Development of poly-o-toluidine zirconium (IV) ethylenediamine as a new adsorbent for nitrate: Equilibrium modelling and thermodynamic studies

Effective removal of doxycycline from aqueous solution using CuO nanoparticles decorated poly(2-acrylamido-2-methyl-1-propanesulfonic acid)/chitosan

The primary focus of the present study was to synthesize CuO nanoparticles decorated poly(2-acrylamido-2-methyl-1-propanesulfonic acid)/chitosan to explore its potential for uptake of doxycycline (DXN) from water. The composite material was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy with energy dispersive X-ray spectroscopy, X-ray diffraction and thermogravimetric analysis-differential thermal analysis. Central composite design under response surface methodology was opted to optimize the process variables (pH, adsorbent dosage, contact time and initial concentration of DXN) for obtaining the highest removal efficiency. The removal of DXN reached 98.84% at 303 K under the optimum conditions of pH 7.0, equilibrating time of 70 min, adsorbent dose of 20 mg/25 mL and initial concentration of 50 mg L-1. The Langmuir isotherm and pseudo-second-order kinetic models fitted best with the experimental data. The values of ΔG° (- 29.159 to - 31.997 kJ mol-1), ΔH° (56.768 kJ mol-1) and ΔS° (283.382 J mol-1 K-1) demonstrated the spontaneous and endothermic nature of adsorption process. The adsorption/desorption study revealed the reusability of the prepared composite material for DXN uptake up to six cycles.

Assessment of ampicillin removal efficiency from aqueous solution by polydopamine/zirconium(iv) iodate: optimization by response surface methodology

Polydopamine/zirconium(iv) iodate was prepared by incorporating polydopamine into zirconium iodate gel and studied as an effective adsorbent for ampicillin. In order to characterize the prepared composite, FTIR, XRD, TGA-DTA, SEM and TEM were used. The effects of experimental variables on ampicillin removal were examined using response surface methodology. The optimum conditions for ampicillin removal were 7, 130 min, 20 mg/20 mL and 50 mg L-1 for pH, contact time, adsorbent dose and initial ampicillin concentration, respectively. Under the optimum conditions, the maximum ampicillin removal percentage was found to be 99.12%. The Langmuir isotherm and pseudo-second-order kinetic models explained the removal process more appropriately. The maximum adsorption capacity at 303 K was 100.0 mg g-1. Thermodynamic study revealed that the ampicillin adsorption was spontaneous and endothermic in nature. The reusability of the prepared material was also explored.

N-(((2-((2-Aminoethyl)amino)ethyl)amino)methyl)-4-sulfamoylbenzamide Impregnated Hydrous Zirconium Oxide as a Novel Adsorbent for Removal of Ni(II) from Aqueous Solutions: Optimization of Variables Using Central Composite Design

In this study, N-(((2-((2-aminoethyl)amino)ethyl)amino)methyl)-4-sulfamoylbenzamide was impregnated into the hydrous zirconium oxide matrix to yield N-(((2-((2-aminoethyl)amino)ethyl)amino)methyl)-4-sulfamoylbenzamide/hydrous zirconium oxide composite (AESB/HZO). The composite material was used to remove Ni(II) from aqueous environment. AESB/HZO was characterized using Fourier transform infrared, scanning electron microscopy with energy dispersive X-ray, and thermogravimetry-differential thermal analyses. An experimental design approach was utilized to model and optimize the variables of adsorption of Ni(II) onto the AESB/HZO composite. Four experimental parameters were selected as independent variables: contact time, pH, adsorbent dose, and initial Ni(II) concentration. A multivariable experimental design was used to establish quadratic model to describe the relationship between percent removal of Ni(II) and four independent variables. At the optimum conditions (contact time: 85 min, pH: 6, adsorbent dose: 10 mg/20 mL, and initial Ni(II) concentration: 20 mg L-1), high removal efficiency (99.35%) was achieved, which is reasonably well predicted by the quadratic model. The sorption of Ni(II) is dependent on pH and ionic strength at pH < 6.0. At low pH, -NH and -NH2 groups are protonated, whereas the -SO2- group is available for binding with Ni(II) and the sorption of Ni(II) is mainly governed by outer sphere surface complexation. In the pH range 6.0-7.5, -NH, -NH2, and -SO2- groups are available for binding with Ni(II) and the sorption is mainly governed by inner-sphere surface complexation. Adsorption isotherm data fitted well to the Langmuir model and the maximum adsorption capacity was found to be 96.03 mg g-1 at 303 K. The results of present investigation demonstrated that AESB/HZO has a good potential for Ni(II) removal from aqueous solution.

Synthesis, characterization and application of a MnFe2O4@poly(o-toluidine) nanocomposite for magnetic solid-phase extraction of polycyclic aromatic hydrocarbons

A nanocomposite of poly(o-toluidine)-coated MnFe₂O₄ magnetic nanoparticles with a core–shell structure was synthesized by the chemical co-precipitation method and employed as a magnetic adsorbent for solid-phase extraction of ten polycyclic aromatic hydrocarbons (PAHs).