Surgical correction of dorsally angulated distal radius malunions with fixed angle volar plating: a case series

Clinical and Radiographic Outcomes of Gap Osteotomy Versus Dorsal Opening Wedge Osteotomy for Extra-Articular Distal Radius Malunion and Internal Fixation Using a Volar Locking Plate Without Bone Graft

Purpose

Metaphyseal corrective osteotomy and fixed-angle volar locking plate fixation have reduced the need for additional bone grafting in symptomatic distal radius malunions. This study evaluated the outcomes of gap versus dorsal opening wedge and locking plate fixation without bone grafts for distal radius malunions and the correlation between the osteotomy defect and the osteotomy's distance from the articular surface with the union time.

Methods

We retrospectively reviewed 62 patients who underwent corrective osteotomy between 2010 and 2021. Gap osteotomy (n = 44) was performed to correct the coronal deformity predominantly, whereas an opening wedge osteotomy (n = 18) was performed to correct the sagittal deformity. No bone graft was used in any patient. Radiological outcomes comprised of correction of radial height, inclination, ulnar variance, volar tilt and the correlation between the osteotomy defect and the distance from the distal radial articular surface with the union time. The functional assessment comprised the disabilities of arm, shoulder, and hand questionnaire and the patient-rated wrist evaluation scores.

Results

All patients had a union of the osteotomy and statistically significant improvement in the radial height, inclination, ulnar variance, and tilt, irrespective of the osteotomy technique (P < .05). The mean defect length of the osteotomy, the time to the union, and the distance of the osteotomy were 4.7 mm (1-8.3 mm), 11.7 weeks (5-24 weeks), and 13.9 mm (1.6-35.8 mm), respectively. Time taken for union showed a weak positive correlation with the defect length of the osteotomy and no correlation with the distance of the distal osteotomy site from the articular surface. Opening wedge osteotomies took less time than the gap osteotomies. The mean postoperative disabilities of arm, shoulder, and hand questionnaire and the patient-rated wrist evaluation scores were 6.89 and 12.18, respectively.

Conclusions

Corrective osteotomy and fixed-angle volar plate fixation for distal radius malunion provide satisfactory union rates and clinical and radiological outcomes even without bone graft, irrespective of the osteotomy type, size, or location. However, length of the osteotomy defect influenced the union time.

Type of study/level of evidence

Therapeutic IV.

Managing the Extra-Articular Distal Radius Malunion

Distal radius fractures are common injuries. Satisfactory outcomes are typically achieved with appropriate nonoperative or operative treatment. A proportion of these injuries develop symptomatic malunions, which may be treated surgically with distal radius corrective osteotomy. A thorough understanding of the anatomy, biomechanics, radiographic parameters, and indications is needed to provide appropriate treatment. Factors, including surgical approach, osteotomy type, use of bone graft, fixation construct, management of associated tendon and/or nerve conditions, soft tissue contracture releases, and need for ulnar-sided procedures, should be considered. A comprehensive evaluation is necessary to guide understanding for when salvage procedures may be preferred.

Corrective Osteotomy of Malunited Fractures of the Distal Radius Using a Combined Surgical Approach

Background: Malunited distal radius (DR) fractures following conservative treatment range from 6% to 80% of clinical observations. Surgical treatment is used to return the articular surface of the radius to original anatomical position and to restore the natural transfer of strength, wrist kinematics, and function of the entire hand. The aim of this research was to study and analyze the results of corrective osteotomy of malunited distal radius fractures using a combined approach. Methods: From 2008 to 2018, 43 patients with malunited DR fractures who underwent surgery using a combined approach were followed up. Long-term results (1 year after surgery) were studied in detail in 32 patients. Indications for surgery were determined taking into account, first, complaints of severe pain in the wrist during exertion, decreased hand strength, and limited mobility of the wrist. Results: Five patients (15.6%) reported a number of minor complications: intra-articular screw placement (2), incorrect reposition (1), transient neuropathy of the superficial branch of the radial nerve (1), and delayed fracture consolidation (1). In addition, another 5 patients reported the progression of wrist arthritis. Suppurations of the surgical wound and malunited fragments were not reported. Conclusions: During reconstructive interventions, a combined approach with palmar plating provides optimal conditions for corrective osteotomy, adequate reposition and plastic repair of the bone defect, and minimization of the number of complications.

Clinical, functional and radiological outcomes of the use of fixed angle volar locking plates in corrective distal radius osteotomy for fracture malunion

BACKGROUND AND AIM

Fractures of the distal radius are a common injury and mal-union can occur in those managed non-operatively. This can cause significant functional limitations along with pain. A corrective osteotomy with the use of a volar locking plate aims to restore articular surface congruency and improve outcomes. We present our local experience with clinical, functional and radiological outcomes of corrective osteotomy using a fixed angle volar locking plate and bone graft for management of distal radius mal-union.

METHODS

Retrospective study. All adult patients. Both pre and post operatively clinical range of motion was recorded. Post operative PROMS was measure by DASH, MAYO and SF-12 and pain by means of a VAS measured from 0-10. Mean follow up period was at 15 months.

RESULTS

32 patients underwent the studied procedure. 24F-8F. Mean age: 56. Radiological union of corrective osteotomy: 28 (88%) of patients. 4 patients required further operative treatment to achieve corrective union. No other reported complications post-op. Post-operatively flexion improved by 24 and extension 20. Pronation was improved by 24 and supination 22. Pain was improved from an average VAS pre-operative of 5.6 to 1.6 post-operatively. Mean DASH scored improved from 57.8 to 16.2 post-operatively and MAYO 38.5 to 58.6. The mean post-operative SF-12 score was 46.2 from 31.

CONCLUSIONS

In this series of 32 patients (the biggest reported in the literature in our knowledge) a  corrective osteotomy with fixed-angle volar locking plate for mal-united distal radius has shown to improve both clinical-radiological and patient reported outcomes and provide good results of the very few complications' treatments.

The Dorsal Periosteal Curtain for Distal Radius Osteotomy Via the Volar Approach

Volar wedge osteotomy and angle stable volar plating is now considered a standard approach for correction of distal radius malunion. In previous descriptions of the technique, soft tissue release has been performed with periosteal incision in line with the bony osteotomy. We present a technique whereby the dorsal periosteum is incised more proximally creating a dorsal vascularized periosteal "curtain." Our technique has several advantages including systematic release of restraining soft tissues to allow better distraction and reduction of the malunion; a dorsal periosteal curtain of vascular tissue with which to contain bone graft, protect extensor tendons and expedite healing; and better access to locally available bone graft. The previously described rotation-advancement of pronator quadratus is also used for plate coverage. We have found this technique straightforward to execute and teach, and useful in mitigating against some of the potential risks of the standard technique.

Patient-reported outcomes after corrective osteotomy for a symptomatic malunion of the distal radius

AIMS

The primary aim of this study was to describe patient satisfaction and health-related quality of life (HRQoL) following corrective osteotomy for a symptomatic malunion of the distal radius.

METHODS

We retrospectively identified 122 adult patients from a single centre over an eight-year period who had undergone corrective osteotomy for a symptomatic malunion of the distal radius. The primary long-term outcome was the Patient-Rated Wrist Evaluation (PRWE) score. Secondary outcomes included the Quick Disabilities of the Arm, Shoulder and Hand (QuickDASH) score, the EQ-5D-5L score, complications, and the Net Promoter Score (NPS). Multivariate regression analysis was used to determine factors associated with the PRWE score.

RESULTS

Long-term outcomes were available for 89 patients (72%). The mean age was 57 years (SD 15) and 68 were female (76%). The median time from injury to corrective osteotomy was nine months (interquartile range (IQR) 6 to 13). At a mean follow-up of six years (1 to 11) the median PRWE score was 22 (IQR 7 to 40), the median QuickDASH score was 11.4 (IQR 2.3 to 31.8), and the median EQ-5D-5L score was 0.84 (IQR 0.69 to 1). The NPS was 69. Multivariate regression analysis showed that the presence of an associated ulnar styloid fracture was the only significant independent factor associated with a worse PRWE score when adjusting for confounding variables (p = 0.004).

CONCLUSION

We found that corrective osteotomy for malunion of the distal radius can result in good functional outcomes and high levels of patient satisfaction. However, the presence of an ulnar styloid fracture may adversely affect function. Level of Evidence: III (cohort study). Cite this article: Bone Joint J 2020;102-B(11):1542-1548.

Complications of Corrective Osteotomies for Extra-Articular Distal Radius Malunion

PURPOSE

Osteotomy of the distal radius for a fracture malunion is a challenging procedure. The purpose of this study was to review a series of osteotomies to determine the type and risk of complications.

METHODS

A retrospective cohort study was performed, including all Kaiser Permanente Southern California patients who were aged 18 years or older between January 1, 2007, and September 25, 2015, and underwent osteotomy for an extra-articular distal radius fracture malunion. Charts were reviewed for demographic data, comorbidities, osteotomy type (hinged vs distraction), implant, and bone graft type. Complications including infection, nonunion, loss of reduction, implant failure, nerve injury, tendon injury, and complex regional pain syndrome were recorded.

RESULTS

There were 60 patients who underwent extra-articular osteotomy of the distal radius for malunion during the study period. The mean age was 54 years (range, 21-83 years). There were 24 distraction-type (intervening bone graft) and 36 hinge-type (volar cortical contact maintained) osteotomies. Twenty-five of 60 patients had complications related to the procedure requiring 13 subsequent procedures. There were 7 nonunions and 3 cases of delayed healing at the osteotomy site. One extensor carpi radialis longus tendon laceration resulted from the use of an osteotome. There were 3 delayed extensor pollicis longus (EPL) tendon ruptures after surgery. The distraction-type osteotomy was associated with a greater risk of major complications including nonunion and delayed union.

CONCLUSIONS

A complication rate of nearly 50% was observed in distal radius osteotomies. Surgeons should be aware of the risk of injury to, or delayed rupture of the EPL tendon associated with these procedures. The risk of nonunion or delayed union is higher in distraction-type compared with hinge-type osteotomies. Low surgeon volume with this procedure may be a contributing factor to the high rate of complications.

TYPE OF STUDY/LEVEL OF EVIDENCE

Therapeutic IV.

Extra-articular Corrective Osteotomy With Bone Grafting to Achieve Lengthening and Regain Alignment for Distal Radius Fracture Malunion

Surgical correction of the distal radius fracture malunion is challenging because of the 3-dimensional deformity. We propose a method by using the Kapandji intrafocal pinning in corrective osteotomy for treatment of the distal radius fracture malunion to facilitate the alignment correction while using the bone graft to restore the radial length. The surgery was started with the osteotomy from a volar approach, and the osteotomy gap was expanded gradually. Then, allobone grafting was performed to maintain the corrected radial length. We used the Kapandji intrafocal pinning dorsally to provide dorsal supporting force and radially to correct the radial inclination. Finally, a volar plate was used to buttress and push the distal fragment to fit as to regain the correct volar tilt. We enrolled 10 patients of distal radius fracture malunion with a mean age of 59.3 years. All patients had bone healing within 3 months after surgery. The mean lengthened distance was 5 mm. The radial inclination and volar tilt could be corrected with improved functional results.

Surgical Technique of Corrective Osteotomy for Malunited Distal Radius Fracture Using the Computer-Simulated Patient Matched Instrument

The conventional corrective osteotomy for malunited distal radius fracture that employs dorsal approach and insertion of a trapezoidal bone graft does not always lead to precise correction or result in a satisfactory surgical outcome. Corrective osteotomy using a volar locking plate has recently become an alternative technique. In addition, the use of patient-matched instrument (PMI) via computed tomography simulation has been developed and is expected to simplify surgical procedures and improve surgical precision. The use of PMI makes it possible to accurately position screw holes prior to the osteotomy and simultaneously perform the correction and place the volar locking plate once the osteotomy is completed. The bone graft does not necessarily require a precise block form, and the problem of the extensor tendon contacting the dorsal plate is avoided. Although PMI placement and soft tissue release technique require some degree of specialized skill, they comprise a very useful surgical procedure. On the other hand, because patients with osteoporosis are at risk of peri-implant fracture, tandem ulnar shortening surgery should be considered to avoid excessive lengthening of the radius.

Corticocancellous bone graft vs cancellous bone graft for the management of unstable scaphoid nonunion

INTRODUCTION

This study was undertaken to determine whether corticocancellous bone grafting and cancellous bone grafting differ in terms of bone union rate, restoration of scaphoid anatomy, and wrist function when unstable scaphoid nonunions are concomitantly treated by screw fixation.

MATERIALS AND METHODS

This is retrospective cohort study. In Group A (17 patients), unstable scaphoid nonunion was treated with corticocancellous graft harvested from the iliac crest and headless compression screw using volar approach. In Group B (18 patients), unstable scaphoid nonunion was treated with cancellous graft harvested from the distal radius or iliac crest and headless compression screw using volar approach Mean time to union was measured using CT image. Scaphoid deformity was also measured using lateral intrascaphoid angle and height to length ratio using CT images. Wrist functional status was assessed by measuring grip strength, wrist range of motion, and DASH score at 1 year postoperatively.

RESULTS

Mean time to union was significantly greater in Group A (15 weeks vs. 11 weeks). No significant intergroup difference was observed for lateral intrascaphoid angle and height to length ratio after treatment of scaphoid nonunion. No significant intergroup difference was observed for grip strength, wrist range of motion, or DASH scores at 1 year postoperatively.

CONCLUSIONS

Cancellous bone grafting was found to lead to earlier bone union than corticocancellous bone grafting and to similar restorations of scaphoid deformity and wrist function when scaphoid nonunion was treated by headless compression screw fixation and bone grafting.

LEVEL OF EVIDENCE

Prognostic, III.

Intramedullary nailing for correction of post-traumatic deformity in late-diagnosed distal radius fractures

BACKGROUND

Post-traumatic deformity of the distal radius may lead to multiple sequelae and severe functional impairment. Intramedullary fixation is a novel technique for treatment of distal radius fractures. The present study aimed to evaluate the functional and radiographic outcomes of intramedullary nailing for correction of post-traumatic deformity in late-diagnosed fractures of the distal radius.

MATERIALS AND METHODS

From July 2009 to February 2011, 16 patients with late-diagnosed displaced fractures of the distal radius were included. Eligible inclusion was extra-articular fracture for more than 4 weeks. Surgical correction and internal fixation with intramedullary nailing was performed for treatment of ten AO type A2 and six AO type A3 fractures. All patients were followed up radiographically and clinically for an average of 20.3 months.

RESULTS

All fractures achieved bone union without major complications. Functional status and radiographic alignment significantly improved postoperatively. There was no significantly secondary displacement comparing early postoperative and final radiographic parameters. The functional results according to the Mayo wrist scoring system were good or excellent in 94 % of patients. The mean score was 83.8.

CONCLUSION

Surgical correction and internal fixation with the intramedullary nail is a feasible and less invasive technique with few complications in the treatment of post-traumatic deformity of the distal radius.

LEVEL OF EVIDENCE

IV.

Orthogonal Plate Fixation With Corrective Osteotomy for Treatment of Distal Radius Fracture Malunion

PURPOSE

To report outcomes of patients with distal radius fracture malunions treated with corrective osteotomy and orthogonal volar and radial "90-90" plate fixation.

METHODS

We performed a retrospective review of all patients who underwent distal radius corrective osteotomy and 90-90 fixation from January 2008 through December 2014. Demographic data, injury history, prior treatments, and clinical examination values were recorded. Preoperative radiographic measurements were used to classify the type and severity of deformity. The outcomes were patient-reported pain levels, Quick Disabilities of the Arm, Shoulder, and Hand (QuickDASH) functional scores, and radiographic outcomes. Secondary outcomes, including complications and the need for additional surgeries, were also noted.

RESULTS

Thirty-nine cases (31 extra-articular, 8 combined intra- and extra-articular) were included. At mean postoperative follow-up interval of 4 years, significant improvements were observed clinically in wrist flexion-extension arc, grip strength, pain, and Quick Disabilities of the Arm, Shoulder, and Hand scores. Radiographically, significant postoperative improvements were noted in ulnar variance, radial inclination, intra-articular stepoff, and radial tilt, with volarly and dorsally angulated malunions corrected to 9° and 7° of volar tilt, respectively. Twelve patients (31%) underwent additional surgery, the most common being plate removal in 7 patients, 3 of which involved removal of the radial plate.

CONCLUSIONS

For patients with symptomatic malunion of the distal radius, corrective osteotomy with 90-90 plate fixation is an effective treatment option for improving pain and restoring function for both volarly and dorsally angulated malunions, including malunions with an intra-articular component.

TYPE OF STUDY/LEVEL OF EVIDENCE

Therapeutic IV.

[Are there any indications for surgery of distal radius malunion in elderly patients?]

Malunions of the distal radius are associated most of the time with disturbances of the distal radioulnar (DRU) joint. While a corrective osteotomy of the distal radius is a well-known procedure in younger patients, manual workers and active patients, is it justified in independent elderly patients above 70 years of age? These techniques improve function, reorient the articular surfaces, protect against complications such as degenerative osteoarthritis and stiffness of the wrist, and they improve DRU balance. Osteotomies performed with bone or artificial grafts have comparable outcomes. Either a volar or dorsal approach can be used depending on the orientation of the carpal articular surface of the radius and the need to lengthen the radius. If the patient is active and independent, the clinical benefit is higher when an osteotomy is done for significant malunions; urgent treatment of these older patients brings about additional costs and unclear benefits.

Volar Locking Plate Breakage after Nonunion of a Distal Radius Osteotomy

We report a 38-year-old male with a nonunion followed by plate breakage after volar plating of a distal radius osteotomy. Volar locking plates have added a new approach to the treatment of distal radius malunions, due to a lower morbidity of the surgical approach and the strength of the final construction, allowing early mobilization and return to function. Conclusion. Plate breakage is an uncommon complication of volar locking plate fixation. To our knowledge, few cases have been described after a distal radius fracture and no case has been described after a distal radius corrective osteotomy. In the present case, plate breakage appears to have occurred as a result of a combination of multiple factors as the large corrective lengthening osteotomy, the use of demineralized bone matrix instead of bone graft, and the inappropriate fixation technique as an unfilled screw on the osteotomy site, rather than the choice of plate.

In Vivo Contact Characteristics of Distal Radioulnar Joint With Malunited Distal Radius During Wrist Motion

PURPOSE

To determine whether distal radioulnar joint (DRUJ) contact characteristics were altered in patients with malunited distal radius fractures.

METHODS

We obtained computed tomography scans at 5 positions of both wrists of 6 patients who had unilateral malunited distal radius fractures with dorsal angulation from 10° to 20° and ulnar variance less than 3 mm. We reconstructed 3-dimensional images and mapped contact regions of DRUJ by calculating the shortest distance between the 2 opposing bones. The contact areas of the DRUJ were measured and the contact region centers were calculated and analyzed. The values of the malunited side were compared with those of the contralateral uninjured side.

RESULTS

In the uninjured wrist, the contact areas of the DRUJ increased slightly from wrist flexion to extension and ulnar deviation. In the malunited wrist, we found the contact areas of DRUJ to be progressively reduced from 20° flexion to neutral, 40° extension, and 20° extension, to ulnar deviation. The centroid of this area on the sigmoid notch moved to distal from flexion to extension. Compared with the contralateral uninjured wrist, the contact area significantly decreased during wrist extension and ulnar deviation, and significantly increased during wrist flexion. The centroids of this area on sigmoid notch all moved volarly in all selected wrist positions.

CONCLUSIONS

The contact areas of the DRUJ and the centroid of contact area on sigmoid notch are altered in patients with malunited distal radius fractures. The contact area of the DRUJ increases during wrist flexion and decreases during wrist extension and ulnar deviation. The centroids of the contact area on sigmoid notch move volarly during wrist flexion-extension and ulnar deviation.

CLINICAL RELEVANCE

The in vivo findings suggest that alterations in joint mechanics may have an important role in the dysfunction associated with these injuries.

A less invasive distal osteotomy of the radius for malunited dorsally displaced extra-articular fractures

A less invasive corrective osteotomy for symptomatic post-traumatic deformity of the distal radius was done in 12 patients. They were followed up for an average of 3.7 years. The indications for correction were based on the patients' level of activities, pain, functional limitations, loss of grip strength or deformity occurring with an extra-articular rotational malunion of the distal end of the radius. The procedure included a dorsal open wedge osteotomy through a dorsal incision in which the fulcrum of rotation, or hinge, was located at the palmar cortex, and stabilized with an extra- and intramedullary fixed angle device. The bone defect was replaced with autologous morsellized iliac bone graft. The final outcome was graded as very good in eight patients, good in two and fair in two. Level of evidence: IV.

Is Bone Grafting Necessary in the Treatment of Malunited Distal Radius Fractures?

Background Open wedge osteotomy with bone grafting and plate fixation is the standard procedure for the correction of malunited distal radius fractures. Bone grafts are used to increase structural stability and to enhance new bone formation. However, bone grafts are also associated with donor site morbidity, delayed union at bone-graft interfaces, size mismatch between graft and osteotomy defect, and additional operation time. Purpose The goal of this study was to assess bone healing and secondary fracture displacement in the treatment of malunited distal radius fractures without the use of bone grafting. Methods Between January 1993 and December 2013, 132 corrective osteotomies and plate fixations without bone grafting were performed for malunited distal radius fractures. The minimum follow-up time was 12 months. Primary study outcomes were time to complete bone healing and secondary fracture displacement. Preoperative and postoperative radiographs during follow-up were compared with each other, as well as with radiographs of the uninjured side. Results All 132 osteotomies healed. In two cases (1.5%), healing took more than 4 months, but reinterventions were not necessary. No cases of secondary fracture displacement or hardware failure were observed. Significant improvements in all radiographic parameters were shown after corrective osteotomy and plate fixation. Conclusion This study shows that bone grafts are not required for bone healing and prevention of secondary fracture displacement after corrective osteotomy and plate fixation of malunited distal radius fractures. Level of evidence Therapeutic, level IV, case series with no comparison group.

In Vivo changes in the lengths of carpal ligaments after mild dorsal angulation of distal radius fractures

The need for surgical correction in patients with malunion with mild dorsal angulation after a distal radius fracture is controversial. We specifically investigated in vivo changes in the lengths of carpal ligaments in a group of patients with mild-degree dorsal angulation following a distal radial fracture. We obtained computed tomography scans of both wrists in eight patients, whose distal radius on one side had united with dorsal angulation from 10° to 20°. The three-dimensional images of the carpus were reconstructed and the lengths of wrist ligaments were measured based on known anatomical landmarks. Compared with the contralateral uninjured side, the dorsal radiocarpal ligament and ulnotriquetral ligament were substantially lengthened (p < 0.05) and the long radiolunate ligament was substantially shortened (p < 0.05) at most wrist positions except extension. However, five other ligaments that we measured did not show significant differences in length compared with those of the uninjured side (p > 0.05). The lengths of some ligaments are substantially altered even by mild dorsal angulation of the distal radius, while the lengths of most other ligaments are not substantially affected.

Malunited extra-articular distal radius fractures: corrective osteotomies using volar locking plate

Background

Multiple techniques for corrective osteotomy have been developed in recent years with the same aims: to improve the radiographic parameters and improve motion, pain and grip strength. Volar fixed-angle plates have added a new concept to the treatment of distal radius fractures thanks to the low morbidity of the surgical approach and the strength of the final construct, allowing early mobilization and return to function.

Materials and methods

Between 2005 and 2012, 20 patients with symptomatic dorsally malunited extra-articular fractures of the distal radius underwent corrective osteotomy using a volar locking plate without additional bone graft. At a mean follow-up of 50 months, all the patients were clinically and functionally evaluated.

Results

All measurements of pain, final range of motion and grip strength significantly improved compared with preoperative measurements. The mean preoperative DASH score reduced from 54 points preoperatively to 25 postoperatively. Based on the modified Mayo wrist score, we obtained 14 excellent and six good results. Palmar tilt improved from an average of 23° to 11°. Radial inclination improved from an average of 29° to 22°, and ulnar variance decreased from an average of 3.6 mm to 0.9 mm. There were two cases of transient median neuroapraxia that resolved before the 6-week follow-up appointment. No other major complications, including non-union and infection, were observed.

Conclusion

The volar approach and locking plate, without necessarily the use of bone grafting, proved to be an effective approach for addressing symptomatic and even severe deformities of the distal radius.

Type of study/level of evidence

Therapeutic IV

Corrective osteotomy of the distal radius following failed internal fixation

INTRODUCTION

The purpose of this study was to quantify the clinical and radiographic outcomes after corrective osteotomy for malunions of the distal radius following failed internal fixation.

MATERIALS AND METHODS

Results of 18 patients (8 women, 10 men; mean age 41 years) are presented an average of 7 years after osteotomy of a malunited distal radius fracture. We assessed active range of motion, grip strength, radiographic alignment, pain and disability. Subjective and objective data were summarized using the modified Mayo Wrist Score and the point-score system of Fernandez.

RESULTS

Wrist motion, pain and deformity improved with the operation in all cases. The modified Mayo Wrist Score averaged 79 points. The scale of Fernandez indicated ten good, two fair and six poor results.

CONCLUSIONS

The results of this study suggest that the operative correction of a distal radius malunion following an unsuccessful internal fixation can be achieved with outcomes comparable to those reported after initial nonoperative treatment.

3-Dimensional prebent plate fixation in corrective osteotomy of malunited upper extremity fractures using a real-sized plastic bone model prepared by preoperative computer simulation

PURPOSE

To assess the clinical outcome and accuracy of prebent plate fixation in corrective osteotomy for malunited upper extremity fractures using a plastic bone model manufactured by preoperative computer simulation.

METHODS

Nine consecutive patients underwent computed tomography (CT)-based 3-dimensional corrective osteotomy for malunited upper extremity fractures. There were 4 cubitus varus deformities, 1 cubitus valgus deformity, and 4 forearm diaphyseal malunions. We constructed a computer model of the affected bones using the CT data and simulated the 3-dimensional deformity correction on a computer. A real-sized plastic model of the corrected bone was manufactured by rapid prototyping. We used a metal plate, prebent to fit the plastic bone model, in the actual surgery. Patients were evaluated after an average follow-up of 22 months (range, 14-36 mo). We retrospectively collected radiographic and clinical data at the most recent follow-up and compared them with preoperative data. We also performed CT after surgery and evaluated the error in corrective osteotomy as the difference between preoperative simulation and postoperative bone model.

RESULTS

The range of forearm rotation and grip strength in patients with forearm malunions improved after corrective osteotomies of the radius and ulna. Wrist pain, which 2 patients with forearm malunion had experienced before surgery, disappeared or decreased substantially after surgery. Radiographic examination indicated that preoperative angular deformities were nearly nonexistent after all corrective osteotomies. Three-dimensional errors in the corrective osteotomy using a prebent plate, as evaluated by CT data, were less than 3 mm and 2°.

CONCLUSIONS

Prebent plate fixation in corrective osteotomy for malunited upper extremity fractures using a 3-dimensionally corrected, real-sized plastic bone model prepared by preoperative computer simulation is a precise and relatively easily performed technique that results in satisfactory clinical outcome.

TYPE OF STUDY/LEVEL OF EVIDENCE

Therapeutic IV.

Opening wedge osteotomy for distal radius malunion: dorsal or palmar approach?

Background There are various technical variations to consider when performing a corrective osteotomy of a distal radius malunion. We chose two of the more commonly reported techniques and compared the results of volar (palmar) osteotomy and fixation with dorsal osteotomy and fixation. Method Within a continuous cohort of patients who had undergone corrective osteotomy for a malunited Colles fracture, two groups could be identified retrospectively. In 8 patients a dorsal approach was used. A structural trapezoidal graft, subtending the amount of correction, was inserted into the osteotomy gap and stabilization was performed with a thin round-hole mini-fragment plate. In 14 patients a palmar approach and a palmar fixed-angle plate was used for correction of the malunion and for angular stable rigid fixation of the two fragments. The osteotomy gap was loosely filled with nonstructural cancellous bone chips. A retrospective comparison of the two groups was performed to see whether the outcome was affected by the use of either operative technique.The demographics, the preoperative amount of deformity, range of motion, pain, and force were comparable for both groups. All osteotomies healed without loss of correction. After a minimal follow-up of one year, radiographic appearance, objective functional parameters were assessed and subjective data (Disabilities of the Arm, Shoulder, and Hand [DASH] score and special pain and function questionnaire) obtained. Results These data did not show statistical difference for the two groups except for the amount of final wrist flexion. This parameter was significantly better in patients who had palmar approaches and fixed-angle plates. Conclusion Corrective osteotomies of distal radius malunions can be done in either way. It might result in some better flexion, if performed volarly.

Correction of dorsally-malunited extra-articular distal radial fractures using volar locked plates without bone grafting

Malunion is the most common complication of the distal radius with many modalities of treatment available for such a problem. The use of bone grafting after an osteotomy is still recommended by most authors. We hypothesised that bone grafting is not required; fixing the corrected construct with a volar locked plate helps maintain the alignment, while metaphyseal defect fills by itself. Prospectively, we performed the procedure on 30 malunited dorsally-angulated radii using fixed angle volar locked plates without bone grafting. At the final follow-up, 22 wrists were available. Radiological evidence of union, correction of the deformity, clinical and functional improvement was achieved in all cases. Without the use of bone grafting, corrective open wedge osteotomy fixed by a volar locked plate provides a high rate of union and satisfactory functional outcomes.

The extended flexor carpi radialis approach for partially healed malaligned fractures of the distal radius

PURPOSE

The aim of the study is to evaluate the safety and utility of the extended flexor carpi radialis (FCR) exposure and volar locking plate fixation for partially healed malaligned fractures of distal radius.

MATERIALS AND METHODS

Thirty-five patients with a partially healed malaligned fracture of the distal radius had realignment of the fracture using an extended FCR approach (release of the insertion of the brachioradialis and dorsal periosteum) and volar locked plate and screw fixation.

RESULTS

Retrospective review an average of 20 months after the index operation patients identified an average wrist extension of 68°, flexion of 64°, pronation of 84° and supination of 85°. Radial inclination, volar tilt and ulnar variance significantly improved compared to preoperative radiographs. All fractures healed, and there were no infections, implant loosening or breakage or tendon ruptures.

CONCLUSIONS

This study demonstrated that the extended FCR approach is safe and effective as a treatment method for nascent malunions of the distal radius.

Three-dimensional deformity analysis of malunited distal radius fractures and their influence on wrist and forearm motion

Little information exists about three-dimensional (3-D) deformity patterns of malunited distal radius fractures including axial deformity. The current study aimed to clarify the 3-D deformity pattern of malunited distal radius fractures and reveal the influence of osseous deformities, including axial rotation deformity, on wrist and forearm motion. The deformity of 20 dorsally tilted malunions were evaluated using 3-D computer models created from CT data, and correlations between deformity components and range of motion were assessed. The 3-D deformity analysis showed that axial malalignment in pronation, which showed a correlation with the degree of radial tilt deformity, was very common. A radial tilt deformity of > 5° was observed in only 45% of cases. Although the range of wrist flexion and extension showed a correlation with dorsal tilt deformity, the range of forearm pronation and supination did not correlate with distal radius deformities.

Rapid resorption of calcium sulfate and hardware failure following corrective radius osteotomy: 2 case reports

Bone substitutes are being increasingly used and may avert the need for autogenous bone graft in orthopedic surgery. Thus it is important to note complications that occur with them to better understand the limitations. We report on early mechanical failure of injectable calcium sulfate leading to implant failure in 2 elderly patients who had corrective osteotomies for malunited distal radius fractures. We hypothesize that these occurred because there was inadequate new bone formation to replace the resorbing bone substitute. We advise caution when using bone substitutes in patients with expected delayed fracture healing.

The role of bone allografts in the treatment of angular malunions of the distal radius

PURPOSE

Two cohorts of patients who had corrective osteotomies and volar platings for malunited fractures of the distal radius were compared retrospectively to determine whether the time to union and the outcome were affected by bone allograft.

METHODS

Patients in the first group (n = 14) did not receive any bone graft; patients in the second group (n = 14) had allograft bone chips following volar plating. Indications for surgery, surgical technique, and postoperative rehabilitation were the same in both groups. Volar cortical contact was maintained using a volar locking plate in all patients. Radiographic parameters of deformity correction, time to union, wrist and forearm range of motion, grip strength, patient-rated wrist evaluation and Disabilities of the Arm, Shoulder, and Hand questionnaire were used to evaluate the outcome before and after the surgery. Average follow-up time was 36 weeks. Patients who had diabetes, who smoked, who had a body mass index of more than 35, and who required lengthening for deformity correction were excluded from the study.

RESULTS

Osteotomies in both groups healed without loss of surgical correction. Final outcome and time to union revealed no significant differences, clinically or statistically, between the 2 groups. The Disabilities of the Arm, Shoulder, and Hand score was improved in both groups.

CONCLUSIONS

When volar cortical contact was maintained using a volar locked plate, bone allograft at the osteotomy site did not improve the final outcome.

TYPE OF STUDY/LEVEL OF EVIDENCE

Therapeutic III.

Clinical outcomes of corrective osteotomy for distal radial malunion: a review of opening and closing-wedge techniques

BACKGROUND

Radial corrective osteotomy is an established but challenging treatment for distal radial malunion. There is ongoing discussion over whether an opening or closing-wedge osteotomy should be employed. The purpose of the present study was to retrospectively compare the clinical and radiographic results of conventional opening-wedge osteotomy with those of our closing-wedge technique.

METHODS

We retrospectively evaluated forty-two patients with extra-articular distal radial malunion who were managed with corrective osteotomy and were followed for a minimum of one year. Twenty-two patients were managed with radial opening-wedge osteotomy and interpositional bone graft or bone-graft substitute, and twenty were managed with simultaneous radial closing-wedge and ulnar shortening osteotomy without bone graft. The selection of the surgical procedure was determined by the surgeon. Each patient was evaluated on the basis of objective radiographic measurements and functional outcomes as determined on the basis of clinical examination, including range of wrist motion, grip strength, pain-rating score, Mayo wrist score, and Disabilities of the Arm, Shoulder and Hand (DASH) score.

RESULTS

The mean duration of follow-up was thirty-six months (range, twelve to 101 months) for the opening-wedge cohort and twenty-eight months (range, twelve to eighty-seven months) for the closing-wedge cohort. The two techniques were comparable in terms of complications. Postoperative volar tilt and ulnar variance improved significantly compared with the preoperative status in each cohort (p < 0.05). Restoration of ulnar variance to within defined criteria (-2.5 to 0.5 mm) was significantly more frequent in the closing-wedge cohort than in the opening-wedge cohort (p < 0.001). The postoperative mean extension-flexion arc of the wrist (p < 0.001) and Mayo wrist score (p = 0.008) were significantly better in the closing-wedge cohort. Differences between the two cohorts in terms of the pronation-supination arc, grip strength, pain-rating score, and DASH scores were not significant.

CONCLUSIONS

The closing-wedge osteotomy technique is an effective reconstructive procedure for the treatment of extra-articular distal radial malunion. It is significantly better than the opening-wedge osteotomy technique in terms of the restoration of ulnar variance, the extension-flexion arc of wrist motion, and the Mayo wrist score.

Is distal ulna resection influential on outcomes of distal radius malunion corrective osteotomies?

INTRODUCTION

The mechanical repercussions of distal radius malunion on the distal radio-ulnar (DRU) joint are common and inconsistently corrected by radius osteotomy alone. Ulnar resection has thus become a palliative solution.

HYPOTHESES

Does ulna resection influence the outcomes of distal radius malunion corrective osteotomies? What preoperative factors warrant preserving the distal radio-ulnar joint?

PATIENTS AND METHODS

Twenty-one corrective osteotomies of the radius were retrospectively reviewed. Ulna resection was performed in cases of cartilage damage, joint incongruence, or persistent stiffness in pronosupination after osteotomy of the radius. After the osteotomies, two groups were identified: 10 cases with preservation of the distal end of the ulna (DRU+) and eleven with distal resections (DRU-).

RESULTS

At review, all the osteotomies had united, with comparable anatomical restoration of the radial epiphysis for the two groups. We noted a statistically significant gain in mobility after osteotomy for both techniques (but no difference between them) and comparable grip strengths with 89.8% of the contralateral side for the DRU+ group versus 90.4% for the DRU- group. Pain (scale, 0-3) had significantly diminished for both groups decreasing from 1.9 to 0.3 for the DRU+ group and from 2.5 to 1.1 for the DRU- group, with no significant difference between them. The Mayo Clinic Wrist Score and the DASH score did not differ significantly with 73/100 and 13.5 for the DRU+ group compared with 68.2/100 and 20.2 for the DRU- group, respectively.

DISCUSSION

These results show that the impact of ulna resection after distal osteotomy of the radius is limited as reflected by radiological correction, mobility and grip strength. However, after resection pain in the ulnar tilt of the wrist due to instability of the distal ulnar stump was noted. Besides cartilage damage, ulnar deviation of over 5mm was, for this series, a constant factor in non-preservation of the DRU joint.

LEVEL OF EVIDENCE

Level IV. Retrospective study.

Distal radius osteotomy with volar locking plates based on computer simulation

BACKGROUND

Corrective osteotomy using dorsal plates and structural bone graft usually has been used for treating symptomatic distal radius malunions. However, the procedure is technically demanding and requires an extensive dorsal approach. Residual deformity is a relatively frequent complication of this technique.

QUESTIONS/PURPOSES

We evaluated the clinical applicability of a three-dimensional osteotomy using computer-aided design and manufacturing techniques with volar locking plates for distal radius malunions.

PATIENTS AND METHODS

Ten patients with metaphyseal radius malunions were treated. Corrective osteotomy was simulated with the help of three-dimensional bone surface models created using CT data. We simulated the most appropriate screw holes in the deformed radius using computer-aided design data of a locking plate. During surgery, using a custom-made surgical template, we predrilled the screw holes as simulated. After osteotomy, plate fixation using predrilled screw holes enabled automatic reduction of the distal radial fragment. Autogenous iliac cancellous bone was grafted after plate fixation.

RESULTS

The median volar tilt, radial inclination, and ulnar variance improved from -20°, 13°, and 6 mm, respectively, before surgery to 12°, 24°, and 1 mm, respectively, after surgery. The median wrist flexion improved from 33° before surgery to 60° after surgery. The median wrist extension was 70° before surgery and 65° after surgery. All patients experienced wrist pain before surgery, which disappeared or decreased after surgery.

CONCLUSIONS

Surgeons can operate precisely and easily using this advanced technique. It is a new treatment option for malunion of distal radius fractures.

The role of locking technology in the hand

Locked fixed-angle plating in the hand and wrist helps to optimize outcomes following surgical fixation of select acute fractures and complex reconstructions. Select indications include unstable distal ulna head/neck fractures, periarticular metacarpal and phalangeal fractures, comminuted/multifragmentary diaphyseal fractures with bone loss (ie, combined injuries of the hand), osteopenic/pathologic fractures, nonunions and corrective osteotomy fixation, and small joint arthrodesis. Locked plating techniques in the hand should not be seen as a panacea for wrist and digital acute trauma and delayed reconstructions. An understanding of the biomechanics of fixed-angle plating and proper technical application of locking constructs will optimize outcomes and minimize complications. As clinical experience with locking technology in hand trauma broadens, new indications and applications will emerge. Currently, several systems are available. The specific implants share common features in their protocols for insertion, but unique differences in their design (ie, individual locking mechanisms, uniaxial vs polyaxial locking capability, metallurgy, and plate profiles) must be appreciated and considered preoperatively.

Treatment of extra-articular distal radial malunions with an intramedullary implant

PURPOSE

Malunited distal radius fractures pose considerable problems, especially for young, active individuals. Surgical correction with osteotomy, bone grafting, and internal fixation with plates and screws has been the treatment of choice. Locked intramedullary fixation is an alternative technique to provide bony stability while minimizing soft tissue irritation in the management of acute distal radius fractures, with acceptable clinical results. The purpose of this study was to describe our experience with the use of an intramedullary device combined with grafting to repair distal radial malunions. This fixation device is inserted through the radial styloid and obtains distal fixation with 3 fixed-angle locking screws.

METHODS

Thirteen patients underwent distal radius malunion repair with an intramedullary implant and grafting. There were 6 male and 7 female participants with an average age of 51 years (range, 18-72 y). Patients were evaluated at an average follow-up of 24 months (range, 13-38 mo). Clinical outcome was measured by range of motion of the wrist and forearm, and grip strength, and by using the Disabilities of the Arm, Shoulder, and Hand questionnaire. We analyzed radiographs to determine time to union and adequacy of correction.

RESULTS

All of the malunions healed, with an average time to healing of 11 weeks. Patients' average range of motion at follow-up was 56 degrees of flexion, 66 degrees extension, 85 degrees pronation, and 84 degrees supination. Mean grip strength was 83% of the unaffected side, and the average Disabilities of the Arm, Shoulder, and Hand score was 21. Radiographs taken on the latest follow-up showed correction to the following average parameters: 20.6 degrees radial inclination, 11.0 mm radial height, +1.0 mm ulnar variance, and 2.1 degrees volar tilt.

CONCLUSIONS

The technique presented in this report demonstrates the effectiveness of an intramedullary nail combined with bone graft or graft substitute in repairing malunited fractures of the distal radius. The results show reliable correction of the deformity and good functional outcomes.

TYPE OF STUDY/LEVEL OF EVIDENCE

Therapeutic IV.

Long-term outcomes of corrective osteotomy for the treatment of distal radius malunion

Corrective osteotomy is an established but challenging treatment for distal radius malunion. Short- and intermediate-term results have been previously published while long-term results have not. The long-term results of 22 patients treated with corrective osteotomy for symptomatic distal radius malunion are presented (range 6-24 years, mean 13 years). All patients completed the DASH questionnaire and the modified Gartland and Werley, and Green and O'Brien scores postoperatively. Wrist alignment was assessed through standard wrist radiographs. Average wrist flexion-extension was 72.5% of the contralateral limb. Grip strength averaged 71%. The DASH score averaged 16 points corresponding to mild perceived disability. Results were categorized as fair on both the Gartland and Werley score (average 9 points) and the modified Green and O'Brien score (average 67 points). Wrist alignment was maintained over time but 13 patients presented mild to moderate symptomatic wrist arthritis. The outcome presented may be a reflection of the use of stricter evaluation instruments or reflect the development of post-traumatic arthritis.

Management of post-traumatic malunion of fractures of the distal radius

Distal radius malunions are a common cause of patient morbidity. This review of the literature surrounding distal radius malunion covers the demographics, pathologic anatomy, and indications for surgery, surgical techniques, and salvage options. Particular emphasis is placed on subject areas that have not been reviewed as extensively in previous articles, including: intra-articular malunion, computer-assisted techniques, bone graft alternatives, and volar fixed-angle plate osteosynthesis.

Sagittal rotational malunions of the distal radius: the role of pure derotational osteotomy

Sagittal rotational malunion after distal radius fractures was identified in eight patients by the presence of a "hinge" point on the volar cortex on the lateral radiograph, and the ulnar head being shorter than the anterior lip of the radius on the posterior-anterior radiograph. The surgical correction consisted of preplating the distal fragment with a volar locking plate before an osteotomy through the "hinge" point, and correcting the dorsal tilt of the distal fragment. Any dorsal defect was filled with cancellous bone graft from the olecranon. Pain, range of motion and grip all improved. Disabilities of arm, shoulder and hand score changed from 54 to six. Dorsal sagittal tilt improved by 26 degrees , from -23 degrees to +3 degrees . Ulnar variance improved by 3 mm, from +1.5 to -1.5 mm, becoming identical to the opposite side. A pure derotational osteotomy corrected the apparent shortening of the radius and restored the volar tilt.

Tricalcium phosphate bone substitute in corrective osteotomy of the distal radius

AIM

To evaluate the outcome of using tricalcium phosphate (TCP) as void filler and structural support in corrective opening-wedge osteotomy of the distal radius.

METHODS

A consecutive series of 17 patients with malunited dorsally angulated distal radius fracture underwent corrective osteotomy using plates, screws and TCP blocks. Results were evaluated postoperatively with DASH at 6 months with radiography at 8-12 weeks and 0.5-3.5 years.

RESULTS

Mean DASH score improved from 52 (S.D. 22) preoperatively to 30 (S.D. 22) postoperatively. There was one non-union. There was also a mean loss of radial length of 1.1mm (S.D. 1.0mm) between the first postoperative radiograph and final follow-up. Radiolucent zones were observed around the TCP grafts after 6-8 weeks in 10/14 cases, but could not be statistically correlated with the slight loss of reduction.

CONCLUSIONS

TCP seems to be an alternative to iliac crest bone grafting in corrective osteotomies of the distal radius. The shortening observed over time may be attributable to inflammation induced by the TCP.

Three-dimensional corrective osteotomy of malunited fractures of the upper extremity with use of a computer simulation system

BACKGROUND

Three-dimensional anatomical correction is desirable for the treatment of a long-bone deformity of the upper extremity. We developed an original system, including a three-dimensional computer simulation program and a custom-made surgical device designed on the basis of simulation, to achieve accurate results. In this study, we investigated the clinical application of this system using a corrective osteotomy of malunited fractures of the upper extremity.

METHODS

Twenty-two patients with a long-bone deformity of the upper extremity (four with a cubitus varus deformity, ten with a malunited forearm fracture, and eight with a malunited distal radial fracture) participated in this study. Three-dimensional computer models of the affected and contralateral, normal bones were constructed with use of data from computed tomography, and a deformity correction was simulated. A custom-made osteotomy template was designed and manufactured to reproduce the preoperative simulation during the actual surgery. When we performed the surgery, we placed the template on the bone surface, cut the bone through a slit on the template, and corrected the deformity as preoperatively simulated; this was followed by internal fixation. All patients underwent radiographic and clinical evaluations before surgery and at the time of the most recent follow-up.

RESULTS

A corrective osteotomy was achieved as simulated in all patients. Osseous union occurred in all patients within six months. Regarding cubitus varus deformity, the humerus-elbow-wrist angle and the anterior tilt of the distal part of the humerus were an average of 2 degrees and 28 degrees, respectively, after surgery. Radiographically, the preoperative angular deformities were nearly nonexistent after surgery. All radiographic parameters for malunited distal radial fractures were normalized. The range of forearm rotation in patients with forearm malunion and the range of wrist flexion-extension in patients with a malunited distal radial fracture improved after surgery.

CONCLUSIONS

Corrective osteotomy for a malunited fracture of the upper extremity with use of computer simulation and a custom-designed osteotomy template can accurately correct the deformity and improve the clinical outcome.

Malunited fractures of the distal radius treated with corrective osteotomy using volar locking plate and a corticocancellous bone graft following immediate mobilisation

We describe our experience of using a volar locking plate for corrective osteotomy and bone grafting combined with early mobilisation in the treatment of distal radius malunions. Corrective osteotomy of the distal radius was performed through a volar approach, and fixated by a volar locking plate associated with corticocancellous iliac bone grafting in three patients aged 16, 71 and 75 years. Two patients had had volarly displaced malunion and one dorsally displaced malunion. Wrist motion was started immediately after surgery. The average follow-up was 15 months (range, 12-20 months). All osteotomies healed at an average 5.7 weeks post-operatively, resulting in a total arc of wrist motion of 133 degrees, forearm rotation of 167 degrees, and grip strength of 70% of that of the contralateral side. This treatment method proved to be effective and safe.

Corrective osteotomy for deformity of the distal radius using a volar locking plate

Dorsally angulated malunions of the distal radius have historically been corrected with an opening wedge osteotomy fixed with a dorsal plate. Volar locking plates may facilitate a less morbid approach to corrective osteotomies of the wrist. Eight consecutive patients with an average age of 40 years (range, 15-52 years) underwent correction of a distal radius deformity through a volar approach. Clinical follow-up averaged 17.4 months (range, 7-41 months). Preoperative radiographs revealed an average of 24 degrees of dorsal tilt in patients with dorsal deformity. Postoperatively, their average measurement was <3 degrees of volar tilt. Patients were initially ulnar-positive with an average of 4 mm ulnar-positive variance (range, 2-7 mm). This corrected to less than 1 mm postoperatively. Postoperative disabilities of the arm, shoulder, and hand (DASH), SF-12, and Mayo Wrist scores averaged 10.8, 40.5, and 82.5, respectively. There were no nonunions, and no plates required removal. Distal radius deformity can be effectively addressed through a volar approach with the use of a locking plate.

Management of post-traumatic malunion of fractures of the distal radius

Distal radius malunions are a common cause of patient morbidity. This review of the literature surrounding distal radius malunion covers the demographics, pathologic anatomy, and indications for surgery, surgical techniques, and salvage options. Particular emphasis is placed on subject areas that have not been reviewed as extensively in previous articles, including: intra-articular malunion, computer-assisted techniques, bone graft alternatives, and volar fixed-angle plate osteosynthesis.

Immediate mobilisation following corrective osteotomy of distal radius malunions with cancellous graft and volar fixed angle plates

The purpose of the study was to examine the reliability with which a specific technique of corrective osteotomy of malunions of the distal radius combined with early mobilisation could both restore the normal anatomic parameters of the radius and achieve a functional range of motion with good strength. Corrective osteotomy of the distal radius was performed through a volar approach using a fixed angle volar plate and cancellous bone graft from the iliac crest in 19 patients of mean age 50 years with initial malunions with a mean dorsal tilt of 36 degrees and 7 mm of ulnar variance. An immediate mobilisation programme was started. All healed at a mean of less than 12 weeks (including two heavy smoking patients who required repeat cancellous bone grafting to achieve final union) to achieve a total arc of wrist motion around 120 degrees, forearm rotation of 158 degrees and grip strength which was 80% of contralateral. This treatment strategy was judged to be straightforward and effective.