Design of a novel optical sensor for determination of trace amounts of copper by UV/vis spectrophotometry in the real samples

AIEE activated Pyrene-Dansyl coupled FRET probe for discriminating detection of lethal Cu2+ and CN-: Bio-Imaging, DNA binding studies and prompt prognosis of Menke's disease

In present work a pyrene-dansyl dyad functionalized chemoreceptor, DPNS is unveiled towards ultrasensitive chromo-fluorogenic detection of heavy and transition metal ions (HTMs) like Cu2+ and pernicious CN-. It demonstrated distinct chromogenic responses; colorless to faint yellow (Cu2+), intense yellow (CN-) from contaminant aqueous sources. Cu2+ instigated alteration in DPNS fluorescence from feeble emission to sparkling green with LOD: 37.75 × 10-9 M, cyan emission for CN- having LOD 61.51 × 10-8M. In particular, chemical scaffold of DPNS consists of -C = N, O = S = O donor entitities that escalates overall polarity thereby providing an excellent binding pocket for simultaneous Cu2+ and CN- recognition with distinct photophysical signaling. Impressively, presence of two fluorophoric moieties triggers FRET, CHEF phenomenon. The conceivable host:guest interactive pathway is manifested by LMCT- FRET-PET-CHEF, C = N isomerization for Cu2+ and ICT-H-bonding for CN-. An exquisite experimental and theoretical corroboration further strengthened the recognition phenomenon. In addition owing to pyrene excimer formation, DPNS exhibits AIEE with increasing water fraction. Notably, DPNS could successfully undergo intracellular tracking of Cu2+ in Tecoma Stans, Peperomia Pellucida. DPNS•••Cu2+ adduct displayed significant intercalative DNA binding activity rationalized by spectral investigation, competitive EB binding, viscosity study. The overall findings, excellent properties endows DPNS a potential contender towards discriminative detection of Cu2+ and CN- like toxic industrial contaminants.

Construction of an optical sensor for copper determination in environmental, food, and biological samples based on the covalently immobilized 2-(2-benzothiazolylazo)-3-hydroxyphenol in agarose

An optical chemical sensor has been developed for the quantitative spectrophotometric analysis of copper. The optode is dependent on covalent immobilization of 2-(2-benzothiazolylazo)-3-hydroxyphenol (BTAHP) in a transparent agarose membrane. The absorbance variation of immobilized BTAHP on agarose as a film upon the addition of 5 × 10-3 M aqueous solutions of Mn2+, Zn2+, Hg2+, Cd2+, Pb2+, Co2+, Ni2+, Fe2+, La3+, Fe3+, Cr3+, Zr4+, Se4+, Th4+, and UO22+ revealed substantially higher changes in the Cu2+ ion content compared to other ions investigated here. The effects of various experimental parameters, such as the solution pH, the reaction time, and the concentration of reagents, on the quality of Cu2+ sensing were examined. Under ideal experimental circumstances, a linear response was achieved for Cu2+ concentrations ranging from 1.0 × 10-9 to 7.5 × 10-6 M with an R2 value of 0.9988. The detection (3σ) and quantification (10σ) limits of the procedure for Cu2+ analyses were 3.0 × 10-10 and 9.8 × 10-10 M, respectively. No observable interference was recorded in the detection of Cu2+ due to other inorganic cations. With no indication of BTAHP leaching, the membrane demonstrated good durability and quick response times. The optode was effectively used to determine the presence of Cu2+ in environmental water, food, and biological samples.

Development and validation of an eco-compatible UV-Vis spectrophotometric method for the determination of Cu2+ in aqueous matrices

Cu2+ are ubiquitous ions in the ecosystem and are responsible of serious environmental pollution. Indeed, the development of sensitive methods for Cu2+ detection is an urgent demand. In this work, we proposed a new spectrophotometric method for Cu2+ determination in different water matrices (distilled water, drinking water, wastewater, and river water). The method employs a bio-based organic ligand namely tetrasodium iminodisuccinate (IDS) able to form a stable complex with the analyte with a maximum absorption at 710 nm. Within the linear range of 6.3-381 mg L-1, the limit of detection (LOD) was determined to be as 1.43 mg L-1. Moreover, the recovery data of the spiked analysis of drinking/river/wastewater water samples were also satisfactory and verified the feasibility of the method for the analysis of Cu2+ in natural conditions. Finally, the AGREE assessment tool was used for a quantitative evaluation of the proposed method and reference method, in agreement with the green analytical chemistry principles. The results showed the lower environmental impact of the proposed method and the suitability of this novel approach for Cu2+ in water matrices.

Silicas with Polyoxyethylene Branches for Modification of Membranes Based on Microporous Block Copolymers

We have synthesized cubic and linear polysiloxanes containing polyoxyethylene branches (ASiP-Cu) using tetraethoxysilane, polyoxyethylene glycol, and copper chloride as precursors; the products are stable to self-condensation. The effect of copper chloride content on the chemical structure of ASiP-Cu has been established. A special study was aimed at defining the modifying effect of ASiP-Cu on the sorption characteristics of membranes based on microporous, optically transparent block copolymers (OBCs). These OBCs were produced using 2,4-toluene diisocyanate and block copolymers of ethylene and propylene oxides. The study demonstrated significantly increased sorption capacity of the modified polymers. On the basis of the modified microporous block copolymers and 1-(2-pyridylazo)-2-naphthol (PAN) analytical reagent, an analytical test system has been developed. Additionally, the modified OBCs have the benefit of high diffusion permeability for molecules of organic dyes and metal ions. It has been shown that the volume of voids and structural features of their internal cavities contribute to the complex formation reaction involving PAN and copper chloride.

Cu-Catalyzed Chan-Evans-Lam Coupling reactions of 2-Nitroimidazole with Aryl boronic acids: An effort toward new bioactive agents against S. pneumoniae

The coupling of phenylboronic acids with poorly-activated imidazoles is studied as a model system to explore the use of copper-catalyzed Chan-Evans-Lam (CEL) coupling for targeted C-N bond forming reactions. Optimized CEL reaction conditions are reported for four phenanthroline-based ligand systems, where the ligand 4,5-diazafluoren-9-one (dafo, L2 ) with 1 molar equivalent of potassium carbonate yielded the highest reactivity. The substrate 2-Nitroimidazole (also known as azomycin) has documented antimicrobial activity against a range of microbes. Here N-arylation of 2-nitroimidazole with a range of aryl boronic acids has been successfully developed by copper(II)-catalyzed CEL reactions. Azomycin and a range of newly arylated azomycin derivatives were screened against S. pneumoniae , where 1-(4-(benzyloxy)phenyl)-2-nitro-1H-imidazole ( 3d ) was demonstrated to have a minimal inhibition concentration value of 3.3 μg/mL.

Optically Transparent Polydimethylsiloxane-Ethylene Oxide-Propylene Oxide Multiblock Copolymers Crosslinked with Isocyanurates as Organic Compound Sorbents

New crosslinked (polydimethylsiloxane-ethylene-propylene oxide)-polyisocyanurate multiblock copolymers (MBCs) were synthesized, and their supramolecular structure and sorption characteristics were studied. It was found that the interaction of PPEG and D₄ leads to polyaddition of D₄ initiated by potassium-alcoholate groups. The use of the amphiphilic silica derivatives associated in an oligomeric medium (ASiPs) leads to structuring of the MBC due to the transetherification reaction of the terminal silanol groups of the MBC with ASiPs. It was established that the supramolecular structure of an MBC is built according to the “core-shell” structure. The obtained polymers were tested as sorbents for the development of new methods for the concentration and determination of inorganic compounds. The efficiency of sorption of reagents increased with an increase in the “thickness” of the polydimethylsiloxane component of the “shell” and with a decrease in the size of the polyisocyanurate “core”. The use of the obtained polymers as adsorbents of organic reagents is promising for increasing the efficiency of field methods of chemical testing and inorganic analysis, including the determination of the elemental composition and the detection of traces of contamination.

Tetrazole conjoined organosilane and organosilatrane via the ‘click approach’: a potent Mycobacterium tuberculosis enoyl ACP reductase inhibitor and a dual sensor for Fe(iii) and Cu(ii) ions

This article includes the synthesis and characterization of tetrazole-allied organosilane and organosilatrane. The tetrazole-allied silatrane was explored for molecular docking and optical aspects.

Mesoporous nanosensors for sensitive monitoring and removal of copper ions in wastewater samples

FHNS nanosensors allow for the ultra-sensitive monitoring and capture of Cu²⁺ ions with a low detection limit and high adsorption capacity.

Structurally designed porous polymer monoliths as probe-anchoring templates as benign and fast responsive solid-state optical sensors for the sensing and recovery of copper ions

In this study, we report on the superior ion-capturing and sensing competence of a new breed of aqua-compatible solid-state ion-sensor using a structurally organized polymer monolith, for the ocular sensing of trace levels of divalent copper ions. The polymer monolithic template exhibits a single block framework with a uniform structural pattern and porous network that serves as an efficient host for the homogeneous probe anchoring, to constitute a renewable solid-state optical sensor. Here, a series of solid-state colorimetric Cu(II) sensors has been designed using three indigenously synthesized chelating probes (molecules) namely, 4-butyl-N-(2-(2,4-dinitrophenyl)hydrazine-1-carbonothioyl)benzamide (BNHCB), 2-(thiophen-2-ylmethylene)hydrazinen-1-carbothioamide (TMHCA), and 4-butylphenyl(diazenyl)-2-mercaptopyrimidine-4,6-diol (BDMPD). The polymer monoliths are characterized using various surface and structural analysis techniques such as HR-SEM, HR-TEM, XPS, XRD, FT-IR, EDAX, and BET surface area analysis. The fabricated solid-state sensors exhibit excellent selectivity and sensitivity for copper ions with unique color transitions that are reliable even at ultra-trace (ppb) levels. The impact of diverse sensing parameters such as solution pH, probe concentration, sensor quantity, target ion concentration, temperature, response kinetics, and matrix tolerances have been optimized. The fabricated sensor materials proffer maximum sensing efficiency in neutral pH conditions, with a limit of detection (L_D) and quantification (L_Q) values of 0.56 and 1.87μg l^-1, 0.30 and 1.0μg l^-1, and 0.12 and 0.42μg l^-1, for BNHCB-, BDMPD-, and TMHCA-anchored polymer sensors, respectively. The proposed reusable solid-state colorimetric sensors are environmentally benign, cost-effective and data reproducible, with superior analytical performance.

Highly selective circular dichroism sensor based on d-penicillamine/cysteamine‑cadmium sulfide quantum dots for copper (II) ion detection

A highly selective circular dichroism sensor based on cysteamine-capped cadmium sulfide quantum dots (Cys-CdS QDs) was successfully developed for the determination of Cu²⁺. Basically, the Cys-CdS QDs are not active in circular dichroism spectroscopy. However, the circular dichroism probe (DPA@Cys-CdS QDs) can be simply generated in situ by mixing achiral Cys-CdS QDs with D-penicillamine. The detection principle was based on measuring the circular dichroism signal change upon the addition of Cu²⁺. The strong CD signal of the DPA@Cys-CdS QDs dramatically decreased in the presence of Cu²⁺, while other cations did not result in any spectral changes. In addition, the degree of the CD signal decrease was linearly proportional to the concentration of Cu²⁺ in the range of 0.50-2.25 μM (r² = 0.9919) with a detection limit of 0.34 μM. Furthermore, the proposed sensor was applied to detect Cu²⁺ in drinking water samples with %recovery values of 102-114% and %RSD less than 6%.

Investigation of photo-induced electron transfer between amino-functionalized graphene quantum dots and selenium nanoparticle and it's application for sensitive fluorescent detection of copper ions

Copper ions play an essential role in some biological processes. Currently, there is a need for the development of convenient and reliable analytical methods for the Cu²⁺ measurement. In the present work, a sensitive fluorescence method was developed for the determination of copper ions. Amino-functionalized graphene quantum dots (af-GQDs) and selenium nanoparticles (Se NPs) were synthetized, respectively, and they were characterized via transmission electron microscope, infrared spectrum analysis and X-ray photoelectron spectrum measurement. Photo-induced electron transfer (PET) between the prepared two nanomaterials could effectively quench the fluorescence of af-GQDs. Cu(II) was reduced to Cu(I) in the presence ascorbic acid and Cu₂Se was finally generated on Se NPs surface, which led to the declined PET efficiency and inhibited the fluorescence quenching of af-GQDs. The change in fluorescence intensity was linearly correlated to the logarithm of the Cu²⁺ concentration from 1 nM to 10 μM, with a detection limit of 0.4 nM under the optimal conditions. The detections of copper ions in water samples were realized via standard addition method and the recovery values varied from 98.7% to 103%. The proposed fluorescence method was also employed to analyze the uptake of Cu²⁺ into human cervical carcinoma HeLa cells and cisplatin-resistant HeLa cells (HeLa/DDP cells). The experimental results indicate that the decreased hCTR1 expression level in HeLa/DDP cells weakened the uptake of copper ions into these drug-resistant tumor cells.

Selective and sensitive spectrophotometric method to determine trace amounts of copper metal ions using Amaranth food dye

Copper is an essential element in some biological processes in organisms, so it was important to find ways to identify trace amounts of it. Minimal amounts of copper ions can be determined in aqueous solutions in the spectrophotometric method suggested in this study. The method depends on the reaction between Cu(II) and Amaranth dye at the pH 6.0. The gradual disappearance of Amaranth colour at 520 nm occurring with an increase of Cu(II) concentration from 0.13 up to 2.0 μg cm^-3. The molar absorptivity coefficient and Sandell's sensitivity of the complex are found to be 0.94 × 10⁴ L mol^-1 cm^-1, 6.8 ng cm^-2 respectively. The advantages of this method are simple, selective, and highly sensitive. The method was used for determination of copper ions in aqueous solutions containing several metal ions, where excellent agreements between reported and obtained results were achieved in aqueous solutions containing copper metal ions only. The postulated method is in an excellent agreement with the determination of Cu(II) ion concentrations by atomic absorption spectroscopy (AAS). The interference was studied to determine the copper metal ions concentration, and do not interfere with eleven of other metal ions.