Immuno-strip biosensor system to detect enrofloxacin residues

Immunochromatographic assays for ultrasensitive and high specific determination of enrofloxacin in milk, eggs, honey, and chicken meat

Enrofloxacin, a veterinary antibiotic that persists in food, poses a risk to human health. Here, a monoclonal antibody against enrofloxacin, 1H12, was prepared based on the hapten ENR-1, and showed excellent sensitivity with a 50% inhibitory concentration (IC₅₀) of 0.03 ng/mL. Using this antibody, 2 lateral-flow immunochromatographic assays were developed for determination of enrofloxacin in egg, milk, honey, and chicken meat samples. The detection ranges (IC₂₀-IC₈₀) were 0.16-0.82 ng/g, 0.24-1.8 ng/g, 0.25-3.6 ng/g, and 0.61-3.9 ng/g by colloidal gold-immunochromatographic sensor (CG-ICS) analysis, and 0.022-0.42 ng/g, 0.054-0.42 ng/g, 0.069-1.4 ng/g, and 0.19-2.2 ng/g by Eu-fluorescence-immunochromatographic sensor (EF-ICS) analysis. The intraassay and interassay recovery rates were 88.9 to 108.5% with coefficients of variation of 1.3 to 7.0% by CG-ICS analysis, and 88.6 to 113.6% with coefficients of variation of 1.3 to 8.1% by EF-ICS analysis. Thus, our newly developed ICS are sensitive and reliable, providing an option for rapid quantitative detection of enrofloxacin in food samples.

Conjugated bimetallic cobalt/iron polyphthalocyanine as an electrochemical aptasensing platform for impedimetric determination of enrofloxacin in diverse environments

The synthesis of bimetallic cobalt/iron polyphthalocyanine (represented by polyCoFePc) network via a modified solid-phase synthesis method is described. It was exploited as a platform for anchoring enrofloxacin (ENR)-targeted aptamer strands, thus, fabricating a label-free impedimetric aptasensor for determination of ENR. The polyCoFePc exhibited a porous two-dimensional (2D) conjugated nanostructure and rich functional groups, and showed a superior binding interaction toward aptamer strands as compared to monometallic polyFePc and polyCoPc networks. This finding was attributed to structural defects and increased active binding sites, thereby giving a highly sensitive detection ability toward ENR. By using electrochemical impedance spectroscopy (EIS), the polyCoFePc-based electrochemical aptasensor exhibited an extremely low detection limit of 0.06 fg mL^-1 within the ENR concentration from 0.1 fg mL^-1 to 100 pg mL^-1, along with high selectivity, good reproducibility, and remarkable stability. Interestingly, the constructed polyCoFePc-based aptasensor also demonstrated wide practicability in various environments. The recoveries of ENR spiked into river water, milk, and pork samples ranged within 91.2 - 107.2%, 90.5 - 109.6%, and 91.2 - 102.3%, respectively.

Rapid detection of chloramphenicol residues in aquatic products using colloidal gold immunochromatographic assay

A colloidal gold immunochromatographic assay (GICA) was developed for rapid detection of chloramphenicol (CAP) residues in aquatic products. A nitrocellulose (NC) membrane was used as the carrier, and the polyclonal CAP antibody was used as the marker protein. The average diameter of as-prepared colloidal gold nanoparticles (AuNPs) was about 20 nm. The optimal pH value of colloidal gold solutions and the amount of the antibody of CAP were 8.0 and 7.2 μg/mL, respectively. The CAP antibody was immobilized onto the conjugate pad after purification. The CAP conjugate and goat anti-rabbit IgG (secondary antibody) were coated onto the NC membrane. Next, the non-specific sites were blocked with 1% bovine serum albumin. The minimum detectable concentration of CAP in standard solution is 0.5 ng/mL, with good reproducibility. For the real samples from crucian carps injected with a single-dose of CAP in the dorsal muscles, the minimum detectable concentration of CAP residues was 0.5 μg/kg. The chromatographic analysis time was less than 10 min, and the strip had a long storage lifetime of more than 90 days at different temperatures. The strips provide a means for rapid detection of CAP residues in aquatic products.

Development of an immunochromatographic strip test for rapid detection of ciprofloxacin in milk samples

A rapid, simple, and sensitive immunochromatographic test strip has been developed for testing residues of ciprofloxacin (CIP). A specific and sensitive monoclonal antibody (mAb) for CIP was generated by immunizing BALB/c mice with well-characterized CIP-Keyhole limpet haemocyanin. Under the optimized conditions, the cut-off limits of test strips for CIP were found to be 5 ng/mL in phosphate-buffered saline and 2.5 ng/mL in milk samples. Each test can be evaluated within 3 min. The cross-reactivities of the CIP test strip to enrofloxacin (ENR), norfloxacin (NOR), nadifloxacin (NDF), danofloxacin (DANO), pefloxacin (PEX), lomefloxacin (LOME), enoxacin (ENO), and sarafloxacin (SAR) were 71.4%, 71.4%, 66%, 50%, 33%, 20%, 12.5%, and 6.25%, respectively. The data indicate that the method is sensitive, specific, and has the advantages of simplicity and speed, therefore, this test strip is a useful screening method for the detection of CIP residues in milk samples.

Surface modified titania nanotubes containing anti-bacterial drugs for controlled delivery nanosystems with high bioactivity

Drug delivery nanosystems have been designed as Enro-NH₂-TNTs and Enro-SH-TNTs with high bioactivity and excellent in vitro and in vivo controlled release.

Development of automated paper-based devices for sequential multistep sandwich enzyme-linked immunosorbent assays using inkjet printing

To the best of our knowledge, this is the first report on paper-based devices for automating the sequential multistep procedures of a sandwich-type enzyme-linked immunosorbent assay (ELISA) that require only a single-step application of the sample solution. The device was based on a piece of nitrocellulose (NC) membrane with specially designed channels, where all the reagents are applied at different locations in order to control the fluid travel to the detection region. The inkjet printing method, a simple and low-cost process, was used to create the flow channel and device barrier patterns. The fabricated barrier was found to be an efficient boundary for the liquid along the printed design in the NC membrane, enabling direct control of the reagent flow time. ELISA results were obtained with a single-step sample application. The developed devices (so-called automated paper-based devices) provided a simple procedure for the sandwich ELISA, while reducing assay time and reagent consumption. Colorimetric results were measured using digital camera imaging with software processing. The capability of the method developed herein was successfully used to determine the levels of human chorionic gonadotropin (hCG) by ELISA.

A sensitive chromatographic strip test for the rapid detection of enrofloxacin in chicken muscle

A sensitive colloidal gold immunochromatography assay using a specific monoclonal antibody was developed for the rapid detection of enrofloxacin (ENR) residues in chicken muscles. Anti-ENR antibodies with high sensitivity and specificity are generated by immunising BALB/c mice with well-characterised ENR-bovine serum albumin conjugate. An orthogonal L₉(3)³ test was designed, and various parameters that influenced the assay performance were investigated and optimised. Under the optimised conditions, the cut-off limits of semi-quantitative test strips for ENR were found to be 3 ng/mL in phosphate-buffered saline and 8 µg/kg in chicken muscle. The ENR test strips showed a 6% cross-reactivity with ciprofloxacin, 3% with norfloxacin, less than 1% with ofloxacin and sarafloxacin and 0.1% with the other eight fluoroquinolones including enoxacin, difloxacin, danofloxacin, pefloxacin, lomefloxacin, sparfloxacin, oxolinic acid and flumequine. Consistent results are produced from the parallel analysis of ENR-contaminated chicken muscle extracts using test strips and ELISA.