3D enamel thickness in Neandertal and modern human permanent canines

Finite element analysis of Neanderthal and early Homo sapiens maxillary central incisor

Neanderthal anterior teeth are very large and have a distinctive morphology characterized by robust 'shovel-shaped' crowns. These features are frequently seen as adaptive responses in dissipating heavy mechanical loads resulting from masticatory and non-masticatory activities. Although the long-standing debate surrounding this hypothesis has played a central role in paleoanthropology, is still unclear if Neanderthal anterior teeth can resist high mechanical loads or not. A novel way to answer this question is to use a multidisciplinary approach that considers together tooth architecture, dental wear and jaw movements. The aim of this study is to functionally reposition the teeth of Le Moustier 1 (a Neanderthal adolescent) and Qafzeh 9 (an early Homo sapiens adolescent) derived from wear facet mapping, occlusal fingerprint analysis and physical dental restoration methods. The restored dental arches are then used to perform finite element analysis on the left central maxillary incisor during edge-to-edge occlusion. The results show stress distribution differences between Le Moustier 1 and Qafzeh 9, with the former displaying higher tensile stress in enamel around the lingual fossa but lower concentration of stress in the lingual aspect of the root surface. These results seem to suggest that the presence of labial convexity, lingual tubercle and of a large root surface in Le Moustier 1 incisor helps in dissipating mechanical stress. The absence of these dental features in Qafzeh 9 is compensated by the presence of a thicker enamel, which helps in reducing the stress in the tooth crown.

Evaluation of enamel thickness of mandibular incisors

OBJECTIVE

To measure enamel thickness at the proximal surfaces of the mandibular incisors, using micro-computed tomography (micro-CT) scans.

MATERIAL AND METHODS

Forty-one single-rooted mandibular incisors were selected and analyzed according to anatomical characteristics, to form three groups: Group 1 - central incisors (n = 18); Group 2 - right lateral incisors (n = 10); and Group 3 - left lateral incisors (n = 13). First, enamel thickness at the proximal contact areas of the mandibular incisors was measured. Second, the mesial and distal surfaces of the lateral incisors were compared. Finally, the relationship between the tooth width and the mean enamel thickness was determined. Each tooth was scanned with a micro-CT scanner, and the image was processed with SCANCO micro-CT onboard analysis software.

RESULTS

There were no statistically significant differences in mean enamel thickness between the mesial and distal surfaces for each lateral incisor, or between contralateral lateral incisors. In all surfaces analyzed, the upper zones had statistically significantly thinner enamel (0.52 ± 0.10 mm) when compared to the middle and lower zones (0.60 ± 0.08 mm and 0.59 ± 0.08 mm, respectively). There was no correlation (r =0.07) between enamel thickness of the mandibular incisor and the tooth width.

CONCLUSIONS

The enamel thickness of the mandibular incisors is similar on the mesial and distal surfaces, with the thinnest layer located at the upper zone.

Synchrotron X-ray Studies of the Structural and Functional Hierarchies in Mineralised Human Dental Enamel: A State-of-the-Art Review

Hard dental tissues possess a complex hierarchical structure that is particularly evident in enamel, the most mineralised substance in the human body. Its complex and interlinked organisation at the Ångstrom (crystal lattice), nano-, micro-, and macro-scales is the result of evolutionary optimisation for mechanical and functional performance: hardness and stiffness, fracture toughness, thermal, and chemical resistance. Understanding the physical-chemical-structural relationships at each scale requires the application of appropriately sensitive and resolving probes. Synchrotron X-ray techniques offer the possibility to progress significantly beyond the capabilities of conventional laboratory instruments, i.e., X-ray diffractometers, and electron and atomic force microscopes. The last few decades have witnessed the accumulation of results obtained from X-ray scattering (diffraction), spectroscopy (including polarisation analysis), and imaging (including ptychography and tomography). The current article presents a multi-disciplinary review of nearly 40 years of discoveries and advancements, primarily pertaining to the study of enamel and its demineralisation (caries), but also linked to the investigations of other mineralised tissues such as dentine, bone, etc. The modelling approaches informed by these observations are also overviewed. The strategic aim of the present review was to identify and evaluate prospective avenues for analysing dental tissues and developing treatments and prophylaxis for improved dental health.

Comparing the Boxgrove and Atapuerca (Sima de los Huesos) human fossils: Do they represent distinct paleodemes?

The early Middle Pleistocene human material from Boxgrove (West Sussex, UK) consists of a partial left tibia and two lower incisors from a separate adult individual. These remains derive from deposits assigned to the MIS 13 interglacial at about 480 ka and have been referred to as Homo cf. heidelbergensis. The much larger skeletal sample from the Sima de los Huesos (Atapuerca, Spain) is dated to the succeeding MIS 12, at about 430 ka. This fossil material has previously been assigned to Homo heidelbergensis but is now placed within the Neanderthal clade. Because of the scarcity of human remains from the Middle Pleistocene and their morphological variability, this study assessed whether the Boxgrove specimens fit within the morphological variability of the homogeneous Sima de los Huesos population. Based on morphometric analyses performed against 22 lower incisors from Sima de los Huesos and published material, the data from the Boxgrove incisors place them comfortably within the range of Sima de los Huesos. Both assemblages present robust incisors distinct from the overall small recent Homo sapiens incisors, and Boxgrove also aligns closely with Homo neanderthalensis and some other European Middle Pleistocene hominins. Following morphological and cross-sectional analyses of the Boxgrove tibia compared to seven adult Sima de los Huesos specimens and a set of comparative tibiae, Boxgrove is shown to be similar to Sima de los Huesos and Neanderthals in having thick cortices and bone walls, but in contrast resembles modern humans in having a straight anterior tibial crest and a suggestion of a lateral concavity. Based on the patterns observed, there is no justification for assigning the Boxgrove and Sima de los Huesos incisors to distinct paleodemes, but the tibial data show greater contrasts and suggest that all three of these samples are unlikely to represent the same paleodeme.

Similarities and differences in the dental tissue proportions of the deciduous and permanent canines of Early and Middle Pleistocene human populations

The two- and three-dimensional assessment of dental tissues has become routine in human taxonomic studies throughout the years. Nonetheless, most of our knowledge of the variability of the enamel and dentine dimensions of the human evolutionary lineage comes from the study of permanent dentition, and particularly from molars. This leads to a biased view of the variability of these features. Due to their early formation and rapid development, the deciduous teeth allow more simplified inferences regarding the processes involved in the dental tissue development of each group. Therefore, their study could be very valuable in dental palaeohistology. In this research, we have explored the dental tissue proportions of the deciduous canines belonging to some human samples of the Early and Middle Pleistocene. The purpose of this was to discuss the meaning of the similarities and differences observed in their histological pattern, as well as to evaluate the degree of covariance with that observed in the permanent dentition of these populations. Our results show that, although there are some similarities in the dental tissue proportions between the deciduous and permanent canines of the study samples, the two dental classes do not provide a similar or comparable pictures of the dental tissue pattern present in the dentition of fossil hominins. Future works on the dental tissue patterns of the anterior and posterior dentition, including deciduous teeth, of fossil samples, may help to shed light on this hypothesis.

Detection of Dental Caries' and Dermatoglyphics' Association with Relative Enamel Thickness Using CBCT Images in Saudi Subpopulation: A Novel Approach

Background

Dental caries is the localized destruction of dental hard tissues (enamel and dentine). Decayed, Missing, and Filled Teeth (DMFT) index is the most commonly used dental caries index. Thickness of the outermost part of the tooth called the enamel is determined by the rate of deposition of enamel proteins. Relative enamel thickness (RET) gives a measure of enamel thickness with respect to dentine. Dental caries is influenced by a genetically determined factor called dermatoglyphics (DG). As the genes responsible for RET and DG lie on the same chromosome and develop during the same time of intrauterine life, it is biologically plausible to correlate RET and DG.

Aims

This study consists of two primary aims: (1) to assess RET using cone beam computed tomography images and correlate it with caries and (2) to correlate RET with DG.

Materials and Methods

148 dental subjects were assessed for DMFT caries score and were categorized as Group 1 with DMFT = 0 and Group 2 with DMFT ≥ 1. Following this, their DG pattern was recorded digitally. The CBCT images of these subjects were assessed for RET, and the data were analyzed statistically.

Results

Mean RET in our sample population is 18.45 (SD 3.79) while mean DMFT is 5.34 (SD 5.13). Mean RET in Group 1 subjects was 19.82 (SD 4.05) while that in the Group 2 was 17.68 (SD 3.43). RET and DMFT showed a statistically significant negative correlation (p = 0.007). The “Single Loop” DG characteristic showed a statistically significant difference between males and females (p = 0.031). The “Simple Arch” type of DG was positively correlated with RET.

Conclusion

This is the first in vivo study to assess RET using CBCT images and correlate with DMFT and DG. RET is inversely related to DMFT while directly proportional to the “Simple arch” DG pattern. Males and females differed in their “Single Loop” DG characteristic.

A robust alternative to assessing three-dimensional relative enamel thickness for the use in taxonomic assessment

OBJECTIVE

Three-dimensional relative enamel thickness (3DRET) is important for assessing hypotheses about taxonomy, phylogeny, and dietary reconstruction for primates. However, its weaknesses have not been thoroughly investigated. Here, we analyze its weaknesses and propose an index aiming at better taxonomic discrimination.

MATERIALS AND METHODS

The dimensionless 3D index, ratio of enamel-thickness to dentine-thickness (3DRED), which is defined as the cubic root of the ratio of 3D average enamel thickness (3DAET) to 3D average dentine thickness (3DADT), is proposed here. To compare 3DRET and 3DRED and their sensitivity to voxel size, a fossil orangutan molar was scanned 14 times with different resolutions ranging from 10 to 50 μm. Enamel thickness analysis was carried out for each resultant digital model. In addition, enamel thickness measurements of 179 mandibular permanent molars (eight genera) were analyzed, followed by investigating the relationship between 3DRET and 3DAET and between 3DRED and 3DAET.

RESULTS

Regarding sensitivity, 3DRED is more robust than 3DRET. In addition, 3DRET is correlated with 3DAET by linear curve with regression coefficients approximating or larger than 0.8 in most cases, while 3DRED shows less correlation with 3DAET. Furthermore, there are clear separations between different taxa in the bivariate plot of 3DRED against 3DAET, indicative of the taxonomic value of 3DRED.

CONCLUSION

Under certain conditions, 3DRED promises to be a robust and reliable alternative to 3DRET in taxonomic study.

Enamel thickness of maxillary canines evaluated with microcomputed tomography scans

INTRODUCTION

Enameloplasty of maxillary canines is often needed for aesthetic substitution in patients with congenitally missing lateral incisors. The exact enamel thicknesses for the various canine surfaces are unknown because previous studies failed to employ accurate measurement tools to report and compare detailed enamel thicknesses for each surface at various crown heights.

METHODS

Thirty-two extracted maxillary canines were collected and scanned in a microcomputed tomography scanner. The scans were imported into a custom-written MATLAB software (version 9.2; MathWorks, Natick, Mass) and the enamel thickness on the mesial, distal, labial, fossa, cingulum, and incisal edge of each tooth was computed, obtaining the mean value from slices at 0.1 mm intervals. The overall mean enamel thickness for each surface was also calculated, and these values were compared using paired t tests. Incisal wear stage and incisal enamel thickness that was measured were compared using Spearman rank correlation coefficient.

RESULTS

The mean enamel thickness was significantly thinner at the gingival level when compared with the incisal for all surfaces that were analyzed (1-tailed, P <0.001). The mean enamel coverage at the mesial was significantly thinner than the distal when measured gingival to the widest mesiodistal area. The mean enamel coverage of the cingulum was particularly thin and therefore requires extreme care in reshaping it. Incisal edge enamel thickness was highly negatively correlated with the wear stage of the scoring system that was used (1-tailed, P <0.001).

CONCLUSIONS

The enamel coverage of the maxillary canine varies depending on the tooth surface and the incisogingival measurement location.

Crown tissue proportions and enamel thickness distribution in the Middle Pleistocene hominin molars from Sima de los Huesos (SH) population (Atapuerca, Spain)

Dental enamel thickness, topography, growth and development vary among hominins. In Homo, the thickness of dental enamel in most Pleistocene hominins display variations from thick to hyper-thick, while Neanderthals exhibit proportionally thinner enamel. The origin of the thin trait remains unclear. In this context, the Middle Pleistocene human dental assemblage from Atapuerca-Sima de los Huesos (SH) provides a unique opportunity to trace the evolution of enamel thickness in European hominins. In this study, we aim to test the hypothesis if the SH molar sample approximates the Neanderthal condition for enamel thickness and/or distribution. This study includes 626 molars, both original and comparative data. We analysed the molar inner structural organization of the original collections (n = 124), belonging to SH(n = 72) and modern humans from Spanish origin (n = 52). We compared the SH estimates to those of extinct and extant populations of the genus Homo from African, Asian and European origin (estimates extracted from literature n = 502). The comparative sample included maxillary and mandibular molars belonging to H. erectus, East and North African Homo, European Middle Pleistocene Homo, Neanderthals, and fossil and extant H. sapiens. We used high-resolution images to investigate the endostructural configuration of SH molars (tissue proportions, enamel thickness and distribution). The SH molars exhibit on average thick absolute and relative enamel in 2D and 3D estimates, both in the complete crown and the lateral enamel. This primitive condition is shared with the majority of extinct and extant hominin sample, except for Neanderthals and some isolated specimens. On the contrary, the SH molar enamel distribution maps reveal a distribution pattern similar to the Neanderthal signal (with thicker enamel on the lingual cusps and more peripherally distributed), compared to H. antecessor and modern humans. Due to the phylogenetic position of the SH population, the thick condition in molars could represent the persistence of the plesiomorphic condition in this group. Still, more data is needed on other Early and Middle Pleistocene populations to fully understand the evolutionary meaning of this trait.

Sexual dimorphism of the enamel and dentine dimensions of the permanent canines of the Middle Pleistocene hominins from Sima de los Huesos (Burgos, Spain)

Sexual dimorphism is an important component of the total variation seen in populations and plays a key role in taxonomic debates. In this study, microtomographic (microcomputed tomography) techniques were applied to a sample of hominin teeth from the Sima de los Huesos site (Spain). Dental tissue proportions of the permanent canines were assessed to characterize the pattern and degree of sexual dimorphism within this population. In addition, the possible similarities and differences with the Homo neanderthalensis remains from Krapina (Croatia) and with a recent modern human sample were evaluated. A combination of classical statistical approaches with more novel techniques allowed us not only to ratify the sex allocation of the individuals previously assigned in the literature but also to estimate the sex of the youngest individuals, which were not assessed in previous studies. Likewise, the sexes of certain extensively worn canines and isolated pieces were estimated. As a result, the sex ratio observed in our dental sample from the Sima de los Huesos population is 5:9 (N_m:N_f). In general terms, both Sima de los Huesos and Krapina dental samples have a degree of sexual dimorphism in their permanent canine tissue proportions that does not surpass that of modern humans. The marked dimorphic root volume of Sima de los Huesos mandibular canines is the exception, which surpasses the modern human mean, although it falls within the 95% confidence interval. Therefore, our results do not support that dental tissue proportions of the European Middle Pleistocene populations were more dimorphic than in modern humans. However, the differences in canine tissue proportions are great enough to allow sex estimation with a high degree of confidence.

The Neanderthal teeth from Marillac (Charente, Southwestern France): Morphology, comparisons and paleobiology

Few European sites have yielded human dental remains safely dated to the end of MIS 4/beginning of MIS 3. One of those sites is Marillac (Southwestern France), a collapsed karstic cave where archeological excavations (1967-1980) conducted by B. Vandermeersch unearthed numerous faunal and human remains, as well as a few Mousterian Quina tools. The Marillac sinkhole was occasionally used by humans to process the carcasses of different prey, but there is no evidence for a residential use of the site, nor have any hearths been found. Rare carnivore bones were also discovered, demonstrating that the sinkhole was seasonally used, not only by Neanderthals, but also by predators across several millennia. The lithostratigraphic units containing the human remains were dated to ∼60 kyr. The fossils consisted of numerous fragments of skulls and jaws, isolated teeth and several post-cranial bones, many of them with traces of perimortem manipulations. For those already published, their morphological characteristics and chronostratigraphic context allowed their attribution to Neanderthals. This paper analyzes sixteen unpublished human teeth (fourteen permanent and two deciduous) by investigating the external morphology and metrical variation with respect to other Neanderthal remains and a sample from modern populations. We also investigate their enamel thickness distribution in 2D and 3D, the enamel-dentine junction morphology (using geometric morphometrics) of one molar and two premolars, the roots and the possible expression of taurodontism, as well as pathologies and developmental defects. The anterior tooth use and paramasticatory activities are also discussed. Morphological and structural alterations were found on several teeth, and interpreted in light of human behavior (tooth-pick) and carnivores' actions (partial digestion). The data are interpreted in the context of the available information for the Eurasian Neanderthals.

Neutron scanning reveals unexpected complexity in the enamel thickness of an herbivorous Jurassic reptile

Eilenodontines are one of the oldest radiation of herbivorous lepidosaurs (snakes, lizards and tuatara) characterized by batteries of wide teeth with thick enamel that bear mammal-like wear facets. Unlike most reptiles, eilenodontines have limited tooth replacement, making dental longevity particularly important to them. We use both X-ray and neutron computed tomography to examine a fossil tooth from the eilenodontine Eilenodon (Late Jurassic, USA). Of the two approaches, neutron tomography was more successful and facilitated measurements of enamel thickness and distribution. We find the enamel thickness to be regionally variable, thin near the cusp tip (0.10 mm) but thicker around the base (0.15–0.30 mm) and notably greater than that of other rhynchocephalians such as the extant Sphenodon (0.08–0.14 mm). The thick enamel in Eilenodon would permit greater loading, extend tooth lifespan and facilitate the establishment of wear facets that have sharp edges for orally processing plant material such as horsetails (Equisetum). The shape of the enamel dentine junction indicates that tooth development in Eilenodon and Sphenodon involved similar folding of the epithelium but different ameloblast activity.

Tooth crown tissue proportions and enamel thickness in Early Pleistocene Homo antecessor molars (Atapuerca, Spain)

Tooth crown tissue proportions and enamel thickness distribution are considered reliable characters for inferring taxonomic identity, phylogenetic relationships, dietary and behavioural adaptations in fossil and extant hominids. While most Pleistocene hominins display variations from thick to hyper-thick enamel, Neanderthals exhibit relatively thinner. However, the chronological and geographical origin for the appearance of this typical Neanderthal condition is still unknown. The European late Early Pleistocene species Homo antecessor (Gran Dolina-TD6 site, Sierra de Atapuerca) represents an opportunity to investigate the appearance of the thin condition in the fossil record. In this study, we aim to test the hypothesis if H. antecessor molars approximates the Neanderthal condition for tissue proportions and enamel thickness. To do so, for the first time we characterised the molar inner structural organization in this Early Pleistocene hominin taxon (n = 17) and compared it to extinct and extant populations of the genus Homo from African, Asian and European origin (n = 355). The comparative sample includes maxillary and mandibular molars belonging to H. erectus, East and North African Homo, European Middle Pleistocene Homo, Neanderthals, and fossil and extant H. sapiens. We used high-resolution images to investigate the endostructural configuration of TD6 molars (tissue proportions, enamel thickness and distribution). TD6 permanent molars tend to exhibit on average thick absolute and relative enamel in 2D and 3D estimates, both in the complete crown and the lateral enamel. This condition is shared with the majority of extinct and extant hominin sample, except for Neanderthals and some isolated specimens. However, while the total crown percentage of dentine in TD6 globally resembles the low modern values, the lateral crown percentage of dentine tends to be much higher, closer to the Neanderthal signal. Similarly, the H. antecessor molar enamel distribution maps reveal a relative distribution pattern that is more similar to the Neanderthal condition (with the thickest enamel more spread at the periphery of the occlusal basin) rather than that of other fossil specimens and modern humans (with thicker cuspal enamel). Future studies on European Middle Pleistocene populations will provide more insights into the evolutionary trajectory of the typical Neanderthal dental structural organization.