. However, on the 30th day, the AsAT level increased and was close to the cirrhosis group due to the short-term effect after the introduction of hepatocytes without a scaffold. The changes in alanine aminotransferase (AlAT), alkaline phosphatase (AlP), total and direct bilirubin, serum protein, triacylglycerol, lactate, albumin, and lipoproteins were similar to those in AsAT. The survival time of animals was significantly longer in the FNTS implantation with hepatocytes group. The obtained results showed the scaffolds' ability to support hepatocellular metabolism. The development of hepatocytes in FNTS was studied in vivo using 12 animals using scanning electron microscopy. Hepatocytes demonstrated good adhesion to the scaffold wireframe and survival in allogeneic conditions. Mature tissue, including cellular and fibrous, filled the scaffold space by 98% in 28 days. The study shows the extent to which an implantable "auxiliary liver" compensates for the lack of liver function without replacement in rats.

Understanding the Unique Microenvironment in the Aging Liver

In the past decades, many studies have focused on aging because of our pursuit of longevity. With lifespans extended, the regenerative capacity of the liver gradually declines due to the existence of aging. This is partially due to the unique microenvironment in the aged liver, which affects a series of physiological processes. In this review, we summarize the related researches in the last decade and try to highlight the aging-related alterations in the aged liver.

Fibrosis and hepatic regeneration mechanism

Liver cirrhosis is the final stage of continuous hepatic inflammatory activity derived by viral, metabolic or autoimmune origin. In the last years, cirrhosis was considered a unique and static condition; recently was accepted some patients subgroups with different liver injury degrees that coexist under the same diagnosis, with implications about the natural disease history. The liver growth factor (LGF) is a potent in vivo and in vitro mitogenic agent and an inducer of hepatic regeneration (HR) through the hepatocytes DNA synthesis. The clinical implications of the LGF levels in cirrhosis, are not clear and even with having a fundamental role in the liver regeneration processes, the studies suggest that it could be a cirrhosis severity marker, in acute liver failure and in chronic hepatitis. Its role as predictor of mortality in fulminant hepatic insufficiency patients has been suggested. HR is one of the most enigmatic and fascinating biological phenomena. The rapid volume and liver function restoration after a major hepatectomy (>70%) or severe hepatocellular damage and its strict regulation of tissue damage response after the cessation, is an exclusive property of the liver. HR is the clinical applications fundament, such as extensive hepatic resections (>70% of the liver parenchyma), segmental transplantation or living donor transplantation, sequential hepatectomies, isolated portal embolization or associated with in situ hepatic transection, temporary artificial support in acute liver failure and the possible cell therapy clinical applications.

Local dual delivery therapeutic strategies: Using biomaterials for advanced bone tissue regeneration

Bone development is a complex process involving a vast number of growth factors and chemical substances. These factors include transforming growth factor-beta, platelet-derived growth factor, insulin-like growth factor, and most importantly, the bone morphogenetic protein, which exhibits excellent therapeutic value in bone repair. However, the spatial-temporal relationship in the expression of these factors during bone formation makes the bone repair a more complicated process to address. Thus, using a single therapeutic agent to address bone formation does not seem to provide a clinically effective option. Conversely, a dual delivery approach facilitating the co-delivery of agents has proved to be a dynamic alternative since such a strategy can provide more efficient spatial-temporal action. Such delivery systems can smartly target more than one pathway or differentiation lineage and thus offer more efficient bone regeneration. This review discusses various dual delivery strategies reported in the literature employed to achieve improved bone regeneration. These include concurrent use of different therapeutic agents (including growth factors and drugs), enhancing bone formation and cell recruitment, and improving the efficiency of bone healing.

Functional Recellularization of Acellular Rat Liver Scaffold by Induced Pluripotent Stem Cells: Molecular Evidence for Wnt/B-Catenin Upregulation

BACKGROUND

Liver transplantation remains the only viable therapy for liver failure but has a severely restricted utility. Here, we aimed to decellularize rat livers to form acellular 3D bio-scaffolds suitable for seeding with induced pluripotent cells (iPSCs) as a tool to investigate the role of Wnt/β-catenin signaling in liver development and generation.

METHODS

Dissected rat livers were randomly divided into three groups: I (control); II (decellularized scaffolds) and III (recellularized scaffolds). Liver decellularization was established via an adapted perfusion procedure and assessed through the measurement of extracellular matrix (ECM) proteins and DNA content. Liver recellularization was assessed through histological examination and measurement of transcript levels of Wnt/β-catenin pathway, hepatogenesis, liver-specific microRNAs and growth factors essential for liver development. Adult rat liver decellularization was confirmed by the maintenance of ECM proteins and persistence of growth factors essential for liver regeneration.

RESULTS

iPSCs seeded rat decellularized livers displayed upregulated transcript expression of Wnt/β-catenin pathway-related, growth factors, and liver specification genes. Further, recellularized livers displayed restored liver-specific functions including albumin secretion and urea synthesis.

CONCLUSION

This establishes proof-of-principle for the generation of three-dimensional liver organ scaffolds as grafts and functional re-establishment.

Fibroblast growth factor 7 releasing particles enhance islet engraftment and improve metabolic control following islet transplantation in mice with diabetes

Transplantation of islets in type 1 diabetes (T1D) is limited by poor islet engraftment into the liver, with two to three donor pancreases required per recipient. We aimed to condition the liver to enhance islet engraftment to improve long-term graft function. Diabetic mice received a non-curative islet transplant (n = 400 islets) via the hepatic portal vein (HPV) with fibroblast growth factor 7-loaded galactosylated poly(DL-lactide-co-glycolic acid) (FGF7-GAL-PLGA) particles; 26-µm diameter particles specifically targeted the liver, promoting hepatocyte proliferation in short-term experiments: in mice receiving 0.1-mg FGF7-GAL-PLGA particles (60-ng FGF7) vs vehicle, cell proliferation was induced specifically in the liver with greater efficacy and specificity than subcutaneous FGF7 (1.25 mg/kg ×2 doses; ~75-µg FGF7). Numbers of engrafted islets and vascularization were greater in liver sections of mice receiving islets and FGF7-GAL-PLGA particles vs mice receiving islets alone, 72 h posttransplant. More mice (six of eight) that received islets and FGF7-GAL-PLGA particles normalized blood glucose concentrations by 30-days posttransplant, versus zero of eight mice receiving islets alone with no evidence of increased proliferation of cells within the liver at this stage and normal liver function tests. This work shows that liver-targeted FGF7-GAL-PLGA particles achieve selective FGF7 delivery to the liver-promoting islet engraftment to help normalize blood glucose levels with a good safety profile.

TMT-based quantitative proteome profiles reveal the memory function of a whole heart decellularized matrix for neural stem cell trans-differentiation into the cardiac lineage

Whole organ or tissue decellularized matrices are a promising scaffold for tissue engineering because they maintain the specific memory of the original organ or tissue. A whole organ or tissue decellularized matrix contains extracellular matrix (ECM) components, and exhibits ultrastructural and mechanical properties, which could significantly regulate the fate of stem cells. To better understand the memory function of whole organ decellularized matrices, we constructed a heart decellularized matrix and seeded cross-embryonic layer stem cells - neural stem cells (NSCs) to repopulate the matrix, engineering cardiac tissue, in which a large number of NSCs differentiated into the neural lineage, but besides that, NSCs showed an obvious tendency of trans-differentiating into cardiac lineage cells. The results demonstrated that the whole heart decellularized microenvironment possesses memory function. To reveal the underlying mechanism, TMT-based quantitative proteomics analysis was used to identify the differently expressed proteins in the whole heart decellularized matrix compared with a brain decellularized matrix. 937 of the proteins changed over 1.5 fold, with 573 of the proteins downregulated and 374 of the proteins upregulated, among which integrin ligands in the ECM serve as key signals in regulating NSC fate. The findings here provide a novel insight into the memory function of tissue-specific microenvironments and pave the way for the therapeutic application of personalized tissues.

Signaling molecules orchestrating liver regenerative medicine

The liver is in charge of more than 500 functions in the human body, which any damage and failure to the liver can significantly compromise human life. Numerous studies are being carried out in regenerative medicine, as a potential driving force, toward alleviating the need for liver donors and fabrication of a 3D-engineered transplantable hepatic tissue. Liver tissue engineering brings three main factors of cells, extracellular matrix (ECM), and signaling molecules together, while each of these three factors tries to mimic the physiological state of the tissue to direct tissue regeneration. Signaling molecules play a crucial role in directing tissue fabrication in liver tissue engineering. When mimicking the natural in vivo process of regeneration, it is tightly associated with three main phases of differentiation, proliferation (progression), and tissue maturation through vascularization while directing each of these phases is highly regulated by the specific signaling molecules. The understanding of how these signaling molecules guide the dynamic behavior of regeneration would be a tool for further tailoring of bioengineered systems to help the liver regeneration with many cellular, molecular, and tissue-level functions. Hence, the signaling molecules come to aid all these phases for further improvements toward the clinical use of liver tissue engineering as the goal.

Intact extracellular matrix component promotes maintenance of liver-specific functions and larger aggregates formation of primary rat hepatocytes

The extracellular matrix (ECM) in a liver-specific extracellular matrix (L-ECM) scaffold facilitates hepatocyte viability and maintains hepatocyte functions in vitro. However, whether an intact composition of ECM is required for an efficient ECM-based substrate design remains to be clarified. In this study, two L-ECM hydrogels, namely L-ECM I and L-ECM II, were prepared by pepsin solubilization at 4 °C and 25 °C, respectively. The solubility at 4 °C was 50% whereas that at 25 °C was 95%, thus indicating well-preserved L-ECM. Analysis confirmed higher ECM protein components (especially collagen) in L-ECM II, along with denser fiber network and larger fiber diameter. L-ECM II gel exhibited high compression strength and suitable viscoelastic properties. Furthermore, hepatocytes in L-ECM II showed higher expression of liver-specific functions in 3D culture and wider spread while maintaining the cell-cell contacts in 2D culture. Therefore, an intact L-ECM is important to realize effective substrates for liver tissue engineering.

Biological Scaffolds for Abdominal Wall Repair: Future in Clinical Application?

Millions of abdominal wall repair procedures are performed each year for primary and incisional hernias both in the European Union and in the United States with extremely high costs. Synthetic meshes approved for augmenting abdominal wall repair provide adequate mechanical support but have significant drawbacks (seroma formation, adhesion to viscera, stiffness of abdominal wall, and infection). Biologic scaffolds (i.e., derived from naturally occurring materials) represent an alternative to synthetic surgical meshes and are less sensitive to infection. Among biologic scaffolds, extracellular matrix scaffolds promote stem/progenitor cell recruitment in models of tissue remodeling and, in the specific application of abdominal wall repair, have enough mechanical strength to support the repair. However, many concerns remain about the use of these scaffolds in the clinic due to their higher cost of production compared with synthetic meshes, despite having the same recurrence rate. The present review aims to highlight the pros and cons of using biologic scaffolds as surgical devices for abdominal wall repair and present possible improvements to widen their use in clinical practice.

Hydrogels for Liver Tissue Engineering

Bioengineered livers are promising in vitro models for drug testing, toxicological studies, and as disease models, and might in the future be an alternative for donor organs to treat end-stage liver diseases. Liver tissue engineering (LTE) aims to construct liver models that are physiologically relevant. To make bioengineered livers, the two most important ingredients are hepatic cells and supportive materials such as hydrogels. In the past decades, dozens of hydrogels have been developed to act as supportive materials, and some have been used for in vitro models and formed functional liver constructs. However, currently none of the used hydrogels are suitable for in vivo transplantation. Here, the histology of the human liver and its relationship with LTE is introduced. After that, significant characteristics of hydrogels are described focusing on LTE. Then, both natural and synthetic materials utilized in hydrogels for LTE are reviewed individually. Finally, a conclusion is drawn on a comparison of the different hydrogels and their characteristics and ideal hydrogels are proposed to promote LTE.

Directing the growth and alignment of biliary epithelium within extracellular matrix hydrogels

Three-dimensional (3D) printing of decellularized extracellular matrix (dECM) hydrogels is a promising technique for regenerative engineering. 3D-printing enables the reproducible and precise patterning of multiple cells and biomaterials in 3D, while dECM has high organ-specific bioactivity. However, dECM hydrogels often display poor printability on their own and necessitate additives or support materials to enable true 3D structures. In this study, we used a sacrificial material, 3D-printed Pluronic F-127, to serve as a platform into which dECM hydrogel can be incorporated to create specifically designed structures made entirely up of dECM. The effects of 3D dECM are studied in the context of engineering the intrahepatic biliary tree, an often-understudied topic in liver tissue engineering. Encapsulating biliary epithelial cells (cholangiocytes) within liver dECM has been shown to lead to the formation of complex biliary trees in vitro. By varying several aspects of the dECM structures' geometry, such as width and angle, we show that we can guide the directional formation of biliary trees. This is confirmed by computational 3D image analysis of duct alignment. This system also enables fabrication of a true multi-layer dECM structure and the formation of 3D biliary trees into which other cell types can be seeded. For example, we show that hepatocyte spheroids can be easily incorporated within this system, and that the seeding sequence influences the resulting structures after seven days in culture. STATEMENT OF SIGNIFICANCE: The field of liver tissue engineering has progressed significantly within the past several years, however engineering the intrahepatic biliary tree has remained a significant challenge. In this study, we utilize the inherent bioactivity of decellularized extracellular matrix (dECM) hydrogels and 3D-printing of a sacrificial biomaterial to create spatially defined, 3D biliary trees. The creation of patterned, 3D dECM hydrogels in the past has only been possible with additives to the gel that may stifle its bioactivity, or with rigid and permanent support structures that may present issues upon implantation. Additionally, the biological effect of 3D spatially patterned liver dECM has not been demonstrated independent of the effects of dECM bioactivity alone. This study demonstrates that sacrificial materials can be used to create pure, multi-layer dECM structures, and that strut width and angle can be changed to influence the formation and alignment of biliary trees encapsulated within. Furthermore, this strategy allows co-culture of other cells such as hepatocytes. We demonstrate that not only does this system show promise for tissue engineering the intrahepatic biliary tree, but it also aids in the study of duct formation and cell-cell interactions.

Utility of extracellular matrix powders in tissue engineering

Extracellular matrix (ECM) materials have had remarkable success as scaffolds in tissue engineering (TE) and as therapies for tissue injury whereby the ECM microenvironment promotes constructive remodeling and tissue regeneration. ECM powder and solubilized derivatives thereof have novel applications in TE and RM afforded by the capacity of these constructs to be dynamically modulated. The powder form allows for effective incorporation and penetration of reagents; hence, ECM powder is an efficacious platform for 3D cell culture and vehicle for small molecule delivery. ECM powder offers minimally invasive therapy for tissue injury and successfully treatment for wounds refractory to first-line therapies. Comminution of ECM and fabrication of powder-derived constructs, however, may compromise the biological integrity of the ECM. The current lack of optimized fabrication protocols prevents a more extensive and effective clinical application of ECM powders. Further study on methods of ECM powder fabrication and modification is needed.

Bioinspired liver scaffold design criteria

Maintaining hepatic functional characteristics in-vitro is considered one of the main challenges in engineering liver tissue. As hepatocytes cultured ex-vivo are deprived of their native extracellular matrix (ECM) milieu, developing scaffolds that mimic the biomechanical and physicochemical properties of the native ECM is thought to be a promising approach for successful tissue engineering and regenerative medicine applications. On the basis that the decellularized liver matrix represents the ideal design template for engineering bioinspired hepatic scaffolds, to derive quantitative descriptors of liver ECM architecture, we characterised decellularised liver matrices in terms of their biochemical, viscoelastic and structural features along with porosity, permeability and wettability. Together, these data provide a unique set of quantitative design criteria which can be used to generate guidelines for fabricating biomaterial scaffolds for liver tissue engineering. As proof-of-concept, we investigated hepatic cell response to substrate viscoelasticity. On collagen hydrogels mimicking decellularised liver mechanics, cells showed superior morphology, higher viability and albumin secretion than on stiffer and less viscous substrates. Although scaffold properties are generally inspired by those of native tissues, our results indicate significant differences between the mechano-structural characteristics of untreated and decellularised hepatic tissue. Therefore, we suggest that design rules - such as mechanical properties and swelling behaviour - for engineering biomimetic scaffolds be re-examined through further studies on substrates matching the features of decellularized liver matrices.

Induction of liver proliferation using a polymeric platform in mice

AIMS

Currently, animal models of liver regeneration are based on extensive lesions of the native organ and on cellular approaches using biomaterials to host growth factors and extracellular components to create artificial liver systems. We report a polymeric biological platform, minimally invasive, that induced sequential proliferation of liver parenchyma inside the scaffold in mice.

MAIN METHODS

Porous discs of polyether-polyurethane were surgically placed under the left liver lobe and removed at days 4, 8, 12 and 25 after implantation. No exogenous growth factors or extracellular matrix components were added to the scaffold. Histological analysis of the implants was performed to identify hepatocytes, liver vascular structures and bile ducts in the newly formed tissue. In addition, systemic markers for hepatic function were determined.

KEY FINDINGS

This biohybrid device provided a scaffold that was gradually filled with parenchymal and non-parenchymal liver tissue as detected by histological analysis. At day 4, the pores of the scaffold were filled with inflammatory cells and spindled-shaped like fibroblasts, and extracellular matrix components. At day 8, hepatocytes clusters, central lobular hepatic veins, portal space containing arteries, veins and biliary ducts were detected. By days 12 and 25 a liver-like structure filled 2/3 of the scaffold. Its organization resembled that of a mature liver. Serum concentration of ALT increased three-fold initially after implantation, returning gradually to control levels.

SIGNIFICANCE

The plain synthetic scaffold (without addition of exogenous molecules) placed under the intact left liver lobe exhibits the potential to investigate physiological mechanisms that regulate liver parenchyma proliferation.

Genipin-crosslinked adipose stem cell derived extracellular matrix-nano graphene oxide composite sponge for skin tissue engineering

3D Bioscaffold with relative high mechanical property was developed using rabbit ADSCs.

Mesenchymal stem cells seeded on a human amniotic membrane improve liver regeneration and mouse survival after extended hepatectomy

Liver failure remains the leading cause of post-operative mortality after hepatectomy. This study investigated the effect of treatment with allogenic mesenchymal stem cells (MSCs) on survival and liver regeneration 48 hr and 7 days after 80% hepatectomy in C57Bl/6 mice. To optimize their biodistribution, MSCs were grown on acellular human amniotic membranes (HAM) and applied as a patch on the remnant liver. This approach was compared with MSC infusion and HAM patch alone. Hepatectomized mice without any treatment were used as control group. Survival rate was calculated and biological and histopathological parameters were analysed to monitor liver function and regeneration. MSCs grown on HAM retained their ability to proliferate, to differentiate into osteoblasts and adipocytes and to respond to pro-inflammatory stimuli. Extended hepatectomy (80%) led to liver failure that resulted in death within 72 hr in 76% of mice. MSC infusion showed an early but transitory positive effect on survival. MSC/HAM patches stimulated regeneration and significantly improved survival rate (54% vs. 24% in the control group at 7 days). They also decreased the severity of hepatectomy-induced steatosis, suggesting a modulation of lipid metabolism in hepatocytes. MSCs were still present on HAM at Days 2 and 7 posthepatectomy. In conclusion, engineered tissue constructs that combine MSCs and HAM improve survival and liver regeneration after 80% hepatectomy in mice. These encouraging results pave the way to potential clinical application.

Recent Advances in Decellularization and Recellularization for Tissue-Engineered Liver Grafts

Liver transplantation from deceased or living human donors remains the only proven option for patients with end-stage liver disease. However, the shortage of donor organs is a significant clinical concern that has led to the pursuit of tissue-engineered liver grafts generated from decellularized liver extracellular matrix and functional cells. Investigative efforts on optimizing both liver decellularization and recellularization protocols have been made in recent decades. In the current review, we briefly summarize these advances, including the generation of high-quality liver extracellular matrix scaffolds, evaluation criteria for quality control, modification of matrix for enhanced properties, and reseeding strategies. These efforts to optimize the methods of decellularization and recellularization lay the groundwork towards generating a transplantable, human-sized liver graft for the treatment of patients with severe liver disease.

Extracellular Matrix Bioscaffolds as Immunomodulatory Biomaterials<sup/>

Suppression of the recipient immune response is a common component of tissue and organ transplantation strategies and has also been used as a method of mitigating the inflammatory and scar tissue response to many biomaterials. It is now recognized, however, that long-term functional tissue replacement not only benefits from an intact host immune response but also depends upon such a response. The present article reviews the limitations associated with the traditionally held view of avoiding the immune response, the ability of acellular biologic scaffold materials to modulate the host immune response and promote a functional tissue replacement outcome, and current strategies within the fields of tissue engineering and biomaterials to develop immune-responsive and immunoregulatory biomaterials.

Biomaterials and Culture Technologies for Regenerative Therapy of Liver Tissue

Regenerative approach has emerged to substitute the current extracorporeal technologies for the treatment of diseased and damaged liver tissue. This is based on the use of biomaterials that modulate the responses of hepatic cells through the unique matrix properties tuned to recapitulate regenerative functions. Cells in liver preserve their phenotype or differentiate through the interactions with extracellular matrix molecules. Therefore, the intrinsic properties of the engineered biomaterials, such as stiffness and surface topography, need to be tailored to induce appropriate cellular functions. The matrix physical stimuli can be combined with biochemical cues, such as immobilized functional groups or the delivered actions of signaling molecules. Furthermore, the external modulation of cells, through cocultures with nonparenchymal cells (e.g., endothelial cells) that can signal bioactive molecules, is another promising avenue to regenerate liver tissue. This review disseminates the recent approaches of regenerating liver tissue, with a focus on the development of biomaterials and the related culture technologies.

Fibronectin Extra Domain A Promotes Liver Sinusoid Repair following Hepatectomy

Liver sinusoidal endothelial cells (LSECs) are the main endothelial cells in the liver and are important for maintaining liver homeostasis as well as responding to injury. LSECs express cellular fibronectin containing the alternatively spliced extra domain A (EIIIA-cFN) and increase expression of this isoform after liver injury, although its function is not well understood. Here, we examined the role of EIIIA-cFN in liver regeneration following partial hepatectomy. We carried out two-thirds partial hepatectomies in mice lacking EIIIA-cFN and in their wild type littermates, studied liver endothelial cell adhesion on decellularized, EIIIA-cFN-containing matrices and investigated the role of cellular fibronectins in liver endothelial cell tubulogenesis. We found that liver weight recovery following hepatectomy was significantly delayed and that sinusoidal repair was impaired in EIIIA-cFN null mice, especially females, as was the lipid accumulation typical of the post-hepatectomy liver. In vitro, we found that liver endothelial cells were more adhesive to cell-deposited matrices containing the EIIIA domain and that cellular fibronectin enhanced tubulogenesis and vascular cord formation. The integrin α₉β₁, which specifically binds EIIIA-cFN, promoted tubulogenesis and adhesion of liver endothelial cells to EIIIA-cFN. Our findings identify a role for EIIIA-cFN in liver regeneration and tubulogenesis. We suggest that sinusoidal repair is enhanced by increased LSEC adhesion, which is mediated by EIIIA-cFN.

Adult-Derived Human Liver Stem/Progenitor Cells Infused 3 Days Postsurgery Improve Liver Regeneration in a Mouse Model of Extended Hepatectomy

There is growing evidence that cell therapy constitutes a promising strategy for liver regenerative medicine. In the setting of hepatic cancer treatments, cell therapy could prove a useful therapeutic approach for managing the acute liver failure that occurs following extended hepatectomy. In this study, we examined the influence of delivering adult-derived human liver stem/progenitor cells (ADHLSCs) at two different early time points in an immunodeficient mouse model (Rag2-/-IL2Rγ-/-) that had undergone a 70% hepatectomy procedure. The hepatic mesenchymal cells were intrasplenically infused either immediately after surgery (n = 26) or following a critical 3-day period (n = 26). We evaluated the cells' capacity to engraft at day 1 and day 7 following transplantation by means of human Alu qPCR quantification, along with histological assessment of human albumin and α-smooth muscle actin. In addition, cell proliferation (anti-mouse and human Ki-67 staining) and murine liver weight were measured in order to evaluate liver regeneration. At day 1 posttransplantation, the ratio of human to mouse cells was similar in both groups, whereas 1 week posttransplantation this ratio was significantly improved (p < 0.016) in mice receiving ADHLSC injection at day 3 posthepatectomy (1.7%), compared to those injected at the time of surgery (1%). On the basis of liver weight, mouse liver regeneration was more extensive 1 week posttransplantation in mice transplanted with ADHLSCs (+65.3%) compared to that of mice from the sham vehicle group (+42.7%). In conclusion, infusing ADHLSCs 3 days after extensive hepatectomy improves the cell engraftment and murine hepatic tissue regeneration, thereby confirming that ADHLSCs could be a promising cell source for liver cell therapy and hepatic tissue repair.

Generation of a Scaffold-Free Three-Dimensional Liver Tissue via a Rapid Cell-to-Cell Click Assembly Process

There has been tremendous interest in constructing in vitro liver organ models for a range of fundamental studies of cell signaling, metabolism, and infectious diseases, and as a commercial system to evaluate therapeutic drug discovery prioritization and toxicity. Although there has been progress toward studying two-dimensional hepatic function in vitro, there remain challenging obstacles to generate rapid and efficient scaffold-free three-dimensional multiple cell line coculture tissue models of liver. Herein, we develop and employ a strategy to induce specific and stable cell-cell contacts among multiple hepatic cell lines to generate 3D tissues through cell-surface engineering based on liposome delivery and fusion to display bio-orthogonal functional groups from cell membranes. We generate, for the first time, a three cell line coculture 3D liver tissue model by assembling hepatocytes, hepatic endothelial cells, and hepatic stellate cells via a rapid intercell click ligation process. We compare and analyze the function of the superior 3D liver tissue chips with 2D coculture monolayer by assessing mitochondrial metabolic activity and evaluating drug toxicity.

Advancing biomaterials of human origin for tissue engineering

Biomaterials have played an increasingly prominent role in the success of biomedical devices and in the development of tissue engineering, which seeks to unlock the regenerative potential innate to human tissues/organs in a state of deterioration and to restore or reestablish normal bodily function. Advances in our understanding of regenerative biomaterials and their roles in new tissue formation can potentially open a new frontier in the fast-growing field of regenerative medicine. Taking inspiration from the role and multi-component construction of native extracellular matrices (ECMs) for cell accommodation, the synthetic biomaterials produced today routinely incorporate biologically active components to define an artificial in vivo milieu with complex and dynamic interactions that foster and regulate stem cells, similar to the events occurring in a natural cellular microenvironment. The range and degree of biomaterial sophistication have also dramatically increased as more knowledge has accumulated through materials science, matrix biology and tissue engineering. However, achieving clinical translation and commercial success requires regenerative biomaterials to be not only efficacious and safe but also cost-effective and convenient for use and production. Utilizing biomaterials of human origin as building blocks for therapeutic purposes has provided a facilitated approach that closely mimics the critical aspects of natural tissue with regard to its physical and chemical properties for the orchestration of wound healing and tissue regeneration. In addition to directly using tissue transfers and transplants for repair, new applications of human-derived biomaterials are now focusing on the use of naturally occurring biomacromolecules, decellularized ECM scaffolds and autologous preparations rich in growth factors/non-expanded stem cells to either target acceleration/magnification of the body's own repair capacity or use nature's paradigms to create new tissues for restoration. In particular, there is increasing interest in separating ECMs into simplified functional domains and/or biopolymeric assemblies so that these components/constituents can be discretely exploited and manipulated for the production of bioscaffolds and new biomimetic biomaterials. Here, following an overview of tissue auto-/allo-transplantation, we discuss the recent trends and advances as well as the challenges and future directions in the evolution and application of human-derived biomaterials for reconstructive surgery and tissue engineering. In particular, we focus on an exploration of the structural, mechanical, biochemical and biological information present in native human tissue for bioengineering applications and to provide inspiration for the design of future biomaterials.

Vascular patterning sets the stage for macro and micro hepatic architecture

Background The liver is a complex organ with a variety of tissue components that require a precise architecture for optimal function of metabolic and detoxification processes. As a result of the delicate orchestration required between the various hepatic tissues, it is not surprising that impairment of hepatic function can be caused by a variety of factors leading to chronic liver disease. Results Despite the growing rate of chronic liver disease, there are currently few effective treatment options besides orthotopic liver transplantation. Better therapeutic options reside in the potential for genetic and cellular therapies that promote progenitor cell activation aiding de novo epithelial and vascular regeneration, cell replacement, or population of bioartificial hepatic devices. In order to explore this area of new therapeutic potential, it is crucial to understand the factors that promote hepatic function through regulating cell identities and tissue architecture. Conclusions In this commentary, we review the signals regulating liver cell fates during development and regeneration and highlight the importance of patterning the hepatic vascular systems to set the groundwork for the macro and micro hepatic architecture of the epithelium.

Whole-organ tissue engineering: decellularization and recellularization of three-dimensional matrix liver scaffolds

To report the results of whole liver decellularization by two different methods. To present the results of grafting rat and sheep decellularized liver matrix (DLM) into the normal rat liver and compare natural cell seeding process in homo/xenograft of DLM. To compare the results of in vitro whole liver recellularization with rats' neonatal green fluorescent protein (GFP)-positive hepatic cells with outcomes of in vivo recellularization process. Whole liver of 8 rats and 4 sheep were resected and cannulated via the hepatic vein and perfused with sodium dodecyl sulfate (SDS) or Triton + SDS. Several examinations were performed to compare the efficacy of these two decellularization procedures. In vivo recellularization of sheep and rat DLMs was performed following transplantation of multiple pieces of both scaffolds in the subhepatic area of four rats. To compare the efficacy of different scaffolds in autologous cell seeding, biopsies of homograft and xenograft were assessed 8 weeks postoperatively. Whole DLMs of 4 rats were also recellularized in vitro by perfusion of rat's fetal GFP-positive hepatic cells with pulsatile bioreactor. Histological evaluation and enzymatic assay were performed for both in vivo and in vitro recellularized samples. The results of this study demonstrated that the triton method was a promising decellularization approach for preserving the three-dimensional structure of liver. In vitro recellularized DLMs were more similar to natural ones compared with in vivo recellularized livers. However, homografts showed better characteristics with more organized structure compared with xenografts. In vitro recellularization of liver scaffolds with autologous cells represents an attractive prospective for regeneration of liver as one of the most compound organs. In vivo cell seeding on the scaffold of the same species may have more satisfactory outcomes when compared with the results of xenotransplantation. This study theoretically may pave the road for in situ liver regeneration probably by implantation of homologous DLM or in vitro recellularized scaffolds into the diseased host liver.

Will regenerative medicine replace transplantation?

Recent groundbreaking advances in organ bioengineering and regeneration have provided evidence that regenerative medicine holds promise to dramatically improve the approach to organ transplantation. The two fields, however, share a common heritage. Alexis Carrel can be considered the father of both regenerative medicine and organ transplantation, and it is now clear that his legacy is equally applicable for the present and future generations of transplant and regenerative medicine investigators. In this review, we will briefly illustrate the interplay that should be established between these two complementary disciplines of health sciences. Although regenerative medicine has shown to the transplant field its potential, transplantation is destined to align with regenerative medicine and foster further progress probably more than either discipline alone. Organ bioengineering and regeneration technologies hold the promise to meet at the same time the two most urgent needs in organ transplantation, namely, the identification of a new, potentially inexhaustible source of organs and immunosuppression-free transplantation of tissues and organs.

Effect of static seeding methods on the distribution of fibroblasts within human acellular dermis

INTRODUCTION

When developing tissue engineered solutions for existing clinical problems, cell seeding strategies should be optimized for desired cell distribution within matrices. The purpose of this investigation was to compare the effects of different static cell seeding methods and subsequent static cell culture for up to 12 days with regard to seeding efficiency and resulting cellular distribution in acellular dermis.

MATERIALS AND METHODS

The seeding methods tested were surface seeding of both unmodified and mechanically incised dermis, syringe injection of cell suspension, application of low-pressure and use of an ultrasonic bath to remove trapped air. The effect of "platelet derived growth factor" (PDGF) on surface seeding and low pressure seeding was also investigated. Scaffolds were incubated for up to 12 days and were histologically examined at days 0, 4, 8 and 12 for cell distribution and infiltration depth. The metabolic activity of the cells was quantified with the MTT assay at the same time points.

RESULTS

The 50 ml syringe degassing procedure produced the best results in terms of seeding efficiency, cell distribution, penetration depth and metabolic activity within the measured time frame. The injection and ultrasonic bath methods produced the lowest seeding efficiency. The incision method and the 20 ml syringe degassing procedure produced results that were not significantly different to those obtained with a standard static seeding method.

CONCLUSION

We postulate that air in the pores of the human acellular dermis (hAD) hinders cell seeding and subsequent infiltration. We achieved the highest seeding efficiency, homogeneity, infiltration depth and cell growth within the 12 day static culturing period by degassing the dermis using low- pressure created by a 50 ml syringe. We conclude that this method to eliminate trapped air provides the most effective method to seed cells and to allow cell proliferation in a natural scaffold.

Liver bioengineering: Current status and future perspectives

The present review aims to illustrate the strategies that are being implemented to regenerate or bioengineer livers for clinical purposes. There are two general pathways to liver bioengineering and regeneration. The first consists of creating a supporting scaffold, either synthetically or by decellularization of human or animal organs, and seeding cells on the scaffold, where they will mature either in bioreactors or in vivo. This strategy seems to offer the quickest route to clinical translation, as demonstrated by the development of liver organoids from rodent livers which were repopulated with organ specific cells of animal and/or human origin. Liver bioengineering has potential for transplantation and for toxicity testing during preclinical drug development. The second possibility is to induce liver regeneration of dead or resected tissue by manipulating cell pathways. In fact, it is well known that the liver has peculiar regenerative potential which allows hepatocyte hyperplasia after amputation of liver volume. Infusion of autologous bone marrow cells, which aids in liver regeneration, into patients was shown to be safe and to improve their clinical condition, but the specific cells responsible for liver regeneration have not yet been determined and the underlying mechanisms remain largely unknown. A complete understanding of the cell pathways and dynamics and of the functioning of liver stem cell niche is necessary for the clinical translation of regenerative medicine strategies. As well, it will be crucial to elucidate the mechanisms through which cells interact with the extracellular matrix, and how this latter supports and drives cell fate.

Delivery of growth factors for tissue regeneration and wound healing

Growth factors are soluble secreted proteins capable of affecting a variety of cellular processes important for tissue regeneration. Consequently, the self-healing capacity of patients can be augmented by artificially enhancing one or more processes important for healing through the application of growth factors. However, their application in clinics remains limited due to lack of robust delivery systems and biomaterial carriers. Interestingly, all clinically approved therapies involving growth factors utilize some sort of a biomaterial carrier for growth factor delivery. This suggests that biomaterial delivery systems are extremely important for successful usage of growth factors in regenerative medicine. This review outlines the role of growth factors in tissue regeneration, and their application in both pre-clinical animal models of regeneration and clinical trials is discussed. Additionally, current status of biomaterial substrates and sophisticated delivery systems such as nanoparticles for delivery of exogenous growth factors and peptides in humans are reviewed. Finally, issues and possible future research directions for growth factor therapy in regenerative medicine are discussed.

Human-scale whole-organ bioengineering for liver transplantation: a regenerative medicine approach

At this time, the only definitive treatment of hepatic failure is liver transplantation. However, transplantation has been limited by the severely limited supply of human donor livers. Alternatively, a regenerative medicine approach has been recently proposed in rodents that describe the production of three-dimensional whole-organ scaffolds for assembly of engineered complete organs. In the present study, we describe the decellularization of porcine livers to generate liver constructs at a scale that can be clinically relevant. Adult ischemic porcine livers were successfully decellularized using a customized perfusion protocol, the decellularization process preserved the ultrastructural extracellular matrix components, functional characteristics of the native microvascular and the bile drainage network of the liver, and growth factors necessary for angiogenesis and liver regeneration. Furthermore, isolated hepatocytes engrafted and reorganized in the porcine decellularized livers using a human-sized organ culture system. These results provide proof-of-principle for the generation of a human-sized, three-dimensional organ scaffold as a potential structure for human liver grafts reconstruction for transplantation to treat liver disease.

Emerging roles for biomaterials in the treatment of liver disease

This review explores potential roles for biomaterials in the field of liver surgery and hepatology. The studies reviewed are presented in three sections. The first section discusses liver regeneration and strategies to modulate it. The second section outlines the pathophysiology of liver inflammation and fibrosis and highlights novel therapeutic targets. The final section summarises the current challenges in liver surgery and discusses how biomaterials may be used to address these challenges and focuses on early translational applications for biomaterials for drug delivery and liver surgery.

Role of biomaterials, therapeutic molecules and cells for hepatic tissue engineering

Current liver transplantation strategies face severe shortcomings owing to scarcity of donors, immunogenicity, prohibitive costs and poor survival rates. Due to the lengthy list of patients requiring transplant, high mortality rates are observed during the endless waiting period. Tissue engineering could be an alternative strategy to regenerate the damaged liver and improve the survival and quality of life of the patient. The development of an ideal scaffold for liver tissue engineering depends on the nature of the scaffold, its architecture and the presence of growth factors and recognition motifs. Biomimetic scaffolds can simulate the native extracellular matrix for the culture of hepatocytes to enable them to exhibit their functionality both in vitro and in vivo. This review highlights the physiology and pathophysiology of liver, the current treatment strategies, use of various scaffolds, incorporation of adhesion motifs, growth factors and stem cells that can stabilize and maintain hepatocyte cultures for a long period.

Bioengineering in organ transplantation: targeting the liver

About 27,000 deaths are registered annually in the United States due to liver disease. At this time, the only definitive treatment of hepatic failure is orthotopic transplantation. However, there is a critical shortage of organs with the total waiting list for all organs currently at 100,000 requests. The number is increasing by 5% every year. Given that only organs in pristine condition are transplantable and that the hidden demand for organs as an anti-aging solution will be many times the current figures, orthotopic transplantation will always remain a limited pool. The increasing donor organ shortage requires consideration of alternative emerging technologies. Regenerative medicine may offer novel strategies to treat patients with end-stage organ failure. The ultimate aim of cell transplantation, tissue engineering, and stem cells is to regenerate tissues and organs. With the development of whole organ decellularization methods, the equation of organ shortage may dramatically change in the near future. Decellularized organs provide the ideal transplantable scaffold with all the necessary microstructure and extracellular cues for cell attachment, differentiation, vascularization, and function. New techniques to re-engineer organs may have major implications for the fields of drug discovery, regeneration biology, and ultimately organ transplantation. In this review we have provided an overview of complementary approaches to study and enhance the success of organ repopulation strategies creating new grafts/organs for transplantation.

Fabrication of three-dimensional scaffolds using precision extrusion deposition with an assisted cooling device

In the field of biofabrication, tissue engineering and regenerative medicine, there are many methodologies to fabricate a building block (scaffold) which is unique to the target tissue or organ that facilitates cell growth, attachment, proliferation and/or differentiation. Currently, there are many techniques that fabricate three-dimensional scaffolds; however, there are advantages, limitations and specific tissue focuses of each fabrication technique. The focus of this initiative is to utilize an existing technique and expand the library of biomaterials which can be utilized to fabricate three-dimensional scaffolds rather than focusing on a new fabrication technique. An expanded library of biomaterials will enable the precision extrusion deposition (PED) device to construct three-dimensional scaffolds with enhanced biological, chemical and mechanical cues that will benefit tissue generation. Computer-aided motion and extrusion drive the PED to precisely fabricate micro-scaled scaffolds with biologically inspired, porosity, interconnectivity and internal and external architectures. The high printing resolution, precision and controllability of the PED allow for closer mimicry of tissues and organs. The PED expands its library of biopolymers by introducing an assisting cooling (AC) device which increases the working extrusion temperature from 120 to 250 °C. This paper investigates the PED with the integrated AC's capabilities to fabricate three-dimensional scaffolds that support cell growth, attachment and proliferation. Studies carried out in this paper utilized a biopolymer whose melting point is established to be 200 °C. This polymer was selected to illustrate the newly developed device's ability to fabricate three-dimensional scaffolds from a new library of biopolymers. Three-dimensional scaffolds fabricated with the integrated AC device should illustrate structural integrity and ability to support cell attachment and proliferation.

Prediction, prevention and management of postresection liver failure

Background

Postresection liver failure (PLF) is the major cause of death following liver resection. However, there is no unified definition, the pathophysiology is understood poorly and there are few controlled trials to optimize its management. The aim of this review article is to present strategies to predict, prevent and manage PLF.

Methods

The Web of Science, MEDLINE, PubMed, Google Scholar and Cochrane Library databases were searched for studies using the terms ‘liver resection’, ‘partial hepatectomy’, ‘liver dysfunction’ and ‘liver failure’ for relevant studies from the 15 years preceding May 2011. Key papers published more than 15 years ago were included if more recent data were not available. Papers published in languages other than English were excluded.

Results

The incidence of PLF ranges from 0 to 13 per cent. The absence of a unified definition prevents direct comparison between studies. The major risk factors are the extent of resection and the presence of underlying parenchymal disease. Small-for-size syndrome, sepsis and ischaemia–reperfusion injury are key mechanisms in the pathophysiology of PLF. Jaundice is the most sensitive predictor of outcome. An evidence-based approach to the prevention and management of PLF is presented.

Conclusion

PLF is the major cause of morbidity and mortality after liver resection. There is a need for a unified definition and improved strategies to treat it.

Three-dimensional culture of hepatocytes on porcine liver tissue-derived extracellular matrix

There is currently no optimal system to expand and maintain the function of human adult hepatocytes in culture. Recent studies have demonstrated that specific tissue-derived extracellular matrix (ECM) can serve as a culture substrate and that cells tend to proliferate and differentiate best on ECM derived from their tissue of origin. The goal of this study was to investigate whether three-dimensional (3D) ECM derived from porcine liver can facilitate the growth and maintenance of physiological functions of liver cells. Optimized decellularization/oxidation procedures removed up to 93% of the cellular components from porcine liver tissue and preserved key molecular components in the ECM, including collagen-I, -III, and -IV, proteoglycans, glycosaminoglycans, fibronectin, elastin, and laminin. When HepG2 cells or human hepatocytes were seeded onto ECM discs, uniform multi-layer constructs of both cell types were formed. Dynamic culture conditions yielded better cellular infiltration into the ECM discs. Human hepatocytes cultured on ECM discs expressed significantly higher levels of albumin over a 21-day culture period compared to cells cultured in traditional polystyrene cultureware or in a collagen gel "sandwich". The culture of hepatocytes on 3D liver-specific ECM resulted in considerably improved cell growth and maintained cell function; therefore, this system could potentially be used in liver tissue regeneration, drug discovery or toxicology studies.